flipperzero-firmware/target_f2/Src/stm32l4xx_hal_msp.c

/* USER CODE BEGIN Header */
/**
  ******************************************************************************
  * File Name          : stm32l4xx_hal_msp.c
  * Description        : This file provides code for the MSP Initialization 
  *                      and de-Initialization codes.
  ******************************************************************************
  * @attention
  *
  * <h2><center>&copy; Copyright (c) 2020 STMicroelectronics.
  * All rights reserved.</center></h2>
  *
  * This software component is licensed by ST under Ultimate Liberty license
  * SLA0044, the "License"; You may not use this file except in compliance with
  * the License. You may obtain a copy of the License at:
  *                             www.st.com/SLA0044
  *
  ******************************************************************************
  */
/* USER CODE END Header */

/* Includes ------------------------------------------------------------------*/
#include "main.h"
/* USER CODE BEGIN Includes */

/* USER CODE END Includes */

/* Private typedef -----------------------------------------------------------*/
/* USER CODE BEGIN TD */

/* USER CODE END TD */

/* Private define ------------------------------------------------------------*/
/* USER CODE BEGIN Define */

/* USER CODE END Define */

/* Private macro -------------------------------------------------------------*/
/* USER CODE BEGIN Macro */

/* USER CODE END Macro */

/* Private variables ---------------------------------------------------------*/
/* USER CODE BEGIN PV */

/* USER CODE END PV */

/* Private function prototypes -----------------------------------------------*/
/* USER CODE BEGIN PFP */

/* USER CODE END PFP */

/* External functions --------------------------------------------------------*/
/* USER CODE BEGIN ExternalFunctions */

/* USER CODE END ExternalFunctions */

/* USER CODE BEGIN 0 */

/* USER CODE END 0 */

void HAL_TIM_MspPostInit(TIM_HandleTypeDef* htim);
/**
  * Initializes the Global MSP.
  */
void HAL_MspInit(void) {
    /* USER CODE BEGIN MspInit 0 */

    /* USER CODE END MspInit 0 */

    __HAL_RCC_SYSCFG_CLK_ENABLE();
    __HAL_RCC_PWR_CLK_ENABLE();

    /* System interrupt init*/
    /* PendSV_IRQn interrupt configuration */
    HAL_NVIC_SetPriority(PendSV_IRQn, 15, 0);

    /* USER CODE BEGIN MspInit 1 */

    /* USER CODE END MspInit 1 */
}

/**
* @brief ADC MSP Initialization
* This function configures the hardware resources used in this example
* @param hadc: ADC handle pointer
* @retval None
*/
void HAL_ADC_MspInit(ADC_HandleTypeDef* hadc) {
    GPIO_InitTypeDef GPIO_InitStruct = {0};
    if(hadc->Instance == ADC1) {
        /* USER CODE BEGIN ADC1_MspInit 0 */

        /* USER CODE END ADC1_MspInit 0 */
        /* Peripheral clock enable */
        __HAL_RCC_ADC_CLK_ENABLE();

        __HAL_RCC_GPIOC_CLK_ENABLE();
        __HAL_RCC_GPIOA_CLK_ENABLE();
        /**ADC1 GPIO Configuration    
    PC3     ------> ADC1_IN4
    PA0     ------> ADC1_IN5 
    */
        GPIO_InitStruct.Pin = BATT_V_Pin;
        GPIO_InitStruct.Mode = GPIO_MODE_ANALOG_ADC_CONTROL;
        GPIO_InitStruct.Pull = GPIO_NOPULL;
        HAL_GPIO_Init(BATT_V_GPIO_Port, &GPIO_InitStruct);

        GPIO_InitStruct.Pin = IR_RX_Pin;
        GPIO_InitStruct.Mode = GPIO_MODE_ANALOG_ADC_CONTROL;
        GPIO_InitStruct.Pull = GPIO_NOPULL;
        HAL_GPIO_Init(IR_RX_GPIO_Port, &GPIO_InitStruct);

        /* USER CODE BEGIN ADC1_MspInit 1 */

        /* USER CODE END ADC1_MspInit 1 */
    }
}

/**
* @brief ADC MSP De-Initialization
* This function freeze the hardware resources used in this example
* @param hadc: ADC handle pointer
* @retval None
*/
void HAL_ADC_MspDeInit(ADC_HandleTypeDef* hadc) {
    if(hadc->Instance == ADC1) {
        /* USER CODE BEGIN ADC1_MspDeInit 0 */

        /* USER CODE END ADC1_MspDeInit 0 */
        /* Peripheral clock disable */
        __HAL_RCC_ADC_CLK_DISABLE();

        /**ADC1 GPIO Configuration    
    PC3     ------> ADC1_IN4
    PA0     ------> ADC1_IN5 
    */
        HAL_GPIO_DeInit(BATT_V_GPIO_Port, BATT_V_Pin);

        HAL_GPIO_DeInit(IR_RX_GPIO_Port, IR_RX_Pin);

        /* USER CODE BEGIN ADC1_MspDeInit 1 */

        /* USER CODE END ADC1_MspDeInit 1 */
    }
}

/**
* @brief COMP MSP Initialization
* This function configures the hardware resources used in this example
* @param hcomp: COMP handle pointer
* @retval None
*/
void HAL_COMP_MspInit(COMP_HandleTypeDef* hcomp) {
    GPIO_InitTypeDef GPIO_InitStruct = {0};
    if(hcomp->Instance == COMP1) {
        /* USER CODE BEGIN COMP1_MspInit 0 */

        /* USER CODE END COMP1_MspInit 0 */

        __HAL_RCC_GPIOC_CLK_ENABLE();
        /**COMP1 GPIO Configuration    
    PC5     ------> COMP1_INP 
    */
        GPIO_InitStruct.Pin = RFID_RF_IN_Pin;
        GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
        GPIO_InitStruct.Pull = GPIO_NOPULL;
        HAL_GPIO_Init(RFID_RF_IN_GPIO_Port, &GPIO_InitStruct);

        /* USER CODE BEGIN COMP1_MspInit 1 */

        /* USER CODE END COMP1_MspInit 1 */
    }
}

/**
* @brief COMP MSP De-Initialization
* This function freeze the hardware resources used in this example
* @param hcomp: COMP handle pointer
* @retval None
*/
void HAL_COMP_MspDeInit(COMP_HandleTypeDef* hcomp) {
    if(hcomp->Instance == COMP1) {
        /* USER CODE BEGIN COMP1_MspDeInit 0 */

        /* USER CODE END COMP1_MspDeInit 0 */

        /**COMP1 GPIO Configuration    
    PC5     ------> COMP1_INP 
    */
        HAL_GPIO_DeInit(RFID_RF_IN_GPIO_Port, RFID_RF_IN_Pin);

        /* USER CODE BEGIN COMP1_MspDeInit 1 */

        /* USER CODE END COMP1_MspDeInit 1 */
    }
}

/**
* @brief SPI MSP Initialization
* This function configures the hardware resources used in this example
* @param hspi: SPI handle pointer
* @retval None
*/
void HAL_SPI_MspInit(SPI_HandleTypeDef* hspi) {
    GPIO_InitTypeDef GPIO_InitStruct = {0};
    if(hspi->Instance == SPI1) {
        /* USER CODE BEGIN SPI1_MspInit 0 */

        /* USER CODE END SPI1_MspInit 0 */
        /* Peripheral clock enable */
        __HAL_RCC_SPI1_CLK_ENABLE();

        __HAL_RCC_GPIOB_CLK_ENABLE();
        /**SPI1 GPIO Configuration    
    PB3 (JTDO-TRACESWO)     ------> SPI1_SCK
    PB5     ------> SPI1_MOSI 
    */
        GPIO_InitStruct.Pin = GPIO_PIN_3 | GPIO_PIN_5;
        GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
        GPIO_InitStruct.Pull = GPIO_NOPULL;
        GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
        GPIO_InitStruct.Alternate = GPIO_AF5_SPI1;
        HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);

        /* USER CODE BEGIN SPI1_MspInit 1 */

        /* USER CODE END SPI1_MspInit 1 */
    } else if(hspi->Instance == SPI3) {
        /* USER CODE BEGIN SPI3_MspInit 0 */

        /* USER CODE END SPI3_MspInit 0 */
        /* Peripheral clock enable */
        __HAL_RCC_SPI3_CLK_ENABLE();

        __HAL_RCC_GPIOC_CLK_ENABLE();
        /**SPI3 GPIO Configuration    
    PC10     ------> SPI3_SCK
    PC11     ------> SPI3_MISO
    PC12     ------> SPI3_MOSI 
    */
        GPIO_InitStruct.Pin = GPIO_PIN_10 | GPIO_PIN_11 | GPIO_PIN_12;
        GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
        GPIO_InitStruct.Pull = GPIO_NOPULL;
        GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
        GPIO_InitStruct.Alternate = GPIO_AF6_SPI3;
        HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);

        /* USER CODE BEGIN SPI3_MspInit 1 */

        /* USER CODE END SPI3_MspInit 1 */
    }
}

/**
* @brief SPI MSP De-Initialization
* This function freeze the hardware resources used in this example
* @param hspi: SPI handle pointer
* @retval None
*/
void HAL_SPI_MspDeInit(SPI_HandleTypeDef* hspi) {
    if(hspi->Instance == SPI1) {
        /* USER CODE BEGIN SPI1_MspDeInit 0 */

        /* USER CODE END SPI1_MspDeInit 0 */
        /* Peripheral clock disable */
        __HAL_RCC_SPI1_CLK_DISABLE();

        /**SPI1 GPIO Configuration    
    PB3 (JTDO-TRACESWO)     ------> SPI1_SCK
    PB5     ------> SPI1_MOSI 
    */
        HAL_GPIO_DeInit(GPIOB, GPIO_PIN_3 | GPIO_PIN_5);

        /* USER CODE BEGIN SPI1_MspDeInit 1 */

        /* USER CODE END SPI1_MspDeInit 1 */
    } else if(hspi->Instance == SPI3) {
        /* USER CODE BEGIN SPI3_MspDeInit 0 */

        /* USER CODE END SPI3_MspDeInit 0 */
        /* Peripheral clock disable */
        __HAL_RCC_SPI3_CLK_DISABLE();

        /**SPI3 GPIO Configuration    
    PC10     ------> SPI3_SCK
    PC11     ------> SPI3_MISO
    PC12     ------> SPI3_MOSI 
    */
        HAL_GPIO_DeInit(GPIOC, GPIO_PIN_10 | GPIO_PIN_11 | GPIO_PIN_12);

        /* USER CODE BEGIN SPI3_MspDeInit 1 */

        /* USER CODE END SPI3_MspDeInit 1 */
    }
}

/**
* @brief TIM_PWM MSP Initialization
* This function configures the hardware resources used in this example
* @param htim_pwm: TIM_PWM handle pointer
* @retval None
*/
void HAL_TIM_PWM_MspInit(TIM_HandleTypeDef* htim_pwm) {
    if(htim_pwm->Instance == TIM5) {
        /* USER CODE BEGIN TIM5_MspInit 0 */

        /* USER CODE END TIM5_MspInit 0 */
        /* Peripheral clock enable */
        __HAL_RCC_TIM5_CLK_ENABLE();
        /* USER CODE BEGIN TIM5_MspInit 1 */

        /* USER CODE END TIM5_MspInit 1 */
    }
}

/**
* @brief TIM_Base MSP Initialization
* This function configures the hardware resources used in this example
* @param htim_base: TIM_Base handle pointer
* @retval None
*/
void HAL_TIM_Base_MspInit(TIM_HandleTypeDef* htim_base) {
    GPIO_InitTypeDef GPIO_InitStruct = {0};
    if(htim_base->Instance == TIM8) {
        /* USER CODE BEGIN TIM8_MspInit 0 */

        /* USER CODE END TIM8_MspInit 0 */
        /* Peripheral clock enable */
        __HAL_RCC_TIM8_CLK_ENABLE();

        __HAL_RCC_GPIOC_CLK_ENABLE();
        /**TIM8 GPIO Configuration    
    PC7     ------> TIM8_CH2 
    */
        GPIO_InitStruct.Pin = iButton_Pin;
        GPIO_InitStruct.Mode = GPIO_MODE_AF_OD;
        GPIO_InitStruct.Pull = GPIO_NOPULL;
        GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_MEDIUM;
        GPIO_InitStruct.Alternate = GPIO_AF3_TIM8;
        HAL_GPIO_Init(iButton_GPIO_Port, &GPIO_InitStruct);

        /* TIM8 interrupt Init */
        HAL_NVIC_SetPriority(TIM8_CC_IRQn, 5, 0);
        HAL_NVIC_EnableIRQ(TIM8_CC_IRQn);
        /* USER CODE BEGIN TIM8_MspInit 1 */

        /* USER CODE END TIM8_MspInit 1 */
    }
}

/**
* @brief TIM_OC MSP Initialization
* This function configures the hardware resources used in this example
* @param htim_oc: TIM_OC handle pointer
* @retval None
*/
void HAL_TIM_OC_MspInit(TIM_HandleTypeDef* htim_oc) {
    if(htim_oc->Instance == TIM15) {
        /* USER CODE BEGIN TIM15_MspInit 0 */

        /* USER CODE END TIM15_MspInit 0 */
        /* Peripheral clock enable */
        __HAL_RCC_TIM15_CLK_ENABLE();
        /* USER CODE BEGIN TIM15_MspInit 1 */

        /* USER CODE END TIM15_MspInit 1 */
    }
}

void HAL_TIM_MspPostInit(TIM_HandleTypeDef* htim) {
    GPIO_InitTypeDef GPIO_InitStruct = {0};
    if(htim->Instance == TIM5) {
        /* USER CODE BEGIN TIM5_MspPostInit 0 */

        /* USER CODE END TIM5_MspPostInit 0 */
        __HAL_RCC_GPIOA_CLK_ENABLE();
        /**TIM5 GPIO Configuration    
    PA3     ------> TIM5_CH4 
    */
        GPIO_InitStruct.Pin = SPEAKER_Pin;
        GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
        GPIO_InitStruct.Pull = GPIO_NOPULL;
        GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
        GPIO_InitStruct.Alternate = GPIO_AF2_TIM5;
        HAL_GPIO_Init(SPEAKER_GPIO_Port, &GPIO_InitStruct);

        /* USER CODE BEGIN TIM5_MspPostInit 1 */

        /* USER CODE END TIM5_MspPostInit 1 */
    } else if(htim->Instance == TIM15) {
        /* USER CODE BEGIN TIM15_MspPostInit 0 */

        /* USER CODE END TIM15_MspPostInit 0 */

        __HAL_RCC_GPIOB_CLK_ENABLE();
        /**TIM15 GPIO Configuration    
    PB13     ------> TIM15_CH1N
    PB15     ------> TIM15_CH2 
    */
        GPIO_InitStruct.Pin = RFID_OUT_Pin | RFID_PULL_Pin;
        GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
        GPIO_InitStruct.Pull = GPIO_NOPULL;
        GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
        GPIO_InitStruct.Alternate = GPIO_AF14_TIM15;
        HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);

        /* USER CODE BEGIN TIM15_MspPostInit 1 */

        /* USER CODE END TIM15_MspPostInit 1 */
    }
}
/**
* @brief TIM_PWM MSP De-Initialization
* This function freeze the hardware resources used in this example
* @param htim_pwm: TIM_PWM handle pointer
* @retval None
*/
void HAL_TIM_PWM_MspDeInit(TIM_HandleTypeDef* htim_pwm) {
    if(htim_pwm->Instance == TIM5) {
        /* USER CODE BEGIN TIM5_MspDeInit 0 */

        /* USER CODE END TIM5_MspDeInit 0 */
        /* Peripheral clock disable */
        __HAL_RCC_TIM5_CLK_DISABLE();
        /* USER CODE BEGIN TIM5_MspDeInit 1 */

        /* USER CODE END TIM5_MspDeInit 1 */
    }
}

/**
* @brief TIM_Base MSP De-Initialization
* This function freeze the hardware resources used in this example
* @param htim_base: TIM_Base handle pointer
* @retval None
*/
void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef* htim_base) {
    if(htim_base->Instance == TIM8) {
        /* USER CODE BEGIN TIM8_MspDeInit 0 */

        /* USER CODE END TIM8_MspDeInit 0 */
        /* Peripheral clock disable */
        __HAL_RCC_TIM8_CLK_DISABLE();

        /**TIM8 GPIO Configuration    
    PC7     ------> TIM8_CH2 
    */
        HAL_GPIO_DeInit(iButton_GPIO_Port, iButton_Pin);

        /* TIM8 interrupt DeInit */
        HAL_NVIC_DisableIRQ(TIM8_CC_IRQn);
        /* USER CODE BEGIN TIM8_MspDeInit 1 */

        /* USER CODE END TIM8_MspDeInit 1 */
    }
}

/**
* @brief TIM_OC MSP De-Initialization
* This function freeze the hardware resources used in this example
* @param htim_oc: TIM_OC handle pointer
* @retval None
*/
void HAL_TIM_OC_MspDeInit(TIM_HandleTypeDef* htim_oc) {
    if(htim_oc->Instance == TIM15) {
        /* USER CODE BEGIN TIM15_MspDeInit 0 */

        /* USER CODE END TIM15_MspDeInit 0 */
        /* Peripheral clock disable */
        __HAL_RCC_TIM15_CLK_DISABLE();
        /* USER CODE BEGIN TIM15_MspDeInit 1 */

        /* USER CODE END TIM15_MspDeInit 1 */
    }
}

/**
* @brief UART MSP Initialization
* This function configures the hardware resources used in this example
* @param huart: UART handle pointer
* @retval None
*/
void HAL_UART_MspInit(UART_HandleTypeDef* huart) {
    GPIO_InitTypeDef GPIO_InitStruct = {0};
    if(huart->Instance == USART1) {
        /* USER CODE BEGIN USART1_MspInit 0 */

        /* USER CODE END USART1_MspInit 0 */
        /* Peripheral clock enable */
        __HAL_RCC_USART1_CLK_ENABLE();

        __HAL_RCC_GPIOA_CLK_ENABLE();
        /**USART1 GPIO Configuration    
    PA9     ------> USART1_TX
    PA10     ------> USART1_RX 
    */
        GPIO_InitStruct.Pin = GPIO_PIN_9 | GPIO_PIN_10;
        GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
        GPIO_InitStruct.Pull = GPIO_NOPULL;
        GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
        GPIO_InitStruct.Alternate = GPIO_AF7_USART1;
        HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);

        /* USER CODE BEGIN USART1_MspInit 1 */

        /* USER CODE END USART1_MspInit 1 */
    }
}

/**
* @brief UART MSP De-Initialization
* This function freeze the hardware resources used in this example
* @param huart: UART handle pointer
* @retval None
*/
void HAL_UART_MspDeInit(UART_HandleTypeDef* huart) {
    if(huart->Instance == USART1) {
        /* USER CODE BEGIN USART1_MspDeInit 0 */

        /* USER CODE END USART1_MspDeInit 0 */
        /* Peripheral clock disable */
        __HAL_RCC_USART1_CLK_DISABLE();

        /**USART1 GPIO Configuration    
    PA9     ------> USART1_TX
    PA10     ------> USART1_RX 
    */
        HAL_GPIO_DeInit(GPIOA, GPIO_PIN_9 | GPIO_PIN_10);

        /* USER CODE BEGIN USART1_MspDeInit 1 */

        /* USER CODE END USART1_MspDeInit 1 */
    }
}

/* USER CODE BEGIN 1 */

/* USER CODE END 1 */

/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/