Nfc: switch to HAL ticks. ApiHal: small cleanup and refactoring. (#609)

firmware/targets/f6/api-hal/api-hal-boot.c

@@ -1,5 +1,6 @@
 #include <api-hal-boot.h>
 #include <stm32wbxx_ll_rtc.h>
+#include <furi.h>
 
 // Boot request enum
 #define BOOT_REQUEST_TAINTED 0x00000000
@@ -10,6 +11,7 @@ void api_hal_boot_init() {
 #ifndef DEBUG
     LL_RTC_BAK_SetRegister(RTC, LL_RTC_BKP_DR0, BOOT_REQUEST_TAINTED);
 #endif
+    FURI_LOG_I("FuriHalBoot", "Init OK");
 }
 
 void api_hal_boot_set_mode(ApiHalBootMode mode) {

firmware/targets/f6/api-hal/api-hal-console.c

@@ -4,6 +4,8 @@
 #include <stm32wbxx_ll_gpio.h>
 #include <stm32wbxx_ll_usart.h>
 
+#include <furi.h>
+
 volatile bool api_hal_console_alive = false;
 
 void api_hal_console_init() {
@@ -34,6 +36,8 @@ void api_hal_console_init() {
 
     while(!LL_USART_IsActiveFlag_TEACK(USART1)) ;
     api_hal_console_alive = true;
+
+    FURI_LOG_I("FuriHalConsole", "Init OK");
 }
 
 void api_hal_console_tx(const uint8_t* buffer, size_t buffer_size) {

firmware/targets/f6/api-hal/api-hal-delay.c

@@ -10,6 +10,7 @@ void api_hal_delay_init(void) {
     DWT->CTRL |= DWT_CTRL_CYCCNTENA_Msk;
     DWT->CYCCNT = 0U;
     clk_per_microsecond = SystemCoreClock / 1000000.0f;
+    FURI_LOG_I("FuriHalDelay", "Init OK");
 }
 
 void delay_us(float microseconds) {

firmware/targets/f6/api-hal/api-hal-i2c.c

@@ -42,6 +42,7 @@ void api_hal_i2c_init() {
     LL_I2C_DisableOwnAddress2(POWER_I2C);
     LL_I2C_DisableGeneralCall(POWER_I2C);
     LL_I2C_EnableClockStretching(POWER_I2C);
+    FURI_LOG_I("FuriHalI2C", "Init OK");
 }
 
 bool api_hal_i2c_tx(

firmware/targets/f6/api-hal/api-hal-interrupt.c

@@ -14,6 +14,7 @@ volatile ApiHalInterruptISR api_hal_dma_channel_isr[API_HAL_INTERRUPT_DMA_COUNT]
 void api_hal_interrupt_init() {
     NVIC_SetPriority(DMA1_Channel1_IRQn, NVIC_EncodePriority(NVIC_GetPriorityGrouping(), 5, 0));
     NVIC_EnableIRQ(DMA1_Channel1_IRQn);
+    FURI_LOG_I("FuriHalInterrupt", "Init OK");
 }
 
 void api_hal_interrupt_set_timer_isr(TIM_TypeDef* timer, ApiHalInterruptISR isr) {

firmware/targets/f6/api-hal/api-hal-light.c

@@ -21,6 +21,7 @@ void api_hal_light_init() {
 
     lp5562_enable();
     lp5562_configure();
+    FURI_LOG_I("FuriHalLight", "Init OK");
 }
 
 void api_hal_light_set(Light light, uint8_t value) {

firmware/targets/f6/api-hal/api-hal-nfc.c

@@ -3,20 +3,18 @@
 
 static const uint32_t clocks_in_ms = 64 * 1000;
 
-ReturnCode api_hal_nfc_init() {
-    // Check if Nfc worker was started
-    rfalNfcState state = rfalNfcGetState();
-    if(state == RFAL_NFC_STATE_NOTINIT) {
-        return rfalNfcInitialize();
-    } else if(state == RFAL_NFC_STATE_IDLE) {
-        return ERR_NONE;
+void api_hal_nfc_init() {
+    ReturnCode ret = rfalNfcInitialize();
+    if(ret == ERR_NONE) {
+        api_hal_nfc_start_sleep();
+        FURI_LOG_I("FuriHalNfc", "Init OK");
     } else {
-        return ERR_BUSY;
+        FURI_LOG_W("FuriHalNfc", "Initialization failed, RFAL returned: %d", ret);
     }
 }
 
 bool api_hal_nfc_is_busy() {
-    return rfalNfcGetState() > RFAL_NFC_STATE_IDLE;
+    return rfalNfcGetState() != RFAL_NFC_STATE_IDLE;
 }
 
 void api_hal_nfc_field_on() {

firmware/targets/f6/api-hal/api-hal-os.c

@@ -3,8 +3,7 @@
 #include <api-hal-power.h>
 #include <stm32wbxx_ll_cortex.h>
 
-#include <FreeRTOS.h>
-#include <cmsis_os.h>
+#include <furi.h>
 
 #define API_HAL_OS_CLK_FREQUENCY 32768
 #define API_HAL_OS_TICK_PER_SECOND 1024
@@ -42,6 +41,8 @@ void api_hal_os_init() {
     osTimerId_t second_timer = osTimerNew(api_hal_os_timer_callback, osTimerPeriodic, NULL, NULL);
     osTimerStart(second_timer, 1024);
 #endif
+
+    FURI_LOG_I("FuriHalOs", "Init OK");
 }
 
 void LPTIM2_IRQHandler(void) {

firmware/targets/f6/api-hal/api-hal-power.c

@@ -13,6 +13,8 @@
 #include <bq27220.h>
 #include <bq25896.h>
 
+#include <furi.h>
+
 typedef struct {
     volatile uint32_t insomnia;
     volatile uint32_t deep_insomnia;
@@ -70,6 +72,7 @@ void api_hal_power_init() {
     LL_PWR_SMPS_SetMode(LL_PWR_SMPS_STEP_DOWN);
     bq27220_init(&cedv);
     bq25896_init();
+    FURI_LOG_I("FuriHalPower", "Init OK");
 }
 
 uint16_t api_hal_power_insomnia_level() {

firmware/targets/f6/api-hal/api-hal-spi.c

@@ -22,6 +22,7 @@ void api_hal_spi_init() {
             GpioSpeedVeryHigh
         );
     }
+    FURI_LOG_I("FuriHalSpi", "Init OK");
 }
 
 void api_hal_spi_bus_lock(const ApiHalSpiBus* bus) {

firmware/targets/f6/api-hal/api-hal-subghz.c

@@ -114,6 +114,7 @@ void api_hal_subghz_init() {
     cc1101_shutdown(device);
 
     api_hal_spi_device_return(device);
+    FURI_LOG_I("FuriHalSubGhz", "Init OK");
 }
 
 void api_hal_subghz_sleep() {

firmware/targets/f6/api-hal/api-hal-vcp.c

@@ -29,6 +29,7 @@ void api_hal_vcp_init() {
     api_hal_vcp->tx_semaphore = osSemaphoreNew(1, 1, NULL);
     api_hal_vcp->alive = false;
     api_hal_vcp->underrun = false;
+    FURI_LOG_I("FuriHalVcp", "Init OK");
 }
 
 void _api_hal_vcp_init() {

firmware/targets/f6/api-hal/api-hal-version.c

@@ -165,6 +165,7 @@ void api_hal_version_init() {
         break;
         default: furi_check(0);
     }
+    FURI_LOG_I("FuriHalVersion", "Init OK");
 }
 
 bool api_hal_version_do_i_belong_here() {

firmware/targets/f6/api-hal/api-hal-vibro.c

@@ -4,6 +4,8 @@
 void api_hal_vibro_init() {
     hal_gpio_init(&vibro_gpio, GpioModeOutputPushPull, GpioPullNo, GpioSpeedLow);
     hal_gpio_write(&vibro_gpio, false);
+    FURI_LOG_I("FuriHalVibro", "Init OK");
+
 }
 
 void api_hal_vibro_on(bool value) {

firmware/targets/f6/api-hal/api-hal.c

@@ -16,11 +16,8 @@
 void api_hal_init() {
     api_hal_clock_init();
     api_hal_console_init();
-    FURI_LOG_I("FURI_HAL", "CLOCK and CONSOLE OK");
     api_hal_interrupt_init();
-    FURI_LOG_I("FURI_HAL", "INTERRUPT OK");
     api_hal_delay_init();
-    FURI_LOG_I("FURI_HAL", "DELAY OK");
 
     MX_GPIO_Init();
     FURI_LOG_I("HAL", "GPIO OK");
@@ -28,9 +25,7 @@ void api_hal_init() {
     MX_RTC_Init();
     FURI_LOG_I("HAL", "RTC OK");
     api_hal_boot_init();
-    FURI_LOG_I("FURI_HAL", "BOOT OK");
     api_hal_version_init();
-    FURI_LOG_I("FURI_HAL", "VERSION OK");
     
     MX_ADC1_Init();
     FURI_LOG_I("HAL", "ADC1 OK");
@@ -40,7 +35,6 @@ void api_hal_init() {
     MX_SPI2_Init();
     FURI_LOG_I("HAL", "SPI2 OK");
     api_hal_spi_init();
-    FURI_LOG_I("FURI_HAL", "SPI OK");
 
     MX_TIM1_Init();
     FURI_LOG_I("HAL", "TIM1 OK");
@@ -65,24 +59,18 @@ void api_hal_init() {
 
     // VCP + USB
     api_hal_vcp_init();
-    FURI_LOG_I("FURI_HAL", "VCP OK");
     MX_USB_Device_Init();
     FURI_LOG_I("HAL", "USB OK");
 
     api_hal_i2c_init();
-    FURI_LOG_I("FURI_HAL", "I2C OK");
 
     // High Level
     api_hal_power_init();
-    FURI_LOG_I("FURI_HAL", "POWER OK");
     api_hal_light_init();
-    FURI_LOG_I("FURI_HAL", "LIGHT OK");
     api_hal_vibro_init();
-    FURI_LOG_I("FURI_HAL", "VIBRO OK");
     api_hal_subghz_init();
-    FURI_LOG_I("FURI_HAL", "SUBGHZ OK");
+    api_hal_nfc_init();
 
     // FreeRTOS glue
     api_hal_os_init();
-    FURI_LOG_I("FURI_HAL", "OS OK");
 }