flipperzero-firmware/firmware/targets/f7/ble-glue/battery_service.h

#pragma once

#include <stdint.h>
#include <stdbool.h>

#ifdef __cplusplus
extern "C" {
#endif

void battery_svc_start();

void battery_svc_stop();

bool battery_svc_update_level(uint8_t battery_level);

#ifdef __cplusplus
}
#endif
[FL-1587] RFID: Clock for emulation timer from antenna (#622) * RFID: pull antenna down when emulating * Rfid: fixed HID emulation by adding zero pulse every 4 bits * Rfid: HID emulation fixed with DSP based FSK oscillator. * Rfid: receive 125KHz clock for emulation timer from antenna and comparator * Rfid: commented unused variable * Firmware: rollback changes in f6. * Add F7 target based on F6. * F7/F6: update cube projects, apply changes to the targets, update linker scripts with correct RAM start values. * FuriHal: RFID init routine. * Scripts: update OTP tool for v11 board Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com> 2021-09-10 02:19:02 +00:00			`#pragma once`

			`#include <stdint.h>`
			`#include <stdbool.h>`

			`#ifdef __cplusplus`
			`extern "C" {`
			`#endif`

[FL-1795] BLE GAP refactoring (#694) * ble: remove heart rate profile * ble-glue: delete dead code * ble-glue: dis refactoring * ble-glue: add battery service * broken ble_common refactoring * ble-glue: advertise 128 bit service uid * ble-glue: remove dead code * ble: advertise service 16 bit uid depending on flipper color * ble-glue: remove debug * ble: intriduce serial service * ble: serial over ble * bt: serial echo server * bt: serial service process indicate acknowledge * bt: serial service event handler update * bt: refactore battery service * bt: add battery level apdate API * power: update battery level on change * bt: refactore device information service * app_ble: pairing configuration * bt: display pin code * bt: refactor battery service * bt: refactor device info service * bt: change advertise timer to freertos one * bt: separate app_ble to hci and gap * bt: increase max ble packet size * gap: refactoring * bt: refactor serial service * bt: support f7 target * bt: not blocking pin code show request Co-authored-by: Anna Prosvetova <anna@prosvetova.me> Co-authored-by: あく <alleteam@gmail.com> 2021-09-13 11:25:37 +00:00			`void battery_svc_start();`

			`void battery_svc_stop();`
[FL-1587] RFID: Clock for emulation timer from antenna (#622) * RFID: pull antenna down when emulating * Rfid: fixed HID emulation by adding zero pulse every 4 bits * Rfid: HID emulation fixed with DSP based FSK oscillator. * Rfid: receive 125KHz clock for emulation timer from antenna and comparator * Rfid: commented unused variable * Firmware: rollback changes in f6. * Add F7 target based on F6. * F7/F6: update cube projects, apply changes to the targets, update linker scripts with correct RAM start values. * FuriHal: RFID init routine. * Scripts: update OTP tool for v11 board Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com> 2021-09-10 02:19:02 +00:00
			`bool battery_svc_update_level(uint8_t battery_level);`

			`#ifdef __cplusplus`
			`}`
			`#endif`