flipperzero-firmware/firmware/targets/f6/api-hal/api-hal-subghz.c

#include "api-hal-subghz.h"

#include <api-hal-gpio.h>
#include <api-hal-spi.h>
#include <api-hal-interrupt.h>
#include <api-hal-resources.h>

#include <furi.h>
#include <cc1101.h>
#include <stdio.h>

static volatile SubGhzState api_hal_subghz_state = SubGhzStateInit;

static const uint8_t api_hal_subghz_preset_ook_async_regs[][2] = {
    /* Base setting */
    { CC1101_IOCFG0,    0x0D }, // GD0 as async serial data output/input
    { CC1101_MCSM0,     0x18 }, // Autocalibrate on idle to TRX, ~150us OSC guard time

    /* Async OOK Specific things */
    { CC1101_MDMCFG2,   0x30 }, // ASK/OOK, No preamble/sync
    { CC1101_PKTCTRL0,  0x32 }, // Async, no CRC, Infinite
    { CC1101_FREND0,    0x01 }, // OOK/ASK PATABLE

    /* End  */
    { 0, 0 },
};

static const uint8_t api_hal_subghz_preset_ook_async_patable[8] = {
    0x00, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};

static const uint8_t api_hal_subghz_preset_mp_regs[][2] = {
    //https://e2e.ti.com/support/wireless-connectivity/sub-1-ghz-group/sub-1-ghz/f/sub-1-ghz-forum/382066/cc1101---don-t-know-the-correct-registers-configuration
    
    //конфигугация GO0
    { CC1101_IOCFG0, 0x0D },        //Конфигурация вывода GDO2, Инвертирование логического уровня: низкий = "1", высокий = "0"

    { CC1101_FIFOTHR, 0x47 },       //Пороги RX FIFO и TX FIFO

    //настройка синтезатора частоты
    { CC1101_PKTCTRL0, 0x32 },
    //{ CC1101_FSCTRL1,  0x0E },
    { CC1101_FSCTRL1, 0x06 },

    //настройка частоты
    { CC1101_FREQ2, 0x10 },
    { CC1101_FREQ1, 0xB0 },
    { CC1101_FREQ0, 0x7F },

    //{ CC1101_MDMCFG4, 0x17 },     //ширина диапазона фильтра канала 650кГц изменить CC1101_FIFOTHR 0х07, CC1101_TEST2 0х88, CC1101_TEST1 0х31
    { CC1101_MDMCFG4, 0x67 },       //ширина диапазона фильтра канала 270кГц изменить CC1101_FIFOTHR 0х47, CC1101_TEST2 0х81, CC1101_TEST1 0х35
    //{ CC1101_MDMCFG4, 0xC7 },     //ширина диапазона фильтра канала 101кГц изменить CC1101_FIFOTHR 0х47, CC1101_TEST2 0х81, CC1101_TEST1 0х35
    { CC1101_MDMCFG3, 0x32 },       //Мантисса пользовательской скорости символов

    //настройка модуляции 
    { CC1101_MDMCFG2, 0x30 },       //<---OOK/ASK без преамбулы, без манчестерского кодирования

    { CC1101_MDMCFG1, 0x23 },
    { CC1101_MDMCFG0, 0xF8 },

    { CC1101_MCSM0, 0x18 },         //Конфигурация конечного автомата управления радио
    
    { CC1101_FOCCFG, 0x18 },

    //настройки АРУ
    { CC1101_AGCTRL2, 0x07 },       // MAGN_TARGET для фильтра RX BW = <100 кГц составляет 0x3. Для более высокого фильтра RX MAGN_TARGET BW равен 0x7.
    { CC1101_AGCTRL1, 0x00 },
    { CC1101_AGCTRL0, 0x91 },
    // { CC1101_AGCTRL2, 0x03 },
    // { CC1101_AGCTRL1, 0x00 },
    // { CC1101_AGCTRL0, 0x40 },
    // { CC1101_AGCTRL2, 0x07 },
    // { CC1101_AGCTRL1, 0x47 },
    // { CC1101_AGCTRL0, 0x91 },

    { CC1101_WORCTRL, 0xFB },

    //настройка RX тракта FREND1 зависит от полосы пропускания фильтра RX: 0xB6, если полоса фильтра RX> 100 кГц, иначе 0x56
    //{ CC1101_FREND1, 0x56 },
    { CC1101_FREND1, 0xB6 },

    //настрйока TX тракта
    { CC1101_FREND0,   0x11 },
    //{ CC1101_FREND0, 0x01 },

    //Калибровка синтезатора частоты
    { CC1101_FSCAL3, 0xE9 },
    { CC1101_FSCAL2, 0x2A },
    { CC1101_FSCAL1, 0x00 },
    { CC1101_FSCAL0, 0x1F },
    
    //Если вы используете TEST2 = 0x81, TEST1 = 0x35 (применимо, если фильтр RX <325 кГц),
    // обязательно установите FIFOTHR [6] = 1; иначе TEST2 = 0x88, TEST1 = 0x31 и FIFOTHR [6] = 0
    { CC1101_TEST2, 0x81 },
    { CC1101_TEST1, 0x35 },
    { CC1101_TEST0, 0x09 },

    /* End  */
    { 0, 0 },
};

static const uint8_t api_hal_subghz_preset_mp_patable[8] = {
    0x00,
    0xC0, // 10dBm 0xC0, 7dBm 0xC8, 5dBm 0x84, 0dBm 0x60, -10dBm 0x34, -15dBm 0x1D, -20dBm 0x0E, -30dBm 0x12
    0x00,
    0x00,
    0x00,
    0x00,
    0x00,
    0x00
};

static const uint8_t api_hal_subghz_preset_2fsk_packet_regs[][2] = {
    /* Base setting */
    { CC1101_IOCFG0,    0x06 }, // GD0 as async serial data output/input
    { CC1101_MCSM0,     0x18 }, // Autocalibrate on idle to TRX, ~150us OSC guard time

    /* Magic */
    { CC1101_TEST2,     0x81},
    { CC1101_TEST1,     0x35},
    { CC1101_TEST0,     0x09},

    /* End */
    { 0, 0 },
};

static const uint8_t api_hal_subghz_preset_2fsk_packet_patable[8] = {
    0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};

void api_hal_subghz_init() {
    furi_assert(api_hal_subghz_state == SubGhzStateInit);
    api_hal_subghz_state = SubGhzStateIdle;

    const ApiHalSpiDevice* device = api_hal_spi_device_get(ApiHalSpiDeviceIdSubGhz);

#ifdef API_HAL_SUBGHZ_TX_GPIO
    hal_gpio_init(&API_HAL_SUBGHZ_TX_GPIO, GpioModeOutputPushPull, GpioPullNo, GpioSpeedLow);
#endif

    // Reset
    hal_gpio_init(&gpio_cc1101_g0, GpioModeAnalog, GpioPullNo, GpioSpeedLow);
    cc1101_reset(device);
    cc1101_write_reg(device, CC1101_IOCFG0, CC1101IocfgHighImpedance);

    // Prepare GD0 for power on self test
    hal_gpio_init(&gpio_cc1101_g0, GpioModeInput, GpioPullNo, GpioSpeedLow);

    // GD0 low
    cc1101_write_reg(device, CC1101_IOCFG0, CC1101IocfgHW);
    while(hal_gpio_read(&gpio_cc1101_g0) != false);

    // GD0 high
    cc1101_write_reg(device, CC1101_IOCFG0, CC1101IocfgHW | CC1101_IOCFG_INV);
    while(hal_gpio_read(&gpio_cc1101_g0) != true);

    // Reset GD0 to floating state
    cc1101_write_reg(device, CC1101_IOCFG0, CC1101IocfgHighImpedance);
    hal_gpio_init(&gpio_cc1101_g0, GpioModeAnalog, GpioPullNo, GpioSpeedLow);

    // RF switches
    hal_gpio_init(&gpio_rf_sw_0, GpioModeOutputPushPull, GpioPullNo, GpioSpeedLow);
    cc1101_write_reg(device, CC1101_IOCFG2, CC1101IocfgHW);

    // Go to sleep
    cc1101_shutdown(device);

    api_hal_spi_device_return(device);
}

void api_hal_subghz_sleep() {
    furi_assert(api_hal_subghz_state == SubGhzStateIdle);
    const ApiHalSpiDevice* device = api_hal_spi_device_get(ApiHalSpiDeviceIdSubGhz);

    cc1101_switch_to_idle(device);

    cc1101_write_reg(device, CC1101_IOCFG0, CC1101IocfgHighImpedance);
    hal_gpio_init(&gpio_cc1101_g0, GpioModeAnalog, GpioPullNo, GpioSpeedLow);

    cc1101_shutdown(device);

    api_hal_spi_device_return(device);
}

void api_hal_subghz_dump_state() {
    const ApiHalSpiDevice* device = api_hal_spi_device_get(ApiHalSpiDeviceIdSubGhz);
    printf(
        "[api_hal_subghz] cc1101 chip %d, version %d\r\n",
        cc1101_get_partnumber(device),
        cc1101_get_version(device)
    );
    api_hal_spi_device_return(device);
}

void api_hal_subghz_load_preset(ApiHalSubGhzPreset preset) {
    if(preset == ApiHalSubGhzPresetOokAsync) {
        api_hal_subghz_load_registers(api_hal_subghz_preset_ook_async_regs);
        api_hal_subghz_load_patable(api_hal_subghz_preset_ook_async_patable);
    } else if(preset == ApiHalSubGhzPreset2FskPacket) {
        api_hal_subghz_load_registers(api_hal_subghz_preset_2fsk_packet_regs);
        api_hal_subghz_load_patable(api_hal_subghz_preset_2fsk_packet_patable);
    } else if(preset == ApiHalSubGhzPresetMP) {
        api_hal_subghz_load_registers(api_hal_subghz_preset_mp_regs);
        api_hal_subghz_load_patable(api_hal_subghz_preset_mp_patable);
    }
}

uint8_t api_hal_subghz_get_status() {
    const ApiHalSpiDevice* device = api_hal_spi_device_get(ApiHalSpiDeviceIdSubGhz);
    CC1101StatusRaw st;
    st.status = cc1101_get_status(device);
    api_hal_spi_device_return(device);
    return st.status_raw;
}

void api_hal_subghz_load_registers(const uint8_t data[][2]) {
    const ApiHalSpiDevice* device = api_hal_spi_device_get(ApiHalSpiDeviceIdSubGhz);
    cc1101_reset(device);
    uint32_t i = 0;
    while (data[i][0]) {
        cc1101_write_reg(device, data[i][0], data[i][1]);
        i++;
    }
    api_hal_spi_device_return(device);
}

void api_hal_subghz_load_patable(const uint8_t data[8]) {
    const ApiHalSpiDevice* device = api_hal_spi_device_get(ApiHalSpiDeviceIdSubGhz);
    cc1101_set_pa_table(device, data);
    api_hal_spi_device_return(device);
}

void api_hal_subghz_write_packet(const uint8_t* data, uint8_t size) {
    const ApiHalSpiDevice* device = api_hal_spi_device_get(ApiHalSpiDeviceIdSubGhz);
    cc1101_flush_tx(device);
    cc1101_write_fifo(device, data, size);
    api_hal_spi_device_return(device);
}

void api_hal_subghz_flush_rx() {
    const ApiHalSpiDevice* device = api_hal_spi_device_get(ApiHalSpiDeviceIdSubGhz);
    cc1101_flush_rx(device);
    api_hal_spi_device_return(device);
}

void api_hal_subghz_read_packet(uint8_t* data, uint8_t* size) {
    const ApiHalSpiDevice* device = api_hal_spi_device_get(ApiHalSpiDeviceIdSubGhz);
    cc1101_read_fifo(device, data, size);
    api_hal_spi_device_return(device);
}

void api_hal_subghz_shutdown() {
    const ApiHalSpiDevice* device = api_hal_spi_device_get(ApiHalSpiDeviceIdSubGhz);
    // Reset and shutdown
    cc1101_shutdown(device);
    api_hal_spi_device_return(device);
}

void api_hal_subghz_reset() {
    const ApiHalSpiDevice* device = api_hal_spi_device_get(ApiHalSpiDeviceIdSubGhz);
    hal_gpio_init(&gpio_cc1101_g0, GpioModeAnalog, GpioPullNo, GpioSpeedLow);
    cc1101_switch_to_idle(device);
    cc1101_reset(device);
    cc1101_write_reg(device, CC1101_IOCFG0, CC1101IocfgHighImpedance);
    api_hal_spi_device_return(device);
}

void api_hal_subghz_idle() {
    const ApiHalSpiDevice* device = api_hal_spi_device_get(ApiHalSpiDeviceIdSubGhz);
    cc1101_switch_to_idle(device);
    api_hal_spi_device_return(device);
}

void api_hal_subghz_rx() {
    const ApiHalSpiDevice* device = api_hal_spi_device_get(ApiHalSpiDeviceIdSubGhz);
    cc1101_switch_to_rx(device);
    api_hal_spi_device_return(device);
}

void api_hal_subghz_tx() {
    const ApiHalSpiDevice* device = api_hal_spi_device_get(ApiHalSpiDeviceIdSubGhz);
    cc1101_switch_to_tx(device);
    api_hal_spi_device_return(device);
}

float api_hal_subghz_get_rssi() {
    const ApiHalSpiDevice* device = api_hal_spi_device_get(ApiHalSpiDeviceIdSubGhz);
    int32_t rssi_dec = cc1101_get_rssi(device);
    api_hal_spi_device_return(device);

    float rssi = rssi_dec;
    if(rssi_dec >= 128) {
        rssi = ((rssi - 256.0f) / 2.0f) - 74.0f;
    } else {
        rssi = (rssi / 2.0f) - 74.0f;
    }

    return rssi;
}

uint32_t api_hal_subghz_set_frequency_and_path(uint32_t value) {
    value = api_hal_subghz_set_frequency(value);
    if(value >= 300000000 && value <= 348000335) {
        api_hal_subghz_set_path(ApiHalSubGhzPath315);
    } else if(value >= 387000000 && value <= 464000000) {
        api_hal_subghz_set_path(ApiHalSubGhzPath433);
    } else if(value >= 779000000 && value <= 928000000) {
        api_hal_subghz_set_path(ApiHalSubGhzPath868);
    } else {
        furi_check(0);
    }
    return value;
}

uint32_t api_hal_subghz_set_frequency(uint32_t value) {
    const ApiHalSpiDevice* device = api_hal_spi_device_get(ApiHalSpiDeviceIdSubGhz);

    // Compensate rounding
    if (value % cc1101_get_frequency_step(device) > (cc1101_get_frequency_step(device) / 2)) {
        value += cc1101_get_frequency_step(device);
    }

    uint32_t real_frequency = cc1101_set_frequency(device, value);
    cc1101_calibrate(device);

    api_hal_spi_device_return(device);

    return real_frequency;
}

void api_hal_subghz_set_path(ApiHalSubGhzPath path) {
    const ApiHalSpiDevice* device = api_hal_spi_device_get(ApiHalSpiDeviceIdSubGhz);
    if (path == ApiHalSubGhzPath433) {
        hal_gpio_write(&gpio_rf_sw_0, 0);
        cc1101_write_reg(device, CC1101_IOCFG2, CC1101IocfgHW | CC1101_IOCFG_INV);
    } else if (path == ApiHalSubGhzPath315) {
        hal_gpio_write(&gpio_rf_sw_0, 1);
        cc1101_write_reg(device, CC1101_IOCFG2, CC1101IocfgHW);
    } else if (path == ApiHalSubGhzPath868) {
        hal_gpio_write(&gpio_rf_sw_0, 1);
        cc1101_write_reg(device, CC1101_IOCFG2, CC1101IocfgHW | CC1101_IOCFG_INV);
    } else if (path == ApiHalSubGhzPathIsolate) {
        hal_gpio_write(&gpio_rf_sw_0, 0);
        cc1101_write_reg(device, CC1101_IOCFG2, CC1101IocfgHW);
    } else {
        furi_check(0);
    }
    api_hal_spi_device_return(device);
}

volatile uint32_t api_hal_subghz_capture_delta_duration = 0;
volatile ApiHalSubGhzCaptureCallback api_hal_subghz_capture_callback = NULL;
volatile void* api_hal_subghz_capture_callback_context = NULL;

static void api_hal_subghz_capture_ISR() {
    // Channel 1
    if(LL_TIM_IsActiveFlag_CC1(TIM2)) {
        LL_TIM_ClearFlag_CC1(TIM2);
        api_hal_subghz_capture_delta_duration = LL_TIM_IC_GetCaptureCH1(TIM2);
        if (api_hal_subghz_capture_callback) {
            api_hal_subghz_capture_callback(true, api_hal_subghz_capture_delta_duration,
                (void*)api_hal_subghz_capture_callback_context
            );
        }
    }
    // Channel 2
    if(LL_TIM_IsActiveFlag_CC2(TIM2)) {
        LL_TIM_ClearFlag_CC2(TIM2);
        if (api_hal_subghz_capture_callback) {
            api_hal_subghz_capture_callback(false, LL_TIM_IC_GetCaptureCH2(TIM2) - api_hal_subghz_capture_delta_duration,
                (void*)api_hal_subghz_capture_callback_context
            );
        }
    }
}

void api_hal_subghz_set_async_rx_callback(ApiHalSubGhzCaptureCallback callback, void* context) {
    api_hal_subghz_capture_callback = callback;
    api_hal_subghz_capture_callback_context = context;
}

void api_hal_subghz_start_async_rx() {
    furi_assert(api_hal_subghz_state == SubGhzStateIdle);
    api_hal_subghz_state = SubGhzStateAsyncRx;

    hal_gpio_init_ex(&gpio_cc1101_g0, GpioModeAltFunctionPushPull, GpioPullNo, GpioSpeedLow, GpioAltFn1TIM2);

    // Timer: base
    LL_TIM_InitTypeDef TIM_InitStruct = {0};
    TIM_InitStruct.Prescaler = 64-1; 
    TIM_InitStruct.CounterMode = LL_TIM_COUNTERMODE_UP;
    TIM_InitStruct.Autoreload = 0x7FFFFFFE;
    TIM_InitStruct.ClockDivision = LL_TIM_CLOCKDIVISION_DIV1;
    LL_TIM_Init(TIM2, &TIM_InitStruct);

    // Timer: advanced
    LL_TIM_SetClockSource(TIM2, LL_TIM_CLOCKSOURCE_INTERNAL);
    LL_TIM_DisableARRPreload(TIM2);
    LL_TIM_SetTriggerInput(TIM2, LL_TIM_TS_TI2FP2);
    LL_TIM_SetSlaveMode(TIM2, LL_TIM_SLAVEMODE_RESET);
    LL_TIM_SetTriggerOutput(TIM2, LL_TIM_TRGO_RESET);
    LL_TIM_EnableMasterSlaveMode(TIM2);
    LL_TIM_DisableDMAReq_TRIG(TIM2);
    LL_TIM_DisableIT_TRIG(TIM2);

    // Timer: channel 1 indirect
    LL_TIM_IC_SetActiveInput(TIM2, LL_TIM_CHANNEL_CH1, LL_TIM_ACTIVEINPUT_INDIRECTTI);
    LL_TIM_IC_SetPrescaler(TIM2, LL_TIM_CHANNEL_CH1, LL_TIM_ICPSC_DIV1);
    LL_TIM_IC_SetPolarity(TIM2, LL_TIM_CHANNEL_CH1, LL_TIM_IC_POLARITY_FALLING);
    LL_TIM_IC_SetFilter(TIM2, LL_TIM_CHANNEL_CH1, LL_TIM_IC_FILTER_FDIV1);

    // Timer: channel 2 direct
    LL_TIM_IC_SetActiveInput(TIM2, LL_TIM_CHANNEL_CH2, LL_TIM_ACTIVEINPUT_DIRECTTI);
    LL_TIM_IC_SetPrescaler(TIM2, LL_TIM_CHANNEL_CH2, LL_TIM_ICPSC_DIV1);
    LL_TIM_IC_SetPolarity(TIM2, LL_TIM_CHANNEL_CH2, LL_TIM_IC_POLARITY_RISING);
    LL_TIM_IC_SetFilter(TIM2, LL_TIM_CHANNEL_CH2, LL_TIM_IC_FILTER_FDIV1);

    // ISR setup
    api_hal_interrupt_set_timer_isr(TIM2, api_hal_subghz_capture_ISR);
    NVIC_SetPriority(TIM2_IRQn, NVIC_EncodePriority(NVIC_GetPriorityGrouping(),5, 0));
    NVIC_EnableIRQ(TIM2_IRQn);

    // Interrupts and channels
    LL_TIM_EnableIT_CC1(TIM2);
    LL_TIM_EnableIT_CC2(TIM2);
    LL_TIM_CC_EnableChannel(TIM2, LL_TIM_CHANNEL_CH1);
    LL_TIM_CC_EnableChannel(TIM2, LL_TIM_CHANNEL_CH2);

    // Start timer
    LL_TIM_SetCounter(TIM2, 0);
    LL_TIM_EnableCounter(TIM2);

    // Switch to RX
    api_hal_subghz_rx();
}

void api_hal_subghz_stop_async_rx() {
    furi_assert(api_hal_subghz_state == SubGhzStateAsyncRx);
    api_hal_subghz_state = SubGhzStateIdle;

    // Shutdown radio
    api_hal_subghz_idle();

    LL_TIM_DeInit(TIM2);
    api_hal_interrupt_set_timer_isr(TIM2, NULL);

    hal_gpio_init(&gpio_cc1101_g0, GpioModeAnalog, GpioPullNo, GpioSpeedLow);
}

volatile size_t api_hal_subghz_tx_repeat = 0;

static void api_hal_subghz_tx_dma_isr() {
    if (LL_DMA_IsActiveFlag_TC1(DMA1)) {
        LL_DMA_ClearFlag_TC1(DMA1);
        furi_assert(api_hal_subghz_state == SubGhzStateAsyncTx);
        if (--api_hal_subghz_tx_repeat == 0) {
            api_hal_subghz_state = SubGhzStateAsyncTxLast;
            LL_DMA_DisableChannel(DMA1, LL_DMA_CHANNEL_1);
        }
    }
}

static void api_hal_subghz_tx_timer_isr() {
    if(LL_TIM_IsActiveFlag_UPDATE(TIM2)) {
        LL_TIM_ClearFlag_UPDATE(TIM2);
        if (api_hal_subghz_state == SubGhzStateAsyncTxLast) {
            LL_TIM_DisableCounter(TIM2);
            api_hal_subghz_state = SubGhzStateAsyncTxEnd;
        }
    }
}

void api_hal_subghz_start_async_tx(uint32_t* buffer, size_t buffer_size, size_t repeat) {
    furi_assert(api_hal_subghz_state == SubGhzStateIdle);
    api_hal_subghz_state = SubGhzStateAsyncTx;
    api_hal_subghz_tx_repeat = repeat;

    // Connect CC1101_GD0 to TIM2 as output
    hal_gpio_init_ex(&gpio_cc1101_g0, GpioModeAltFunctionPushPull, GpioPullDown, GpioSpeedLow, GpioAltFn1TIM2);

    // Configure DMA
    LL_DMA_InitTypeDef dma_config = {0};
    dma_config.PeriphOrM2MSrcAddress = (uint32_t)&(TIM2->ARR);
    dma_config.MemoryOrM2MDstAddress = (uint32_t)buffer;
    dma_config.Direction = LL_DMA_DIRECTION_MEMORY_TO_PERIPH;
    dma_config.Mode = LL_DMA_MODE_CIRCULAR;
    dma_config.PeriphOrM2MSrcIncMode = LL_DMA_PERIPH_NOINCREMENT;
    dma_config.MemoryOrM2MDstIncMode = LL_DMA_MEMORY_INCREMENT;
    dma_config.PeriphOrM2MSrcDataSize = LL_DMA_PDATAALIGN_WORD;
    dma_config.MemoryOrM2MDstDataSize = LL_DMA_MDATAALIGN_WORD;
    dma_config.NbData = buffer_size / sizeof(uint32_t);
    dma_config.PeriphRequest = LL_DMAMUX_REQ_TIM2_UP;
    dma_config.Priority = LL_DMA_MODE_NORMAL;
    LL_DMA_Init(DMA1, LL_DMA_CHANNEL_1, &dma_config);
    api_hal_interrupt_set_dma_channel_isr(DMA1, LL_DMA_CHANNEL_1, api_hal_subghz_tx_dma_isr);
    LL_DMA_EnableIT_TC(DMA1, LL_DMA_CHANNEL_1);
    LL_DMA_EnableChannel(DMA1, LL_DMA_CHANNEL_1);

    // Configure TIM2
    LL_TIM_InitTypeDef TIM_InitStruct = {0};
    TIM_InitStruct.Prescaler = 64-1;
    TIM_InitStruct.CounterMode = LL_TIM_COUNTERMODE_UP;
    TIM_InitStruct.Autoreload = 1000;
    TIM_InitStruct.ClockDivision = LL_TIM_CLOCKDIVISION_DIV1;
    LL_TIM_Init(TIM2, &TIM_InitStruct);
    LL_TIM_SetClockSource(TIM2, LL_TIM_CLOCKSOURCE_INTERNAL);
    LL_TIM_EnableARRPreload(TIM2);

    // Configure TIM2 CH2
    LL_TIM_OC_InitTypeDef TIM_OC_InitStruct = {0};
    TIM_OC_InitStruct.OCMode = LL_TIM_OCMODE_TOGGLE;
    TIM_OC_InitStruct.OCState = LL_TIM_OCSTATE_DISABLE;
    TIM_OC_InitStruct.OCNState = LL_TIM_OCSTATE_DISABLE;
    TIM_OC_InitStruct.CompareValue = 0;
    TIM_OC_InitStruct.OCPolarity = LL_TIM_OCPOLARITY_HIGH;
    LL_TIM_OC_Init(TIM2, LL_TIM_CHANNEL_CH2, &TIM_OC_InitStruct);
    LL_TIM_OC_DisableFast(TIM2, LL_TIM_CHANNEL_CH2);
    LL_TIM_DisableMasterSlaveMode(TIM2);

    api_hal_interrupt_set_timer_isr(TIM2, api_hal_subghz_tx_timer_isr);
    LL_TIM_EnableIT_UPDATE(TIM2);
    LL_TIM_EnableDMAReq_UPDATE(TIM2);
    LL_TIM_CC_EnableChannel(TIM2, LL_TIM_CHANNEL_CH2);

    // Start counter
    LL_TIM_GenerateEvent_UPDATE(TIM2);
#ifdef API_HAL_SUBGHZ_TX_GPIO
    hal_gpio_write(&API_HAL_SUBGHZ_TX_GPIO, true);
#endif
    api_hal_subghz_tx();

    LL_TIM_SetCounter(TIM2, 0);
    LL_TIM_EnableCounter(TIM2);
}

void api_hal_subghz_wait_async_tx() {
    while(api_hal_subghz_state != SubGhzStateAsyncTxEnd) osDelay(1);
}

void api_hal_subghz_stop_async_tx() {
    furi_assert(api_hal_subghz_state == SubGhzStateAsyncTxEnd);
    api_hal_subghz_state = SubGhzStateIdle;

    // Shutdown radio
    api_hal_subghz_idle();
#ifdef API_HAL_SUBGHZ_TX_GPIO
    hal_gpio_write(&API_HAL_SUBGHZ_TX_GPIO, false);
#endif

    // Deinitialize Timer
    LL_TIM_DeInit(TIM2);
    api_hal_interrupt_set_timer_isr(TIM2, NULL);

    // Deinitialize DMA
    LL_DMA_DeInit(DMA1, LL_DMA_CHANNEL_1);
    api_hal_interrupt_set_dma_channel_isr(DMA1, LL_DMA_CHANNEL_1, NULL);

    // Deinitialize GPIO
    hal_gpio_init(&gpio_cc1101_g0, GpioModeAnalog, GpioPullNo, GpioSpeedLow);
}