flipperzero-firmware/lib/irda/encoder_decoder/irda_protocol_defs_i.h

260 lines
14 KiB
C
Raw Normal View History

#pragma once
#include <stddef.h>
#include <stdbool.h>
#include <stdint.h>
#include "irda.h"
#include "common/irda_common_i.h"
/***************************************************************************************************
* NEC protocol description
* https://radioparty.ru/manuals/encyclopedia/213-ircontrol?start=1
****************************************************************************************************
* Preamble Preamble Pulse Distance/Width Pause Preamble Preamble Stop
* mark space Modulation up to period repeat repeat bit
* mark space
*
* 9000 4500 32 bit + stop bit ...110000 9000 2250
* __________ _ _ _ _ _ _ _ _ _ _ _ _ _ ___________ _
* ____ __________ _ _ _ __ __ __ _ _ __ __ _ _ ________________ ____________ ___
*
***************************************************************************************************/
#define IRDA_NEC_PREAMBLE_MARK 9000
#define IRDA_NEC_PREAMBLE_SPACE 4500
#define IRDA_NEC_BIT1_MARK 560
#define IRDA_NEC_BIT1_SPACE 1690
#define IRDA_NEC_BIT0_MARK 560
#define IRDA_NEC_BIT0_SPACE 560
#define IRDA_NEC_REPEAT_PERIOD 110000
#define IRDA_NEC_SILENCE IRDA_NEC_REPEAT_PERIOD
#define IRDA_NEC_MIN_SPLIT_TIME IRDA_NEC_REPEAT_PAUSE_MIN
#define IRDA_NEC_REPEAT_PAUSE_MIN 4000
#define IRDA_NEC_REPEAT_PAUSE_MAX 150000
#define IRDA_NEC_REPEAT_MARK 9000
#define IRDA_NEC_REPEAT_SPACE 2250
#define IRDA_NEC_PREAMBLE_TOLERANCE 200 // us
#define IRDA_NEC_BIT_TOLERANCE 120 // us
void* irda_decoder_nec_alloc(void);
void irda_decoder_nec_reset(void* decoder);
void irda_decoder_nec_free(void* decoder);
IrdaMessage* irda_decoder_nec_check_ready(void* decoder);
IrdaMessage* irda_decoder_nec_decode(void* decoder, bool level, uint32_t duration);
void* irda_encoder_nec_alloc(void);
IrdaStatus irda_encoder_nec_encode(void* encoder_ptr, uint32_t* duration, bool* level);
void irda_encoder_nec_reset(void* encoder_ptr, const IrdaMessage* message);
void irda_encoder_nec_free(void* encoder_ptr);
bool irda_decoder_nec_interpret(IrdaCommonDecoder* decoder);
IrdaStatus irda_decoder_nec_decode_repeat(IrdaCommonDecoder* decoder);
IrdaStatus irda_encoder_nec_encode_repeat(IrdaCommonEncoder* encoder, uint32_t* duration, bool* level);
const IrdaProtocolSpecification* irda_nec_get_spec(IrdaProtocol protocol);
extern const IrdaCommonProtocolSpec protocol_nec;
/***************************************************************************************************
* SAMSUNG32 protocol description
* https://www.mikrocontroller.net/articles/IRMP_-_english#SAMSUNG
****************************************************************************************************
* Preamble Preamble Pulse Distance/Width Pause Preamble Preamble Bit1 Stop
* mark space Modulation repeat repeat bit
* mark space
*
* 4500 4500 32 bit + stop bit 40000/100000 4500 4500
* __________ _ _ _ _ _ _ _ _ _ _ _ ___________ _ _
* _ __________ __ _ __ __ __ _ _ __ __ _ ________________ ____________ ____ ___
*
***************************************************************************************************/
#define IRDA_SAMSUNG_PREAMBLE_MARK 4500
#define IRDA_SAMSUNG_PREAMBLE_SPACE 4500
#define IRDA_SAMSUNG_BIT1_MARK 550
#define IRDA_SAMSUNG_BIT1_SPACE 1650
#define IRDA_SAMSUNG_BIT0_MARK 550
#define IRDA_SAMSUNG_BIT0_SPACE 550
#define IRDA_SAMSUNG_REPEAT_PAUSE_MIN 30000
#define IRDA_SAMSUNG_REPEAT_PAUSE1 46000
#define IRDA_SAMSUNG_REPEAT_PAUSE2 97000
/* Samsung silence have to be greater than REPEAT MAX
* otherwise there can be problems during unit tests parsing
* of some data. Real tolerances we don't know, but in real life
* silence time should be greater than max repeat time. This is
* because of similar preambule timings for repeat and first messages. */
#define IRDA_SAMSUNG_MIN_SPLIT_TIME 5000
#define IRDA_SAMSUNG_SILENCE 145000
#define IRDA_SAMSUNG_REPEAT_PAUSE_MAX 140000
#define IRDA_SAMSUNG_REPEAT_MARK 4500
#define IRDA_SAMSUNG_REPEAT_SPACE 4500
#define IRDA_SAMSUNG_PREAMBLE_TOLERANCE 200 // us
#define IRDA_SAMSUNG_BIT_TOLERANCE 120 // us
void* irda_decoder_samsung32_alloc(void);
void irda_decoder_samsung32_reset(void* decoder);
void irda_decoder_samsung32_free(void* decoder);
IrdaMessage* irda_decoder_samsung32_check_ready(void* ctx);
IrdaMessage* irda_decoder_samsung32_decode(void* decoder, bool level, uint32_t duration);
IrdaStatus irda_encoder_samsung32_encode(void* encoder_ptr, uint32_t* duration, bool* level);
void irda_encoder_samsung32_reset(void* encoder_ptr, const IrdaMessage* message);
void* irda_encoder_samsung32_alloc(void);
void irda_encoder_samsung32_free(void* encoder_ptr);
bool irda_decoder_samsung32_interpret(IrdaCommonDecoder* decoder);
IrdaStatus irda_decoder_samsung32_decode_repeat(IrdaCommonDecoder* decoder);
IrdaStatus irda_encoder_samsung32_encode_repeat(IrdaCommonEncoder* encoder, uint32_t* duration, bool* level);
const IrdaProtocolSpecification* irda_samsung32_get_spec(IrdaProtocol protocol);
extern const IrdaCommonProtocolSpec protocol_samsung32;
/***************************************************************************************************
* RC6 protocol description
* https://www.mikrocontroller.net/articles/IRMP_-_english#RC6_.2B_RC6A
****************************************************************************************************
* Preamble Manchester/biphase Silence
* mark/space Modulation
*
* 2666 889 444/888 - bit (x2 for toggle bit) 2666
*
* ________ __ __ __ __ ____ __ __ __ __ __ __ __ __
* _ _________ ____ __ __ ____ __ __ __ __ __ __ __ __ _______________
* | 1 | 0 | 0 | 0 | 0 | ... | ... | |
* s m2 m1 m0 T address (MSB) command (MSB)
*
* s - start bit (always 1)
* m0-2 - mode (000 for RC6)
* T - toggle bit, twice longer
* address - 8 bit
* command - 8 bit
***************************************************************************************************/
#define IRDA_RC6_CARRIER_FREQUENCY 36000
#define IRDA_RC6_DUTY_CYCLE 0.33
#define IRDA_RC6_PREAMBLE_MARK 2666
#define IRDA_RC6_PREAMBLE_SPACE 889
#define IRDA_RC6_BIT 444 // half of time-quant for 1 bit
#define IRDA_RC6_PREAMBLE_TOLERANCE 200 // us
#define IRDA_RC6_BIT_TOLERANCE 120 // us
/* protocol allows 2700 silence, but it is hard to send 1 message without repeat */
#define IRDA_RC6_SILENCE (2700 * 10)
#define IRDA_RC6_MIN_SPLIT_TIME 2700
void* irda_decoder_rc6_alloc(void);
void irda_decoder_rc6_reset(void* decoder);
void irda_decoder_rc6_free(void* decoder);
IrdaMessage* irda_decoder_rc6_check_ready(void* ctx);
IrdaMessage* irda_decoder_rc6_decode(void* decoder, bool level, uint32_t duration);
void* irda_encoder_rc6_alloc(void);
void irda_encoder_rc6_reset(void* encoder_ptr, const IrdaMessage* message);
void irda_encoder_rc6_free(void* decoder);
IrdaStatus irda_encoder_rc6_encode(void* encoder_ptr, uint32_t* duration, bool* polarity);
bool irda_decoder_rc6_interpret(IrdaCommonDecoder* decoder);
IrdaStatus irda_decoder_rc6_decode_manchester(IrdaCommonDecoder* decoder, bool level, uint32_t timing);
IrdaStatus irda_encoder_rc6_encode_manchester(IrdaCommonEncoder* encoder_ptr, uint32_t* duration, bool* polarity);
const IrdaProtocolSpecification* irda_rc6_get_spec(IrdaProtocol protocol);
extern const IrdaCommonProtocolSpec protocol_rc6;
/***************************************************************************************************
* RC5 protocol description
* https://www.mikrocontroller.net/articles/IRMP_-_english#RC5_.2B_RC5X
****************************************************************************************************
* Manchester/biphase
* Modulation
*
* 888/1776 - bit (x2 for toggle bit)
*
* __ ____ __ __ __ __ __ __ __ __
* __ __ ____ __ __ __ __ __ __ __ _
* | 1 | 1 | 0 | ... | ... |
* s si T address (MSB) command (MSB)
*
* Note: manchester starts from space timing, so it have to be handled properly
* s - start bit (always 1)
* si - RC5: start bit (always 1), RC5X - 7-th bit of address (in our case always 0)
* T - toggle bit, change it's value every button press
* address - 5 bit
* command - 6/7 bit
***************************************************************************************************/
#define IRDA_RC5_CARRIER_FREQUENCY 36000
#define IRDA_RC5_DUTY_CYCLE 0.33
#define IRDA_RC5_PREAMBLE_MARK 0
#define IRDA_RC5_PREAMBLE_SPACE 0
#define IRDA_RC5_BIT 888 // half of time-quant for 1 bit
#define IRDA_RC5_PREAMBLE_TOLERANCE 200 // us
#define IRDA_RC5_BIT_TOLERANCE 120 // us
/* protocol allows 2700 silence, but it is hard to send 1 message without repeat */
#define IRDA_RC5_SILENCE (2700 * 10)
#define IRDA_RC5_MIN_SPLIT_TIME 2700
void* irda_decoder_rc5_alloc(void);
void irda_decoder_rc5_reset(void* decoder);
void irda_decoder_rc5_free(void* decoder);
IrdaMessage* irda_decoder_rc5_check_ready(void* ctx);
IrdaMessage* irda_decoder_rc5_decode(void* decoder, bool level, uint32_t duration);
void* irda_encoder_rc5_alloc(void);
void irda_encoder_rc5_reset(void* encoder_ptr, const IrdaMessage* message);
void irda_encoder_rc5_free(void* decoder);
IrdaStatus irda_encoder_rc5_encode(void* encoder_ptr, uint32_t* duration, bool* polarity);
bool irda_decoder_rc5_interpret(IrdaCommonDecoder* decoder);
const IrdaProtocolSpecification* irda_rc5_get_spec(IrdaProtocol protocol);
extern const IrdaCommonProtocolSpec protocol_rc5;
/***************************************************************************************************
* Sony SIRC protocol description
* https://www.sbprojects.net/knowledge/ir/sirc.php
* http://picprojects.org.uk/
****************************************************************************************************
* Preamble Preamble Pulse Width Modulation Pause Entirely repeat
* mark space up to period message..
*
* 2400 600 12/15/20 bits (600,1200) ...45000 2400 600
* __________ _ _ _ _ _ _ _ _ _ _ _ _ _ __________ _ _
* ____ __________ _ _ _ __ __ __ _ _ __ __ _ _ ____________________ __________ _
* | command | address |
* SIRC | 7b LSB | 5b LSB |
* SIRC15 | 7b LSB | 8b LSB |
* SIRC20 | 7b LSB | 13b LSB |
*
* No way to determine either next message is repeat or not,
* so recognize only fact message received. Sony remotes always send at least 3 messages.
* Assume 8 last extended bits for SIRC20 are address bits.
***************************************************************************************************/
#define IRDA_SIRC_CARRIER_FREQUENCY 40000
#define IRDA_SIRC_DUTY_CYCLE 0.33
#define IRDA_SIRC_PREAMBLE_MARK 2400
#define IRDA_SIRC_PREAMBLE_SPACE 600
#define IRDA_SIRC_BIT1_MARK 1200
#define IRDA_SIRC_BIT1_SPACE 600
#define IRDA_SIRC_BIT0_MARK 600
#define IRDA_SIRC_BIT0_SPACE 600
#define IRDA_SIRC_PREAMBLE_TOLERANCE 200 // us
#define IRDA_SIRC_BIT_TOLERANCE 120 // us
#define IRDA_SIRC_SILENCE 10000
#define IRDA_SIRC_MIN_SPLIT_TIME (IRDA_SIRC_SILENCE - 1000)
#define IRDA_SIRC_REPEAT_PERIOD 45000
void* irda_decoder_sirc_alloc(void);
void irda_decoder_sirc_reset(void* decoder);
IrdaMessage* irda_decoder_sirc_check_ready(void* decoder);
uint32_t irda_decoder_sirc_get_timeout(void* decoder);
void irda_decoder_sirc_free(void* decoder);
IrdaMessage* irda_decoder_sirc_decode(void* decoder, bool level, uint32_t duration);
void* irda_encoder_sirc_alloc(void);
void irda_encoder_sirc_reset(void* encoder_ptr, const IrdaMessage* message);
void irda_encoder_sirc_free(void* decoder);
IrdaStatus irda_encoder_sirc_encode(void* encoder_ptr, uint32_t* duration, bool* polarity);
bool irda_decoder_sirc_interpret(IrdaCommonDecoder* decoder);
const IrdaProtocolSpecification* irda_sirc_get_spec(IrdaProtocol protocol);
IrdaStatus irda_encoder_sirc_encode_repeat(IrdaCommonEncoder* encoder, uint32_t* duration, bool* level);
extern const IrdaCommonProtocolSpec protocol_sirc;