2020-10-18 22:09:48 +00:00
# pragma once
# include <stdint.h>
# include <stdlib.h>
# include <stdbool.h>
# include <limits.h>
# include <cmsis_os2.h>
2020-11-06 08:31:59 +00:00
# include <gpio.h>
2020-10-18 22:09:48 +00:00
# include "timer.h"
# include "math.h"
# include "main.h"
2022-01-05 16:10:18 +00:00
# include <furi_hal_gpio.h>
# include <furi_hal_light.h>
# include <furi_hal_spi.h>
2020-10-18 22:09:48 +00:00
FL-53: new NFC worker, A/B/F/V poll and display. (#283)
* GUI: view. Flooper-blooper fix compilation error.
* GUI: view and viewdispatcher bones
* GUI: view implementation, view models, view dispatcher
* GUI: view navigation, model refinement. Power: use view, view dispatcher.
* HAL Flash: proper page write. Dolphin: views. Power: views
* Dolphin: transition idle scree to Views
* Dolphin: input events on stats view. Format sources.
* HAL: flash erase. Dolphin: permanent state storage.
* Dolphin: first start welcome. HAL: flash operation status, errata 2.2.9 crutch.
* NFC: rewrite worker
* NFC: add support for B,F,V.
* NFC: replace rfal irq hanlder with realtime thread, more details about cards.
* Bootloader: LSE and RTS shenanigans, LED control, morse code for LSE failure error.
* F4: stop in Error_Handler
* BLE: handle working FUS, but empty radio stack.
* HAL: alive FUS is now sufficient for flash controller access
* Dolphin: update model after state load
* NFC: detect navigation
* RFAL: use osPriorityISR for isr thread
* NFC: emulation
* Bootloader: rollback incorrectly merged rename
* Dolphin: rollback incorrectly merged changes
* RFAL: remove volatile from thread attr
* RFAL: do not call platform ErrorHandler, error codes is enough
* NFC: improved error handling
* Format sources
* NFC: reset detect view model on start
* Format sources
* update codeowners
* NFC: hide last info if no card detected
2021-01-11 12:42:25 +00:00
typedef void ( * PlatformIrqCallback ) ( ) ;
void platformSetIrqCallback ( PlatformIrqCallback cb ) ;
2021-04-29 08:51:48 +00:00
void platformEnableIrqCallback ( ) ;
void platformDisableIrqCallback ( ) ;
FL-53: new NFC worker, A/B/F/V poll and display. (#283)
* GUI: view. Flooper-blooper fix compilation error.
* GUI: view and viewdispatcher bones
* GUI: view implementation, view models, view dispatcher
* GUI: view navigation, model refinement. Power: use view, view dispatcher.
* HAL Flash: proper page write. Dolphin: views. Power: views
* Dolphin: transition idle scree to Views
* Dolphin: input events on stats view. Format sources.
* HAL: flash erase. Dolphin: permanent state storage.
* Dolphin: first start welcome. HAL: flash operation status, errata 2.2.9 crutch.
* NFC: rewrite worker
* NFC: add support for B,F,V.
* NFC: replace rfal irq hanlder with realtime thread, more details about cards.
* Bootloader: LSE and RTS shenanigans, LED control, morse code for LSE failure error.
* F4: stop in Error_Handler
* BLE: handle working FUS, but empty radio stack.
* HAL: alive FUS is now sufficient for flash controller access
* Dolphin: update model after state load
* NFC: detect navigation
* RFAL: use osPriorityISR for isr thread
* NFC: emulation
* Bootloader: rollback incorrectly merged rename
* Dolphin: rollback incorrectly merged changes
* RFAL: remove volatile from thread attr
* RFAL: do not call platform ErrorHandler, error codes is enough
* NFC: improved error handling
* Format sources
* NFC: reset detect view model on start
* Format sources
* update codeowners
* NFC: hide last info if no card detected
2021-01-11 12:42:25 +00:00
2022-01-05 16:10:18 +00:00
HAL_StatusTypeDef platformSpiTxRx ( const uint8_t * txBuf , uint8_t * rxBuf , uint16_t len ) ;
2020-10-18 22:09:48 +00:00
void platformProtectST25RComm ( ) ;
void platformUnprotectST25RComm ( ) ;
# define ST25R_SS_PIN NFC_CS_Pin
# define ST25R_SS_PORT NFC_CS_GPIO_Port
2020-11-06 08:31:59 +00:00
# define ST25R_INT_PIN NFC_IRQ_Pin
# define ST25R_INT_PORT NFC_IRQ_GPIO_Port
2020-10-18 22:09:48 +00:00
2022-01-05 16:10:18 +00:00
# define RFAL_ANALOG_CONFIG_CUSTOM \
true /*!< Enable/Disable RFAL custom analog configuration */
# define RFAL_FEATURE_LISTEN_MODE \
true /*!< Enable/Disable RFAL support for Listen Mode */
# define RFAL_FEATURE_WAKEUP_MODE \
true /*!< Enable/Disable RFAL support for the Wake-Up mode */
# define RFAL_FEATURE_LOWPOWER_MODE \
true /*!< Enable/Disable RFAL support for the Low Power mode */
# define RFAL_FEATURE_NFCA \
true /*!< Enable/Disable RFAL support for NFC-A (ISO14443A) */
# define RFAL_FEATURE_NFCB \
true /*!< Enable/Disable RFAL support for NFC-B (ISO14443B) */
# define RFAL_FEATURE_NFCF \
true /*!< Enable/Disable RFAL support for NFC-F (FeliCa) */
# define RFAL_FEATURE_NFCV \
true /*!< Enable/Disable RFAL support for NFC-V (ISO15693) */
# define RFAL_FEATURE_T1T \
true /*!< Enable/Disable RFAL support for T1T (Topaz) */
# define RFAL_FEATURE_T2T \
true /*!< Enable/Disable RFAL support for T2T (MIFARE Ultralight) */
# define RFAL_FEATURE_T4T \
true /*!< Enable/Disable RFAL support for T4T */
# define RFAL_FEATURE_ST25TB \
true /*!< Enable/Disable RFAL support for ST25TB */
# define RFAL_FEATURE_ST25xV \
true /*!< Enable/Disable RFAL support for ST25TV/ST25DV */
# define RFAL_FEATURE_DYNAMIC_ANALOG_CONFIG \
false /*!< Enable/Disable Analog Configs to be dynamically updated (RAM) */
# define RFAL_FEATURE_DPO \
false /*!< Enable/Disable RFAL Dynamic Power Output upport */
# define RFAL_FEATURE_ISO_DEP \
true /*!< Enable/Disable RFAL support for ISO-DEP (ISO14443-4) */
# define RFAL_FEATURE_ISO_DEP_POLL \
true /*!< Enable/Disable RFAL support for Poller mode (PCD) ISO-DEP (ISO14443-4) */
# define RFAL_FEATURE_ISO_DEP_LISTEN \
true /*!< Enable/Disable RFAL support for Listen mode (PICC) ISO-DEP (ISO14443-4) */
# define RFAL_FEATURE_NFC_DEP \
true /*!< Enable/Disable RFAL support for NFC-DEP (NFCIP1/P2P) */
# define RFAL_FEATURE_ISO_DEP_IBLOCK_MAX_LEN \
256U /*!< ISO-DEP I-Block max length. Please use values as defined by rfalIsoDepFSx */
# define RFAL_FEATURE_NFC_DEP_BLOCK_MAX_LEN \
254U /*!< NFC-DEP Block/Payload length. Allowed values: 64, 128, 192, 254 */
# define RFAL_FEATURE_NFC_RF_BUF_LEN \
256U /*!< RF buffer length used by RFAL NFC layer */
# define RFAL_FEATURE_ISO_DEP_APDU_MAX_LEN \
512U /*!< ISO-DEP APDU max length. */
# define RFAL_FEATURE_NFC_DEP_PDU_MAX_LEN \
512U /*!< NFC-DEP PDU max length. */
# define platformIrqST25RSetCallback(cb) platformSetIrqCallback(cb)
# define platformProtectST25RIrqStatus() \
platformProtectST25RComm ( ) /*!< Protect unique access to IRQ status var - IRQ disable on single thread environment (MCU) ; Mutex lock on a multi thread environment */
# define platformUnprotectST25RIrqStatus() \
platformUnprotectST25RComm ( ) /*!< Unprotect the IRQ status var - IRQ enable on a single thread environment (MCU) ; Mutex unlock on a multi thread environment */
# define platformGpioSet(port, pin) \
HAL_GPIO_WritePin ( port , pin , GPIO_PIN_SET ) /*!< Turns the given GPIO High */
# define platformGpioClear(port, pin) \
HAL_GPIO_WritePin ( \
port , pin , GPIO_PIN_RESET ) /*!< Turns the given GPIO Low */
# define platformGpioToogle(port, pin) \
HAL_GPIO_TogglePin ( port , pin ) /*!< Toogles the given GPIO */
# define platformGpioIsHigh(port, pin) \
( HAL_GPIO_ReadPin ( port , pin ) = = \
GPIO_PIN_SET ) /*!< Checks if the given LED is High */
# define platformGpioIsLow(port, pin) \
( ! platformGpioIsHigh ( port , pin ) ) /*!< Checks if the given LED is Low */
# define platformTimerCreate(t) \
timerCalculateTimer ( t ) /*!< Create a timer with the given time (ms) */
# define platformTimerIsExpired(timer) \
timerIsExpired ( timer ) /*!< Checks if the given timer is expired */
# define platformDelay(t) osDelay(t) /*!< Performs a delay for the given time (ms) */
# define platformGetSysTick() \
osKernelGetTickCount ( ) /*!< Get System Tick (1 tick = 1 ms) */
# define platformAssert(exp) assert_param(exp) /*!< Asserts whether the given expression is true*/
# define platformSpiSelect() \
platformGpioClear ( \
ST25R_SS_PORT , ST25R_SS_PIN ) /*!< SPI SS\CS: Chip|Slave Select */
# define platformSpiDeselect() \
platformGpioSet ( \
ST25R_SS_PORT , ST25R_SS_PIN ) /*!< SPI SS\CS: Chip|Slave Deselect */
# define platformI2CTx(txBuf, len, last, txOnly) /*!< I2C Transmit */
# define platformI2CRx(txBuf, len) /*!< I2C Receive */
# define platformI2CStart() /*!< I2C Start condition */
# define platformI2CStop() /*!< I2C Stop condition */
# define platformI2CRepeatStart() /*!< I2C Repeat Start */
# define platformI2CSlaveAddrWR(add) /*!< I2C Slave address for Write operation */
# define platformI2CSlaveAddrRD(add) /*!< I2C Slave address for Read operation */
# define platformLog(...) /*!< Log method */
2020-10-18 22:09:48 +00:00
/*
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* RFAL OPTIONAL MACROS ( Do not change )
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
*/
# ifndef platformProtectST25RIrqStatus
2022-01-05 16:10:18 +00:00
# define platformProtectST25RIrqStatus() /*!< Protect unique access to IRQ status var - IRQ disable on single thread environment (MCU) ; Mutex lock on a multi thread environment */
2020-10-18 22:09:48 +00:00
# endif /* platformProtectST25RIrqStatus */
# ifndef platformUnprotectST25RIrqStatus
2022-01-05 16:10:18 +00:00
# define platformUnprotectST25RIrqStatus() /*!< Unprotect the IRQ status var - IRQ enable on a single thread environment (MCU) ; Mutex unlock on a multi thread environment */
2020-10-18 22:09:48 +00:00
# endif /* platformUnprotectST25RIrqStatus */
# ifndef platformProtectWorker
2022-01-05 16:10:18 +00:00
# define platformProtectWorker() /* Protect RFAL Worker/Task/Process from concurrent execution on multi thread platforms */
2020-10-18 22:09:48 +00:00
# endif /* platformProtectWorker */
# ifndef platformUnprotectWorker
2022-01-05 16:10:18 +00:00
# define platformUnprotectWorker() /* Unprotect RFAL Worker/Task/Process from concurrent execution on multi thread platforms */
2020-10-18 22:09:48 +00:00
# endif /* platformUnprotectWorker */
# ifndef platformIrqST25RPinInitialize
2022-01-05 16:10:18 +00:00
# define platformIrqST25RPinInitialize() /*!< Initializes ST25R IRQ pin */
2020-10-18 22:09:48 +00:00
# endif /* platformIrqST25RPinInitialize */
# ifndef platformIrqST25RSetCallback
2022-01-05 16:10:18 +00:00
# define platformIrqST25RSetCallback(cb) /*!< Sets ST25R ISR callback */
2020-10-18 22:09:48 +00:00
# endif /* platformIrqST25RSetCallback */
# ifndef platformLedsInitialize
2022-01-05 16:10:18 +00:00
# define platformLedsInitialize() /*!< Initializes the pins used as LEDs to outputs */
2020-10-18 22:09:48 +00:00
# endif /* platformLedsInitialize */
# ifndef platformLedOff
2022-01-05 16:10:18 +00:00
# define platformLedOff(port, pin) /*!< Turns the given LED Off */
# endif /* platformLedOff */
# ifndef platformLedOn
# define platformLedOn(port, pin) /*!< Turns the given LED On */
# endif /* platformLedOn */
# ifndef platformLedToogle
# define platformLedToogle(port, pin) /*!< Toggles the given LED */
# endif /* platformLedToogle */
# ifndef platformGetSysTick
# define platformGetSysTick() /*!< Get System Tick (1 tick = 1 ms) */
# endif /* platformGetSysTick */
# ifndef platformTimerDestroy
# define platformTimerDestroy(timer) /*!< Stops and released the given timer */
2020-10-18 22:09:48 +00:00
# endif /* platformTimerDestroy */
2022-01-05 16:10:18 +00:00
# ifndef platformAssert
# define platformAssert(exp) /*!< Asserts whether the given expression is true */
2020-10-18 22:09:48 +00:00
# endif /* platformAssert */
2022-01-05 16:10:18 +00:00
# ifndef platformErrorHandle
# define platformErrorHandle() /*!< Global error handler or trap */
2020-10-18 22:09:48 +00:00
# endif /* platformErrorHandle */