liz/flipperzero-firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

[FL-2399, FL-2261] Tickless sleep shenanigans (#1168)

Browse Source 
* Disable USART in sleep
* Restore UART state on suspend/resume
* FuriHal: Enable stop mode and add insomnia to I2C and SPI
* Remove IDLE interrupt
* FuriHal: add FPU isr and disable all FPU interrupt, add core2 stop mode configuration on deep sleep
* FuriHal: tie stop mode debug with debug rtc flag
* FuriHal: adjust flash latency on clock switch, tie mcu debug with RTC debug flag
* FuriHal: move resource init to early stage
* Add EXTI pending check, enable debug traps with compile-time flag
* Wrap sleep debug functions in conditional compilation
* Remove erroneous changed
* Do not use CSS, remove it from everywhere
* Enable/disable USB on VBUS connect (prototype)
* FuriHal: add LPMS and DEEPSLEEP magic, workaround state inconsistency between cores
* FuriHal: honor c1 LMPS
* USB mode switch fix
* Applications: add flags and insomnia bypass system
* Correct spelling
* FuriHal: cleanup insomnia usage, reset sleep flags on wakeup, add shutdown api
* FuriHal: extra check on reinit request
* FuriHal: rename gpio_display_rst pin to gpio_display_rst_n
* FuriHal: add debug HAL
* FuriHal: add some magic to core2 reload procedure, fix issue with crash on ble keyboard exit
* FuriHal: cleanup ble glue, add BLE_GLUE_DEBUG flag
* FuriHal: ble reinit API, move os timer to LPTIM1 for deep sleep capability, shutdown that works
* FuriHal: take insomnia while shutdown
* Remove USB switch on/off on VBUS change
* Better tick skew handling
* Improve tick consistency under load
* Add USB_HP dummy IRQ handler
* Move interrupt check closer to sleep
* Clean up includes
* Re-enable Insomnia globally
* FuriHal: enable CSS
* FuriHal: remove questionable core2 clock shenanigans
* FuriHal: use core1 RCC registers in idle timer config
* FuriHal: return back CSS handlers, add lptim isr dispatching

Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
Co-authored-by: nminaylov <nm29719@gmail.com>
This commit is contained in:
Georgii Surkov
2022-04-29 16:29:51 +03:00
committed by GitHub
parent 73477cceed
commit 01434265f6
36 changed files with 710 additions and 302 deletions
Download Patch File Download Diff File Expand all files Collapse all files

39
firmware/targets/f7/furi_hal/furi_hal_resources.c
View File

@@ -1,6 +1,9 @@
#include <furi_hal_resources.h>
#include <furi.h>
#include <stm32wbxx_ll_rcc.h>
#include <stm32wbxx_ll_pwr.h>
const GpioPin vibro_gpio = {.port = VIBRO_GPIO_Port, .pin = VIBRO_Pin};
const GpioPin ibutton_gpio = {.port = iBTN_GPIO_Port, .pin = iBTN_Pin};
@@ -9,7 +12,7 @@ const GpioPin gpio_rf_sw_0 = {.port = RF_SW_0_GPIO_Port, .pin = RF_SW_0_Pin};
const GpioPin gpio_subghz_cs = {.port = CC1101_CS_GPIO_Port, .pin = CC1101_CS_Pin};
const GpioPin gpio_display_cs = {.port = DISPLAY_CS_GPIO_Port, .pin = DISPLAY_CS_Pin};
const GpioPin gpio_display_rst = {.port = DISPLAY_RST_GPIO_Port, .pin = DISPLAY_RST_Pin};
const GpioPin gpio_display_rst_n = {.port = DISPLAY_RST_GPIO_Port, .pin = DISPLAY_RST_Pin};
const GpioPin gpio_display_di = {.port = DISPLAY_DI_GPIO_Port, .pin = DISPLAY_DI_Pin};
const GpioPin gpio_sdcard_cs = {.port = SD_CS_GPIO_Port, .pin = SD_CS_Pin};
const GpioPin gpio_sdcard_cd = {.port = SD_CD_GPIO_Port, .pin = SD_CD_Pin};
@@ -72,14 +75,32 @@ const size_t input_pins_count = sizeof(input_pins) / sizeof(InputPin);
void furi_hal_resources_init_early() {
furi_hal_gpio_init(&gpio_button_left, GpioModeInput, GpioPullUp, GpioSpeedLow);
furi_hal_gpio_init_simple(&gpio_display_rst, GpioModeOutputPushPull);
// Display pins
furi_hal_gpio_write(&gpio_display_rst_n, 1);
furi_hal_gpio_init_simple(&gpio_display_rst_n, GpioModeOutputPushPull);
furi_hal_gpio_init_simple(&gpio_display_di, GpioModeOutputPushPull);
// Alternative pull configuration for shutdown
SET_BIT(PWR->PUCRB, DISPLAY_RST_Pin);
CLEAR_BIT(PWR->PDCRB, DISPLAY_RST_Pin);
SET_BIT(PWR->CR3, PWR_CR3_APC);
// Hard reset USB
furi_hal_gpio_init_simple(&gpio_usb_dm, GpioModeOutputOpenDrain);
furi_hal_gpio_init_simple(&gpio_usb_dp, GpioModeOutputOpenDrain);
furi_hal_gpio_write(&gpio_usb_dm, 0);
furi_hal_gpio_write(&gpio_usb_dp, 0);
// External header pins
furi_hal_gpio_init(&gpio_ext_pc0, GpioModeAnalog, GpioPullNo, GpioSpeedLow);
furi_hal_gpio_init(&gpio_ext_pc1, GpioModeAnalog, GpioPullNo, GpioSpeedLow);
furi_hal_gpio_init(&gpio_ext_pc3, GpioModeAnalog, GpioPullNo, GpioSpeedLow);
furi_hal_gpio_init(&gpio_ext_pb2, GpioModeAnalog, GpioPullNo, GpioSpeedLow);
furi_hal_gpio_init(&gpio_ext_pb3, GpioModeAnalog, GpioPullNo, GpioSpeedLow);
furi_hal_gpio_init(&gpio_ext_pa4, GpioModeAnalog, GpioPullNo, GpioSpeedLow);
furi_hal_gpio_init(&gpio_ext_pa6, GpioModeAnalog, GpioPullNo, GpioSpeedLow);
furi_hal_gpio_init(&gpio_ext_pa7, GpioModeAnalog, GpioPullNo, GpioSpeedLow);
}
void furi_hal_resources_deinit_early() {
@@ -92,19 +113,9 @@ void furi_hal_resources_init() {
input_pins[i].gpio, GpioModeInterruptRiseFall, GpioPullUp, GpioSpeedLow);
}
// External header pins
furi_hal_gpio_init(&gpio_ext_pc0, GpioModeAnalog, GpioPullNo, GpioSpeedLow);
furi_hal_gpio_init(&gpio_ext_pc1, GpioModeAnalog, GpioPullNo, GpioSpeedLow);
furi_hal_gpio_init(&gpio_ext_pc3, GpioModeAnalog, GpioPullNo, GpioSpeedLow);
furi_hal_gpio_init(&gpio_ext_pb2, GpioModeAnalog, GpioPullNo, GpioSpeedLow);
furi_hal_gpio_init(&gpio_ext_pb3, GpioModeAnalog, GpioPullNo, GpioSpeedLow);
furi_hal_gpio_init(&gpio_ext_pa4, GpioModeAnalog, GpioPullNo, GpioSpeedLow);
furi_hal_gpio_init(&gpio_ext_pa6, GpioModeAnalog, GpioPullNo, GpioSpeedLow);
furi_hal_gpio_init(&gpio_ext_pa7, GpioModeAnalog, GpioPullNo, GpioSpeedLow);
// Display pins
furi_hal_gpio_init(&gpio_display_rst, GpioModeOutputPushPull, GpioPullNo, GpioSpeedLow);
furi_hal_gpio_write(&gpio_display_rst, 0);
furi_hal_gpio_init(&gpio_display_rst_n, GpioModeOutputPushPull, GpioPullNo, GpioSpeedLow);
furi_hal_gpio_write(&gpio_display_rst_n, 0);
furi_hal_gpio_init(&gpio_display_di, GpioModeOutputPushPull, GpioPullNo, GpioSpeedLow);
furi_hal_gpio_write(&gpio_display_di, 0);