Rename api-hal to furi-hal (#629)

2021-08-08 21:03:25 +03:00
parent 7907cb232b
commit 0a97d6913c
192 changed files with 2276 additions and 2212 deletions
--- a/firmware/targets/f6/furi-hal/furi-hal-spi-config.c
+++ b/firmware/targets/f6/furi-hal/furi-hal-spi-config.c
@@ -0,0 +1,118 @@
+#include <furi-hal-spi-config.h>
+#include <furi-hal-resources.h>
+
+extern SPI_HandleTypeDef SPI_R;
+extern SPI_HandleTypeDef SPI_D;
+
+const SPI_InitTypeDef furi_hal_spi_config_nfc = {
+    .Mode = SPI_MODE_MASTER,
+    .Direction = SPI_DIRECTION_2LINES,
+    .DataSize = SPI_DATASIZE_8BIT,
+    .CLKPolarity = SPI_POLARITY_LOW,
+    .CLKPhase = SPI_PHASE_2EDGE,
+    .NSS = SPI_NSS_SOFT,
+    .BaudRatePrescaler = SPI_BAUDRATEPRESCALER_8,
+    .FirstBit = SPI_FIRSTBIT_MSB,
+    .TIMode = SPI_TIMODE_DISABLE,
+    .CRCCalculation = SPI_CRCCALCULATION_DISABLE,
+    .CRCPolynomial = 7,
+    .CRCLength = SPI_CRC_LENGTH_DATASIZE,
+    .NSSPMode = SPI_NSS_PULSE_DISABLE,
+};
+
+const SPI_InitTypeDef furi_hal_spi_config_subghz = {
+    .Mode = SPI_MODE_MASTER,
+    .Direction = SPI_DIRECTION_2LINES,
+    .DataSize = SPI_DATASIZE_8BIT,
+    .CLKPolarity = SPI_POLARITY_LOW,
+    .CLKPhase = SPI_PHASE_1EDGE,
+    .NSS = SPI_NSS_SOFT,
+    .BaudRatePrescaler = SPI_BAUDRATEPRESCALER_8,
+    .FirstBit = SPI_FIRSTBIT_MSB,
+    .TIMode = SPI_TIMODE_DISABLE,
+    .CRCCalculation = SPI_CRCCALCULATION_DISABLE,
+    .CRCPolynomial = 7,
+    .CRCLength = SPI_CRC_LENGTH_DATASIZE,
+    .NSSPMode = SPI_NSS_PULSE_DISABLE,
+};
+
+const SPI_InitTypeDef furi_hal_spi_config_display = {
+    .Mode = SPI_MODE_MASTER,
+    .Direction = SPI_DIRECTION_2LINES,
+    .DataSize = SPI_DATASIZE_8BIT,
+    .CLKPolarity = SPI_POLARITY_LOW,
+    .CLKPhase = SPI_PHASE_1EDGE,
+    .NSS = SPI_NSS_SOFT,
+    .BaudRatePrescaler = SPI_BAUDRATEPRESCALER_16,
+    .FirstBit = SPI_FIRSTBIT_MSB,
+    .TIMode = SPI_TIMODE_DISABLE,
+    .CRCCalculation = SPI_CRCCALCULATION_DISABLE,
+    .CRCPolynomial = 7,
+    .CRCLength = SPI_CRC_LENGTH_DATASIZE,
+    .NSSPMode = SPI_NSS_PULSE_ENABLE,
+};
+
+/**
+ * SD Card in fast mode (after init)
+ */
+const SPI_InitTypeDef furi_hal_spi_config_sd_fast = {
+    .Mode = SPI_MODE_MASTER,
+    .Direction = SPI_DIRECTION_2LINES,
+    .DataSize = SPI_DATASIZE_8BIT,
+    .CLKPolarity = SPI_POLARITY_LOW,
+    .CLKPhase = SPI_PHASE_1EDGE,
+    .NSS = SPI_NSS_SOFT,
+    .BaudRatePrescaler = SPI_BAUDRATEPRESCALER_2,
+    .FirstBit = SPI_FIRSTBIT_MSB,
+    .TIMode = SPI_TIMODE_DISABLE,
+    .CRCCalculation = SPI_CRCCALCULATION_DISABLE,
+    .CRCPolynomial = 7,
+    .CRCLength = SPI_CRC_LENGTH_DATASIZE,
+    .NSSPMode = SPI_NSS_PULSE_ENABLE,
+};
+
+/**
+ * SD Card in slow mode (before init)
+ */
+const SPI_InitTypeDef furi_hal_spi_config_sd_slow = {
+    .Mode = SPI_MODE_MASTER,
+    .Direction = SPI_DIRECTION_2LINES,
+    .DataSize = SPI_DATASIZE_8BIT,
+    .CLKPolarity = SPI_POLARITY_LOW,
+    .CLKPhase = SPI_PHASE_1EDGE,
+    .NSS = SPI_NSS_SOFT,
+    .BaudRatePrescaler = SPI_BAUDRATEPRESCALER_32,
+    .FirstBit = SPI_FIRSTBIT_MSB,
+    .TIMode = SPI_TIMODE_DISABLE,
+    .CRCCalculation = SPI_CRCCALCULATION_DISABLE,
+    .CRCPolynomial = 7,
+    .CRCLength = SPI_CRC_LENGTH_DATASIZE,
+    .NSSPMode = SPI_NSS_PULSE_ENABLE,
+};
+
+osMutexId_t spi_mutex_d = NULL;
+osMutexId_t spi_mutex_r = NULL;
+
+const FuriHalSpiBus spi_r = {
+    .spi=&SPI_R,
+    .mutex=&spi_mutex_r,
+    .miso=&gpio_spi_r_miso,
+    .mosi=&gpio_spi_r_mosi,
+    .clk=&gpio_spi_r_sck,
+};
+
+const FuriHalSpiBus spi_d = {
+    .spi=&SPI_D,
+    .mutex=&spi_mutex_d,
+    .miso=&gpio_spi_d_miso,
+    .mosi=&gpio_spi_d_mosi,
+    .clk=&gpio_spi_d_sck,
+};
+
+const FuriHalSpiDevice furi_hal_spi_devices[FuriHalSpiDeviceIdMax] = {
+    { .bus=&spi_r, .config=&furi_hal_spi_config_subghz, .chip_select=&gpio_subghz_cs, },
+    { .bus=&spi_d, .config=&furi_hal_spi_config_display, .chip_select=&gpio_display_cs, },
+    { .bus=&spi_d, .config=&furi_hal_spi_config_sd_fast, .chip_select=&gpio_sdcard_cs, },
+    { .bus=&spi_d, .config=&furi_hal_spi_config_sd_slow, .chip_select=&gpio_sdcard_cs, },
+    { .bus=&spi_r, .config=&furi_hal_spi_config_nfc, .chip_select=&gpio_nfc_cs },
+};