flipperzero-firmware/firmware/targets/f4/api-hal/api-hal-light.c

55 lines
1.8 KiB
C
Raw Normal View History

#include <api-hal-light.h>
#include <stm32wbxx_ll_gpio.h>
// LCD backlight
#define BOOT_LCD_BL_PORT GPIOA
#define BOOT_LCD_BL_PIN LL_GPIO_PIN_15
// LEDs
#define LED_RED_PORT GPIOA
#define LED_RED_PIN LL_GPIO_PIN_1
#define LED_GREEN_PORT GPIOA
#define LED_GREEN_PIN LL_GPIO_PIN_2
#define LED_BLUE_PORT GPIOA
#define LED_BLUE_PIN LL_GPIO_PIN_3
static void api_hal_light_gpio_set(GPIO_TypeDef* port, uint32_t pin, uint8_t value) {
if (value) {
LL_GPIO_ResetOutputPin(port, pin);
} else {
LL_GPIO_SetOutputPin(port, pin);
}
}
void api_hal_light_init() {
LL_GPIO_SetPinMode(BOOT_LCD_BL_PORT, BOOT_LCD_BL_PIN, LL_GPIO_MODE_OUTPUT);
LL_GPIO_SetPinSpeed(BOOT_LCD_BL_PORT, BOOT_LCD_BL_PIN, LL_GPIO_SPEED_FREQ_LOW);
LL_GPIO_SetPinOutputType(BOOT_LCD_BL_PORT, BOOT_LCD_BL_PIN, LL_GPIO_OUTPUT_PUSHPULL);
LL_GPIO_SetPinMode(LED_RED_PORT, LED_RED_PIN, LL_GPIO_MODE_OUTPUT);
LL_GPIO_SetPinOutputType(LED_RED_PORT, LED_RED_PIN, LL_GPIO_OUTPUT_OPENDRAIN);
LL_GPIO_SetPinMode(LED_GREEN_PORT, LED_GREEN_PIN, LL_GPIO_MODE_OUTPUT);
LL_GPIO_SetPinOutputType(LED_GREEN_PORT, LED_GREEN_PIN, LL_GPIO_OUTPUT_OPENDRAIN);
LL_GPIO_SetPinMode(LED_BLUE_PORT, LED_BLUE_PIN, LL_GPIO_MODE_OUTPUT);
LL_GPIO_SetPinOutputType(LED_BLUE_PORT, LED_BLUE_PIN, LL_GPIO_OUTPUT_OPENDRAIN);
}
void api_hal_light_set(Light light, uint8_t value) {
switch(light) {
case LightRed:
api_hal_light_gpio_set(LED_RED_PORT, LED_RED_PIN, value);
break;
case LightGreen:
api_hal_light_gpio_set(LED_GREEN_PORT, LED_GREEN_PIN, value);
break;
case LightBlue:
api_hal_light_gpio_set(LED_BLUE_PORT, LED_BLUE_PIN, value);
break;
case LightBacklight:
api_hal_light_gpio_set(BOOT_LCD_BL_PORT, BOOT_LCD_BL_PIN, !value);
break;
default:
break;
}
}