flipperzero-firmware/firmware/targets/furi-hal-include/furi-hal-irda.h

141 lines
4.7 KiB
C
Raw Normal View History

/**
* @file furi-hal-irda.h
* IRDA HAL API
*/
#pragma once
#include <stdint.h>
#include <stdbool.h>
2021-08-05 21:11:35 +00:00
#include <stddef.h>
#ifdef __cplusplus
extern "C" {
#endif
#define IRDA_MAX_FREQUENCY 56000
#define IRDA_MIN_FREQUENCY 10000
2021-08-05 21:11:35 +00:00
typedef enum {
FuriHalIrdaTxGetDataStateOk, /**< New data obtained */
FuriHalIrdaTxGetDataStateDone, /**< New data obtained, and this is end of package */
FuriHalIrdaTxGetDataStateLastDone, /**< New data obtained, and this is end of package and no more data available */
2021-08-08 18:03:25 +00:00
} FuriHalIrdaTxGetDataState;
2021-08-05 21:11:35 +00:00
/** Callback type for providing data to IRDA DMA TX system. It is called every tim */
typedef FuriHalIrdaTxGetDataState (*FuriHalIrdaTxGetDataISRCallback) (void* context, uint32_t* duration, bool* level);
/** Callback type called every time signal is sent by DMA to Timer.
*
* Actually, it means there are 2 timings left to send for this signal, which is
* almost end. Don't use this callback to stop transmission, as far as there are
* next signal is charged for transmission by DMA.
*/
typedef void (*FuriHalIrdaTxSignalSentISRCallback) (void* context);
2021-08-05 21:11:35 +00:00
/** Signature of callback function for receiving continuous IRDA rx signal.
*
* @param ctx[in] context to pass to callback
* @param level[in] level of input IRDA rx signal
* @param duration[in] duration of continuous rx signal level in us
*/
2021-08-08 18:03:25 +00:00
typedef void (*FuriHalIrdaRxCaptureCallback)(void* ctx, bool level, uint32_t duration);
/** Signature of callback function for reaching silence timeout on IRDA port.
*
* @param ctx[in] context to pass to callback
*/
2021-08-08 18:03:25 +00:00
typedef void (*FuriHalIrdaRxTimeoutCallback)(void* ctx);
/** Initialize IRDA RX timer to receive interrupts.
*
* It provides interrupts for every RX-signal edge changing with its duration.
*/
2021-08-08 18:03:25 +00:00
void furi_hal_irda_async_rx_start(void);
/** Deinitialize IRDA RX interrupt.
*/
2021-08-08 18:03:25 +00:00
void furi_hal_irda_async_rx_stop(void);
/** Setup hal for receiving silence timeout.
*
2021-08-08 18:03:25 +00:00
* Should be used with 'furi_hal_irda_timeout_irq_set_callback()'.
*
* @param[in] timeout_us time to wait for silence on IRDA port before
* generating IRQ.
*/
void furi_hal_irda_async_rx_set_timeout(uint32_t timeout_us);
/** Setup callback for previously initialized IRDA RX interrupt.
*
* @param[in] callback callback to call when RX signal edge changing occurs
* @param[in] ctx context for callback
*/
2021-08-08 18:03:25 +00:00
void furi_hal_irda_async_rx_set_capture_isr_callback(FuriHalIrdaRxCaptureCallback callback, void *ctx);
/** Setup callback for reaching silence timeout on IRDA port.
*
* Should setup hal with 'furi_hal_irda_setup_rx_timeout_irq()' first.
*
* @param[in] callback callback for silence timeout
* @param[in] ctx context to pass to callback
*/
2021-08-08 18:03:25 +00:00
void furi_hal_irda_async_rx_set_timeout_isr_callback(FuriHalIrdaRxTimeoutCallback callback, void *ctx);
2021-08-05 21:11:35 +00:00
/** Check if IRDA is in use now.
*
* @return true if IRDA is busy, false otherwise.
2021-08-05 21:11:35 +00:00
*/
2021-08-08 18:03:25 +00:00
bool furi_hal_irda_is_busy(void);
/** Set callback providing new data.
*
* This function has to be called before furi_hal_irda_async_tx_start().
*
* @param[in] callback function to provide new data
* @param[in] context context for callback
*/
void furi_hal_irda_async_tx_set_data_isr_callback(FuriHalIrdaTxGetDataISRCallback callback, void* context);
/** Start IR asynchronous transmission.
*
* It can be stopped by 2 reasons:
* 1. implicit call for furi_hal_irda_async_tx_stop()
* 2. callback can provide FuriHalIrdaTxGetDataStateLastDone response which
* means no more data available for transmission.
2021-08-05 21:11:35 +00:00
*
2021-08-08 18:03:25 +00:00
* Any func (furi_hal_irda_async_tx_stop() or
* furi_hal_irda_async_tx_wait_termination()) has to be called to wait end of
* transmission and free resources.
2021-08-05 21:11:35 +00:00
*
* @param[in] freq frequency for PWM
* @param[in] duty_cycle duty cycle for PWM
*/
void furi_hal_irda_async_tx_start(uint32_t freq, float duty_cycle);
/** Stop IR asynchronous transmission and free resources.
*
* Transmission will stop as soon as transmission reaches end of package
* (FuriHalIrdaTxGetDataStateDone or FuriHalIrdaTxGetDataStateLastDone).
2021-08-05 21:11:35 +00:00
*/
2021-08-08 18:03:25 +00:00
void furi_hal_irda_async_tx_stop(void);
2021-08-05 21:11:35 +00:00
/** Wait for end of IR asynchronous transmission and free resources.
*
* Transmission will stop as soon as transmission reaches end of transmission
* (FuriHalIrdaTxGetDataStateLastDone).
*/
2021-08-08 18:03:25 +00:00
void furi_hal_irda_async_tx_wait_termination(void);
/** Set callback for end of signal transmission
*
* @param[in] callback function to call when signal is sent
* @param[in] context context for callback
*/
void furi_hal_irda_async_tx_set_signal_sent_isr_callback(FuriHalIrdaTxSignalSentISRCallback callback, void* context);
#ifdef __cplusplus
}
#endif