flipperzero-firmware/bootloader/targets/f6/target.c

179 lines
5.5 KiB
C
Raw Normal View History

#include <target.h>
#include <stm32wbxx.h>
#include <stm32wbxx_ll_system.h>
#include <stm32wbxx_ll_bus.h>
#include <stm32wbxx_ll_utils.h>
#include <stm32wbxx_ll_rcc.h>
#include <stm32wbxx_ll_rtc.h>
#include <stm32wbxx_ll_pwr.h>
#include <stm32wbxx_ll_gpio.h>
#include <stm32wbxx_hal_flash.h>
#include <lib/toolbox/version.h>
#include <api-hal.h>
// Boot request enum
#define BOOT_REQUEST_TAINTED 0x00000000
#define BOOT_REQUEST_CLEAN 0xDADEDADE
#define BOOT_REQUEST_DFU 0xDF00B000
// Boot to DFU pin
#define BOOT_DFU_PORT GPIOB
#define BOOT_DFU_PIN LL_GPIO_PIN_11
// USB pins
#define BOOT_USB_PORT GPIOA
#define BOOT_USB_DM_PIN LL_GPIO_PIN_11
#define BOOT_USB_DP_PIN LL_GPIO_PIN_12
#define BOOT_USB_PIN (BOOT_USB_DM_PIN | BOOT_USB_DP_PIN)
#define RTC_CLOCK_IS_READY() (LL_RCC_LSE_IsReady() && LL_RCC_LSI1_IsReady())
void target_led_control(char* c) {
api_hal_light_set(LightRed, 0x00);
api_hal_light_set(LightGreen, 0x00);
api_hal_light_set(LightBlue, 0x00);
do {
if(*c == 'R') {
api_hal_light_set(LightRed, 0xFF);
} else if(*c == 'G') {
api_hal_light_set(LightGreen, 0xFF);
} else if(*c == 'B') {
api_hal_light_set(LightBlue, 0xFF);
} else if(*c == '.') {
LL_mDelay(125);
api_hal_light_set(LightRed, 0x00);
api_hal_light_set(LightGreen, 0x00);
api_hal_light_set(LightBlue, 0x00);
LL_mDelay(125);
} else if(*c == '-') {
LL_mDelay(250);
api_hal_light_set(LightRed, 0x00);
api_hal_light_set(LightGreen, 0x00);
api_hal_light_set(LightBlue, 0x00);
LL_mDelay(250);
} else if(*c == '|') {
api_hal_light_set(LightRed, 0x00);
api_hal_light_set(LightGreen, 0x00);
api_hal_light_set(LightBlue, 0x00);
}
c++;
} while(*c != 0);
}
void clock_init() {
LL_Init1msTick(4000000);
LL_SetSystemCoreClock(4000000);
}
void gpio_init() {
LL_AHB2_GRP1_EnableClock(LL_AHB2_GRP1_PERIPH_GPIOA);
LL_AHB2_GRP1_EnableClock(LL_AHB2_GRP1_PERIPH_GPIOB);
LL_AHB2_GRP1_EnableClock(LL_AHB2_GRP1_PERIPH_GPIOC);
// USB D+
LL_GPIO_SetPinMode(BOOT_USB_PORT, BOOT_USB_DP_PIN, LL_GPIO_MODE_OUTPUT);
LL_GPIO_SetPinSpeed(BOOT_USB_PORT, BOOT_USB_DP_PIN, LL_GPIO_SPEED_FREQ_VERY_HIGH);
LL_GPIO_SetPinOutputType(BOOT_USB_PORT, BOOT_USB_DP_PIN, LL_GPIO_OUTPUT_OPENDRAIN);
// USB D-
LL_GPIO_SetPinMode(BOOT_USB_PORT, BOOT_USB_DM_PIN, LL_GPIO_MODE_OUTPUT);
LL_GPIO_SetPinSpeed(BOOT_USB_PORT, BOOT_USB_DM_PIN, LL_GPIO_SPEED_FREQ_VERY_HIGH);
LL_GPIO_SetPinOutputType(BOOT_USB_PORT, BOOT_USB_DM_PIN, LL_GPIO_OUTPUT_OPENDRAIN);
// Button: back
LL_GPIO_SetPinMode(BOOT_DFU_PORT, BOOT_DFU_PIN, LL_GPIO_MODE_INPUT);
LL_GPIO_SetPinPull(BOOT_DFU_PORT, BOOT_DFU_PIN, LL_GPIO_PULL_UP);
}
void rtc_init() {
// LSE and RTC
LL_PWR_EnableBkUpAccess();
if(!RTC_CLOCK_IS_READY()) {
// Start LSI1 needed for CSS
LL_RCC_LSI1_Enable();
// Try to start LSE normal way
LL_RCC_LSE_SetDriveCapability(LL_RCC_LSEDRIVE_HIGH);
LL_RCC_LSE_Enable();
uint32_t c = 0;
while(!RTC_CLOCK_IS_READY() && c < 200) {
LL_mDelay(10);
c++;
}
// Plan B: reset backup domain
if(!RTC_CLOCK_IS_READY()) {
target_led_control("-R.R.R.");
LL_RCC_ForceBackupDomainReset();
LL_RCC_ReleaseBackupDomainReset();
NVIC_SystemReset();
}
// Set RTC domain clock to LSE
LL_RCC_SetRTCClockSource(LL_RCC_RTC_CLKSOURCE_LSE);
// Enable LSE CSS
LL_RCC_LSE_EnableCSS();
}
// Enable clocking
LL_RCC_EnableRTC();
LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_RTCAPB);
}
void version_save(void) {
LL_RTC_BAK_SetRegister(RTC, LL_RTC_BKP_DR1, (uint32_t)version_get());
}
void usb_wire_reset() {
LL_GPIO_ResetOutputPin(BOOT_USB_PORT, BOOT_USB_PIN);
LL_mDelay(10);
LL_GPIO_SetOutputPin(BOOT_USB_PORT, BOOT_USB_PIN);
}
void target_init() {
clock_init();
gpio_init();
api_hal_init();
target_led_control("RGB");
rtc_init();
version_save();
usb_wire_reset();
// Errata 2.2.9, Flash OPTVERR flag is always set after system reset
__HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_ALL_ERRORS);
}
int target_is_dfu_requested() {
if(LL_RTC_BAK_GetRegister(RTC, LL_RTC_BKP_DR0) == BOOT_REQUEST_TAINTED) {
// Default system state is tainted
// We must ensure that MCU is cleanly booted
LL_RTC_BAK_SetRegister(RTC, LL_RTC_BKP_DR0, BOOT_REQUEST_CLEAN);
NVIC_SystemReset();
} else if(LL_RTC_BAK_GetRegister(RTC, LL_RTC_BKP_DR0) == BOOT_REQUEST_DFU) {
return 1;
}
LL_mDelay(100);
if(!LL_GPIO_IsInputPinSet(BOOT_DFU_PORT, BOOT_DFU_PIN)) {
return 1;
}
return 0;
}
void target_switch(void* offset) {
asm volatile("ldr r3, [%0] \n"
"msr msp, r3 \n"
"ldr r3, [%1] \n"
"mov pc, r3 \n"
:
: "r"(offset), "r"(offset + 0x4)
: "r3");
}
void target_switch2dfu() {
target_led_control("B");
// Mark system as tainted, it will be soon
LL_RTC_BAK_SetRegister(RTC, LL_RTC_BKP_DR0, BOOT_REQUEST_TAINTED);
// Remap memory to system bootloader
LL_SYSCFG_SetRemapMemory(LL_SYSCFG_REMAP_SYSTEMFLASH);
target_switch(0x0);
}
void target_switch2os() {
target_led_control("G");
SCB->VTOR = OS_OFFSET;
target_switch((void*)(BOOT_ADDRESS + OS_OFFSET));
}