flipperzero-firmware/firmware/targets/f7/furi_hal/furi_hal_clock.c

#include <furi_hal_clock.h>
#include <furi.h>

#include <stm32wbxx_ll_pwr.h>
#include <stm32wbxx_ll_rcc.h>
#include <stm32wbxx_ll_utils.h>
#include <stm32wbxx_ll_cortex.h>
#include <stm32wbxx_ll_bus.h>

#define TAG "FuriHalClock"

#define TICK_INT_PRIORITY 0U
#define HS_CLOCK_IS_READY() (LL_RCC_HSE_IsReady() && LL_RCC_HSI_IsReady())
#define LS_CLOCK_IS_READY() (LL_RCC_LSE_IsReady() && LL_RCC_LSI1_IsReady())

void furi_hal_clock_init() {
    /* Prepare Flash memory for 64mHz system clock */
    LL_FLASH_SetLatency(LL_FLASH_LATENCY_3);
    while(LL_FLASH_GetLatency() != LL_FLASH_LATENCY_3)
        ;

    /* HSE and HSI configuration and activation */
    LL_RCC_HSE_SetCapacitorTuning(0x26);
    LL_RCC_HSE_Enable();
    LL_RCC_HSI_Enable();
    while(!HS_CLOCK_IS_READY())
        ;
    LL_RCC_HSE_EnableCSS();

    /* LSE and LSI1 configuration and activation */
    LL_PWR_EnableBkUpAccess();
    LL_RCC_LSE_SetDriveCapability(LL_RCC_LSEDRIVE_HIGH);
    LL_RCC_LSE_Enable();
    LL_RCC_LSI1_Enable();
    while(!LS_CLOCK_IS_READY())
        ;
    LL_EXTI_EnableIT_0_31(
        LL_EXTI_LINE_18); /* Why? Because that's why. See RM0434, Table 61. CPU1 vector table. */
    LL_EXTI_EnableRisingTrig_0_31(LL_EXTI_LINE_18);
    LL_RCC_EnableIT_LSECSS();
    LL_RCC_LSE_EnableCSS();

    /* Main PLL configuration and activation */
    LL_RCC_PLL_ConfigDomain_SYS(LL_RCC_PLLSOURCE_HSE, LL_RCC_PLLM_DIV_2, 8, LL_RCC_PLLR_DIV_2);
    LL_RCC_PLL_Enable();
    LL_RCC_PLL_EnableDomain_SYS();
    while(LL_RCC_PLL_IsReady() != 1)
        ;

    LL_RCC_PLLSAI1_ConfigDomain_48M(
        LL_RCC_PLLSOURCE_HSE, LL_RCC_PLLM_DIV_2, 6, LL_RCC_PLLSAI1Q_DIV_2);
    LL_RCC_PLLSAI1_ConfigDomain_ADC(
        LL_RCC_PLLSOURCE_HSE, LL_RCC_PLLM_DIV_2, 6, LL_RCC_PLLSAI1R_DIV_2);
    LL_RCC_PLLSAI1_Enable();
    LL_RCC_PLLSAI1_EnableDomain_48M();
    LL_RCC_PLLSAI1_EnableDomain_ADC();
    while(LL_RCC_PLLSAI1_IsReady() != 1)
        ;

    /* Sysclk activation on the main PLL */
    /* Set CPU1 prescaler*/
    LL_RCC_SetAHBPrescaler(LL_RCC_SYSCLK_DIV_1);

    /* Set CPU2 prescaler*/
    LL_C2_RCC_SetAHBPrescaler(LL_RCC_SYSCLK_DIV_2);

    LL_RCC_SetSysClkSource(LL_RCC_SYS_CLKSOURCE_PLL);
    while(LL_RCC_GetSysClkSource() != LL_RCC_SYS_CLKSOURCE_STATUS_PLL)
        ;

    /* Set AHB SHARED prescaler*/
    LL_RCC_SetAHB4Prescaler(LL_RCC_SYSCLK_DIV_1);

    /* Set APB1 prescaler*/
    LL_RCC_SetAPB1Prescaler(LL_RCC_APB1_DIV_1);

    /* Set APB2 prescaler*/
    LL_RCC_SetAPB2Prescaler(LL_RCC_APB2_DIV_1);

    /* Disable MSI */
    LL_RCC_MSI_Disable();
    while(LL_RCC_MSI_IsReady() != 0)
        ;

    /* Update CMSIS variable (which can be updated also through SystemCoreClockUpdate function) */
    LL_SetSystemCoreClock(64000000);

    /* Update the time base */
    LL_InitTick(64000000, 1000);
    LL_SYSTICK_EnableIT();
    NVIC_SetPriority(SysTick_IRQn, TICK_INT_PRIORITY);
    NVIC_EnableIRQ(SysTick_IRQn);

    LL_RCC_SetUSARTClockSource(LL_RCC_USART1_CLKSOURCE_PCLK2);
    LL_RCC_SetLPUARTClockSource(LL_RCC_LPUART1_CLKSOURCE_PCLK1);
    LL_RCC_SetADCClockSource(LL_RCC_ADC_CLKSOURCE_PLLSAI1);
    LL_RCC_SetI2CClockSource(LL_RCC_I2C1_CLKSOURCE_PCLK1);
    LL_RCC_SetRNGClockSource(LL_RCC_RNG_CLKSOURCE_CLK48);
    LL_RCC_SetUSBClockSource(LL_RCC_USB_CLKSOURCE_PLLSAI1);
    LL_RCC_SetCLK48ClockSource(LL_RCC_CLK48_CLKSOURCE_PLLSAI1);
    LL_RCC_SetSMPSClockSource(LL_RCC_SMPS_CLKSOURCE_HSE);
    LL_RCC_SetSMPSPrescaler(LL_RCC_SMPS_DIV_1);
    LL_RCC_SetRFWKPClockSource(LL_RCC_RFWKP_CLKSOURCE_LSE);

    // AHB1 GRP1
    LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_DMA1);
    LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_DMA2);
    LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_DMAMUX1);
    LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_CRC);
    // LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_TSC);

    // AHB2 GRP1
    LL_AHB2_GRP1_EnableClock(LL_AHB2_GRP1_PERIPH_GPIOA);
    LL_AHB2_GRP1_EnableClock(LL_AHB2_GRP1_PERIPH_GPIOB);
    LL_AHB2_GRP1_EnableClock(LL_AHB2_GRP1_PERIPH_GPIOC);
    LL_AHB2_GRP1_EnableClock(LL_AHB2_GRP1_PERIPH_GPIOD);
    LL_AHB2_GRP1_EnableClock(LL_AHB2_GRP1_PERIPH_GPIOE);
    LL_AHB2_GRP1_EnableClock(LL_AHB2_GRP1_PERIPH_GPIOH);
    LL_AHB2_GRP1_EnableClock(LL_AHB2_GRP1_PERIPH_ADC);
    LL_AHB2_GRP1_EnableClock(LL_AHB2_GRP1_PERIPH_AES1);

    // AHB3 GRP1
    // LL_AHB3_GRP1_EnableClock(LL_AHB3_GRP1_PERIPH_QUADSPI);
    LL_AHB3_GRP1_EnableClock(LL_AHB3_GRP1_PERIPH_PKA);
    LL_AHB3_GRP1_EnableClock(LL_AHB3_GRP1_PERIPH_AES2);
    LL_AHB3_GRP1_EnableClock(LL_AHB3_GRP1_PERIPH_RNG);
    LL_AHB3_GRP1_EnableClock(LL_AHB3_GRP1_PERIPH_HSEM);
    LL_AHB3_GRP1_EnableClock(LL_AHB3_GRP1_PERIPH_IPCC);
    LL_AHB3_GRP1_EnableClock(LL_AHB3_GRP1_PERIPH_FLASH);

    // APB1 GRP1
    LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_TIM2);
    // LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_LCD);
    LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_RTCAPB);
    // LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_WWDG);
    LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_SPI2);
    LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_I2C1);
    LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_I2C3);
    LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_CRS);
    LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_USB);
    LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_LPTIM1);

    // APB1 GRP2
    LL_APB1_GRP2_EnableClock(LL_APB1_GRP2_PERIPH_LPUART1);
    LL_APB1_GRP2_EnableClock(LL_APB1_GRP2_PERIPH_LPTIM2);

    // APB2
    // LL_APB2_GRP1_EnableClock(LL_APB2_GRP1_PERIPH_ADC);
    LL_APB2_GRP1_EnableClock(LL_APB2_GRP1_PERIPH_TIM1);
    LL_APB2_GRP1_EnableClock(LL_APB2_GRP1_PERIPH_SPI1);
    LL_APB2_GRP1_EnableClock(LL_APB2_GRP1_PERIPH_USART1);
    LL_APB2_GRP1_EnableClock(LL_APB2_GRP1_PERIPH_TIM16);
    LL_APB2_GRP1_EnableClock(LL_APB2_GRP1_PERIPH_TIM17);
    // LL_APB2_GRP1_EnableClock(LL_APB2_GRP1_PERIPH_SAI1);

    FURI_LOG_I(TAG, "Init OK");
}

void furi_hal_clock_switch_to_hsi() {
    LL_RCC_HSI_Enable();

    while(!LL_RCC_HSI_IsReady())
        ;

    LL_RCC_SetSysClkSource(LL_RCC_SYS_CLKSOURCE_HSI);
    LL_RCC_SetSMPSClockSource(LL_RCC_SMPS_CLKSOURCE_HSI);

    while(LL_RCC_GetSysClkSource() != LL_RCC_SYS_CLKSOURCE_STATUS_HSI)
        ;
}

void furi_hal_clock_switch_to_pll() {
    LL_RCC_HSE_Enable();
    LL_RCC_PLL_Enable();

    while(!LL_RCC_HSE_IsReady())
        ;
    while(!LL_RCC_PLL_IsReady())
        ;

    LL_RCC_SetSysClkSource(LL_RCC_SYS_CLKSOURCE_PLL);
    LL_RCC_SetSMPSClockSource(LL_RCC_SMPS_CLKSOURCE_HSE);

    while(LL_RCC_GetSysClkSource() != LL_RCC_SYS_CLKSOURCE_STATUS_PLL)
        ;
}