flipperzero-firmware/firmware/targets/f7/usb-glue/usbd_conf.c

507 lines
15 KiB
C
Raw Normal View History

#include "stm32wbxx.h"
#include "stm32wbxx_hal.h"
#include <furi-hal-vcp_i.h>
#include "usbd_def.h"
#include "usbd_core.h"
#include "usbd_cdc.h"
PCD_HandleTypeDef hpcd_USB_FS;
void Error_Handler(void);
static USBD_StatusTypeDef USBD_Get_USB_Status(HAL_StatusTypeDef hal_status);
static void SystemClockConfig_Resume(void);
void HAL_PCD_MspInit(PCD_HandleTypeDef* pcdHandle) {
GPIO_InitTypeDef GPIO_InitStruct = {0};
if(pcdHandle->Instance==USB) {
__HAL_RCC_GPIOA_CLK_ENABLE();
/**USB GPIO Configuration
PA11 ------> USB_DM
PA12 ------> USB_DP
*/
GPIO_InitStruct.Pin = GPIO_PIN_11|GPIO_PIN_12;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
GPIO_InitStruct.Alternate = GPIO_AF10_USB;
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
/* Peripheral clock enable */
__HAL_RCC_USB_CLK_ENABLE();
/* Peripheral interrupt init */
HAL_NVIC_SetPriority(USB_LP_IRQn, 5, 0);
HAL_NVIC_EnableIRQ(USB_LP_IRQn);
}
}
void HAL_PCD_MspDeInit(PCD_HandleTypeDef* pcdHandle) {
if(pcdHandle->Instance==USB) {
/* Peripheral clock disable */
__HAL_RCC_USB_CLK_DISABLE();
/**USB GPIO Configuration
PA11 ------> USB_DM
PA12 ------> USB_DP
*/
HAL_GPIO_DeInit(GPIOA, GPIO_PIN_11|GPIO_PIN_12);
/* Peripheral interrupt Deinit*/
HAL_NVIC_DisableIRQ(USB_LP_IRQn);
}
}
/** Setup stage callback
* @param hpcd: PCD handle
* @retval None
*/
void HAL_PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd) {
USBD_LL_SetupStage((USBD_HandleTypeDef*)hpcd->pData, (uint8_t *)hpcd->Setup);
}
/** Data Out stage callback.
* @param hpcd: PCD handle
* @param epnum: Endpoint number
* @retval None
*/
void HAL_PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) {
USBD_LL_DataOutStage((USBD_HandleTypeDef*)hpcd->pData, epnum, hpcd->OUT_ep[epnum].xfer_buff);
}
/** Data In stage callback.
* @param hpcd: PCD handle
* @param epnum: Endpoint number
* @retval None
*/
void HAL_PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) {
USBD_LL_DataInStage((USBD_HandleTypeDef*)hpcd->pData, epnum, hpcd->IN_ep[epnum].xfer_buff);
}
/** SOF callback.
* @param hpcd: PCD handle
* @retval None
*/
void HAL_PCD_SOFCallback(PCD_HandleTypeDef *hpcd) {
USBD_LL_SOF((USBD_HandleTypeDef*)hpcd->pData);
}
/** Reset callback.
* @param hpcd: PCD handle
* @retval None
*/
void HAL_PCD_ResetCallback(PCD_HandleTypeDef *hpcd) {
USBD_SpeedTypeDef speed = USBD_SPEED_FULL;
if ( hpcd->Init.speed != PCD_SPEED_FULL) {
Error_Handler();
}
/* Set Speed. */
USBD_LL_SetSpeed((USBD_HandleTypeDef*)hpcd->pData, speed);
/* Reset Device. */
USBD_LL_Reset((USBD_HandleTypeDef*)hpcd->pData);
}
/** Suspend callback.
* When Low power mode is enabled the debug cannot be used (IAR, Keil doesn't support it)
* @param hpcd: PCD handle
* @retval None
*/
void HAL_PCD_SuspendCallback(PCD_HandleTypeDef *hpcd) {
USBD_LL_Suspend((USBD_HandleTypeDef*)hpcd->pData);
furi_hal_vcp_on_usb_suspend();
if (hpcd->Init.low_power_enable) {
/* Set SLEEPDEEP bit and SleepOnExit of Cortex System Control Register. */
SCB->SCR |= (uint32_t)((uint32_t)(SCB_SCR_SLEEPDEEP_Msk | SCB_SCR_SLEEPONEXIT_Msk));
}
}
/** Resume callback.
* When Low power mode is enabled the debug cannot be used (IAR, Keil doesn't support it)
* @param hpcd: PCD handle
* @retval None
*/
void HAL_PCD_ResumeCallback(PCD_HandleTypeDef *hpcd) {
if (hpcd->Init.low_power_enable) {
/* Reset SLEEPDEEP bit of Cortex System Control Register. */
SCB->SCR &= (uint32_t)~((uint32_t)(SCB_SCR_SLEEPDEEP_Msk | SCB_SCR_SLEEPONEXIT_Msk));
SystemClockConfig_Resume();
}
furi_hal_vcp_on_usb_resume();
USBD_LL_Resume((USBD_HandleTypeDef*)hpcd->pData);
}
/** ISOOUTIncomplete callback.
* @param hpcd: PCD handle
* @param epnum: Endpoint number
* @retval None
*/
void HAL_PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) {
USBD_LL_IsoOUTIncomplete((USBD_HandleTypeDef*)hpcd->pData, epnum);
}
/** ISOINIncomplete callback.
* @param hpcd: PCD handle
* @param epnum: Endpoint number
* @retval None
*/
void HAL_PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum) {
USBD_LL_IsoINIncomplete((USBD_HandleTypeDef*)hpcd->pData, epnum);
}
/** Connect callback.
* @param hpcd: PCD handle
* @retval None
*/
void HAL_PCD_ConnectCallback(PCD_HandleTypeDef *hpcd) {
USBD_LL_DevConnected((USBD_HandleTypeDef*)hpcd->pData);
}
/** Disconnect callback.
* @param hpcd: PCD handle
* @retval None
*/
void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd) {
USBD_LL_DevDisconnected((USBD_HandleTypeDef*)hpcd->pData);
}
/** Initializes the low level portion of the device driver.
* @param pdev: Device handle
* @retval USBD status
*/
USBD_StatusTypeDef USBD_LL_Init(USBD_HandleTypeDef *pdev) {
/* Init USB Ip. */
hpcd_USB_FS.pData = pdev;
/* Link the driver to the stack. */
pdev->pData = &hpcd_USB_FS;
/* Enable USB power on Pwrctrl CR2 register. */
HAL_PWREx_EnableVddUSB();
hpcd_USB_FS.Instance = USB;
hpcd_USB_FS.Init.dev_endpoints = 8;
hpcd_USB_FS.Init.speed = PCD_SPEED_FULL;
hpcd_USB_FS.Init.phy_itface = PCD_PHY_EMBEDDED;
hpcd_USB_FS.Init.Sof_enable = DISABLE;
hpcd_USB_FS.Init.low_power_enable = DISABLE;
hpcd_USB_FS.Init.lpm_enable = DISABLE;
hpcd_USB_FS.Init.battery_charging_enable = DISABLE;
if (HAL_PCD_Init(&hpcd_USB_FS) != HAL_OK) {
Error_Handler();
}
HAL_PCDEx_PMAConfig((PCD_HandleTypeDef*)pdev->pData , 0x00 , PCD_SNG_BUF, 0x18);
HAL_PCDEx_PMAConfig((PCD_HandleTypeDef*)pdev->pData , 0x80 , PCD_SNG_BUF, 0x58);
HAL_PCDEx_PMAConfig((PCD_HandleTypeDef*)pdev->pData , 0x81 , PCD_SNG_BUF, 0xC0);
HAL_PCDEx_PMAConfig((PCD_HandleTypeDef*)pdev->pData , 0x01 , PCD_SNG_BUF, 0x110);
HAL_PCDEx_PMAConfig((PCD_HandleTypeDef*)pdev->pData , 0x82 , PCD_SNG_BUF, 0x100);
return USBD_OK;
}
/** De-Initializes the low level portion of the device driver.
* @param pdev: Device handle
* @retval USBD status
*/
USBD_StatusTypeDef USBD_LL_DeInit(USBD_HandleTypeDef *pdev)
{
HAL_StatusTypeDef hal_status = HAL_OK;
USBD_StatusTypeDef usb_status = USBD_OK;
hal_status = HAL_PCD_DeInit(pdev->pData);
usb_status = USBD_Get_USB_Status(hal_status);
return usb_status;
}
/** Starts the low level portion of the device driver.
* @param pdev: Device handle
* @retval USBD status
*/
USBD_StatusTypeDef USBD_LL_Start(USBD_HandleTypeDef *pdev) {
HAL_StatusTypeDef hal_status = HAL_OK;
USBD_StatusTypeDef usb_status = USBD_OK;
hal_status = HAL_PCD_Start(pdev->pData);
usb_status = USBD_Get_USB_Status(hal_status);
return usb_status;
}
/** Stops the low level portion of the device driver.
* @param pdev: Device handle
* @retval USBD status
*/
USBD_StatusTypeDef USBD_LL_Stop(USBD_HandleTypeDef *pdev) {
HAL_StatusTypeDef hal_status = HAL_OK;
USBD_StatusTypeDef usb_status = USBD_OK;
hal_status = HAL_PCD_Stop(pdev->pData);
usb_status = USBD_Get_USB_Status(hal_status);
return usb_status;
}
/** Opens an endpoint of the low level driver.
* @param pdev: Device handle
* @param ep_addr: Endpoint number
* @param ep_type: Endpoint type
* @param ep_mps: Endpoint max packet size
* @retval USBD status
*/
USBD_StatusTypeDef USBD_LL_OpenEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr, uint8_t ep_type, uint16_t ep_mps) {
HAL_StatusTypeDef hal_status = HAL_OK;
USBD_StatusTypeDef usb_status = USBD_OK;
hal_status = HAL_PCD_EP_Open(pdev->pData, ep_addr, ep_mps, ep_type);
usb_status = USBD_Get_USB_Status(hal_status);
return usb_status;
}
/** Closes an endpoint of the low level driver.
* @param pdev: Device handle
* @param ep_addr: Endpoint number
* @retval USBD status
*/
USBD_StatusTypeDef USBD_LL_CloseEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr) {
HAL_StatusTypeDef hal_status = HAL_OK;
USBD_StatusTypeDef usb_status = USBD_OK;
hal_status = HAL_PCD_EP_Close(pdev->pData, ep_addr);
usb_status = USBD_Get_USB_Status(hal_status);
return usb_status;
}
/**
* @brief Flushes an endpoint of the Low Level Driver.
* @param pdev: Device handle
* @param ep_addr: Endpoint number
* @retval USBD status
*/
USBD_StatusTypeDef USBD_LL_FlushEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr) {
HAL_StatusTypeDef hal_status = HAL_OK;
USBD_StatusTypeDef usb_status = USBD_OK;
hal_status = HAL_PCD_EP_Flush(pdev->pData, ep_addr);
usb_status = USBD_Get_USB_Status(hal_status);
return usb_status;
}
/** Sets a Stall condition on an endpoint of the Low Level Driver.
* @param pdev: Device handle
* @param ep_addr: Endpoint number
* @retval USBD status
*/
USBD_StatusTypeDef USBD_LL_StallEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr) {
HAL_StatusTypeDef hal_status = HAL_OK;
USBD_StatusTypeDef usb_status = USBD_OK;
hal_status = HAL_PCD_EP_SetStall(pdev->pData, ep_addr);
usb_status = USBD_Get_USB_Status(hal_status);
return usb_status;
}
/** Clears a Stall condition on an endpoint of the Low Level Driver.
* @param pdev: Device handle
* @param ep_addr: Endpoint number
* @retval USBD status
*/
USBD_StatusTypeDef USBD_LL_ClearStallEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr) {
HAL_StatusTypeDef hal_status = HAL_OK;
USBD_StatusTypeDef usb_status = USBD_OK;
hal_status = HAL_PCD_EP_ClrStall(pdev->pData, ep_addr);
usb_status = USBD_Get_USB_Status(hal_status);
return usb_status;
}
/** Returns Stall condition.
* @param pdev: Device handle
* @param ep_addr: Endpoint number
* @retval Stall (1: Yes, 0: No)
*/
uint8_t USBD_LL_IsStallEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr) {
PCD_HandleTypeDef *hpcd = (PCD_HandleTypeDef*) pdev->pData;
if((ep_addr & 0x80) == 0x80)
{
return hpcd->IN_ep[ep_addr & 0x7F].is_stall;
}
else
{
return hpcd->OUT_ep[ep_addr & 0x7F].is_stall;
}
}
/** Assigns a USB address to the device.
* @param pdev: Device handle
* @param dev_addr: Device address
* @retval USBD status
*/
USBD_StatusTypeDef USBD_LL_SetUSBAddress(USBD_HandleTypeDef *pdev, uint8_t dev_addr) {
HAL_StatusTypeDef hal_status = HAL_OK;
USBD_StatusTypeDef usb_status = USBD_OK;
hal_status = HAL_PCD_SetAddress(pdev->pData, dev_addr);
usb_status = USBD_Get_USB_Status(hal_status);
return usb_status;
}
/** Transmits data over an endpoint.
* @param pdev: Device handle
* @param ep_addr: Endpoint number
* @param pbuf: Pointer to data to be sent
* @param size: Data size
* @retval USBD status
*/
USBD_StatusTypeDef USBD_LL_Transmit(USBD_HandleTypeDef *pdev, uint8_t ep_addr, uint8_t *pbuf, uint32_t size) {
HAL_StatusTypeDef hal_status = HAL_OK;
USBD_StatusTypeDef usb_status = USBD_OK;
hal_status = HAL_PCD_EP_Transmit(pdev->pData, ep_addr, pbuf, size);
usb_status = USBD_Get_USB_Status(hal_status);
return usb_status;
}
/** Prepares an endpoint for reception.
* @param pdev: Device handle
* @param ep_addr: Endpoint number
* @param pbuf: Pointer to data to be received
* @param size: Data size
* @retval USBD status
*/
USBD_StatusTypeDef USBD_LL_PrepareReceive(USBD_HandleTypeDef *pdev, uint8_t ep_addr, uint8_t *pbuf, uint32_t size) {
HAL_StatusTypeDef hal_status = HAL_OK;
USBD_StatusTypeDef usb_status = USBD_OK;
hal_status = HAL_PCD_EP_Receive(pdev->pData, ep_addr, pbuf, size);
usb_status = USBD_Get_USB_Status(hal_status);
return usb_status;
}
/** Returns the last transfered packet size.
* @param pdev: Device handle
* @param ep_addr: Endpoint number
* @retval Recived Data Size
*/
uint32_t USBD_LL_GetRxDataSize(USBD_HandleTypeDef *pdev, uint8_t ep_addr) {
return HAL_PCD_EP_GetRxCount((PCD_HandleTypeDef*) pdev->pData, ep_addr);
}
/** Send LPM message to user layer
* @param hpcd: PCD handle
* @param msg: LPM message
* @retval None
*/
void HAL_PCDEx_LPM_Callback(PCD_HandleTypeDef *hpcd, PCD_LPM_MsgTypeDef msg) {
switch (msg) {
case PCD_LPM_L0_ACTIVE:
if (hpcd->Init.low_power_enable) {
SystemClockConfig_Resume();
/* Reset SLEEPDEEP bit of Cortex System Control Register. */
SCB->SCR &= (uint32_t)~((uint32_t)(SCB_SCR_SLEEPDEEP_Msk | SCB_SCR_SLEEPONEXIT_Msk));
}
USBD_LL_Resume(hpcd->pData);
break;
case PCD_LPM_L1_ACTIVE:
USBD_LL_Suspend(hpcd->pData);
/* Enter in STOP mode. */
if (hpcd->Init.low_power_enable) {
/* Set SLEEPDEEP bit and SleepOnExit of Cortex System Control Register. */
SCB->SCR |= (uint32_t)((uint32_t)(SCB_SCR_SLEEPDEEP_Msk | SCB_SCR_SLEEPONEXIT_Msk));
}
break;
}
}
/** Delays routine for the USB Device Library.
* @param Delay: Delay in ms
* @retval None
*/
void USBD_LL_Delay(uint32_t Delay) {
HAL_Delay(Delay);
}
/** Static single allocation.
* @param size: Size of allocated memory
* @retval None
*/
void *USBD_static_malloc(uint32_t size) {
static uint32_t mem[(sizeof(USBD_CDC_HandleTypeDef)/4)+1];/* On 32-bit boundary */
return mem;
}
/** Dummy memory free
* @param p: Pointer to allocated memory address
* @retval None
*/
void USBD_static_free(void *p) {
}
/** Configures system clock after wake-up from USB resume callBack:
* enable HSI, PLL and select PLL as system clock source.
* @retval None
*/
static void SystemClockConfig_Resume(void) {
}
/** Retuns the USB status depending on the HAL status:
* @param hal_status: HAL status
* @retval USB status
*/
USBD_StatusTypeDef USBD_Get_USB_Status(HAL_StatusTypeDef hal_status) {
USBD_StatusTypeDef usb_status = USBD_OK;
switch (hal_status)
{
case HAL_OK :
usb_status = USBD_OK;
break;
case HAL_ERROR :
usb_status = USBD_FAIL;
break;
case HAL_BUSY :
usb_status = USBD_BUSY;
break;
case HAL_TIMEOUT :
usb_status = USBD_FAIL;
break;
default :
usb_status = USBD_FAIL;
break;
}
return usb_status;
}