flipperzero-firmware/firmware/targets/furi-hal-include/furi-hal-bt.h

/**
 * @file furi-hal-bt.h
 * BT/BLE HAL API
 */

#pragma once

#include <m-string.h>
#include <stdbool.h>
#include <gap.h>
#include <serial_service.h>
#include <ble_glue.h>
#include <ble_app.h>


#define FURI_HAL_BT_PACKET_SIZE_MAX SERIAL_SVC_DATA_LEN_MAX

#ifdef __cplusplus
extern "C" {
#endif

/** Initialize
 */
void furi_hal_bt_init();

/** Lock core2 state transition */
void furi_hal_bt_lock_core2();

/** Lock core2 state transition */
void furi_hal_bt_unlock_core2();

/** Start 2nd core and BLE stack
 *
 * @return true on success
 */
bool furi_hal_bt_start_core2();

/** Start BLE app
 * @param event_cb - BleEventCallback instance
 * @param context - pointer to context
*/
bool furi_hal_bt_init_app(BleEventCallback event_cb, void* context);

/** Start advertising
 */
void furi_hal_bt_start_advertising();

/** Stop advertising
 */
void furi_hal_bt_stop_advertising();

/** Returns true if BLE is advertising
 *
 * @return     true if BLE advertising
 */
bool furi_hal_bt_is_active();

/** Get BT/BLE system component state
 *
 * @param[in]  buffer  string_t buffer to write to
 */
void furi_hal_bt_dump_state(string_t buffer);

/** Get BT/BLE system component state
 *
 * @return     true if core2 is alive
 */
bool furi_hal_bt_is_alive();

/** Get key storage buffer address and size
 *
 * @param      key_buff_addr  pointer to store buffer address
 * @param      key_buff_size  pointer to store buffer size
 */
void furi_hal_bt_get_key_storage_buff(uint8_t** key_buff_addr, uint16_t* key_buff_size);

/** Get SRAM2 hardware semaphore
 * @note Must be called before SRAM2 read/write operations
 */
void furi_hal_bt_nvm_sram_sem_acquire();

/** Release SRAM2 hardware semaphore
 * @note Must be called after SRAM2 read/write operations
 */
void furi_hal_bt_nvm_sram_sem_release();

/** Set key storage change callback
 *
 * @param       callback    BleGlueKeyStorageChangedCallback instance
 * @param       context     pointer to context
 */
void furi_hal_bt_set_key_storage_change_callback(BleGlueKeyStorageChangedCallback callback, void* context);

/** Set data event callbacks
 * @param on_received_cb - SerialSvcDataReceivedCallback instance
 * @param on_sent_cb - SerialSvcDataSentCallback instance
 * @param context - pointer to context
 */
void furi_hal_bt_set_data_event_callbacks(uint16_t buff_size, SerialSvcDataReceivedCallback on_received_cb, SerialSvcDataSentCallback on_sent_cb, void* context);

/** Notify that buffer is empty */
void furi_hal_bt_notify_buffer_is_empty();

/** Send data through BLE
 * @param data - data buffer
 * @param size - data buffer size
 */
bool furi_hal_bt_tx(uint8_t* data, uint16_t size);

/** Start ble tone tx at given channel and power
 *
 * @param[in]  channel  The channel
 * @param[in]  power    The power
 */
void furi_hal_bt_start_tone_tx(uint8_t channel, uint8_t power);

/** Stop ble tone tx
 */
void furi_hal_bt_stop_tone_tx();

/** Start sending ble packets at a given frequency and datarate
 *
 * @param[in]  channel   The channel
 * @param[in]  pattern   The pattern
 * @param[in]  datarate  The datarate
 */
void furi_hal_bt_start_packet_tx(uint8_t channel, uint8_t pattern, uint8_t datarate);

/** Stop sending ble packets
 *
 * @return     sent packet count
 */
uint16_t furi_hal_bt_stop_packet_test();

/** Start receiving packets
 *
 * @param[in]  channel   RX channel
 * @param[in]  datarate  Datarate
 */
void furi_hal_bt_start_packet_rx(uint8_t channel, uint8_t datarate);

/** Set up the RF to listen to a given RF channel
 *
 * @param[in]  channel  RX channel
 */
void furi_hal_bt_start_rx(uint8_t channel);

/** Stop RF listenning
 */
void furi_hal_bt_stop_rx();

/** Get RSSI
 *
 * @return     RSSI in dBm
 */
float furi_hal_bt_get_rssi();

/** Get number of transmitted packets
 *
 * @return     packet count
 */
uint32_t furi_hal_bt_get_transmitted_packets();

#ifdef __cplusplus
}
#endif