flipperzero-firmware/firmware/targets/f7/furi_hal/furi_hal_bt.c

446 lines
13 KiB
C
Raw Normal View History

#include <furi_hal_bt.h>
#include <ble.h>
#include <stm32wbxx.h>
#include <shci.h>
#include <furi_hal_version.h>
#include <furi_hal_bt_hid.h>
#include <furi_hal_bt_serial.h>
#include "battery_service.h"
#include <furi.h>
#define TAG "FuriHalBt"
#define FURI_HAL_BT_DEFAULT_MAC_ADDR \
{ 0x6c, 0x7a, 0xd8, 0xac, 0x57, 0x72 }
/* Time, in ms, to wait for mode transition before crashing */
#define C2_MODE_SWITCH_TIMEOUT 10000
FuriMutex* furi_hal_bt_core2_mtx = NULL;
static FuriHalBtStack furi_hal_bt_stack = FuriHalBtStackUnknown;
typedef void (*FuriHalBtProfileStart)(void);
typedef void (*FuriHalBtProfileStop)(void);
typedef struct {
FuriHalBtProfileStart start;
FuriHalBtProfileStart stop;
GapConfig config;
uint16_t appearance_char;
uint16_t advertise_service_uuid;
} FuriHalBtProfileConfig;
FuriHalBtProfileConfig profile_config[FuriHalBtProfileNumber] = {
[FuriHalBtProfileSerial] =
{
.start = furi_hal_bt_serial_start,
.stop = furi_hal_bt_serial_stop,
.config =
{
.adv_service_uuid = 0x3080,
.appearance_char = 0x8600,
.bonding_mode = true,
.pairing_method = GapPairingPinCodeShow,
.mac_address = FURI_HAL_BT_DEFAULT_MAC_ADDR,
.conn_param =
{
.conn_int_min = 0x18, // 30 ms
.conn_int_max = 0x24, // 45 ms
.slave_latency = 0,
.supervisor_timeout = 0,
},
},
},
[FuriHalBtProfileHidKeyboard] =
{
.start = furi_hal_bt_hid_start,
.stop = furi_hal_bt_hid_stop,
.config =
{
.adv_service_uuid = HUMAN_INTERFACE_DEVICE_SERVICE_UUID,
.appearance_char = GAP_APPEARANCE_KEYBOARD,
.bonding_mode = true,
.pairing_method = GapPairingPinCodeVerifyYesNo,
.mac_address = FURI_HAL_BT_DEFAULT_MAC_ADDR,
.conn_param =
{
.conn_int_min = 0x18, // 30 ms
.conn_int_max = 0x24, // 45 ms
.slave_latency = 0,
.supervisor_timeout = 0,
},
},
},
};
FuriHalBtProfileConfig* current_profile = NULL;
2021-08-08 18:03:25 +00:00
void furi_hal_bt_init() {
if(!furi_hal_bt_core2_mtx) {
furi_hal_bt_core2_mtx = furi_mutex_alloc(FuriMutexTypeNormal);
furi_assert(furi_hal_bt_core2_mtx);
}
// Explicitly tell that we are in charge of CLK48 domain
if(!LL_HSEM_IsSemaphoreLocked(HSEM, CFG_HW_CLK48_CONFIG_SEMID)) {
furi_check(LL_HSEM_1StepLock(HSEM, CFG_HW_CLK48_CONFIG_SEMID) == 0);
}
// Start Core2
ble_glue_init();
}
void furi_hal_bt_lock_core2() {
furi_assert(furi_hal_bt_core2_mtx);
furi_check(furi_mutex_acquire(furi_hal_bt_core2_mtx, FuriWaitForever) == FuriStatusOk);
}
void furi_hal_bt_unlock_core2() {
furi_assert(furi_hal_bt_core2_mtx);
furi_check(furi_mutex_release(furi_hal_bt_core2_mtx) == FuriStatusOk);
}
static bool furi_hal_bt_radio_stack_is_supported(const BleGlueC2Info* info) {
bool supported = false;
if(info->StackType == INFO_STACK_TYPE_BLE_LIGHT) {
if(info->VersionMajor >= FURI_HAL_BT_STACK_VERSION_MAJOR &&
info->VersionMinor >= FURI_HAL_BT_STACK_VERSION_MINOR) {
furi_hal_bt_stack = FuriHalBtStackLight;
supported = true;
}
} else if(info->StackType == INFO_STACK_TYPE_BLE_FULL) {
if(info->VersionMajor >= FURI_HAL_BT_STACK_VERSION_MAJOR &&
info->VersionMinor >= FURI_HAL_BT_STACK_VERSION_MINOR) {
furi_hal_bt_stack = FuriHalBtStackFull;
supported = true;
}
} else {
furi_hal_bt_stack = FuriHalBtStackUnknown;
}
return supported;
}
bool furi_hal_bt_start_radio_stack() {
bool res = false;
furi_assert(furi_hal_bt_core2_mtx);
furi_mutex_acquire(furi_hal_bt_core2_mtx, FuriWaitForever);
// Explicitly tell that we are in charge of CLK48 domain
if(!LL_HSEM_IsSemaphoreLocked(HSEM, CFG_HW_CLK48_CONFIG_SEMID)) {
furi_check(LL_HSEM_1StepLock(HSEM, CFG_HW_CLK48_CONFIG_SEMID) == 0);
}
do {
// Wait until C2 is started or timeout
if(!ble_glue_wait_for_c2_start(FURI_HAL_BT_C2_START_TIMEOUT)) {
FURI_LOG_E(TAG, "Core2 start failed");
ble_glue_thread_stop();
break;
}
// If C2 is running, start radio stack fw
if(!furi_hal_bt_ensure_c2_mode(BleGlueC2ModeStack)) {
break;
}
// Check whether we support radio stack
const BleGlueC2Info* c2_info = ble_glue_get_c2_info();
if(!furi_hal_bt_radio_stack_is_supported(c2_info)) {
FURI_LOG_E(TAG, "Unsupported radio stack");
// Don't stop SHCI for crypto enclave support
break;
}
// Starting radio stack
if(!ble_glue_start()) {
FURI_LOG_E(TAG, "Failed to start radio stack");
ble_glue_thread_stop();
ble_app_thread_stop();
break;
}
res = true;
} while(false);
furi_mutex_release(furi_hal_bt_core2_mtx);
return res;
}
FuriHalBtStack furi_hal_bt_get_radio_stack() {
return furi_hal_bt_stack;
}
bool furi_hal_bt_is_ble_gatt_gap_supported() {
if(furi_hal_bt_stack == FuriHalBtStackLight || furi_hal_bt_stack == FuriHalBtStackFull) {
return true;
} else {
return false;
}
}
bool furi_hal_bt_is_testing_supported() {
if(furi_hal_bt_stack == FuriHalBtStackFull) {
return true;
} else {
return false;
}
}
bool furi_hal_bt_start_app(FuriHalBtProfile profile, GapEventCallback event_cb, void* context) {
furi_assert(event_cb);
furi_assert(profile < FuriHalBtProfileNumber);
bool ret = false;
do {
if(!ble_glue_is_radio_stack_ready()) {
FURI_LOG_E(TAG, "Can't start BLE App - radio stack did not start");
break;
}
if(!furi_hal_bt_is_ble_gatt_gap_supported()) {
FURI_LOG_E(TAG, "Can't start Ble App - unsupported radio stack");
break;
}
// Set mac address
memcpy(
profile_config[profile].config.mac_address,
furi_hal_version_get_ble_mac(),
sizeof(profile_config[profile].config.mac_address));
// Set advertise name
strlcpy(
profile_config[profile].config.adv_name,
furi_hal_version_get_ble_local_device_name_ptr(),
FURI_HAL_VERSION_DEVICE_NAME_LENGTH);
// Configure GAP
GapConfig* config = &profile_config[profile].config;
if(profile == FuriHalBtProfileSerial) {
config->adv_service_uuid |= furi_hal_version_get_hw_color();
} else if(profile == FuriHalBtProfileHidKeyboard) {
// Change MAC address for HID profile
config->mac_address[2]++;
// Change name Flipper -> Control
const char* clicker_str = "Control";
memcpy(&config->adv_name[1], clicker_str, strlen(clicker_str));
}
if(!gap_init(config, event_cb, context)) {
gap_thread_stop();
FURI_LOG_E(TAG, "Failed to init GAP");
break;
}
// Start selected profile services
if(furi_hal_bt_is_ble_gatt_gap_supported()) {
profile_config[profile].start();
}
ret = true;
} while(false);
current_profile = &profile_config[profile];
return ret;
}
[FL-2399, FL-2261] Tickless sleep shenanigans (#1168) * Disable USART in sleep * Restore UART state on suspend/resume * FuriHal: Enable stop mode and add insomnia to I2C and SPI * Remove IDLE interrupt * FuriHal: add FPU isr and disable all FPU interrupt, add core2 stop mode configuration on deep sleep * FuriHal: tie stop mode debug with debug rtc flag * FuriHal: adjust flash latency on clock switch, tie mcu debug with RTC debug flag * FuriHal: move resource init to early stage * Add EXTI pending check, enable debug traps with compile-time flag * Wrap sleep debug functions in conditional compilation * Remove erroneous changed * Do not use CSS, remove it from everywhere * Enable/disable USB on VBUS connect (prototype) * FuriHal: add LPMS and DEEPSLEEP magic, workaround state inconsistency between cores * FuriHal: honor c1 LMPS * USB mode switch fix * Applications: add flags and insomnia bypass system * Correct spelling * FuriHal: cleanup insomnia usage, reset sleep flags on wakeup, add shutdown api * FuriHal: extra check on reinit request * FuriHal: rename gpio_display_rst pin to gpio_display_rst_n * FuriHal: add debug HAL * FuriHal: add some magic to core2 reload procedure, fix issue with crash on ble keyboard exit * FuriHal: cleanup ble glue, add BLE_GLUE_DEBUG flag * FuriHal: ble reinit API, move os timer to LPTIM1 for deep sleep capability, shutdown that works * FuriHal: take insomnia while shutdown * Remove USB switch on/off on VBUS change * Better tick skew handling * Improve tick consistency under load * Add USB_HP dummy IRQ handler * Move interrupt check closer to sleep * Clean up includes * Re-enable Insomnia globally * FuriHal: enable CSS * FuriHal: remove questionable core2 clock shenanigans * FuriHal: use core1 RCC registers in idle timer config * FuriHal: return back CSS handlers, add lptim isr dispatching Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com> Co-authored-by: nminaylov <nm29719@gmail.com>
2022-04-29 13:29:51 +00:00
void furi_hal_bt_reinit() {
FURI_LOG_I(TAG, "Disconnect and stop advertising");
furi_hal_bt_stop_advertising();
FURI_LOG_I(TAG, "Stop current profile services");
current_profile->stop();
[FL-2399, FL-2261] Tickless sleep shenanigans (#1168) * Disable USART in sleep * Restore UART state on suspend/resume * FuriHal: Enable stop mode and add insomnia to I2C and SPI * Remove IDLE interrupt * FuriHal: add FPU isr and disable all FPU interrupt, add core2 stop mode configuration on deep sleep * FuriHal: tie stop mode debug with debug rtc flag * FuriHal: adjust flash latency on clock switch, tie mcu debug with RTC debug flag * FuriHal: move resource init to early stage * Add EXTI pending check, enable debug traps with compile-time flag * Wrap sleep debug functions in conditional compilation * Remove erroneous changed * Do not use CSS, remove it from everywhere * Enable/disable USB on VBUS connect (prototype) * FuriHal: add LPMS and DEEPSLEEP magic, workaround state inconsistency between cores * FuriHal: honor c1 LMPS * USB mode switch fix * Applications: add flags and insomnia bypass system * Correct spelling * FuriHal: cleanup insomnia usage, reset sleep flags on wakeup, add shutdown api * FuriHal: extra check on reinit request * FuriHal: rename gpio_display_rst pin to gpio_display_rst_n * FuriHal: add debug HAL * FuriHal: add some magic to core2 reload procedure, fix issue with crash on ble keyboard exit * FuriHal: cleanup ble glue, add BLE_GLUE_DEBUG flag * FuriHal: ble reinit API, move os timer to LPTIM1 for deep sleep capability, shutdown that works * FuriHal: take insomnia while shutdown * Remove USB switch on/off on VBUS change * Better tick skew handling * Improve tick consistency under load * Add USB_HP dummy IRQ handler * Move interrupt check closer to sleep * Clean up includes * Re-enable Insomnia globally * FuriHal: enable CSS * FuriHal: remove questionable core2 clock shenanigans * FuriHal: use core1 RCC registers in idle timer config * FuriHal: return back CSS handlers, add lptim isr dispatching Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com> Co-authored-by: nminaylov <nm29719@gmail.com>
2022-04-29 13:29:51 +00:00
// Magic happens here
hci_reset();
FURI_LOG_I(TAG, "Stop BLE related RTOS threads");
ble_app_thread_stop();
gap_thread_stop();
[FL-2399, FL-2261] Tickless sleep shenanigans (#1168) * Disable USART in sleep * Restore UART state on suspend/resume * FuriHal: Enable stop mode and add insomnia to I2C and SPI * Remove IDLE interrupt * FuriHal: add FPU isr and disable all FPU interrupt, add core2 stop mode configuration on deep sleep * FuriHal: tie stop mode debug with debug rtc flag * FuriHal: adjust flash latency on clock switch, tie mcu debug with RTC debug flag * FuriHal: move resource init to early stage * Add EXTI pending check, enable debug traps with compile-time flag * Wrap sleep debug functions in conditional compilation * Remove erroneous changed * Do not use CSS, remove it from everywhere * Enable/disable USB on VBUS connect (prototype) * FuriHal: add LPMS and DEEPSLEEP magic, workaround state inconsistency between cores * FuriHal: honor c1 LMPS * USB mode switch fix * Applications: add flags and insomnia bypass system * Correct spelling * FuriHal: cleanup insomnia usage, reset sleep flags on wakeup, add shutdown api * FuriHal: extra check on reinit request * FuriHal: rename gpio_display_rst pin to gpio_display_rst_n * FuriHal: add debug HAL * FuriHal: add some magic to core2 reload procedure, fix issue with crash on ble keyboard exit * FuriHal: cleanup ble glue, add BLE_GLUE_DEBUG flag * FuriHal: ble reinit API, move os timer to LPTIM1 for deep sleep capability, shutdown that works * FuriHal: take insomnia while shutdown * Remove USB switch on/off on VBUS change * Better tick skew handling * Improve tick consistency under load * Add USB_HP dummy IRQ handler * Move interrupt check closer to sleep * Clean up includes * Re-enable Insomnia globally * FuriHal: enable CSS * FuriHal: remove questionable core2 clock shenanigans * FuriHal: use core1 RCC registers in idle timer config * FuriHal: return back CSS handlers, add lptim isr dispatching Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com> Co-authored-by: nminaylov <nm29719@gmail.com>
2022-04-29 13:29:51 +00:00
FURI_LOG_I(TAG, "Reset SHCI");
[FL-2399, FL-2261] Tickless sleep shenanigans (#1168) * Disable USART in sleep * Restore UART state on suspend/resume * FuriHal: Enable stop mode and add insomnia to I2C and SPI * Remove IDLE interrupt * FuriHal: add FPU isr and disable all FPU interrupt, add core2 stop mode configuration on deep sleep * FuriHal: tie stop mode debug with debug rtc flag * FuriHal: adjust flash latency on clock switch, tie mcu debug with RTC debug flag * FuriHal: move resource init to early stage * Add EXTI pending check, enable debug traps with compile-time flag * Wrap sleep debug functions in conditional compilation * Remove erroneous changed * Do not use CSS, remove it from everywhere * Enable/disable USB on VBUS connect (prototype) * FuriHal: add LPMS and DEEPSLEEP magic, workaround state inconsistency between cores * FuriHal: honor c1 LMPS * USB mode switch fix * Applications: add flags and insomnia bypass system * Correct spelling * FuriHal: cleanup insomnia usage, reset sleep flags on wakeup, add shutdown api * FuriHal: extra check on reinit request * FuriHal: rename gpio_display_rst pin to gpio_display_rst_n * FuriHal: add debug HAL * FuriHal: add some magic to core2 reload procedure, fix issue with crash on ble keyboard exit * FuriHal: cleanup ble glue, add BLE_GLUE_DEBUG flag * FuriHal: ble reinit API, move os timer to LPTIM1 for deep sleep capability, shutdown that works * FuriHal: take insomnia while shutdown * Remove USB switch on/off on VBUS change * Better tick skew handling * Improve tick consistency under load * Add USB_HP dummy IRQ handler * Move interrupt check closer to sleep * Clean up includes * Re-enable Insomnia globally * FuriHal: enable CSS * FuriHal: remove questionable core2 clock shenanigans * FuriHal: use core1 RCC registers in idle timer config * FuriHal: return back CSS handlers, add lptim isr dispatching Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com> Co-authored-by: nminaylov <nm29719@gmail.com>
2022-04-29 13:29:51 +00:00
furi_check(ble_glue_reinit_c2());
furi_delay_ms(100);
ble_glue_thread_stop();
[FL-2399, FL-2261] Tickless sleep shenanigans (#1168) * Disable USART in sleep * Restore UART state on suspend/resume * FuriHal: Enable stop mode and add insomnia to I2C and SPI * Remove IDLE interrupt * FuriHal: add FPU isr and disable all FPU interrupt, add core2 stop mode configuration on deep sleep * FuriHal: tie stop mode debug with debug rtc flag * FuriHal: adjust flash latency on clock switch, tie mcu debug with RTC debug flag * FuriHal: move resource init to early stage * Add EXTI pending check, enable debug traps with compile-time flag * Wrap sleep debug functions in conditional compilation * Remove erroneous changed * Do not use CSS, remove it from everywhere * Enable/disable USB on VBUS connect (prototype) * FuriHal: add LPMS and DEEPSLEEP magic, workaround state inconsistency between cores * FuriHal: honor c1 LMPS * USB mode switch fix * Applications: add flags and insomnia bypass system * Correct spelling * FuriHal: cleanup insomnia usage, reset sleep flags on wakeup, add shutdown api * FuriHal: extra check on reinit request * FuriHal: rename gpio_display_rst pin to gpio_display_rst_n * FuriHal: add debug HAL * FuriHal: add some magic to core2 reload procedure, fix issue with crash on ble keyboard exit * FuriHal: cleanup ble glue, add BLE_GLUE_DEBUG flag * FuriHal: ble reinit API, move os timer to LPTIM1 for deep sleep capability, shutdown that works * FuriHal: take insomnia while shutdown * Remove USB switch on/off on VBUS change * Better tick skew handling * Improve tick consistency under load * Add USB_HP dummy IRQ handler * Move interrupt check closer to sleep * Clean up includes * Re-enable Insomnia globally * FuriHal: enable CSS * FuriHal: remove questionable core2 clock shenanigans * FuriHal: use core1 RCC registers in idle timer config * FuriHal: return back CSS handlers, add lptim isr dispatching Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com> Co-authored-by: nminaylov <nm29719@gmail.com>
2022-04-29 13:29:51 +00:00
FURI_LOG_I(TAG, "Start BT initialization");
furi_hal_bt_init();
[FL-2399, FL-2261] Tickless sleep shenanigans (#1168) * Disable USART in sleep * Restore UART state on suspend/resume * FuriHal: Enable stop mode and add insomnia to I2C and SPI * Remove IDLE interrupt * FuriHal: add FPU isr and disable all FPU interrupt, add core2 stop mode configuration on deep sleep * FuriHal: tie stop mode debug with debug rtc flag * FuriHal: adjust flash latency on clock switch, tie mcu debug with RTC debug flag * FuriHal: move resource init to early stage * Add EXTI pending check, enable debug traps with compile-time flag * Wrap sleep debug functions in conditional compilation * Remove erroneous changed * Do not use CSS, remove it from everywhere * Enable/disable USB on VBUS connect (prototype) * FuriHal: add LPMS and DEEPSLEEP magic, workaround state inconsistency between cores * FuriHal: honor c1 LMPS * USB mode switch fix * Applications: add flags and insomnia bypass system * Correct spelling * FuriHal: cleanup insomnia usage, reset sleep flags on wakeup, add shutdown api * FuriHal: extra check on reinit request * FuriHal: rename gpio_display_rst pin to gpio_display_rst_n * FuriHal: add debug HAL * FuriHal: add some magic to core2 reload procedure, fix issue with crash on ble keyboard exit * FuriHal: cleanup ble glue, add BLE_GLUE_DEBUG flag * FuriHal: ble reinit API, move os timer to LPTIM1 for deep sleep capability, shutdown that works * FuriHal: take insomnia while shutdown * Remove USB switch on/off on VBUS change * Better tick skew handling * Improve tick consistency under load * Add USB_HP dummy IRQ handler * Move interrupt check closer to sleep * Clean up includes * Re-enable Insomnia globally * FuriHal: enable CSS * FuriHal: remove questionable core2 clock shenanigans * FuriHal: use core1 RCC registers in idle timer config * FuriHal: return back CSS handlers, add lptim isr dispatching Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com> Co-authored-by: nminaylov <nm29719@gmail.com>
2022-04-29 13:29:51 +00:00
furi_hal_bt_start_radio_stack();
[FL-2399, FL-2261] Tickless sleep shenanigans (#1168) * Disable USART in sleep * Restore UART state on suspend/resume * FuriHal: Enable stop mode and add insomnia to I2C and SPI * Remove IDLE interrupt * FuriHal: add FPU isr and disable all FPU interrupt, add core2 stop mode configuration on deep sleep * FuriHal: tie stop mode debug with debug rtc flag * FuriHal: adjust flash latency on clock switch, tie mcu debug with RTC debug flag * FuriHal: move resource init to early stage * Add EXTI pending check, enable debug traps with compile-time flag * Wrap sleep debug functions in conditional compilation * Remove erroneous changed * Do not use CSS, remove it from everywhere * Enable/disable USB on VBUS connect (prototype) * FuriHal: add LPMS and DEEPSLEEP magic, workaround state inconsistency between cores * FuriHal: honor c1 LMPS * USB mode switch fix * Applications: add flags and insomnia bypass system * Correct spelling * FuriHal: cleanup insomnia usage, reset sleep flags on wakeup, add shutdown api * FuriHal: extra check on reinit request * FuriHal: rename gpio_display_rst pin to gpio_display_rst_n * FuriHal: add debug HAL * FuriHal: add some magic to core2 reload procedure, fix issue with crash on ble keyboard exit * FuriHal: cleanup ble glue, add BLE_GLUE_DEBUG flag * FuriHal: ble reinit API, move os timer to LPTIM1 for deep sleep capability, shutdown that works * FuriHal: take insomnia while shutdown * Remove USB switch on/off on VBUS change * Better tick skew handling * Improve tick consistency under load * Add USB_HP dummy IRQ handler * Move interrupt check closer to sleep * Clean up includes * Re-enable Insomnia globally * FuriHal: enable CSS * FuriHal: remove questionable core2 clock shenanigans * FuriHal: use core1 RCC registers in idle timer config * FuriHal: return back CSS handlers, add lptim isr dispatching Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com> Co-authored-by: nminaylov <nm29719@gmail.com>
2022-04-29 13:29:51 +00:00
}
bool furi_hal_bt_change_app(FuriHalBtProfile profile, GapEventCallback event_cb, void* context) {
furi_assert(event_cb);
furi_assert(profile < FuriHalBtProfileNumber);
bool ret = true;
furi_hal_bt_reinit();
ret = furi_hal_bt_start_app(profile, event_cb, context);
if(ret) {
current_profile = &profile_config[profile];
}
return ret;
}
bool furi_hal_bt_is_active() {
return gap_get_state() > GapStateIdle;
}
void furi_hal_bt_start_advertising() {
if(gap_get_state() == GapStateIdle) {
gap_start_advertising();
}
}
void furi_hal_bt_stop_advertising() {
if(furi_hal_bt_is_active()) {
gap_stop_advertising();
while(furi_hal_bt_is_active()) {
furi_delay_tick(1);
}
}
}
void furi_hal_bt_update_battery_level(uint8_t battery_level) {
if(battery_svc_is_started()) {
battery_svc_update_level(battery_level);
}
}
void furi_hal_bt_update_power_state() {
if(battery_svc_is_started()) {
battery_svc_update_power_state();
}
}
void furi_hal_bt_get_key_storage_buff(uint8_t** key_buff_addr, uint16_t* key_buff_size) {
ble_app_get_key_storage_buff(key_buff_addr, key_buff_size);
}
void furi_hal_bt_set_key_storage_change_callback(
BleGlueKeyStorageChangedCallback callback,
void* context) {
furi_assert(callback);
ble_glue_set_key_storage_changed_callback(callback, context);
}
void furi_hal_bt_nvm_sram_sem_acquire() {
while(LL_HSEM_1StepLock(HSEM, CFG_HW_BLE_NVM_SRAM_SEMID)) {
furi_thread_yield();
}
}
void furi_hal_bt_nvm_sram_sem_release() {
LL_HSEM_ReleaseLock(HSEM, CFG_HW_BLE_NVM_SRAM_SEMID, 0);
}
bool furi_hal_bt_clear_white_list() {
furi_hal_bt_nvm_sram_sem_acquire();
tBleStatus status = aci_gap_clear_security_db();
if(status) {
FURI_LOG_E(TAG, "Clear while list failed with status %d", status);
}
furi_hal_bt_nvm_sram_sem_release();
return status != BLE_STATUS_SUCCESS;
}
2021-08-08 18:03:25 +00:00
void furi_hal_bt_dump_state(string_t buffer) {
if(furi_hal_bt_is_alive()) {
uint8_t HCI_Version;
uint16_t HCI_Revision;
uint8_t LMP_PAL_Version;
uint16_t Manufacturer_Name;
uint16_t LMP_PAL_Subversion;
tBleStatus ret = hci_read_local_version_information(
&HCI_Version, &HCI_Revision, &LMP_PAL_Version, &Manufacturer_Name, &LMP_PAL_Subversion);
string_cat_printf(
buffer,
"Ret: %d, HCI_Version: %d, HCI_Revision: %d, LMP_PAL_Version: %d, Manufacturer_Name: %d, LMP_PAL_Subversion: %d",
ret,
HCI_Version,
HCI_Revision,
LMP_PAL_Version,
Manufacturer_Name,
LMP_PAL_Subversion);
} else {
string_cat_printf(buffer, "BLE not ready");
}
}
2021-08-08 18:03:25 +00:00
bool furi_hal_bt_is_alive() {
return ble_glue_is_alive();
}
2021-08-08 18:03:25 +00:00
void furi_hal_bt_start_tone_tx(uint8_t channel, uint8_t power) {
aci_hal_set_tx_power_level(0, power);
aci_hal_tone_start(channel, 0);
}
2021-08-08 18:03:25 +00:00
void furi_hal_bt_stop_tone_tx() {
aci_hal_tone_stop();
}
2021-08-08 18:03:25 +00:00
void furi_hal_bt_start_packet_tx(uint8_t channel, uint8_t pattern, uint8_t datarate) {
hci_le_enhanced_transmitter_test(channel, 0x25, pattern, datarate);
}
2021-08-08 18:03:25 +00:00
void furi_hal_bt_start_packet_rx(uint8_t channel, uint8_t datarate) {
hci_le_enhanced_receiver_test(channel, datarate, 0);
}
2021-08-08 18:03:25 +00:00
uint16_t furi_hal_bt_stop_packet_test() {
uint16_t num_of_packets = 0;
hci_le_test_end(&num_of_packets);
return num_of_packets;
}
2021-08-08 18:03:25 +00:00
void furi_hal_bt_start_rx(uint8_t channel) {
aci_hal_rx_start(channel);
}
2021-08-08 18:03:25 +00:00
float furi_hal_bt_get_rssi() {
float val;
uint8_t rssi_raw[3];
if(aci_hal_read_raw_rssi(rssi_raw) != BLE_STATUS_SUCCESS) {
return 0.0f;
}
// Some ST magic with rssi
uint8_t agc = rssi_raw[2] & 0xFF;
int rssi = (((int)rssi_raw[1] << 8) & 0xFF00) + (rssi_raw[0] & 0xFF);
if(rssi == 0 || agc > 11) {
val = -127.0;
} else {
val = agc * 6.0f - 127.0f;
while(rssi > 30) {
val += 6.0;
rssi >>= 1;
}
val += (417 * rssi + 18080) >> 10;
}
return val;
}
2021-08-08 18:03:25 +00:00
uint32_t furi_hal_bt_get_transmitted_packets() {
uint32_t packets = 0;
aci_hal_le_tx_test_packet_number(&packets);
return packets;
}
2021-08-08 18:03:25 +00:00
void furi_hal_bt_stop_rx() {
aci_hal_rx_stop();
}
bool furi_hal_bt_ensure_c2_mode(BleGlueC2Mode mode) {
BleGlueCommandResult fw_start_res = ble_glue_force_c2_mode(mode);
if(fw_start_res == BleGlueCommandResultOK) {
return true;
} else if(fw_start_res == BleGlueCommandResultRestartPending) {
// Do nothing and wait for system reset
furi_delay_ms(C2_MODE_SWITCH_TIMEOUT);
furi_crash("Waiting for FUS->radio stack transition");
return true;
}
FURI_LOG_E(TAG, "Failed to switch C2 mode: %d", fw_start_res);
return false;
}