HAL to LL migration: GPIO, HSEM, AES (#1069)
* gpio, hsem, crypto: switch from HAL to LL/registers * Moved GPIO initialization to furi_hal * More HAL removed * All HAL modules disabled * HAL is finally removed * hal_gpio -> furi_hal_gpio, main.h removed * Bootloader build fix * RTOS config moved to freertos-glue * delay -> furi_hal_delay Co-authored-by: あく <alleteam@gmail.com>
This commit is contained in:
Nikolay Minaylov
GitHub
@@ -1,138 +0,0 @@
|
||||
#pragma once
|
||||
|
||||
#if defined(__ICCARM__) || defined(__CC_ARM) || defined(__GNUC__)
|
||||
#include <stdint.h>
|
||||
extern uint32_t SystemCoreClock;
|
||||
#endif
|
||||
|
||||
#ifndef CMSIS_device_header
|
||||
#define CMSIS_device_header "stm32wbxx.h"
|
||||
#endif /* CMSIS_device_header */
|
||||
|
||||
#define configENABLE_FPU 1
|
||||
#define configENABLE_MPU 0
|
||||
|
||||
#define configUSE_PREEMPTION 1
|
||||
#define configSUPPORT_STATIC_ALLOCATION 0
|
||||
#define configSUPPORT_DYNAMIC_ALLOCATION 1
|
||||
#define configUSE_IDLE_HOOK 0
|
||||
#define configUSE_TICK_HOOK 0
|
||||
#define configCPU_CLOCK_HZ (SystemCoreClock)
|
||||
#define configTICK_RATE_HZ ((TickType_t)1024)
|
||||
#define configMAX_PRIORITIES (56)
|
||||
#define configMINIMAL_STACK_SIZE ((uint16_t)128)
|
||||
|
||||
/* Heap size determined automatically by linker */
|
||||
// #define configTOTAL_HEAP_SIZE ((size_t)0)
|
||||
#define configMAX_TASK_NAME_LEN (16)
|
||||
#define configGENERATE_RUN_TIME_STATS 0
|
||||
#define configUSE_TRACE_FACILITY 1
|
||||
#define configUSE_16_BIT_TICKS 0
|
||||
#define configUSE_MUTEXES 1
|
||||
#define configQUEUE_REGISTRY_SIZE 8
|
||||
#define configCHECK_FOR_STACK_OVERFLOW 1
|
||||
#define configUSE_RECURSIVE_MUTEXES 1
|
||||
#define configUSE_COUNTING_SEMAPHORES 1
|
||||
#define configENABLE_BACKWARD_COMPATIBILITY 0
|
||||
#define configUSE_PORT_OPTIMISED_TASK_SELECTION 0
|
||||
#define configUSE_TICKLESS_IDLE 2
|
||||
#define configRECORD_STACK_HIGH_ADDRESS 1
|
||||
#define configUSE_NEWLIB_REENTRANT 0
|
||||
|
||||
/* Defaults to size_t for backward compatibility, but can be changed
|
||||
if lengths will always be less than the number of bytes in a size_t. */
|
||||
#define configMESSAGE_BUFFER_LENGTH_TYPE size_t
|
||||
#define configNUM_THREAD_LOCAL_STORAGE_POINTERS 1
|
||||
#define configEXPECTED_IDLE_TIME_BEFORE_SLEEP 4
|
||||
|
||||
/* Co-routine definitions. */
|
||||
#define configUSE_CO_ROUTINES 0
|
||||
|
||||
/* Software timer definitions. */
|
||||
#define configUSE_TIMERS 1
|
||||
#define configTIMER_TASK_PRIORITY (2)
|
||||
#define configTIMER_QUEUE_LENGTH 32
|
||||
#define configTIMER_TASK_STACK_DEPTH 256
|
||||
#define configTIMER_SERVICE_TASK_NAME "TimersSrv"
|
||||
|
||||
#define configIDLE_TASK_NAME "(-_-)"
|
||||
|
||||
/* Set the following definitions to 1 to include the API function, or zero
|
||||
to exclude the API function. */
|
||||
#define INCLUDE_xTaskGetHandle 1
|
||||
#define INCLUDE_eTaskGetState 1
|
||||
#define INCLUDE_uxTaskGetStackHighWaterMark 1
|
||||
#define INCLUDE_uxTaskPriorityGet 1
|
||||
#define INCLUDE_vTaskCleanUpResources 0
|
||||
#define INCLUDE_vTaskDelay 1
|
||||
#define INCLUDE_vTaskDelayUntil 1
|
||||
#define INCLUDE_vTaskDelete 1
|
||||
#define INCLUDE_vTaskPrioritySet 1
|
||||
#define INCLUDE_vTaskSuspend 1
|
||||
#define INCLUDE_xQueueGetMutexHolder 1
|
||||
#define INCLUDE_xTaskGetCurrentTaskHandle 1
|
||||
#define INCLUDE_xTaskGetSchedulerState 1
|
||||
#define INCLUDE_xTimerPendFunctionCall 1
|
||||
|
||||
/* CMSIS-RTOS V2 flags */
|
||||
#define configUSE_OS2_THREAD_SUSPEND_RESUME 1
|
||||
#define configUSE_OS2_THREAD_ENUMERATE 1
|
||||
#define configUSE_OS2_EVENTFLAGS_FROM_ISR 1
|
||||
#define configUSE_OS2_THREAD_FLAGS 1
|
||||
#define configUSE_OS2_TIMER 1
|
||||
#define configUSE_OS2_MUTEX 1
|
||||
|
||||
/* CMSIS-RTOS */
|
||||
#define configTASK_NOTIFICATION_ARRAY_ENTRIES 2
|
||||
#define CMSIS_TASK_NOTIFY_INDEX 1
|
||||
|
||||
/*
|
||||
* The CMSIS-RTOS V2 FreeRTOS wrapper is dependent on the heap implementation used
|
||||
* by the application thus the correct define need to be enabled below
|
||||
*/
|
||||
#define USE_FreeRTOS_HEAP_4
|
||||
|
||||
/* Cortex-M specific definitions. */
|
||||
#ifdef __NVIC_PRIO_BITS
|
||||
/* __BVIC_PRIO_BITS will be specified when CMSIS is being used. */
|
||||
#define configPRIO_BITS __NVIC_PRIO_BITS
|
||||
#else
|
||||
#define configPRIO_BITS 4
|
||||
#endif
|
||||
|
||||
/* The lowest interrupt priority that can be used in a call to a "set priority"
|
||||
function. */
|
||||
#define configLIBRARY_LOWEST_INTERRUPT_PRIORITY 15
|
||||
|
||||
/* The highest interrupt priority that can be used by any interrupt service
|
||||
routine that makes calls to interrupt safe FreeRTOS API functions. DO NOT CALL
|
||||
INTERRUPT SAFE FREERTOS API FUNCTIONS FROM ANY INTERRUPT THAT HAS A HIGHER
|
||||
PRIORITY THAN THIS! (higher priorities are lower numeric values. */
|
||||
#define configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY 5
|
||||
|
||||
/* Interrupt priorities used by the kernel port layer itself. These are generic
|
||||
to all Cortex-M ports, and do not rely on any particular library functions. */
|
||||
#define configKERNEL_INTERRUPT_PRIORITY \
|
||||
(configLIBRARY_LOWEST_INTERRUPT_PRIORITY << (8 - configPRIO_BITS))
|
||||
|
||||
/* !!!! configMAX_SYSCALL_INTERRUPT_PRIORITY must not be set to zero !!!!
|
||||
See http://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html. */
|
||||
#define configMAX_SYSCALL_INTERRUPT_PRIORITY \
|
||||
(configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY << (8 - configPRIO_BITS))
|
||||
|
||||
/* Normal assert() semantics without relying on the provision of an assert.h
|
||||
header file. */
|
||||
#include <furi/check.h>
|
||||
#define configASSERT(x) \
|
||||
if((x) == 0) { \
|
||||
furi_crash("FreeRTOS Assert"); \
|
||||
}
|
||||
|
||||
/* Definitions that map the FreeRTOS port interrupt handlers to their CMSIS
|
||||
standard names. */
|
||||
#define vPortSVCHandler SVC_Handler
|
||||
#define xPortPendSVHandler PendSV_Handler
|
||||
|
||||
#define USE_CUSTOM_SYSTICK_HANDLER_IMPLEMENTATION 1
|
||||
#define configOVERRIDE_DEFAULT_TICK_CONFIGURATION \
|
||||
1 /* required only for Keil but does not hurt otherwise */
|
||||
@@ -1,49 +0,0 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file gpio.h
|
||||
* @brief This file contains all the function prototypes for
|
||||
* the gpio.c file
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2021 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under Ultimate Liberty license
|
||||
* SLA0044, the "License"; You may not use this file except in compliance with
|
||||
* the License. You may obtain a copy of the License at:
|
||||
* www.st.com/SLA0044
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __GPIO_H__
|
||||
#define __GPIO_H__
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "main.h"
|
||||
|
||||
/* USER CODE BEGIN Includes */
|
||||
|
||||
/* USER CODE END Includes */
|
||||
|
||||
/* USER CODE BEGIN Private defines */
|
||||
|
||||
/* USER CODE END Private defines */
|
||||
|
||||
void MX_GPIO_Init(void);
|
||||
|
||||
/* USER CODE BEGIN Prototypes */
|
||||
|
||||
/* USER CODE END Prototypes */
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
#endif /*__ GPIO_H__ */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
@@ -1,120 +0,0 @@
|
||||
#pragma once
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
#include "stm32wbxx_hal.h"
|
||||
#include "stm32wbxx_ll_gpio.h"
|
||||
|
||||
void Error_Handler(void);
|
||||
|
||||
#define BUTTON_BACK_GPIO_Port GPIOC
|
||||
#define BUTTON_BACK_Pin LL_GPIO_PIN_13
|
||||
#define BUTTON_DOWN_GPIO_Port GPIOC
|
||||
#define BUTTON_DOWN_Pin LL_GPIO_PIN_6
|
||||
#define BUTTON_LEFT_GPIO_Port GPIOB
|
||||
#define BUTTON_LEFT_Pin LL_GPIO_PIN_11
|
||||
#define BUTTON_OK_GPIO_Port GPIOH
|
||||
#define BUTTON_OK_Pin LL_GPIO_PIN_3
|
||||
#define BUTTON_RIGHT_GPIO_Port GPIOB
|
||||
#define BUTTON_RIGHT_Pin LL_GPIO_PIN_12
|
||||
#define BUTTON_UP_GPIO_Port GPIOB
|
||||
#define BUTTON_UP_Pin LL_GPIO_PIN_10
|
||||
|
||||
#define CC1101_CS_GPIO_Port GPIOD
|
||||
#define CC1101_CS_Pin LL_GPIO_PIN_0
|
||||
#define CC1101_G0_GPIO_Port GPIOA
|
||||
#define CC1101_G0_Pin LL_GPIO_PIN_1
|
||||
|
||||
#define DISPLAY_CS_GPIO_Port GPIOC
|
||||
#define DISPLAY_CS_Pin LL_GPIO_PIN_11
|
||||
#define DISPLAY_DI_GPIO_Port GPIOB
|
||||
#define DISPLAY_DI_Pin LL_GPIO_PIN_1
|
||||
#define DISPLAY_RST_GPIO_Port GPIOB
|
||||
#define DISPLAY_RST_Pin LL_GPIO_PIN_0
|
||||
|
||||
#define IR_RX_GPIO_Port GPIOA
|
||||
#define IR_RX_Pin LL_GPIO_PIN_0
|
||||
#define IR_TX_GPIO_Port GPIOB
|
||||
#define IR_TX_Pin LL_GPIO_PIN_9
|
||||
|
||||
#define NFC_CS_GPIO_Port GPIOE
|
||||
#define NFC_CS_Pin LL_GPIO_PIN_4
|
||||
|
||||
#define PA4_GPIO_Port GPIOA
|
||||
#define PA4_Pin LL_GPIO_PIN_4
|
||||
#define PA6_GPIO_Port GPIOA
|
||||
#define PA6_Pin LL_GPIO_PIN_6
|
||||
#define PA7_GPIO_Port GPIOA
|
||||
#define PA7_Pin LL_GPIO_PIN_7
|
||||
#define PB2_GPIO_Port GPIOB
|
||||
#define PB2_Pin LL_GPIO_PIN_2
|
||||
#define PB3_GPIO_Port GPIOB
|
||||
#define PB3_Pin LL_GPIO_PIN_3
|
||||
#define PC0_GPIO_Port GPIOC
|
||||
#define PC0_Pin LL_GPIO_PIN_0
|
||||
#define PC1_GPIO_Port GPIOC
|
||||
#define PC1_Pin LL_GPIO_PIN_1
|
||||
#define PC3_GPIO_Port GPIOC
|
||||
#define PC3_Pin LL_GPIO_PIN_3
|
||||
|
||||
#define PERIPH_POWER_GPIO_Port GPIOA
|
||||
#define PERIPH_POWER_Pin LL_GPIO_PIN_3
|
||||
|
||||
#define QUARTZ_32MHZ_IN_GPIO_Port GPIOC
|
||||
#define QUARTZ_32MHZ_IN_Pin LL_GPIO_PIN_14
|
||||
#define QUARTZ_32MHZ_OUT_GPIO_Port GPIOC
|
||||
#define QUARTZ_32MHZ_OUT_Pin LL_GPIO_PIN_15
|
||||
|
||||
#define RFID_OUT_GPIO_Port GPIOB
|
||||
#define RFID_OUT_Pin LL_GPIO_PIN_13
|
||||
#define RFID_PULL_GPIO_Port GPIOA
|
||||
#define RFID_PULL_Pin LL_GPIO_PIN_2
|
||||
#define RFID_RF_IN_GPIO_Port GPIOC
|
||||
#define RFID_RF_IN_Pin LL_GPIO_PIN_5
|
||||
#define RFID_CARRIER_GPIO_Port GPIOA
|
||||
#define RFID_CARRIER_Pin LL_GPIO_PIN_15
|
||||
|
||||
#define RF_SW_0_GPIO_Port GPIOC
|
||||
#define RF_SW_0_Pin LL_GPIO_PIN_4
|
||||
|
||||
#define SD_CD_GPIO_Port GPIOC
|
||||
#define SD_CD_Pin LL_GPIO_PIN_10
|
||||
#define SD_CS_GPIO_Port GPIOC
|
||||
#define SD_CS_Pin LL_GPIO_PIN_12
|
||||
|
||||
#define SPEAKER_GPIO_Port GPIOB
|
||||
#define SPEAKER_Pin LL_GPIO_PIN_8
|
||||
|
||||
#define VIBRO_GPIO_Port GPIOA
|
||||
#define VIBRO_Pin LL_GPIO_PIN_8
|
||||
|
||||
#define iBTN_GPIO_Port GPIOB
|
||||
#define iBTN_Pin LL_GPIO_PIN_14
|
||||
|
||||
#define USART1_TX_Pin LL_GPIO_PIN_6
|
||||
#define USART1_TX_Port GPIOB
|
||||
#define USART1_RX_Pin LL_GPIO_PIN_7
|
||||
#define USART1_RX_Port GPIOB
|
||||
|
||||
#define SPI_D_MISO_GPIO_Port GPIOC
|
||||
#define SPI_D_MISO_Pin LL_GPIO_PIN_2
|
||||
#define SPI_D_MOSI_GPIO_Port GPIOB
|
||||
#define SPI_D_MOSI_Pin LL_GPIO_PIN_15
|
||||
#define SPI_D_SCK_GPIO_Port GPIOD
|
||||
#define SPI_D_SCK_Pin LL_GPIO_PIN_1
|
||||
|
||||
#define SPI_R_MISO_GPIO_Port GPIOB
|
||||
#define SPI_R_MISO_Pin LL_GPIO_PIN_4
|
||||
#define SPI_R_MOSI_GPIO_Port GPIOB
|
||||
#define SPI_R_MOSI_Pin LL_GPIO_PIN_5
|
||||
#define SPI_R_SCK_GPIO_Port GPIOA
|
||||
#define SPI_R_SCK_Pin LL_GPIO_PIN_5
|
||||
|
||||
#define NFC_IRQ_Pin RFID_PULL_Pin
|
||||
#define NFC_IRQ_GPIO_Port RFID_PULL_GPIO_Port
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
@@ -1,40 +0,0 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32_assert.h
|
||||
* @brief STM32 assert file.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2019 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32_ASSERT_H
|
||||
#define __STM32_ASSERT_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
#ifdef USE_FULL_ASSERT
|
||||
#define assert_param(expr) ((expr) ? (void)0U : assert_failed())
|
||||
void assert_failed();
|
||||
#else
|
||||
#define assert_param(expr) ((void)0U)
|
||||
#endif /* USE_FULL_ASSERT */
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __STM32_ASSERT_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
@@ -1,347 +0,0 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32wbxx_hal_conf.h
|
||||
* @author MCD Application Team
|
||||
* @brief HAL configuration file.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2019 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32WBxx_HAL_CONF_H
|
||||
#define __STM32WBxx_HAL_CONF_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
|
||||
/* ########################## Module Selection ############################## */
|
||||
/**
|
||||
* @brief This is the list of modules to be used in the HAL driver
|
||||
*/
|
||||
#define HAL_MODULE_ENABLED
|
||||
/*#define HAL_ADC_MODULE_ENABLED */
|
||||
#define HAL_CRYP_MODULE_ENABLED
|
||||
/*#define HAL_COMP_MODULE_ENABLED */
|
||||
/*#define HAL_CRC_MODULE_ENABLED */
|
||||
/*#define HAL_HSEM_MODULE_ENABLED */
|
||||
/*#define HAL_I2C_MODULE_ENABLED */
|
||||
/*#define HAL_IPCC_MODULE_ENABLED */
|
||||
/*#define HAL_IRDA_MODULE_ENABLED */
|
||||
/*#define HAL_IWDG_MODULE_ENABLED */
|
||||
/*#define HAL_LCD_MODULE_ENABLED */
|
||||
/*#define HAL_LPTIM_MODULE_ENABLED */
|
||||
#define HAL_PCD_MODULE_ENABLED
|
||||
#define HAL_PKA_MODULE_ENABLED
|
||||
/*#define HAL_QSPI_MODULE_ENABLED */
|
||||
#define HAL_RNG_MODULE_ENABLED
|
||||
/*#define HAL_RTC_MODULE_ENABLED */
|
||||
/*#define HAL_SAI_MODULE_ENABLED */
|
||||
/*#define HAL_SMBUS_MODULE_ENABLED */
|
||||
/*#define HAL_SMARTCARD_MODULE_ENABLED */
|
||||
/*#define HAL_SPI_MODULE_ENABLED */
|
||||
/*#define HAL_TIM_MODULE_ENABLED */
|
||||
/*#define HAL_TSC_MODULE_ENABLED */
|
||||
/*#define HAL_UART_MODULE_ENABLED */
|
||||
/*#define HAL_USART_MODULE_ENABLED */
|
||||
/*#define HAL_WWDG_MODULE_ENABLED */
|
||||
#define HAL_EXTI_MODULE_ENABLED
|
||||
#define HAL_CORTEX_MODULE_ENABLED
|
||||
#define HAL_DMA_MODULE_ENABLED
|
||||
#define HAL_FLASH_MODULE_ENABLED
|
||||
#define HAL_GPIO_MODULE_ENABLED
|
||||
#define HAL_PWR_MODULE_ENABLED
|
||||
#define HAL_RCC_MODULE_ENABLED
|
||||
|
||||
#define USE_HAL_ADC_REGISTER_CALLBACKS 0u
|
||||
#define USE_HAL_COMP_REGISTER_CALLBACKS 0u
|
||||
#define USE_HAL_CRYP_REGISTER_CALLBACKS 0u
|
||||
#define USE_HAL_I2C_REGISTER_CALLBACKS 0u
|
||||
#define USE_HAL_IRDA_REGISTER_CALLBACKS 0u
|
||||
#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0u
|
||||
#define USE_HAL_PCD_REGISTER_CALLBACKS 0u
|
||||
#define USE_HAL_PKA_REGISTER_CALLBACKS 0u
|
||||
#define USE_HAL_QSPI_REGISTER_CALLBACKS 0u
|
||||
#define USE_HAL_RNG_REGISTER_CALLBACKS 0u
|
||||
#define USE_HAL_RTC_REGISTER_CALLBACKS 0u
|
||||
#define USE_HAL_SAI_REGISTER_CALLBACKS 0u
|
||||
#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0u
|
||||
#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0u
|
||||
#define USE_HAL_SPI_REGISTER_CALLBACKS 0u
|
||||
#define USE_HAL_TIM_REGISTER_CALLBACKS 0u
|
||||
#define USE_HAL_TSC_REGISTER_CALLBACKS 0u
|
||||
#define USE_HAL_UART_REGISTER_CALLBACKS 0u
|
||||
#define USE_HAL_USART_REGISTER_CALLBACKS 0u
|
||||
#define USE_HAL_WWDG_REGISTER_CALLBACKS 0u
|
||||
|
||||
/* ########################## Oscillator Values adaptation ####################*/
|
||||
/**
|
||||
* @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
|
||||
* This value is used by the RCC HAL module to compute the system frequency
|
||||
* (when HSE is used as system clock source, directly or through the PLL).
|
||||
*/
|
||||
#if !defined(HSE_VALUE)
|
||||
#define HSE_VALUE 32000000U /*!< Value of the External oscillator in Hz */
|
||||
#endif /* HSE_VALUE */
|
||||
|
||||
#if !defined(HSE_STARTUP_TIMEOUT)
|
||||
#define HSE_STARTUP_TIMEOUT ((uint32_t)100) /*!< Time out for HSE start up, in ms */
|
||||
#endif /* HSE_STARTUP_TIMEOUT */
|
||||
|
||||
/**
|
||||
* @brief Internal Multiple Speed oscillator (MSI) default value.
|
||||
* This value is the default MSI range value after Reset.
|
||||
*/
|
||||
#if !defined(MSI_VALUE)
|
||||
#define MSI_VALUE ((uint32_t)4000000) /*!< Value of the Internal oscillator in Hz*/
|
||||
#endif /* MSI_VALUE */
|
||||
|
||||
/**
|
||||
* @brief Internal High Speed oscillator (HSI) value.
|
||||
* This value is used by the RCC HAL module to compute the system frequency
|
||||
* (when HSI is used as system clock source, directly or through the PLL).
|
||||
*/
|
||||
#if !defined(HSI_VALUE)
|
||||
#define HSI_VALUE 16000000U /*!< Value of the Internal oscillator in Hz*/
|
||||
#endif /* HSI_VALUE */
|
||||
|
||||
/**
|
||||
* @brief Internal Low Speed oscillator (LSI1) value.
|
||||
*/
|
||||
#if !defined(LSI1_VALUE)
|
||||
#define LSI1_VALUE ((uint32_t)32000) /*!< LSI1 Typical Value in Hz*/
|
||||
#endif /* LSI1_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz
|
||||
The real value may vary depending on the variations
|
||||
in voltage and temperature.*/
|
||||
/**
|
||||
* @brief Internal Low Speed oscillator (LSI2) value.
|
||||
*/
|
||||
#if !defined(LSI2_VALUE)
|
||||
#define LSI2_VALUE ((uint32_t)32000) /*!< LSI2 Typical Value in Hz*/
|
||||
#endif /* LSI2_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz
|
||||
The real value may vary depending on the variations
|
||||
in voltage and temperature.*/
|
||||
|
||||
/**
|
||||
* @brief External Low Speed oscillator (LSE) value.
|
||||
* This value is used by the UART, RTC HAL module to compute the system frequency
|
||||
*/
|
||||
#if !defined(LSE_VALUE)
|
||||
#define LSE_VALUE 32768U /*!< Value of the External oscillator in Hz*/
|
||||
#endif /* LSE_VALUE */
|
||||
|
||||
/**
|
||||
* @brief Internal Multiple Speed oscillator (HSI48) default value.
|
||||
* This value is the default HSI48 range value after Reset.
|
||||
*/
|
||||
#if !defined(HSI48_VALUE)
|
||||
#define HSI48_VALUE ((uint32_t)48000000) /*!< Value of the Internal oscillator in Hz*/
|
||||
#endif /* HSI48_VALUE */
|
||||
|
||||
#if !defined(LSE_STARTUP_TIMEOUT)
|
||||
#define LSE_STARTUP_TIMEOUT 1000U /*!< Time out for LSE start up, in ms */
|
||||
#endif /* HSE_STARTUP_TIMEOUT */
|
||||
|
||||
/**
|
||||
* @brief External clock source for SAI1 peripheral
|
||||
* This value is used by the RCC HAL module to compute the SAI1 & SAI2 clock source
|
||||
* frequency.
|
||||
*/
|
||||
#if !defined(EXTERNAL_SAI1_CLOCK_VALUE)
|
||||
#define EXTERNAL_SAI1_CLOCK_VALUE \
|
||||
((uint32_t)2097000) /*!< Value of the SAI1 External clock source in Hz*/
|
||||
#endif /* EXTERNAL_SAI1_CLOCK_VALUE */
|
||||
|
||||
/* Tip: To avoid modifying this file each time you need to use different HSE,
|
||||
=== you can define the HSE value in your toolchain compiler preprocessor. */
|
||||
|
||||
/* ########################### System Configuration ######################### */
|
||||
/**
|
||||
* @brief This is the HAL system configuration section
|
||||
*/
|
||||
|
||||
#define VDD_VALUE 3300U /*!< Value of VDD in mv */
|
||||
#define TICK_INT_PRIORITY 0U /*!< tick interrupt priority */
|
||||
#define USE_RTOS 0U
|
||||
#define PREFETCH_ENABLE 1U
|
||||
#define INSTRUCTION_CACHE_ENABLE 1U
|
||||
#define DATA_CACHE_ENABLE 1U
|
||||
|
||||
/* ########################## Assert Selection ############################## */
|
||||
/**
|
||||
* @brief Uncomment the line below to expanse the "assert_param" macro in the
|
||||
* HAL drivers code
|
||||
*/
|
||||
#ifdef APP_UNIT_TESTS
|
||||
#define USE_FULL_ASSERT 1U
|
||||
#endif
|
||||
|
||||
/* ################## SPI peripheral configuration ########################## */
|
||||
|
||||
/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
|
||||
* Activated: CRC code is present inside driver
|
||||
* Deactivated: CRC code cleaned from driver
|
||||
*/
|
||||
|
||||
#define USE_SPI_CRC 0U
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
/**
|
||||
* @brief Include module's header file
|
||||
*/
|
||||
#ifdef HAL_DMA_MODULE_ENABLED
|
||||
#include "stm32wbxx_hal_dma.h"
|
||||
#endif /* HAL_DMA_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_ADC_MODULE_ENABLED
|
||||
#include "stm32wbxx_hal_adc.h"
|
||||
#endif /* HAL_ADC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_COMP_MODULE_ENABLED
|
||||
#include "stm32wbxx_hal_comp.h"
|
||||
#endif /* HAL_COMP_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CORTEX_MODULE_ENABLED
|
||||
#include "stm32wbxx_hal_cortex.h"
|
||||
#endif /* HAL_CORTEX_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CRC_MODULE_ENABLED
|
||||
#include "stm32wbxx_hal_crc.h"
|
||||
#endif /* HAL_CRC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CRYP_MODULE_ENABLED
|
||||
#include "stm32wbxx_hal_cryp.h"
|
||||
#endif /* HAL_CRYP_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_EXTI_MODULE_ENABLED
|
||||
#include "stm32wbxx_hal_exti.h"
|
||||
#endif /* HAL_EXTI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_FLASH_MODULE_ENABLED
|
||||
#include "stm32wbxx_hal_flash.h"
|
||||
#endif /* HAL_FLASH_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_GPIO_MODULE_ENABLED
|
||||
#include "stm32wbxx_hal_gpio.h"
|
||||
#endif /* HAL_GPIO_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_HSEM_MODULE_ENABLED
|
||||
#include "stm32wbxx_hal_hsem.h"
|
||||
#endif /* HAL_HSEM_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_I2C_MODULE_ENABLED
|
||||
#include "stm32wbxx_hal_i2c.h"
|
||||
#endif /* HAL_I2C_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_IPCC_MODULE_ENABLED
|
||||
#include "stm32wbxx_hal_ipcc.h"
|
||||
#endif /* HAL_IPCC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_IRDA_MODULE_ENABLED
|
||||
#include "stm32wbxx_hal_irda.h"
|
||||
#endif /* HAL_IRDA_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_IWDG_MODULE_ENABLED
|
||||
#include "stm32wbxx_hal_iwdg.h"
|
||||
#endif /* HAL_IWDG_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_LCD_MODULE_ENABLED
|
||||
#include "stm32wbxx_hal_lcd.h"
|
||||
#endif /* HAL_LCD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_LPTIM_MODULE_ENABLED
|
||||
#include "stm32wbxx_hal_lptim.h"
|
||||
#endif /* HAL_LPTIM_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_PCD_MODULE_ENABLED
|
||||
#include "stm32wbxx_hal_pcd.h"
|
||||
#endif /* HAL_PCD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_PKA_MODULE_ENABLED
|
||||
#include "stm32wbxx_hal_pka.h"
|
||||
#endif /* HAL_PKA_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_PWR_MODULE_ENABLED
|
||||
#include "stm32wbxx_hal_pwr.h"
|
||||
#endif /* HAL_PWR_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_QSPI_MODULE_ENABLED
|
||||
#include "stm32wbxx_hal_qspi.h"
|
||||
#endif /* HAL_QSPI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_RCC_MODULE_ENABLED
|
||||
#include "stm32wbxx_hal_rcc.h"
|
||||
#endif /* HAL_RCC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_RNG_MODULE_ENABLED
|
||||
#include "stm32wbxx_hal_rng.h"
|
||||
#endif /* HAL_RNG_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_RTC_MODULE_ENABLED
|
||||
#include "stm32wbxx_hal_rtc.h"
|
||||
#endif /* HAL_RTC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SAI_MODULE_ENABLED
|
||||
#include "stm32wbxx_hal_sai.h"
|
||||
#endif /* HAL_SAI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SMARTCARD_MODULE_ENABLED
|
||||
#include "stm32wbxx_hal_smartcard.h"
|
||||
#endif /* HAL_SMARTCARD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SMBUS_MODULE_ENABLED
|
||||
#include "stm32wbxx_hal_smbus.h"
|
||||
#endif /* HAL_SMBUS_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SPI_MODULE_ENABLED
|
||||
#include "stm32wbxx_hal_spi.h"
|
||||
#endif /* HAL_SPI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_TIM_MODULE_ENABLED
|
||||
#include "stm32wbxx_hal_tim.h"
|
||||
#endif /* HAL_TIM_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_TSC_MODULE_ENABLED
|
||||
#include "stm32wbxx_hal_tsc.h"
|
||||
#endif /* HAL_TSC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_UART_MODULE_ENABLED
|
||||
#include "stm32wbxx_hal_uart.h"
|
||||
#endif /* HAL_UART_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_USART_MODULE_ENABLED
|
||||
#include "stm32wbxx_hal_usart.h"
|
||||
#endif /* HAL_USART_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_WWDG_MODULE_ENABLED
|
||||
#include "stm32wbxx_hal_wwdg.h"
|
||||
#endif /* HAL_WWDG_MODULE_ENABLED */
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
#ifdef USE_FULL_ASSERT
|
||||
#define assert_param(expr) ((expr) ? (void)0U : assert_failed())
|
||||
void assert_failed();
|
||||
#else
|
||||
#define assert_param(expr) ((void)0U)
|
||||
#endif /* USE_FULL_ASSERT */
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __STM32WBxx_HAL_CONF_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
Reference in New Issue
Block a user