flipperzero-firmware/firmware/targets/f4/api-hal/api-hal-resources.h

81 lines
1.7 KiB
C
Raw Normal View History

Firmware, Bootloader: add f3 target. (#215) * Firmware, Bootloader: add f3 target. Refactor code to be portable across targets. * Firmware: remove bkpt * Makefile: debug agent. Debug: f3 platform throw openocd. * freertos-openocd helper * separate hal resources * return of input_dump app * using hew target resources abstration layer for backlight and blink * dirty hack for input driver, f3 has no charging pin * worked input interrupts * working display * F3: switch to 32mHz resonator * F3: configure SD_CS pin * NFC: port to F3. * fat uart app * sd card hal api * separate CC1101 spi config * faster spi gpio for sd card * Assets: disable LFS * Cube: disable css on LSE * Input: format code * Make: add bootloader source code to formatting rule * F3: enable rf by default, adjust clock settings, map all pins where they should be. * libs for coreglitch_demo_0 * nvic priority * bus clocks all to 64 * lf-rfid timer and pin * irda * ir rx setup * tim2 irq handler * Makefile: environment aware mkdir * Makefile, Irukagotchi: commit seq number. * split falling and rising ir rx events * Makefile: proper git branch detect on old git. Firmware: api fix. * fix irda * Makefile,Irukagotchi: date timestamp. * NFC: adjust SPI speed * Irukagotchi: format code * Make: add blackmagic debug in host mode * Makefile: detach blackmagic from terminal signals * Makefile,Irukagotchi: stamp target * add F3 bootloader/firmware to CI Co-authored-by: Aleksandr Kutuzov <aku@plooks.com> Co-authored-by: DrZlo13 <who.just.the.doctor@gmail.com> Co-authored-by: aanper <mail@s3f.ru>
2020-11-06 10:52:50 +00:00
#pragma once
Firmware, Bootloader: add f3 target. (#215) * Firmware, Bootloader: add f3 target. Refactor code to be portable across targets. * Firmware: remove bkpt * Makefile: debug agent. Debug: f3 platform throw openocd. * freertos-openocd helper * separate hal resources * return of input_dump app * using hew target resources abstration layer for backlight and blink * dirty hack for input driver, f3 has no charging pin * worked input interrupts * working display * F3: switch to 32mHz resonator * F3: configure SD_CS pin * NFC: port to F3. * fat uart app * sd card hal api * separate CC1101 spi config * faster spi gpio for sd card * Assets: disable LFS * Cube: disable css on LSE * Input: format code * Make: add bootloader source code to formatting rule * F3: enable rf by default, adjust clock settings, map all pins where they should be. * libs for coreglitch_demo_0 * nvic priority * bus clocks all to 64 * lf-rfid timer and pin * irda * ir rx setup * tim2 irq handler * Makefile: environment aware mkdir * Makefile, Irukagotchi: commit seq number. * split falling and rising ir rx events * Makefile: proper git branch detect on old git. Firmware: api fix. * fix irda * Makefile,Irukagotchi: date timestamp. * NFC: adjust SPI speed * Irukagotchi: format code * Make: add blackmagic debug in host mode * Makefile: detach blackmagic from terminal signals * Makefile,Irukagotchi: stamp target * add F3 bootloader/firmware to CI Co-authored-by: Aleksandr Kutuzov <aku@plooks.com> Co-authored-by: DrZlo13 <who.just.the.doctor@gmail.com> Co-authored-by: aanper <mail@s3f.ru>
2020-11-06 10:52:50 +00:00
#include "main.h"
[FL-140] Core api dynamic records (#296) * SYSTEM: tickless mode with deep sleep. * Move FreeRTOS ticks to lptim2 * API: move all sumbodules init routines to one place. Timebase: working lptim2 at tick source. * API Timebase: lp-timer routines, timer access safe zones prediction and synchronization. FreeRTOS: adjust configuration for tickless mode. * NFC: support for tickless mode. * API Timebase: improve tick error handling in IRQ. Apploader: use insomnia mode to run applications. * BLE: prevent sleep while core2 starting * HAL: nap while in insomnia mode * init records work * try to implement record delete * tests and flapp * flapp subsystem * new core functions to get app stat, simplify core code * fix thread termination * add strdup to core * fix tests * Refactoring: remove all unusued parts, update API usage, aggreagate API sources and headers, new record storage * Refactoring: update furi record api usage, cleanup code * Fix broken merge for freertos apps * Core, Target: fix compilation warnings * Drop firmware target local * HAL Timebase, Power, Clock: semaphore guarded access to clock and power modes, better sleep mode. * SD-Filesystem: wait for all deps to arrive before adding widget. Core, BLE: disable debug dump to serial. * delete old app example-ipc * delete old app fatfs list * fix strobe app, add input header * delete old display driver * comment old app qr-code * fix sd-card test, add forced widget update * remove unused new core test * increase heap to 128k * comment and assert old core tests * fix syntax Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2021-01-20 16:09:26 +00:00
#include <furi.h>
Firmware, Bootloader: add f3 target. (#215) * Firmware, Bootloader: add f3 target. Refactor code to be portable across targets. * Firmware: remove bkpt * Makefile: debug agent. Debug: f3 platform throw openocd. * freertos-openocd helper * separate hal resources * return of input_dump app * using hew target resources abstration layer for backlight and blink * dirty hack for input driver, f3 has no charging pin * worked input interrupts * working display * F3: switch to 32mHz resonator * F3: configure SD_CS pin * NFC: port to F3. * fat uart app * sd card hal api * separate CC1101 spi config * faster spi gpio for sd card * Assets: disable LFS * Cube: disable css on LSE * Input: format code * Make: add bootloader source code to formatting rule * F3: enable rf by default, adjust clock settings, map all pins where they should be. * libs for coreglitch_demo_0 * nvic priority * bus clocks all to 64 * lf-rfid timer and pin * irda * ir rx setup * tim2 irq handler * Makefile: environment aware mkdir * Makefile, Irukagotchi: commit seq number. * split falling and rising ir rx events * Makefile: proper git branch detect on old git. Firmware: api fix. * fix irda * Makefile,Irukagotchi: date timestamp. * NFC: adjust SPI speed * Irukagotchi: format code * Make: add blackmagic debug in host mode * Makefile: detach blackmagic from terminal signals * Makefile,Irukagotchi: stamp target * add F3 bootloader/firmware to CI Co-authored-by: Aleksandr Kutuzov <aku@plooks.com> Co-authored-by: DrZlo13 <who.just.the.doctor@gmail.com> Co-authored-by: aanper <mail@s3f.ru>
2020-11-06 10:52:50 +00:00
#include <stm32wbxx.h>
#include <stm32wbxx_ll_gpio.h>
#ifdef __cplusplus
extern "C" {
#endif
#define POWER_I2C_SCL_Pin LL_GPIO_PIN_9
#define POWER_I2C_SCL_GPIO_Port GPIOA
#define POWER_I2C_SDA_Pin LL_GPIO_PIN_10
#define POWER_I2C_SDA_GPIO_Port GPIOA
#define POWER_I2C I2C1
/** Timing register value is computed with the STM32CubeMX Tool,
* Fast Mode @100kHz with I2CCLK = 64 MHz,
* rise time = 0ns, fall time = 0ns
*/
#define POWER_I2C_TIMINGS 0x10707DBC
/* Input Related Constants */
#define INPUT_DEBOUNCE_TICKS 20
Firmware, Bootloader: add f3 target. (#215) * Firmware, Bootloader: add f3 target. Refactor code to be portable across targets. * Firmware: remove bkpt * Makefile: debug agent. Debug: f3 platform throw openocd. * freertos-openocd helper * separate hal resources * return of input_dump app * using hew target resources abstration layer for backlight and blink * dirty hack for input driver, f3 has no charging pin * worked input interrupts * working display * F3: switch to 32mHz resonator * F3: configure SD_CS pin * NFC: port to F3. * fat uart app * sd card hal api * separate CC1101 spi config * faster spi gpio for sd card * Assets: disable LFS * Cube: disable css on LSE * Input: format code * Make: add bootloader source code to formatting rule * F3: enable rf by default, adjust clock settings, map all pins where they should be. * libs for coreglitch_demo_0 * nvic priority * bus clocks all to 64 * lf-rfid timer and pin * irda * ir rx setup * tim2 irq handler * Makefile: environment aware mkdir * Makefile, Irukagotchi: commit seq number. * split falling and rising ir rx events * Makefile: proper git branch detect on old git. Firmware: api fix. * fix irda * Makefile,Irukagotchi: date timestamp. * NFC: adjust SPI speed * Irukagotchi: format code * Make: add blackmagic debug in host mode * Makefile: detach blackmagic from terminal signals * Makefile,Irukagotchi: stamp target * add F3 bootloader/firmware to CI Co-authored-by: Aleksandr Kutuzov <aku@plooks.com> Co-authored-by: DrZlo13 <who.just.the.doctor@gmail.com> Co-authored-by: aanper <mail@s3f.ru>
2020-11-06 10:52:50 +00:00
/* Input Keys */
typedef enum {
InputKeyUp,
InputKeyDown,
InputKeyRight,
InputKeyLeft,
InputKeyOk,
InputKeyBack,
} InputKey;
/* Light */
typedef enum {
LightRed,
LightGreen,
LightBlue,
LightBacklight,
} Light;
typedef struct {
const GPIO_TypeDef* port;
const uint16_t pin;
const InputKey key;
const bool inverted;
} InputPin;
extern const InputPin input_pins[];
extern const size_t input_pins_count;
Firmware, Bootloader: add f3 target. (#215) * Firmware, Bootloader: add f3 target. Refactor code to be portable across targets. * Firmware: remove bkpt * Makefile: debug agent. Debug: f3 platform throw openocd. * freertos-openocd helper * separate hal resources * return of input_dump app * using hew target resources abstration layer for backlight and blink * dirty hack for input driver, f3 has no charging pin * worked input interrupts * working display * F3: switch to 32mHz resonator * F3: configure SD_CS pin * NFC: port to F3. * fat uart app * sd card hal api * separate CC1101 spi config * faster spi gpio for sd card * Assets: disable LFS * Cube: disable css on LSE * Input: format code * Make: add bootloader source code to formatting rule * F3: enable rf by default, adjust clock settings, map all pins where they should be. * libs for coreglitch_demo_0 * nvic priority * bus clocks all to 64 * lf-rfid timer and pin * irda * ir rx setup * tim2 irq handler * Makefile: environment aware mkdir * Makefile, Irukagotchi: commit seq number. * split falling and rising ir rx events * Makefile: proper git branch detect on old git. Firmware: api fix. * fix irda * Makefile,Irukagotchi: date timestamp. * NFC: adjust SPI speed * Irukagotchi: format code * Make: add blackmagic debug in host mode * Makefile: detach blackmagic from terminal signals * Makefile,Irukagotchi: stamp target * add F3 bootloader/firmware to CI Co-authored-by: Aleksandr Kutuzov <aku@plooks.com> Co-authored-by: DrZlo13 <who.just.the.doctor@gmail.com> Co-authored-by: aanper <mail@s3f.ru>
2020-11-06 10:52:50 +00:00
extern const GpioPin vibro_gpio;
2020-11-16 21:39:48 +00:00
extern const GpioPin ibutton_gpio;
extern const GpioPin cc1101_g0_gpio;
extern const GpioPin gpio_subghz_cs;
extern const GpioPin gpio_display_cs;
extern const GpioPin gpio_subghz_cs;
extern const GpioPin gpio_display_cs;
extern const GpioPin gpio_display_rst;
extern const GpioPin gpio_display_di;
extern const GpioPin gpio_sdcard_cs;
extern const GpioPin gpio_nfc_cs;
extern const GpioPin gpio_spi_d_miso;
extern const GpioPin gpio_spi_d_mosi;
extern const GpioPin gpio_spi_d_sck;
extern const GpioPin gpio_spi_r_miso;
extern const GpioPin gpio_spi_r_mosi;
extern const GpioPin gpio_spi_r_sck;
new iButton app (#328) * rename old ibutton app to ibutton-test * more renames * updated onewire library compilation condition * add submenu_clean subroutine * add index for submenu callback * c++ guard for gui modules * add released ibutton app * fix the position of the submenu window if there are too few items * iButton app basis * negative icon position info * fix submenu_clean subroutine * add ibutton app to applications makefile * add onewire key read routine to read mode * rename mode to scene * rename files and folder (mode to scene) * rename ibutton view to view manager * rename get_view to get_view_manager * cpp guards * key read, store and notify features * syntax fix * make iButtonScene functions pure virtual * fix syntax * add text store, add new scene (crc error) * not a key scene * syntax fix * read success scene * app, switching to the previous scene with the number of scenes to be skipped * scene whith menu when key is readed * fix font height calculation, fix offsets * add key write scene * view_dispatcher_remove_view subroutine * generic pause/resume os methods * fix furi_assert usage * key store, worker * fix pointer comparsion * saved keys, saved key action scenes * key delete/confirm delete scenes and routines * use last input subsystem changes * fix syntax * fix new model usage in submenu * fix includes * use vibro pin * use stored key name if valid * emulate scene * random name generator * name and save readed key scenes, new icon * fix icon position * fix text scene exit * fix naming, fix text placement, new info scene * state-driven cyfral decoder * better cyfral decoder * better cyfral decoder * one wire: search command set * metakom decoder * more key types * add next scene to error scenes * universal key reader * use new key reader * syntax fix * warning fix * byte input module template * new thread and insomnia api usage * New element: slightly rounded frame * Use elements_slightly_rounded_frame in text input * Gui test app: byte input usage * Byte input module: data drawing and selection * Byte input: comment currently unused fns * remove volatile qualifier * base byte input realisation * App gui test: remove internal fns visibility * Byne input, final version * test install gcc-arm-none-eabi-10-2020-q4-major * test install gcc-arm-none-eabi-10-2020-q4-major * App iButton: byte input view managment * App iButton: add key manually scenes * App iButton: rename scenes, add popup timeout * App iButton: use new scenes, new fn for rollback to specific prevous scene. * App iButton: remove byte input view on app exit * App iButton: edit key scene * Module byte input: reduce swintch value to uint8_t * Module byte input: switch from switch-case to if, unfortunately we need compile-time constants to use with switch * Icons: new small arrows * Module byte input: new arrangement of elements * OneWire slave lib: fix deattach sequence * App iButton: pulse sequencer * App iButton: add more keys to store * App iButton: split key worker to separate read/write/emulate entitys * App iButton: use new read/emulate entities * fix callback pointer saving * App iButton: use KeyReader error enum instead of KeyWorker error list handling * App iButton: do not use insomnia fns in pulse sequencer * App iButton: use KeyReader error enum in read scene * OneWire slave lib: more READ ROM command variants, call callback only if positive result * GPIO resources: add external gpio * App SD/NFC: removed application * App iButton-test: update to new light api * App iButton: update to new light-api * Outdated apps: add api-light-usage * Gpio: update SD card CS pin settings * API-power: added fns to disable/enable external 3v3 dc-dc * API-gpio: separated SD card detect routines * Resources: removed sd cs pin * SD card: low level init now resets card power supply * App SD-filesystem: use new card detect fns * SD card: fix low level init headers * SD card: more realilable low level init, power reset, exit from command read cycle conditionally * App SD-filesystem: led notifiers, init cycling * SD card: backport to F4 * Api PWM: add c++ guards * App iButton: yellow blink in emulate scene, vibro on * App iButton: one wire keys command set * App iButton: successful write scene * App iButton: key writer * App iButton: syntax fix * App iButton: notify write success * App iButton: fix double scene change * SD card: handle eject in init sequence * SD card: api to set level on detect gpio * SPI: api to set state on bus pins * SD card: set low state on bus pins while power reset * File select: init * File select: fix input consuming * SD Card: fixed dir open api error * SD-card: replace strncpy by strlcpy. Fix buffer overflow error. * API HAL OS: replace CMP based ticks with ARR based one, hard reset lptimer on reconfiguration. * GUI: More stack size for (temporary, wee need to implement sd card api in separate thread) * GUI: File select module. * App iButton-test: remove obsolete app Co-authored-by: rusdacent <rusdacentx0x08@gmail.com> Co-authored-by: coreglitch <mail@s3f.ru> Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2021-03-12 12:45:18 +00:00
#ifdef __cplusplus
}
#endif