flipperzero-firmware/firmware/targets/f6/furi-hal/furi-hal-i2c.c

#include <furi-hal-i2c.h>
#include <furi-hal-version.h>

#include <stm32wbxx_ll_i2c.h>
#include <stm32wbxx_ll_gpio.h>
#include <stm32wbxx_ll_cortex.h>
#include <furi.h>

osMutexId_t furi_hal_i2c_mutex = NULL;

void furi_hal_i2c_init() {
    furi_hal_i2c_mutex = osMutexNew(NULL);
    furi_check(furi_hal_i2c_mutex);

    LL_I2C_InitTypeDef I2C_InitStruct = {0};
    LL_GPIO_InitTypeDef GPIO_InitStruct = {0};

    LL_RCC_SetI2CClockSource(LL_RCC_I2C1_CLKSOURCE_PCLK1);

    GPIO_InitStruct.Pin = POWER_I2C_SCL_Pin | POWER_I2C_SDA_Pin;
    GPIO_InitStruct.Mode = LL_GPIO_MODE_ALTERNATE;
    GPIO_InitStruct.Speed = LL_GPIO_SPEED_FREQ_LOW;
    GPIO_InitStruct.OutputType = LL_GPIO_OUTPUT_OPENDRAIN;
    GPIO_InitStruct.Pull = LL_GPIO_PULL_NO;
    GPIO_InitStruct.Alternate = LL_GPIO_AF_4;
    LL_GPIO_Init(GPIOA, &GPIO_InitStruct);

    I2C_InitStruct.PeripheralMode = LL_I2C_MODE_I2C;
    I2C_InitStruct.AnalogFilter = LL_I2C_ANALOGFILTER_ENABLE;
    I2C_InitStruct.DigitalFilter = 0;
    I2C_InitStruct.OwnAddress1 = 0;
    I2C_InitStruct.TypeAcknowledge = LL_I2C_ACK;
    I2C_InitStruct.OwnAddrSize = LL_I2C_OWNADDRESS1_7BIT;
    if (furi_hal_version_get_hw_version() > 10) {
        I2C_InitStruct.Timing = POWER_I2C_TIMINGS_400;
    } else {
        I2C_InitStruct.Timing = POWER_I2C_TIMINGS_100;
    }
    LL_I2C_Init(POWER_I2C, &I2C_InitStruct);
    LL_I2C_EnableAutoEndMode(POWER_I2C);
    LL_I2C_SetOwnAddress2(POWER_I2C, 0, LL_I2C_OWNADDRESS2_NOMASK);
    LL_I2C_DisableOwnAddress2(POWER_I2C);
    LL_I2C_DisableGeneralCall(POWER_I2C);
    LL_I2C_EnableClockStretching(POWER_I2C);
    FURI_LOG_I("FuriHalI2C", "Init OK");
}

bool furi_hal_i2c_tx(
    I2C_TypeDef* instance,
    uint8_t address,
    const uint8_t* data,
    uint8_t size,
    uint32_t timeout) {
    uint32_t time_left = timeout;
    bool ret = true;

    while(LL_I2C_IsActiveFlag_BUSY(instance))
        ;

    LL_I2C_HandleTransfer(
        instance,
        address,
        LL_I2C_ADDRSLAVE_7BIT,
        size,
        LL_I2C_MODE_AUTOEND,
        LL_I2C_GENERATE_START_WRITE);

    while(!LL_I2C_IsActiveFlag_STOP(instance) || size > 0) {
        if(LL_I2C_IsActiveFlag_TXIS(instance)) {
            LL_I2C_TransmitData8(instance, (*data));
            data++;
            size--;
            time_left = timeout;
        }

        if(LL_SYSTICK_IsActiveCounterFlag()) {
            if(--time_left == 0) {
                ret = false;
                break;
            }
        }
    }

    LL_I2C_ClearFlag_STOP(instance);

    return ret;
}

bool furi_hal_i2c_rx(
    I2C_TypeDef* instance,
    uint8_t address,
    uint8_t* data,
    uint8_t size,
    uint32_t timeout) {
    uint32_t time_left = timeout;
    bool ret = true;

    while(LL_I2C_IsActiveFlag_BUSY(instance))
        ;

    LL_I2C_HandleTransfer(
        instance,
        address,
        LL_I2C_ADDRSLAVE_7BIT,
        size,
        LL_I2C_MODE_AUTOEND,
        LL_I2C_GENERATE_START_READ);

    while(!LL_I2C_IsActiveFlag_STOP(instance) || size > 0) {
        if(LL_I2C_IsActiveFlag_RXNE(instance)) {
            *data = LL_I2C_ReceiveData8(instance);
            data++;
            size--;
            time_left = timeout;
        }

        if(LL_SYSTICK_IsActiveCounterFlag()) {
            if(--time_left == 0) {
                ret = false;
                break;
            }
        }
    }

    LL_I2C_ClearFlag_STOP(instance);

    return ret;
}

bool furi_hal_i2c_trx(
    I2C_TypeDef* instance,
    uint8_t address,
    const uint8_t* tx_data,
    uint8_t tx_size,
    uint8_t* rx_data,
    uint8_t rx_size,
    uint32_t timeout) {
    if(furi_hal_i2c_tx(instance, address, tx_data, tx_size, timeout) &&
       furi_hal_i2c_rx(instance, address, rx_data, rx_size, timeout)) {
        return true;
    } else {
        return false;
    }
}

void furi_hal_i2c_lock() {
    furi_check(osMutexAcquire(furi_hal_i2c_mutex, osWaitForever) == osOK);
}

void furi_hal_i2c_unlock() {
    furi_check(osMutexRelease(furi_hal_i2c_mutex) == osOK);
}