liz/flipperzero-firmware
liz/flipperzero-firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
19be061693
flipperzero-firmware/bootloader/targets/f7/target.c

265 lines
12 KiB
C
Raw Normal View History

[FL-1587] RFID: Clock for emulation timer from antenna (#622) * RFID: pull antenna down when emulating * Rfid: fixed HID emulation by adding zero pulse every 4 bits * Rfid: HID emulation fixed with DSP based FSK oscillator. * Rfid: receive 125KHz clock for emulation timer from antenna and comparator * Rfid: commented unused variable * Firmware: rollback changes in f6. * Add F7 target based on F6. * F7/F6: update cube projects, apply changes to the targets, update linker scripts with correct RAM start values. * FuriHal: RFID init routine. * Scripts: update OTP tool for v11 board Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2021-09-10 02:19:02 +00:00
#include <target.h>
#include <stm32wbxx.h>
#include <stm32wbxx_ll_system.h>
#include <stm32wbxx_ll_bus.h>
#include <stm32wbxx_ll_utils.h>
#include <stm32wbxx_ll_rcc.h>
#include <stm32wbxx_ll_rtc.h>
#include <stm32wbxx_ll_pwr.h>
#include <stm32wbxx_ll_gpio.h>
#include <stm32wbxx_hal_flash.h>
#include <lib/toolbox/version.h>
#include <furi-hal.h>
#include <u8g2.h>
const uint8_t I_DFU_128x50[] = {
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF, 0x07, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x38, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0E, 0x00, 0xC0, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x8F, 0x01, 0x00, 0x00, 0x03, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x7F, 0x00, 0x00, 0x00, 0x04, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xC0, 0xFF, 0x00, 0x00, 0x00, 0x08, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0xFF, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0xFF, 0x00, 0x00, 0x00, 0x20, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0x75, 0x00, 0x00, 0xF0, 0x3F, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xFF, 0x0A, 0x00, 0x00, 0x0F, 0x60, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0xE0, 0x0F, 0x00, 0xC0, 0xE0, 0x4F, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x18, 0x00, 0x30, 0x1E, 0x90, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x06, 0x00, 0x18, 0x00, 0x8C, 0x01, 0xA0, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x81, 0xFF, 0x19, 0x00, 0x63, 0x00, 0xC0, 0xF0, 0x07,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x60, 0x5E, 0x1F, 0x80, 0x18, 0x00, 0xE0, 0x0E, 0x18,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x18, 0xAF, 0x0F, 0x40, 0x06, 0x00, 0xF8, 0x01, 0x20,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x06, 0x57, 0x01, 0x20, 0x01, 0x00, 0x78, 0x00, 0x3E,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x84, 0x81, 0xAF, 0x02, 0x90, 0x00, 0x00, 0x38, 0x80, 0x41,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x63, 0x80, 0x57, 0x01, 0x48, 0x00, 0x00, 0x10, 0x60, 0x40,
0x00, 0x00, 0x00, 0x00, 0x00, 0xC0, 0x10, 0x80, 0xAB, 0x00, 0x24, 0x00, 0x00, 0x08, 0x10, 0x40,
0x3F, 0x00, 0x00, 0x00, 0x00, 0x38, 0x0C, 0xC0, 0x57, 0x01, 0x12, 0x00, 0x00, 0x04, 0x08, 0x40,
0xC0, 0x0F, 0x00, 0x00, 0xC0, 0x07, 0x03, 0xF0, 0xAB, 0x00, 0x0A, 0x00, 0x00, 0x02, 0x04, 0x40,
0x00, 0xF0, 0x1F, 0x80, 0x3F, 0xC0, 0x00, 0xFC, 0x55, 0x01, 0x05, 0xE0, 0x00, 0x01, 0x04, 0x40,
0x00, 0x00, 0xE0, 0x7F, 0x00, 0x30, 0x00, 0xFF, 0xAB, 0x00, 0x05, 0xE0, 0x80, 0x00, 0x02, 0x40,
0x0F, 0x00, 0x00, 0x00, 0x80, 0x0F, 0xE0, 0xCF, 0x55, 0x81, 0x02, 0xF0, 0x40, 0x00, 0x02, 0x40,
0xF0, 0x0F, 0x00, 0x00, 0x7F, 0x00, 0xFE, 0xC3, 0xAB, 0x80, 0x02, 0x78, 0x20, 0x00, 0x01, 0x40,
0x00, 0xF0, 0xFF, 0xFF, 0x00, 0xF0, 0xFF, 0xC0, 0xD5, 0x81, 0x01, 0x7E, 0x10, 0x80, 0x00, 0x20,
0x00, 0x00, 0x00, 0x00, 0xC0, 0xFF, 0x0F, 0xE0, 0xFA, 0x83, 0xC1, 0x3F, 0x08, 0x80, 0x00, 0x20,
0x00, 0x00, 0x00, 0x00, 0xFF, 0xFF, 0x01, 0xD8, 0x07, 0x83, 0xF1, 0x1F, 0x04, 0x40, 0x00, 0x20,
0x00, 0xE0, 0xFF, 0xFF, 0xFF, 0x0F, 0x80, 0xC7, 0x01, 0x83, 0xF1, 0x0F, 0x00, 0x20, 0x00, 0x10,
0xE0, 0xFF, 0xFF, 0xFF, 0x3F, 0xC0, 0x7F, 0x40, 0x80, 0x83, 0xE1, 0x01, 0x00, 0x20, 0x00, 0x18,
0xFC, 0xFF, 0xFF, 0xFF, 0x03, 0x3F, 0x00, 0x20, 0xFC, 0x83, 0x01, 0x00, 0x00, 0x10, 0x00, 0x18,
0xFF, 0xFF, 0xFF, 0x3F, 0xF0, 0x00, 0x00, 0x10, 0xD7, 0x01, 0x03, 0x00, 0x00, 0x08, 0x00, 0x1C,
0xFF, 0xFF, 0x01, 0x00, 0x0F, 0x00, 0x00, 0x88, 0xAB, 0x02, 0xE3, 0x01, 0x00, 0x08, 0x00, 0x0C,
0xFF, 0x07, 0x00, 0xE0, 0x00, 0x00, 0x00, 0xC4, 0x55, 0x05, 0x1E, 0x00, 0x00, 0x04, 0x00, 0x0E,
0x7F, 0x00, 0x00, 0x1C, 0x00, 0x00, 0x00, 0xA3, 0xAB, 0x02, 0x06, 0x00, 0x00, 0x02, 0x00, 0x0F,
0x0F, 0x00, 0x80, 0x03, 0x00, 0x00, 0xC0, 0x10, 0x57, 0x05, 0x02, 0x00, 0x00, 0x01, 0x80, 0x07,
0x03, 0x00, 0x70, 0x00, 0x00, 0x00, 0x30, 0x08, 0xAB, 0x0A, 0x02, 0x00, 0xC0, 0x00, 0xC0, 0x07,
0x00, 0x00, 0x0C, 0x00, 0x00, 0x00, 0x0C, 0x84, 0x57, 0x15, 0x01, 0x00, 0x30, 0x00, 0xE0, 0x07,
0x00, 0x00, 0x03, 0x00, 0x00, 0x00, 0x03, 0xC3, 0xFF, 0x2A, 0x01, 0x00, 0x0C, 0x00, 0xF0, 0x0F,
0x00, 0xC0, 0x00, 0x00, 0x00, 0xE0, 0xC0, 0xE0, 0xFE, 0x55, 0x01, 0x82, 0x03, 0x00, 0xF8, 0x15,
0x00, 0x30, 0x00, 0x00, 0x00, 0x1C, 0x30, 0x78, 0xFE, 0xAA, 0x01, 0x7C, 0x00, 0x00, 0xFC, 0x23,
0x00, 0x0E, 0x00, 0x00, 0xC0, 0x03, 0x0C, 0x3C, 0x7F, 0x5D, 0x01, 0x00, 0x00, 0x00, 0xFF, 0x45,
0xC0, 0x01, 0x00, 0x00, 0x3E, 0x00, 0x02, 0x8F, 0xBF, 0xAE, 0x03, 0x00, 0x00, 0xC0, 0xFF, 0x82,
0x30, 0x00, 0x00, 0xC0, 0x01, 0x80, 0xC1, 0x43, 0xFE, 0x5D, 0x01, 0x00, 0x00, 0xF0, 0xFF, 0x05,
0x0F, 0x00, 0x80, 0x3F, 0x00, 0x60, 0xF0, 0x31, 0xF6, 0xAE, 0x03, 0x00, 0x00, 0xFA, 0xAF, 0x02,
0xFC, 0xFF, 0x7F, 0x00, 0x00, 0x18, 0x7C, 0x08, 0x23, 0xFF, 0x05, 0x00, 0x00, 0xFD, 0x55, 0x01,
0x00, 0x00, 0x00, 0x00, 0x00, 0x86, 0x1F, 0x84, 0x30, 0xFE, 0x0A, 0x00, 0x00, 0xAA, 0xAA, 0x00,
0x00, 0x00, 0x00, 0x00, 0x80, 0xF1, 0x07, 0x43, 0x18, 0xFF, 0x15, 0x00, 0x00, 0x54, 0x15, 0x00,
0x00, 0x00, 0x00, 0x00, 0xF8, 0xFF, 0x80, 0x20, 0x8C, 0xFF, 0xAA, 0x00, 0x00, 0x00, 0x00, 0x00,
};
// Boot request enum
#define BOOT_REQUEST_TAINTED 0x00000000
#define BOOT_REQUEST_CLEAN 0xDADEDADE
#define BOOT_REQUEST_DFU 0xDF00B000
// Boot to DFU pin
#define BOOT_DFU_PORT GPIOB
#define BOOT_DFU_PIN LL_GPIO_PIN_11
// USB pins
#define BOOT_USB_PORT GPIOA
#define BOOT_USB_DM_PIN LL_GPIO_PIN_11
#define BOOT_USB_DP_PIN LL_GPIO_PIN_12
#define BOOT_USB_PIN (BOOT_USB_DM_PIN | BOOT_USB_DP_PIN)
#define RTC_CLOCK_IS_READY() (LL_RCC_LSE_IsReady() && LL_RCC_LSI1_IsReady())
uint8_t u8g2_gpio_and_delay_stm32(u8x8_t* u8x8, uint8_t msg, uint8_t arg_int, void* arg_ptr);
uint8_t u8x8_hw_spi_stm32(u8x8_t* u8x8, uint8_t msg, uint8_t arg_int, void* arg_ptr);
void target_led_control(char* c) {
furi_hal_light_set(LightRed, 0x00);
furi_hal_light_set(LightGreen, 0x00);
furi_hal_light_set(LightBlue, 0x00);
do {
if(*c == 'R') {
furi_hal_light_set(LightRed, 0xFF);
} else if(*c == 'G') {
furi_hal_light_set(LightGreen, 0xFF);
} else if(*c == 'B') {
furi_hal_light_set(LightBlue, 0xFF);
} else if(*c == '.') {
LL_mDelay(125);
furi_hal_light_set(LightRed, 0x00);
furi_hal_light_set(LightGreen, 0x00);
furi_hal_light_set(LightBlue, 0x00);
LL_mDelay(125);
} else if(*c == '-') {
LL_mDelay(250);
furi_hal_light_set(LightRed, 0x00);
furi_hal_light_set(LightGreen, 0x00);
furi_hal_light_set(LightBlue, 0x00);
LL_mDelay(250);
} else if(*c == '|') {
furi_hal_light_set(LightRed, 0x00);
furi_hal_light_set(LightGreen, 0x00);
furi_hal_light_set(LightBlue, 0x00);
}
c++;
} while(*c != 0);
}
void target_clock_init() {
LL_Init1msTick(4000000);
LL_SetSystemCoreClock(4000000);
LL_AHB2_GRP1_EnableClock(LL_AHB2_GRP1_PERIPH_GPIOA);
LL_AHB2_GRP1_EnableClock(LL_AHB2_GRP1_PERIPH_GPIOB);
LL_AHB2_GRP1_EnableClock(LL_AHB2_GRP1_PERIPH_GPIOC);
LL_AHB2_GRP1_EnableClock(LL_AHB2_GRP1_PERIPH_GPIOD);
LL_AHB2_GRP1_EnableClock(LL_AHB2_GRP1_PERIPH_GPIOE);
LL_AHB2_GRP1_EnableClock(LL_AHB2_GRP1_PERIPH_GPIOH);
LL_APB2_GRP1_EnableClock(LL_APB2_GRP1_PERIPH_SPI1);
LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_SPI2);
}
void target_gpio_init() {
// USB D+
LL_GPIO_SetPinMode(BOOT_USB_PORT, BOOT_USB_DP_PIN, LL_GPIO_MODE_OUTPUT);
LL_GPIO_SetPinSpeed(BOOT_USB_PORT, BOOT_USB_DP_PIN, LL_GPIO_SPEED_FREQ_VERY_HIGH);
LL_GPIO_SetPinOutputType(BOOT_USB_PORT, BOOT_USB_DP_PIN, LL_GPIO_OUTPUT_OPENDRAIN);
// USB D-
LL_GPIO_SetPinMode(BOOT_USB_PORT, BOOT_USB_DM_PIN, LL_GPIO_MODE_OUTPUT);
LL_GPIO_SetPinSpeed(BOOT_USB_PORT, BOOT_USB_DM_PIN, LL_GPIO_SPEED_FREQ_VERY_HIGH);
LL_GPIO_SetPinOutputType(BOOT_USB_PORT, BOOT_USB_DM_PIN, LL_GPIO_OUTPUT_OPENDRAIN);
// Button: back
LL_GPIO_SetPinMode(BOOT_DFU_PORT, BOOT_DFU_PIN, LL_GPIO_MODE_INPUT);
LL_GPIO_SetPinPull(BOOT_DFU_PORT, BOOT_DFU_PIN, LL_GPIO_PULL_UP);
}
void target_rtc_init() {
// LSE and RTC
LL_PWR_EnableBkUpAccess();
if(!RTC_CLOCK_IS_READY()) {
// Start LSI1 needed for CSS
LL_RCC_LSI1_Enable();
// Try to start LSE normal way
LL_RCC_LSE_SetDriveCapability(LL_RCC_LSEDRIVE_HIGH);
LL_RCC_LSE_Enable();
uint32_t c = 0;
while(!RTC_CLOCK_IS_READY() && c < 200) {
LL_mDelay(10);
c++;
}
// Plan B: reset backup domain
if(!RTC_CLOCK_IS_READY()) {
target_led_control("-R.R.R.");
LL_RCC_ForceBackupDomainReset();
LL_RCC_ReleaseBackupDomainReset();
NVIC_SystemReset();
}
// Set RTC domain clock to LSE
LL_RCC_SetRTCClockSource(LL_RCC_RTC_CLKSOURCE_LSE);
// Enable LSE CSS
LL_RCC_LSE_EnableCSS();
}
// Enable clocking
LL_RCC_EnableRTC();
LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_RTCAPB);
}
void target_version_save(void) {
LL_RTC_BAK_SetRegister(RTC, LL_RTC_BKP_DR1, (uint32_t)version_get());
}
void target_usb_wire_reset() {
LL_GPIO_ResetOutputPin(BOOT_USB_PORT, BOOT_USB_PIN);
}
void target_display_init() {
// Prepare gpio
hal_gpio_init_simple(&gpio_display_rst, GpioModeOutputPushPull);
hal_gpio_init_simple(&gpio_display_di, GpioModeOutputPushPull);
// Initialize
u8g2_t fb;
u8g2_Setup_st7565_erc12864_alt_f(&fb, U8G2_R0, u8x8_hw_spi_stm32, u8g2_gpio_and_delay_stm32);
u8g2_InitDisplay(&fb);
u8g2_SetContrast(&fb, 36);
// Create payload
u8g2_ClearBuffer(&fb);
u8g2_SetDrawColor(&fb, 0x01);
u8g2_SetFont(&fb, u8g2_font_helvB08_tf);
u8g2_DrawXBM(&fb, 0, 64 - 50, 128, 50, I_DFU_128x50);
u8g2_DrawStr(&fb, 2, 8, "Update & Recovery Mode");
u8g2_DrawStr(&fb, 2, 21, "DFU started");
// Send buffer
u8g2_SetPowerSave(&fb, 0);
u8g2_SendBuffer(&fb);
}
void target_init() {
target_clock_init();
target_gpio_init();
furi_hal_init();
target_led_control("RGB");
target_rtc_init();
target_version_save();
target_usb_wire_reset();
// Errata 2.2.9, Flash OPTVERR flag is always set after system reset
__HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_ALL_ERRORS);
}
int target_is_dfu_requested() {
if(LL_RTC_BAK_GetRegister(RTC, LL_RTC_BKP_DR0) == BOOT_REQUEST_TAINTED) {
// Default system state is tainted
// We must ensure that MCU is cleanly booted
LL_RTC_BAK_SetRegister(RTC, LL_RTC_BKP_DR0, BOOT_REQUEST_CLEAN);
NVIC_SystemReset();
} else if(LL_RTC_BAK_GetRegister(RTC, LL_RTC_BKP_DR0) == BOOT_REQUEST_DFU) {
return 1;
}
LL_mDelay(100);
if(!LL_GPIO_IsInputPinSet(BOOT_DFU_PORT, BOOT_DFU_PIN)) {
return 1;
}
return 0;
}
void target_switch(void* offset) {
asm volatile("ldr r3, [%0] \n"
"msr msp, r3 \n"
"ldr r3, [%1] \n"
"mov pc, r3 \n"
:
: "r"(offset), "r"(offset + 0x4)
: "r3");
}
void target_switch2dfu() {
target_led_control("B");
furi_hal_light_set(LightBacklight, 0xFF);
target_display_init();
// Mark system as tainted, it will be soon
LL_RTC_BAK_SetRegister(RTC, LL_RTC_BKP_DR0, BOOT_REQUEST_TAINTED);
// Remap memory to system bootloader
LL_SYSCFG_SetRemapMemory(LL_SYSCFG_REMAP_SYSTEMFLASH);
// Jump
target_switch(0x0);
}
void target_switch2os() {
target_led_control("G");
SCB->VTOR = OS_OFFSET;
target_switch((void*)(BOOT_ADDRESS + OS_OFFSET));
}
Reference in New Issue Copy Permalink