Rename net names (#355)

* rename some pins
* back-port main.h to cube project
* regenerate code for gpio renaming
* update target
* fix subghz names

firmware/targets/f5/cube/f5.ioc

@@ -229,10 +229,11 @@ SPI1.Mode=SPI_MODE_MASTER
 Mcu.Pin39=PA13
 RCC.LCDFreq_Value=32768
 RCC.RNGFreq_Value=16000000
+PC2.GPIOParameters=GPIO_Label
 VP_ADC1_TempSens_Input.Signal=ADC1_TempSens_Input
 Mcu.Pin30=PE4
 NVIC.COMP_IRQn=true\:5\:0\:true\:false\:true\:false\:false\:true
-PA1.GPIO_Label=PA_SW_0
+PA1.GPIO_Label=RF_SW_0
 Mcu.Pin33=PB14
 Mcu.Pin34=PB15
 Mcu.Pin31=PB12
@@ -435,7 +436,7 @@ PA6.Signal=GPIO_Analog
 TIM2.Channel-Input_Capture2_from_TI1=TIM_CHANNEL_2
 RCC.EnbaleCSS=true
 ProjectManager.ToolChainLocation=
-PA2.GPIO_Label=PA_SW_1
+PA2.GPIO_Label=RF_SW_1
 RCC.LSI_VALUE=32000
 PB11.GPIO_ModeDefaultEXTI=GPIO_MODE_IT_RISING_FALLING
 PA15.Signal=GPIO_Input
@@ -451,6 +452,7 @@ SPI2.Direction=SPI_DIRECTION_2LINES
 PC5.Signal=SharedAnalog_PC5
 SPI1.BaudRatePrescaler=SPI_BAUDRATEPRESCALER_16
 OSC_IN.GPIO_Label=QUARTZ_32KHZ_IN
+PC2.GPIO_Label=SPI_D_MISO
 PC14-OSC32_IN.Locked=true
 PA12.GPIO_Speed=GPIO_SPEED_FREQ_VERY_HIGH
 COMP1.TriggerMode=COMP_TRIGGERMODE_IT_RISING_FALLING
@@ -468,7 +470,7 @@ SH.S_TIM2_CH1.1=TIM2_CH1,Input_Capture2_from_TI1
 SH.S_TIM2_CH1.0=TIM2_CH1,Input_Capture1_from_TI1
 PB8.GPIOParameters=GPIO_Label
 PB9.GPIO_Label=IR_TX
-PC10.GPIO_Label=PC10
+PC10.GPIO_Label=VIBRO
 PA10.Mode=I2C
 ProjectManager.NoMain=false
 SPI1.IPParameters=VirtualType,Mode,Direction,CalculateBaudRate,DataSize,CLKPhase,BaudRatePrescaler