flipperzero-firmware/firmware/targets/f6/ble-glue/gap.c

432 lines
15 KiB
C
Raw Normal View History

#include "gap.h"
#include "app_entry.h"
#include "ble.h"
#include "cmsis_os.h"
#include "otp.h"
#include "dev_info_service.h"
#include "battery_service.h"
#include "serial_service.h"
#include <applications/bt/bt_service/bt.h>
#include <furi-hal.h>
#define GAP_TAG "BLE"
#define FAST_ADV_TIMEOUT 30000
#define INITIAL_ADV_TIMEOUT 60000
#define BD_ADDR_SIZE_LOCAL 6
typedef struct {
uint16_t gap_svc_handle;
uint16_t dev_name_char_handle;
uint16_t appearance_char_handle;
uint16_t connection_handle;
uint8_t adv_svc_uuid_len;
uint8_t adv_svc_uuid[20];
} GapSvc;
typedef struct {
GapSvc gap_svc;
GapState state;
osMutexId_t state_mutex;
uint8_t mac_address[BD_ADDR_SIZE_LOCAL];
Bt* bt;
osTimerId advertise_timer;
osThreadAttr_t thread_attr;
osThreadId_t thread_id;
osMessageQueueId_t command_queue;
bool enable_adv;
} Gap;
typedef enum {
GapCommandAdvFast,
GapCommandAdvLowPower,
GapCommandAdvStop,
} GapCommand;
// Identity root key
static const uint8_t gap_irk[16] = {0x12,0x34,0x56,0x78,0x9a,0xbc,0xde,0xf0,0x12,0x34,0x56,0x78,0x9a,0xbc,0xde,0xf0};
// Encryption root key
static const uint8_t gap_erk[16] = {0xfe,0xdc,0xba,0x09,0x87,0x65,0x43,0x21,0xfe,0xdc,0xba,0x09,0x87,0x65,0x43,0x21};
// Appearence characteristic UUID
static const uint8_t gap_appearence_char_uuid[] = {0x00, 0x86};
// Default MAC address
static const uint8_t gap_default_mac_addr[] = {0x6c, 0x7a, 0xd8, 0xac, 0x57, 0x72};
static Gap* gap = NULL;
static void gap_advertise_start(GapState new_state);
static void gap_app(void *arg);
SVCCTL_UserEvtFlowStatus_t SVCCTL_App_Notification( void *pckt )
{
hci_event_pckt *event_pckt;
evt_le_meta_event *meta_evt;
evt_blue_aci *blue_evt;
hci_le_phy_update_complete_event_rp0 *evt_le_phy_update_complete;
uint8_t tx_phy;
uint8_t rx_phy;
tBleStatus ret = BLE_STATUS_INVALID_PARAMS;
event_pckt = (hci_event_pckt*) ((hci_uart_pckt *) pckt)->data;
osMutexAcquire(gap->state_mutex, osWaitForever);
switch (event_pckt->evt) {
case EVT_DISCONN_COMPLETE:
{
hci_disconnection_complete_event_rp0 *disconnection_complete_event = (hci_disconnection_complete_event_rp0 *) event_pckt->data;
if (disconnection_complete_event->Connection_Handle == gap->gap_svc.connection_handle) {
gap->gap_svc.connection_handle = 0;
gap->state = GapStateIdle;
FURI_LOG_I(GAP_TAG, "Disconnect from client");
}
if(gap->enable_adv) {
// Restart advertising
gap_start_advertising();
furi_hal_power_insomnia_exit();
}
}
break;
case EVT_LE_META_EVENT:
meta_evt = (evt_le_meta_event*) event_pckt->data;
switch (meta_evt->subevent) {
case EVT_LE_CONN_UPDATE_COMPLETE:
FURI_LOG_D(GAP_TAG, "Connection update event");
break;
case EVT_LE_PHY_UPDATE_COMPLETE:
evt_le_phy_update_complete = (hci_le_phy_update_complete_event_rp0*)meta_evt->data;
if(evt_le_phy_update_complete->Status) {
FURI_LOG_E(GAP_TAG, "Update PHY failed, status %d", evt_le_phy_update_complete->Status);
} else {
FURI_LOG_I(GAP_TAG, "Update PHY succeed");
}
ret = hci_le_read_phy(gap->gap_svc.connection_handle,&tx_phy,&rx_phy);
if(ret) {
FURI_LOG_E(GAP_TAG, "Read PHY failed, status: %d", ret);
} else {
FURI_LOG_I(GAP_TAG, "PHY Params TX = %d, RX = %d ", tx_phy, rx_phy);
}
break;
case EVT_LE_CONN_COMPLETE:
furi_hal_power_insomnia_enter();
hci_le_connection_complete_event_rp0* connection_complete_event = (hci_le_connection_complete_event_rp0 *) meta_evt->data;
FURI_LOG_I(GAP_TAG, "Connection complete for connection handle 0x%x", connection_complete_event->Connection_Handle);
// Stop advertising as connection completed
osTimerStop(gap->advertise_timer);
// Update connection status and handle
gap->state = GapStateConnected;
gap->gap_svc.connection_handle = connection_complete_event->Connection_Handle;
// Start pairing by sending security request
aci_gap_slave_security_req(connection_complete_event->Connection_Handle);
break;
default:
break;
}
break;
case EVT_VENDOR:
blue_evt = (evt_blue_aci*) event_pckt->data;
switch (blue_evt->ecode) {
aci_gap_pairing_complete_event_rp0 *pairing_complete;
case EVT_BLUE_GAP_LIMITED_DISCOVERABLE:
FURI_LOG_I(GAP_TAG, "Limited discoverable event");
break;
case EVT_BLUE_GAP_PASS_KEY_REQUEST:
{
// Generate random PIN code
uint32_t pin = rand() % 999999;
aci_gap_pass_key_resp(gap->gap_svc.connection_handle, pin);
FURI_LOG_I(GAP_TAG, "Pass key request event. Pin: %d", pin);
bt_pin_code_show(gap->bt, pin);
}
break;
case EVT_BLUE_GAP_AUTHORIZATION_REQUEST:
FURI_LOG_I(GAP_TAG, "Authorization request event");
break;
case EVT_BLUE_GAP_SLAVE_SECURITY_INITIATED:
FURI_LOG_I(GAP_TAG, "Slave security initiated");
break;
case EVT_BLUE_GAP_BOND_LOST:
FURI_LOG_I(GAP_TAG, "Bond lost event. Start rebonding");
aci_gap_allow_rebond(gap->gap_svc.connection_handle);
break;
case EVT_BLUE_GAP_DEVICE_FOUND:
FURI_LOG_I(GAP_TAG, "Device found event");
break;
case EVT_BLUE_GAP_ADDR_NOT_RESOLVED:
FURI_LOG_I(GAP_TAG, "Address not resolved event");
break;
case EVT_BLUE_GAP_KEYPRESS_NOTIFICATION:
FURI_LOG_I(GAP_TAG, "Key press notification event");
break;
case EVT_BLUE_GAP_NUMERIC_COMPARISON_VALUE:
FURI_LOG_I(GAP_TAG, "Hex_value = %lx",
((aci_gap_numeric_comparison_value_event_rp0 *)(blue_evt->data))->Numeric_Value);
aci_gap_numeric_comparison_value_confirm_yesno(gap->gap_svc.connection_handle, 1);
break;
case EVT_BLUE_GAP_PAIRING_CMPLT:
pairing_complete = (aci_gap_pairing_complete_event_rp0*)blue_evt->data;
if (pairing_complete->Status) {
FURI_LOG_E(GAP_TAG, "Pairing failed with status: %d. Terminating connection", pairing_complete->Status);
aci_gap_terminate(gap->gap_svc.connection_handle, 5);
} else {
FURI_LOG_I(GAP_TAG, "Pairing complete");
}
break;
case EVT_BLUE_GAP_PROCEDURE_COMPLETE:
FURI_LOG_I(GAP_TAG, "Procedure complete event");
break;
}
default:
break;
}
osMutexRelease(gap->state_mutex);
return SVCCTL_UserEvtFlowEnable;
}
void SVCCTL_SvcInit() {
// Dummy function to prevent unused services initialization
// TODO refactor (disable all services in WPAN config)
}
static void set_advertisment_service_uid(uint8_t* uid, uint8_t uid_len) {
gap->gap_svc.adv_svc_uuid_len = 1;
if(uid_len == 2) {
gap->gap_svc.adv_svc_uuid[0] = AD_TYPE_16_BIT_SERV_UUID;
} else if (uid_len == 4) {
gap->gap_svc.adv_svc_uuid[0] = AD_TYPE_32_BIT_SERV_UUID;
} else if(uid_len == 16) {
gap->gap_svc.adv_svc_uuid[0] = AD_TYPE_128_BIT_SERV_UUID_CMPLT_LIST;
}
memcpy(&gap->gap_svc.adv_svc_uuid[1], uid, uid_len);
gap->gap_svc.adv_svc_uuid_len += uid_len;
}
GapState gap_get_state() {
return gap->state;
}
void gap_init_mac_address(Gap* gap) {
uint8_t *otp_addr;
uint32_t udn;
uint32_t company_id;
uint32_t device_id;
udn = LL_FLASH_GetUDN();
if(udn != 0xFFFFFFFF) {
company_id = LL_FLASH_GetSTCompanyID();
device_id = LL_FLASH_GetDeviceID();
gap->mac_address[0] = (uint8_t)(udn & 0x000000FF);
gap->mac_address[1] = (uint8_t)( (udn & 0x0000FF00) >> 8 );
gap->mac_address[2] = (uint8_t)( (udn & 0x00FF0000) >> 16 );
gap->mac_address[3] = (uint8_t)device_id;
gap->mac_address[4] = (uint8_t)(company_id & 0x000000FF);;
gap->mac_address[5] = (uint8_t)( (company_id & 0x0000FF00) >> 8 );
} else {
otp_addr = OTP_Read(0);
if(otp_addr) {
memcpy(gap->mac_address, ((OTP_ID0_t*)otp_addr)->bd_address, sizeof(gap->mac_address));
} else {
memcpy(gap->mac_address, gap_default_mac_addr, sizeof(gap->mac_address));
}
}
}
static void gap_init_svc(Gap* gap) {
tBleStatus status;
uint32_t srd_bd_addr[2];
//HCI Reset to synchronise BLE Stack*/
hci_reset();
// Configure mac address
gap_init_mac_address(gap);
aci_hal_write_config_data(CONFIG_DATA_PUBADDR_OFFSET, CONFIG_DATA_PUBADDR_LEN, (uint8_t*)gap->mac_address);
/* Static random Address
* The two upper bits shall be set to 1
* The lowest 32bits is read from the UDN to differentiate between devices
* The RNG may be used to provide a random number on each power on
*/
srd_bd_addr[1] = 0x0000ED6E;
srd_bd_addr[0] = LL_FLASH_GetUDN();
aci_hal_write_config_data( CONFIG_DATA_RANDOM_ADDRESS_OFFSET, CONFIG_DATA_RANDOM_ADDRESS_LEN, (uint8_t*)srd_bd_addr );
// Set Identity root key used to derive LTK and CSRK
aci_hal_write_config_data( CONFIG_DATA_IR_OFFSET, CONFIG_DATA_IR_LEN, (uint8_t*)gap_irk );
// Set Encryption root key used to derive LTK and CSRK
aci_hal_write_config_data( CONFIG_DATA_ER_OFFSET, CONFIG_DATA_ER_LEN, (uint8_t*)gap_erk );
// Set TX Power to 0 dBm
aci_hal_set_tx_power_level(1, 0x19);
// Initialize GATT interface
aci_gatt_init();
// Initialize GAP interface
const char *name = furi_hal_version_get_device_name_ptr();
aci_gap_init(GAP_PERIPHERAL_ROLE, 0, strlen(name),
&gap->gap_svc.gap_svc_handle, &gap->gap_svc.dev_name_char_handle, &gap->gap_svc.appearance_char_handle);
// Set GAP characteristics
status = aci_gatt_update_char_value(gap->gap_svc.gap_svc_handle, gap->gap_svc.dev_name_char_handle, 0, strlen(name), (uint8_t *) name);
if (status) {
FURI_LOG_E(GAP_TAG, "Failed updating name characteristic: %d", status);
}
status = aci_gatt_update_char_value(gap->gap_svc.gap_svc_handle, gap->gap_svc.appearance_char_handle, 0, 2, gap_appearence_char_uuid);
if(status) {
FURI_LOG_E(GAP_TAG, "Failed updating appearence characteristic: %d", status);
}
// Set default PHY
hci_le_set_default_phy(ALL_PHYS_PREFERENCE, TX_2M_PREFERRED, RX_2M_PREFERRED);
// Set I/O capability
aci_gap_set_io_capability(IO_CAP_DISPLAY_ONLY);
// Setup authentication
aci_gap_set_authentication_requirement(1, 1, 1, 0, 8, 16, 1, 0, PUBLIC_ADDR);
// Configure whitelist
aci_gap_configure_whitelist();
}
static void gap_advertise_start(GapState new_state)
{
tBleStatus status;
uint16_t min_interval;
uint16_t max_interval;
if (new_state == GapStateAdvFast) {
min_interval = 0x80; // 80 ms
max_interval = 0xa0; // 100 ms
} else {
min_interval = 0x0640; // 1 s
max_interval = 0x0fa0; // 2.5 s
}
// Stop advertising timer
osTimerStop(gap->advertise_timer);
if ((new_state == GapStateAdvLowPower) && ((gap->state == GapStateAdvFast) || (gap->state == GapStateAdvLowPower))) {
// Stop advertising
status = aci_gap_set_non_discoverable();
if (status) {
FURI_LOG_E(GAP_TAG, "Stop Advertising Failed, result: %d", status);
}
}
// Configure advertising
const char* name = furi_hal_version_get_ble_local_device_name_ptr();
status = aci_gap_set_discoverable(ADV_IND, min_interval, max_interval, PUBLIC_ADDR, 0,
strlen(name), (uint8_t*)name,
gap->gap_svc.adv_svc_uuid_len, gap->gap_svc.adv_svc_uuid, 0, 0);
if(status) {
FURI_LOG_E(GAP_TAG, "Set discoverable err: %d", status);
}
gap->state = new_state;
bt_update_statusbar(gap->bt);
osTimerStart(gap->advertise_timer, INITIAL_ADV_TIMEOUT);
}
static void gap_advertise_stop() {
if(gap->state == GapStateConnected) {
// Terminate connection
aci_gap_terminate(gap->gap_svc.connection_handle, 0x13);
}
if(gap->state > GapStateIdle) {
// Stop advertising
osTimerStop(gap->advertise_timer);
aci_gap_set_non_discoverable();
gap->state = GapStateIdle;
bt_update_statusbar(gap->bt);
}
}
void gap_start_advertising() {
gap->enable_adv = true;
GapCommand command = GapCommandAdvFast;
furi_check(osMessageQueuePut(gap->command_queue, &command, 0, 0) == osOK);
}
void gap_stop_advertising() {
gap->enable_adv = false;
GapCommand command = GapCommandAdvStop;
furi_check(osMessageQueuePut(gap->command_queue, &command, 0, 0) == osOK);
}
static void gap_advetise_timer_callback(void* context) {
GapCommand command = GapCommandAdvLowPower;
furi_check(osMessageQueuePut(gap->command_queue, &command, 0, 0) == osOK);
}
bool gap_init() {
if (APPE_Status() != BleGlueStatusStarted) {
return false;
}
gap = furi_alloc(sizeof(Gap));
srand(DWT->CYCCNT);
// Open Bt record
gap->bt = furi_record_open("bt");
// Create advertising timer
gap->advertise_timer = osTimerNew(gap_advetise_timer_callback, osTimerOnce, NULL, NULL);
// Initialization of GATT & GAP layer
gap_init_svc(gap);
// Initialization of the BLE Services
SVCCTL_Init();
// Initialization of the GAP state
gap->state_mutex = osMutexNew(NULL);
gap->state = GapStateIdle;
gap->gap_svc.connection_handle = 0xFFFF;
gap->enable_adv = true;
// Thread configuration
gap->thread_attr.name = "BLE advertising";
gap->thread_attr.stack_size = 1024;
gap->thread_id = osThreadNew(gap_app, NULL, &gap->thread_attr);
// Command queue allocation
gap->command_queue = osMessageQueueNew(8, sizeof(GapCommand), NULL);
// Start Device Information service
dev_info_svc_start();
// Start Battery service
battery_svc_start();
// Start Serial application
serial_svc_start();
// Configure advirtise service UUID
uint8_t adv_service_uid[2];
adv_service_uid[0] = 0x80 | furi_hal_version_get_hw_color();
adv_service_uid[1] = 0x30;
set_advertisment_service_uid(adv_service_uid, sizeof(adv_service_uid));
return true;
}
static void gap_app(void *arg) {
GapCommand command;
while(1) {
furi_check(osMessageQueueGet(gap->command_queue, &command, NULL, osWaitForever) == osOK);
osMutexAcquire(gap->state_mutex, osWaitForever);
if(command == GapCommandAdvFast) {
gap_advertise_start(GapStateAdvFast);
} else if(command == GapCommandAdvLowPower) {
gap_advertise_start(GapStateAdvLowPower);
} else if(command == GapCommandAdvStop) {
gap_advertise_stop();
}
osMutexRelease(gap->state_mutex);
}
}