FuriHal: use proper divider for core2 when transition to sleep, remove extra stop mode transition checks, cleanup code. Furi: proper assert and check messages. (#2615)

firmware/targets/f7/ble_glue/ble_app.c

@@ -88,7 +88,7 @@ bool ble_app_init() {
             .min_tx_power = 0,
             .max_tx_power = 0,
             .rx_model_config = 1,
-            /* New stack (13.3->16.0)*/
+            /* New stack (13.3->15.0) */
             .max_adv_set_nbr = 1, // Only used if SHCI_C2_BLE_INIT_OPTIONS_EXT_ADV is set
             .max_adv_data_len = 31, // Only used if SHCI_C2_BLE_INIT_OPTIONS_EXT_ADV is set
             .tx_path_compens = 0, // RF TX Path Compensation, * 0.1 dB

firmware/targets/f7/furi_hal/furi_hal_bt.c

@@ -84,9 +84,7 @@ void furi_hal_bt_init() {
     }
 
     // Explicitly tell that we are in charge of CLK48 domain
-    if(!LL_HSEM_IsSemaphoreLocked(HSEM, CFG_HW_CLK48_CONFIG_SEMID)) {
     furi_check(LL_HSEM_1StepLock(HSEM, CFG_HW_CLK48_CONFIG_SEMID) == 0);
-    }
 
     // Start Core2
     ble_glue_init();
@@ -129,9 +127,7 @@ bool furi_hal_bt_start_radio_stack() {
     furi_mutex_acquire(furi_hal_bt_core2_mtx, FuriWaitForever);
 
     // Explicitly tell that we are in charge of CLK48 domain
-    if(!LL_HSEM_IsSemaphoreLocked(HSEM, CFG_HW_CLK48_CONFIG_SEMID)) {
     furi_check(LL_HSEM_1StepLock(HSEM, CFG_HW_CLK48_CONFIG_SEMID) == 0);
-    }
 
     do {
         // Wait until C2 is started or timeout

firmware/targets/f7/furi_hal/furi_hal_clock.c

@@ -213,7 +213,11 @@ void furi_hal_clock_switch_to_hsi() {
     while(LL_RCC_GetSysClkSource() != LL_RCC_SYS_CLKSOURCE_STATUS_HSI)
         ;
 
-    LL_FLASH_SetLatency(LL_FLASH_LATENCY_1);
+    LL_C2_RCC_SetAHBPrescaler(LL_RCC_SYSCLK_DIV_1);
+
+    LL_FLASH_SetLatency(LL_FLASH_LATENCY_0);
+    while(LL_FLASH_GetLatency() != LL_FLASH_LATENCY_0)
+        ;
 }
 
 void furi_hal_clock_switch_to_pll() {
@@ -228,7 +232,11 @@ void furi_hal_clock_switch_to_pll() {
     while(!LL_RCC_PLLSAI1_IsReady())
         ;
 
+    LL_C2_RCC_SetAHBPrescaler(LL_RCC_SYSCLK_DIV_2);
+
     LL_FLASH_SetLatency(LL_FLASH_LATENCY_3);
+    while(LL_FLASH_GetLatency() != LL_FLASH_LATENCY_3)
+        ;
 
     LL_RCC_SetSysClkSource(LL_RCC_SYS_CLKSOURCE_PLL);
     LL_RCC_SetSMPSClockSource(LL_RCC_SMPS_CLKSOURCE_HSE);

firmware/targets/f7/furi_hal/furi_hal_power.c

@@ -29,10 +29,6 @@
 #define FURI_HAL_POWER_DEBUG_STOP_GPIO (&gpio_ext_pc3)
 #endif
 
-#ifndef FURI_HAL_POWER_DEBUG_ABNORMAL_GPIO
-#define FURI_HAL_POWER_DEBUG_ABNORMAL_GPIO (&gpio_ext_pb3)
-#endif
-
 #ifndef FURI_HAL_POWER_STOP_MODE
 #define FURI_HAL_POWER_STOP_MODE (LL_PWR_MODE_STOP2)
 #endif
@@ -92,10 +88,8 @@ void furi_hal_power_init() {
 #ifdef FURI_HAL_POWER_DEBUG
     furi_hal_gpio_init_simple(FURI_HAL_POWER_DEBUG_WFI_GPIO, GpioModeOutputPushPull);
     furi_hal_gpio_init_simple(FURI_HAL_POWER_DEBUG_STOP_GPIO, GpioModeOutputPushPull);
-    furi_hal_gpio_init_simple(FURI_HAL_POWER_DEBUG_ABNORMAL_GPIO, GpioModeOutputPushPull);
     furi_hal_gpio_write(FURI_HAL_POWER_DEBUG_WFI_GPIO, 0);
     furi_hal_gpio_write(FURI_HAL_POWER_DEBUG_STOP_GPIO, 0);
-    furi_hal_gpio_write(FURI_HAL_POWER_DEBUG_ABNORMAL_GPIO, 0);
 #endif
 
     LL_PWR_SetRegulVoltageScaling(LL_PWR_REGU_VOLTAGE_SCALE1);
@@ -158,9 +152,7 @@ bool furi_hal_power_sleep_available() {
 
 static inline bool furi_hal_power_deep_sleep_available() {
     return furi_hal_bt_is_alive() && !furi_hal_rtc_is_flag_set(FuriHalRtcFlagLegacySleep) &&
-           !furi_hal_debug_is_gdb_session_active() && !LL_PWR_IsActiveFlag_CRPE() &&
+           !furi_hal_debug_is_gdb_session_active();
-           !LL_PWR_IsActiveFlag_CRP() && !LL_PWR_IsActiveFlag_BLEA() &&
-           !LL_PWR_IsActiveFlag_BLEWU();
 }
 
 static inline void furi_hal_power_light_sleep() {
@@ -211,16 +203,7 @@ static inline void furi_hal_power_deep_sleep() {
     __force_stores();
 #endif
 
-    bool should_abort_sleep = LL_PWR_IsActiveFlag_CRPE() || LL_PWR_IsActiveFlag_CRP() ||
-                              LL_PWR_IsActiveFlag_BLEA() || LL_PWR_IsActiveFlag_BLEWU();
-
-    if(should_abort_sleep) {
-#ifdef FURI_HAL_POWER_DEBUG
-        furi_hal_gpio_write(FURI_HAL_POWER_DEBUG_ABNORMAL_GPIO, 1);
-#endif
-    } else {
     __WFI();
-    }
 
     LL_LPM_EnableSleep();
 

furi/core/check.h

@@ -51,7 +51,7 @@ FURI_NORETURN void __furi_halt();
 #define furi_check(__e)                            \
     do {                                           \
         if(!(__e)) {                               \
-            furi_crash(__FURI_ASSERT_MESSAGE_FLAG); \
+            furi_crash(__FURI_CHECK_MESSAGE_FLAG); \
         }                                          \
     } while(0)
 
@@ -60,7 +60,7 @@ FURI_NORETURN void __furi_halt();
 #define furi_assert(__e)                            \
     do {                                            \
         if(!(__e)) {                                \
-            furi_crash(__FURI_CHECK_MESSAGE_FLAG); \
+            furi_crash(__FURI_ASSERT_MESSAGE_FLAG); \
         }                                           \
     } while(0)
 #else