flipperzero-firmware/lib/ST25RFAL002/source/rfal_iso15693_2.c

/******************************************************************************
  * \attention
  *
  * <h2><center>&copy; COPYRIGHT 2020 STMicroelectronics</center></h2>
  *
  * Licensed under ST MYLIBERTY SOFTWARE LICENSE AGREEMENT (the "License");
  * You may not use this file except in compliance with the License.
  * You may obtain a copy of the License at:
  *
  *        www.st.com/myliberty
  *
  * Unless required by applicable law or agreed to in writing, software 
  * distributed under the License is distributed on an "AS IS" BASIS, 
  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied,
  * AND SPECIFICALLY DISCLAIMING THE IMPLIED WARRANTIES OF MERCHANTABILITY,
  * FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT.
  * See the License for the specific language governing permissions and
  * limitations under the License.
  *
******************************************************************************/

/*
 *      PROJECT:   ST25R391x firmware
 *      Revision:
 *      LANGUAGE:  ISO C99
 */

/*! \file rfal_iso15693_2.c
 *
 *  \author Ulrich Herrmann
 *
 *  \brief Implementation of ISO-15693-2
 *
 */

/*
******************************************************************************
* INCLUDES
******************************************************************************
*/
#include "rfal_iso15693_2.h"
#include "rfal_crc.h"
#include "utils.h"

/*
 ******************************************************************************
 * ENABLE SWITCH
 ******************************************************************************
 */

#ifndef RFAL_FEATURE_NFCV
#define RFAL_FEATURE_NFCV false /* NFC-V module configuration missing. Disabled by default */
#endif

#if RFAL_FEATURE_NFCV

/*
******************************************************************************
* LOCAL MACROS
******************************************************************************
*/

#define ISO_15693_DEBUG(...) /*!< Macro for the log method  */

/*
******************************************************************************
* LOCAL DEFINES
******************************************************************************
*/
#define ISO15693_DAT_SOF_1_4 0x21 /* LSB constants */
#define ISO15693_DAT_EOF_1_4 0x04
#define ISO15693_DAT_00_1_4 0x02
#define ISO15693_DAT_01_1_4 0x08
#define ISO15693_DAT_10_1_4 0x20
#define ISO15693_DAT_11_1_4 0x80

#define ISO15693_DAT_SOF_1_256 0x81
#define ISO15693_DAT_EOF_1_256 0x04
#define ISO15693_DAT_SLOT0_1_256 0x02
#define ISO15693_DAT_SLOT1_1_256 0x08
#define ISO15693_DAT_SLOT2_1_256 0x20
#define ISO15693_DAT_SLOT3_1_256 0x80

#define ISO15693_PHY_DAT_MANCHESTER_1 0xaaaa

#define ISO15693_PHY_BIT_BUFFER_SIZE \
    1000 /*!< size of the receiving buffer. Might be adjusted if longer datastreams are expected. */

/*
******************************************************************************
* LOCAL VARIABLES
******************************************************************************
*/
static iso15693PhyConfig_t iso15693PhyConfig; /*!< current phy configuration */

/*
******************************************************************************
* LOCAL FUNCTION PROTOTYPES
******************************************************************************
*/
static ReturnCode iso15693PhyVCDCode1Of4(
    const uint8_t data,
    uint8_t* outbuffer,
    uint16_t maxOutBufLen,
    uint16_t* outBufLen);
static ReturnCode iso15693PhyVCDCode1Of256(
    const uint8_t data,
    uint8_t* outbuffer,
    uint16_t maxOutBufLen,
    uint16_t* outBufLen);

/*
******************************************************************************
* GLOBAL FUNCTIONS
******************************************************************************
*/
ReturnCode iso15693PhyConfigure(
    const iso15693PhyConfig_t* config,
    const struct iso15693StreamConfig** needed_stream_config) {
    static struct iso15693StreamConfig stream_config = {
        /* MISRA 8.9 */
        .useBPSK = 0, /* 0: subcarrier, 1:BPSK */
        .din = 5, /* 2^5*fc = 423750 Hz: divider for the in subcarrier frequency */
        .dout = 7, /*!< 2^7*fc = 105937 : divider for the in subcarrier frequency */
        .report_period_length = 3, /*!< 8=2^3 the length of the reporting period */
    };

    /* make a copy of the configuration */
    ST_MEMCPY((uint8_t*)&iso15693PhyConfig, (const uint8_t*)config, sizeof(iso15693PhyConfig_t));

    if(config->speedMode <= 3U) { /* If valid speed mode adjust report period accordingly */
        stream_config.report_period_length = (3U - (uint8_t)config->speedMode);
    } else { /* If invalid default to normal (high) speed */
        stream_config.report_period_length = 3;
    }

    *needed_stream_config = &stream_config;

    return ERR_NONE;
}

ReturnCode iso15693PhyGetConfiguration(iso15693PhyConfig_t* config) {
    ST_MEMCPY(config, &iso15693PhyConfig, sizeof(iso15693PhyConfig_t));

    return ERR_NONE;
}

ReturnCode iso15693VCDCode(
    uint8_t* buffer,
    uint16_t length,
    bool sendCrc,
    bool sendFlags,
    bool picopassMode,
    uint16_t* subbit_total_length,
    uint16_t* offset,
    uint8_t* outbuf,
    uint16_t outBufSize,
    uint16_t* actOutBufSize) {
    ReturnCode err = ERR_NONE;
    uint8_t eof, sof;
    uint8_t transbuf[2];
    uint16_t crc = 0;
    ReturnCode (*txFunc)(
        const uint8_t data, uint8_t* outbuffer, uint16_t maxOutBufLen, uint16_t* outBufLen);
    uint8_t crc_len;
    uint8_t* outputBuf;
    uint16_t outputBufSize;

    crc_len = (uint8_t)((sendCrc) ? 2 : 0);

    *actOutBufSize = 0;

    if(ISO15693_VCD_CODING_1_4 == iso15693PhyConfig.coding) {
        sof = ISO15693_DAT_SOF_1_4;
        eof = ISO15693_DAT_EOF_1_4;
        txFunc = iso15693PhyVCDCode1Of4;
        *subbit_total_length =
            ((1U /* SOF */
              + ((length + (uint16_t)crc_len) * 4U) + 1U) /* EOF */
            );
        if(outBufSize < 5U) { /* 5 should be safe: enough for sof + 1byte data in 1of4 */
            return ERR_NOMEM;
        }
    } else {
        sof = ISO15693_DAT_SOF_1_256;
        eof = ISO15693_DAT_EOF_1_256;
        txFunc = iso15693PhyVCDCode1Of256;
        *subbit_total_length =
            ((1U /* SOF */
              + ((length + (uint16_t)crc_len) * 64U) + 1U) /* EOF */
            );

        if(*offset != 0U) {
            if(outBufSize < 64U) { /* 64 should be safe: enough a single byte data in 1of256 */
                return ERR_NOMEM;
            }
        } else {
            if(outBufSize <
               65U) { /* At beginning of a frame we need at least 65 bytes to start: enough for sof + 1byte data in 1of256 */
                return ERR_NOMEM;
            }
        }
    }

    if(length == 0U) {
        *subbit_total_length = 1;
    }

    if((length != 0U) && (0U == *offset) && sendFlags && !picopassMode) {
        /* set high datarate flag */
        buffer[0] |= (uint8_t)ISO15693_REQ_FLAG_HIGH_DATARATE;
        /* clear sub-carrier flag - we only support single sub-carrier */
        buffer[0] = (uint8_t)(buffer[0] & ~ISO15693_REQ_FLAG_TWO_SUBCARRIERS); /* MISRA 10.3 */
    }

    outputBuf = outbuf; /* MISRA 17.8: Use intermediate variable */
    outputBufSize = outBufSize; /* MISRA 17.8: Use intermediate variable */

    /* Send SOF if at 0 offset */
    if((length != 0U) && (0U == *offset)) {
        *outputBuf = sof;
        (*actOutBufSize)++;
        outputBufSize--;
        outputBuf++;
    }

    while((*offset < length) && (err == ERR_NONE)) {
        uint16_t filled_size;
        /* send data */
        err = txFunc(buffer[*offset], outputBuf, outputBufSize, &filled_size);
        (*actOutBufSize) += filled_size;
        outputBuf = &outputBuf[filled_size]; /* MISRA 18.4: Avoid pointer arithmetic */
        outputBufSize -= filled_size;
        if(err == ERR_NONE) {
            (*offset)++;
        }
    }
    if(err != ERR_NONE) {
        return ERR_AGAIN;
    }

    while((err == ERR_NONE) && sendCrc && (*offset < (length + 2U))) {
        uint16_t filled_size;
        if(0U == crc) {
            crc = rfalCrcCalculateCcitt(
                (uint16_t)((picopassMode) ? 0xE012U : 0xFFFFU), /* In PicoPass Mode a different Preset Value is used   */
                ((picopassMode) ?
                     (buffer + 1U) :
                     buffer), /* CMD byte is not taken into account in PicoPass mode */
                ((picopassMode) ?
                     (length - 1U) :
                     length)); /* CMD byte is not taken into account in PicoPass mode */

            crc = (uint16_t)((picopassMode) ? crc : ~crc);
        }
        /* send crc */
        transbuf[0] = (uint8_t)(crc & 0xffU);
        transbuf[1] = (uint8_t)((crc >> 8) & 0xffU);
        err = txFunc(transbuf[*offset - length], outputBuf, outputBufSize, &filled_size);
        (*actOutBufSize) += filled_size;
        outputBuf = &outputBuf[filled_size]; /* MISRA 18.4: Avoid pointer arithmetic */
        outputBufSize -= filled_size;
        if(err == ERR_NONE) {
            (*offset)++;
        }
    }
    if(err != ERR_NONE) {
        return ERR_AGAIN;
    }

    if((!sendCrc && (*offset == length)) || (sendCrc && (*offset == (length + 2U)))) {
        *outputBuf = eof;
        (*actOutBufSize)++;
        outputBufSize--;
        outputBuf++;
    } else {
        return ERR_AGAIN;
    }

    return err;
}

ReturnCode iso15693VICCDecode(
    const uint8_t* inBuf,
    uint16_t inBufLen,
    uint8_t* outBuf,
    uint16_t outBufLen,
    uint16_t* outBufPos,
    uint16_t* bitsBeforeCol,
    uint16_t ignoreBits,
    bool picopassMode) {
    ReturnCode err = ERR_NONE;
    uint16_t crc;
    uint16_t mp; /* Current bit position in manchester bit inBuf*/
    uint16_t bp; /* Current bit position in outBuf */

    *bitsBeforeCol = 0;
    *outBufPos = 0;

    /* first check for valid SOF. Since it starts with 3 unmodulated pulses it is 0x17. */
    if((inBuf[0] & 0x1fU) != 0x17U) {
        ISO_15693_DEBUG("0x%x\n", iso15693PhyBitBuffer[0]);
        return ERR_FRAMING;
    }
    ISO_15693_DEBUG("SOF\n");

    if(outBufLen == 0U) {
        return ERR_NONE;
    }

    mp = 5; /* 5 bits were SOF, now manchester starts: 2 bits per payload bit */
    bp = 0;

    ST_MEMSET(outBuf, 0, outBufLen);

    if(inBufLen == 0U) {
        return ERR_CRC;
    }

    for(; mp < ((inBufLen * 8U) - 2U); mp += 2U) {
        bool isEOF = false;

        uint8_t man;
        man = (inBuf[mp / 8U] >> (mp % 8U)) & 0x1U;
        man |= ((inBuf[(mp + 1U) / 8U] >> ((mp + 1U) % 8U)) & 0x1U) << 1;
        if(1U == man) {
            bp++;
        }
        if(2U == man) {
            outBuf[bp / 8U] = (uint8_t)(outBuf[bp / 8U] | (1U << (bp % 8U))); /* MISRA 10.3 */
            bp++;
        }
        if((bp % 8U) == 0U) { /* Check for EOF */
            ISO_15693_DEBUG("ceof %hhx %hhx\n", inBuf[mp / 8U], inBuf[mp / 8 + 1]);
            if(((inBuf[mp / 8U] & 0xe0U) == 0xa0U) &&
               (inBuf[(mp / 8U) + 1U] == 0x03U)) { /* Now we know that it was 10111000 = EOF */
                ISO_15693_DEBUG("EOF\n");
                isEOF = true;
            }
        }
        if(((0U == man) || (3U == man)) && !isEOF) {
            if(bp >= ignoreBits) {
                err = ERR_RF_COLLISION;
            } else {
                /* ignored collision: leave as 0 */
                bp++;
            }
        }
        if((bp >= (outBufLen * 8U)) || (err == ERR_RF_COLLISION) ||
           isEOF) { /* Don't write beyond the end */
            break;
        }
    }

    *outBufPos = (bp / 8U);
    *bitsBeforeCol = bp;

    if(err != ERR_NONE) {
        return err;
    }

    if((bp % 8U) != 0U) {
        return ERR_CRC;
    }

    if(*outBufPos > 2U) {
        /* finally, check crc */
        ISO_15693_DEBUG("Calculate CRC, val: 0x%x, outBufLen: ", *outBuf);
        ISO_15693_DEBUG("0x%x ", *outBufPos - 2);

        crc = rfalCrcCalculateCcitt(((picopassMode) ? 0xE012U : 0xFFFFU), outBuf, *outBufPos - 2U);
        crc = (uint16_t)((picopassMode) ? crc : ~crc);

        if(((crc & 0xffU) == outBuf[*outBufPos - 2U]) &&
           (((crc >> 8U) & 0xffU) == outBuf[*outBufPos - 1U])) {
            err = ERR_NONE;
            ISO_15693_DEBUG("OK\n");
        } else {
            ISO_15693_DEBUG("error! Expected: 0x%x, got ", crc);
            ISO_15693_DEBUG("0x%hhx 0x%hhx\n", outBuf[*outBufPos - 2], outBuf[*outBufPos - 1]);
            err = ERR_CRC;
        }
    } else {
        err = ERR_CRC;
    }

    return err;
}

/*
******************************************************************************
* LOCAL FUNCTIONS
******************************************************************************
*/
/*! 
 *****************************************************************************
 *  \brief  Perform 1 of 4 coding and send coded data
 *
 *  This function takes \a length bytes from \a buffer, perform 1 of 4 coding
 *  (see ISO15693-2 specification) and sends the data using stream mode.
 *
 *  \param[in] sendSof : send SOF prior to data.
 *  \param[in] buffer : data to send.
 *  \param[in] length : number of bytes to send.
 *
 *  \return ERR_IO : Error during communication.
 *  \return ERR_NONE : No error.
 *
 *****************************************************************************
 */
static ReturnCode iso15693PhyVCDCode1Of4(
    const uint8_t data,
    uint8_t* outbuffer,
    uint16_t maxOutBufLen,
    uint16_t* outBufLen) {
    uint8_t tmp;
    ReturnCode err = ERR_NONE;
    uint16_t a;
    uint8_t* outbuf = outbuffer;

    *outBufLen = 0;

    if(maxOutBufLen < 4U) {
        return ERR_NOMEM;
    }

    tmp = data;
    for(a = 0; a < 4U; a++) {
        switch(tmp & 0x3U) {
        case 0:
            *outbuf = ISO15693_DAT_00_1_4;
            break;
        case 1:
            *outbuf = ISO15693_DAT_01_1_4;
            break;
        case 2:
            *outbuf = ISO15693_DAT_10_1_4;
            break;
        case 3:
            *outbuf = ISO15693_DAT_11_1_4;
            break;
        default:
            /* MISRA 16.4: mandatory default statement */
            break;
        }
        outbuf++;
        (*outBufLen)++;
        tmp >>= 2;
    }
    return err;
}

/*! 
 *****************************************************************************
 *  \brief  Perform 1 of 256 coding and send coded data
 *
 *  This function takes \a length bytes from \a buffer, perform 1 of 256 coding
 *  (see ISO15693-2 specification) and sends the data using stream mode.
 *  \note This function sends SOF prior to the data.
 *
 *  \param[in] sendSof : send SOF prior to data.
 *  \param[in] buffer : data to send.
 *  \param[in] length : number of bytes to send.
 *
 *  \return ERR_IO : Error during communication.
 *  \return ERR_NONE : No error.
 *
 *****************************************************************************
 */
static ReturnCode iso15693PhyVCDCode1Of256(
    const uint8_t data,
    uint8_t* outbuffer,
    uint16_t maxOutBufLen,
    uint16_t* outBufLen) {
    uint8_t tmp;
    ReturnCode err = ERR_NONE;
    uint16_t a;
    uint8_t* outbuf = outbuffer;

    *outBufLen = 0;

    if(maxOutBufLen < 64U) {
        return ERR_NOMEM;
    }

    tmp = data;
    for(a = 0; a < 64U; a++) {
        switch(tmp) {
        case 0:
            *outbuf = ISO15693_DAT_SLOT0_1_256;
            break;
        case 1:
            *outbuf = ISO15693_DAT_SLOT1_1_256;
            break;
        case 2:
            *outbuf = ISO15693_DAT_SLOT2_1_256;
            break;
        case 3:
            *outbuf = ISO15693_DAT_SLOT3_1_256;
            break;
        default:
            *outbuf = 0;
            break;
        }
        outbuf++;
        (*outBufLen)++;
        tmp -= 4U;
    }

    return err;
}

#endif /* RFAL_FEATURE_NFCV */