flipperzero-firmware/firmware/targets/f4/Src/fatfs/user_diskio.c

230 lines
6.4 KiB
C
Raw Normal View History

/* USER CODE BEGIN Header */
/**
******************************************************************************
* @file user_diskio.c
* @brief This file includes a diskio driver skeleton to be completed by the user.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under Ultimate Liberty license
* SLA0044, the "License"; You may not use this file except in compliance with
* the License. You may obtain a copy of the License at:
* www.st.com/SLA0044
*
******************************************************************************
*/
/* USER CODE END Header */
#ifdef USE_OBSOLETE_USER_CODE_SECTION_0
/*
* Warning: the user section 0 is no more in use (starting from CubeMx version 4.16.0)
* To be suppressed in the future.
* Kept to ensure backward compatibility with previous CubeMx versions when
* migrating projects.
* User code previously added there should be copied in the new user sections before
* the section contents can be deleted.
*/
/* USER CODE BEGIN 0 */
/* USER CODE END 0 */
#endif
/* USER CODE BEGIN DECL */
/* Includes ------------------------------------------------------------------*/
#include "user_diskio.h"
#include "spi.h"
#include "api-hal-spi.h"
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Disk status */
static volatile DSTATUS Stat = STA_NOINIT;
static DSTATUS User_CheckStatus(BYTE lun) {
Stat = STA_NOINIT;
if(BSP_SD_GetCardState() == MSD_OK) {
Stat &= ~STA_NOINIT;
}
return Stat;
}
/* USER CODE END DECL */
/* Private function prototypes -----------------------------------------------*/
DSTATUS USER_initialize(BYTE pdrv);
DSTATUS USER_status(BYTE pdrv);
DRESULT USER_read(BYTE pdrv, BYTE* buff, DWORD sector, UINT count);
#if _USE_WRITE == 1
DRESULT USER_write(BYTE pdrv, const BYTE* buff, DWORD sector, UINT count);
#endif /* _USE_WRITE == 1 */
#if _USE_IOCTL == 1
DRESULT USER_ioctl(BYTE pdrv, BYTE cmd, void* buff);
#endif /* _USE_IOCTL == 1 */
Diskio_drvTypeDef USER_Driver = {
USER_initialize,
USER_status,
USER_read,
#if _USE_WRITE
USER_write,
#endif /* _USE_WRITE == 1 */
#if _USE_IOCTL == 1
USER_ioctl,
#endif /* _USE_IOCTL == 1 */
};
/* Private functions ---------------------------------------------------------*/
/**
* @brief Initializes a Drive
* @param pdrv: Physical drive number (0..)
* @retval DSTATUS: Operation status
*/
DSTATUS USER_initialize(BYTE pdrv) {
/* USER CODE BEGIN INIT */
// TODO: SPI manager
api_hal_spi_lock(&SPI_SD_HANDLE);
DSTATUS status = User_CheckStatus(pdrv);
// TODO: SPI manager
api_hal_spi_unlock(&SPI_SD_HANDLE);
return status;
/* USER CODE END INIT */
}
/**
* @brief Gets Disk Status
* @param pdrv: Physical drive number (0..)
* @retval DSTATUS: Operation status
*/
DSTATUS USER_status(BYTE pdrv) {
/* USER CODE BEGIN STATUS */
return Stat;
/* USER CODE END STATUS */
}
/**
* @brief Reads Sector(s)
* @param pdrv: Physical drive number (0..)
* @param *buff: Data buffer to store read data
* @param sector: Sector address (LBA)
* @param count: Number of sectors to read (1..128)
* @retval DRESULT: Operation result
*/
DRESULT USER_read(BYTE pdrv, BYTE* buff, DWORD sector, UINT count) {
/* USER CODE BEGIN READ */
DRESULT res = RES_ERROR;
// TODO: SPI manager
api_hal_spi_lock(&SPI_SD_HANDLE);
if(BSP_SD_ReadBlocks((uint32_t*)buff, (uint32_t)(sector), count, SD_DATATIMEOUT) == MSD_OK) {
/* wait until the read operation is finished */
while(BSP_SD_GetCardState() != MSD_OK) {
}
res = RES_OK;
}
// TODO: SPI manager
api_hal_spi_unlock(&SPI_SD_HANDLE);
return res;
/* USER CODE END READ */
}
/**
* @brief Writes Sector(s)
* @param pdrv: Physical drive number (0..)
* @param *buff: Data to be written
* @param sector: Sector address (LBA)
* @param count: Number of sectors to write (1..128)
* @retval DRESULT: Operation result
*/
#if _USE_WRITE == 1
DRESULT USER_write(BYTE pdrv, const BYTE* buff, DWORD sector, UINT count) {
/* USER CODE BEGIN WRITE */
/* USER CODE HERE */
DRESULT res = RES_ERROR;
// TODO: SPI manager
api_hal_spi_lock(&SPI_SD_HANDLE);
if(BSP_SD_WriteBlocks((uint32_t*)buff, (uint32_t)(sector), count, SD_DATATIMEOUT) == MSD_OK) {
/* wait until the Write operation is finished */
while(BSP_SD_GetCardState() != MSD_OK) {
}
res = RES_OK;
}
// TODO: SPI manager
api_hal_spi_unlock(&SPI_SD_HANDLE);
return res;
/* USER CODE END WRITE */
}
#endif /* _USE_WRITE == 1 */
/**
* @brief I/O control operation
* @param pdrv: Physical drive number (0..)
* @param cmd: Control code
* @param *buff: Buffer to send/receive control data
* @retval DRESULT: Operation result
*/
#if _USE_IOCTL == 1
DRESULT USER_ioctl(BYTE pdrv, BYTE cmd, void* buff) {
/* USER CODE BEGIN IOCTL */
DRESULT res = RES_ERROR;
BSP_SD_CardInfo CardInfo;
if(Stat & STA_NOINIT) return RES_NOTRDY;
// TODO: SPI manager
api_hal_spi_lock(&SPI_SD_HANDLE);
switch(cmd) {
/* Make sure that no pending write process */
case CTRL_SYNC:
res = RES_OK;
break;
/* Get number of sectors on the disk (DWORD) */
case GET_SECTOR_COUNT:
BSP_SD_GetCardInfo(&CardInfo);
*(DWORD*)buff = CardInfo.LogBlockNbr;
res = RES_OK;
break;
/* Get R/W sector size (WORD) */
case GET_SECTOR_SIZE:
BSP_SD_GetCardInfo(&CardInfo);
*(WORD*)buff = CardInfo.LogBlockSize;
res = RES_OK;
break;
/* Get erase block size in unit of sector (DWORD) */
case GET_BLOCK_SIZE:
BSP_SD_GetCardInfo(&CardInfo);
*(DWORD*)buff = CardInfo.LogBlockSize;
res = RES_OK;
break;
default:
res = RES_PARERR;
}
// TODO: SPI manager
api_hal_spi_unlock(&SPI_SD_HANDLE);
return res;
/* USER CODE END IOCTL */
}
#endif /* _USE_IOCTL == 1 */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/