liz/flipperzero-firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

FL-339: cli diagnostic interface for power subsystem. (#256)

Browse Source 
* Core, API: add externs for c++
* Makefile: improve debug speed, flash with openocd, cleanup f2 config
* Power: add cli diagnostic.
* Local: fix api hal externs
* Local: fix externs in main and flipper_hal
* F2: power state dump stabs
* Bootloader flashing with openocd
* F3: move bq drivers to libs
* temporary do not build drivers on local
* temporary do not build drivers on f2

Co-authored-by: aanper <mail@s3f.ru>
This commit is contained in:
あく
2020-12-02 13:47:13 +03:00
committed by GitHub
parent f58b322bb5
commit 3a6fbff8c3
31 changed files with 418 additions and 73 deletions
Download Patch File Download Diff File Expand all files Collapse all files

263
lib/drivers/bq25896_reg.h Normal file
View File

@@ -0,0 +1,263 @@
#pragma once
#include <stdbool.h>
#include <stdint.h>
#if BITS_BIG_ENDIAN == 1
#error Bit structures defined in this file is not portable to BE
#endif
#define BQ25896_ADDRESS 0xD6
typedef struct {
uint8_t IINLIM:6; // Input Current Limit, mA, offset: +100mA
bool EN_ILIM:1; // Enable ILIM Pin
bool EN_HIZ:1; // Enable HIZ Mode
} REG00;
#define IILIM_1600 (1<<5)
#define IILIM_800 (1<<4)
#define IILIM_400 (1<<3)
#define IILIM_200 (1<<2)
#define IILIM_100 (1<<1)
#define IILIM_50 (1<<0)
typedef struct {
uint8_t VINDPM_OS:5; // Input Voltage Limit Offset, mV
bool BCOLD:1; // Boost Mode Cold Temperature Monitor Threshold
uint8_t BHOT:2; // Boost Mode Hot Temperature Monitor Threshold
} REG01;
#define VINDPM_OS_1600 (1<<4)
#define VINDPM_OS_800 (1<<3)
#define VINDPM_OS_400 (1<<2)
#define VINDPM_OS_200 (1<<1)
#define VINDPM_OS_100 (1<<0)
typedef struct {
bool AUTO_DPDM_EN:1; // Automatic Input Detection Enable
bool FORCE_DPDM:1; // Force Input Detection
uint8_t RES:2; // Reserved
bool ICO_EN:1; // Input Current Optimizer (ICO) Enable
bool BOOST_FREQ:1; // Boost Mode Frequency Selection
bool CONV_RATE:1; // ADC Conversion Rate Selection
bool CONV_START:1; // ADC Conversion Start Control
} REG02;
typedef struct {
bool MIN_VBAT_SEL:1; // Minimum Battery Voltage (falling) to exit boost mode
uint8_t SYS_MIN:3; // Minimum System Voltage Limit, mV, offset: +3000mV
bool CHG_CONFIG:1; // Charge Enable Configuration
bool OTG_CONFIG:1; // Boost (OTG) Mode Configuration
bool WD_RST:1; // I2C Watchdog Timer Reset
bool BAT_LOADEN:1; // Battery Load (IBATLOAD) Enable
} REG03;
#define SYS_MIN_400 (1<<2)
#define SYS_MIN_200 (1<<1)
#define SYS_MIN_100 (1<<0)
typedef struct {
uint8_t ICHG:7; // Fast Charge Current Limit, mA
bool EN_PUMPX:1; // Current pulse control Enable
} REG04;
#define ICHG_4096 (1<<6)
#define ICHG_2048 (1<<5)
#define ICHG_1024 (1<<4)
#define ICHG_512 (1<<3)
#define ICHG_256 (1<<2)
#define ICHG_128 (1<<1)
#define ICHG_64 (1<<0)
typedef struct {
uint8_t ITERM:4; // Termination Current Limit, offset: +64mA
uint8_t IPRECHG:4; // Precharge Current Limit, offset: +64mA
} REG05;
#define IPRETERM_512 (1<<3)
#define IPRETERM_256 (1<<2)
#define IPRETERM_128 (1<<1)
#define IPRETERM_64 (1<<0)
typedef struct {
bool VRECHG:1; // Battery Recharge Threshold Offset
bool BATLOWV:1; // Battery Precharge to Fast Charge Threshold
uint8_t VREG:6; // Charge Voltage Limit, offset: +3840mV
} REG06;
#define VREG_512 (1<<5)
#define VREG_256 (1<<4)
#define VREG_128 (1<<3)
#define VREG_64 (1<<2)
#define VREG_32 (1<<1)
#define VREG_16 (1<<0)
typedef struct {
bool JEITA_ISET:1; // JEITA Low Temperature Current Setting
uint8_t CHG_TIMER:2; // Fast Charge Timer Setting
bool EN_TIMER:1; // Charging Safety Timer Enable
uint8_t WATCHDOG:2; // I2C Watchdog Timer Setting
bool STAT_DIS:1; // STAT Pin Disable
bool EN_TERM:1; // Charging Termination Enable
} REG07;
#define WATCHDOG_DIS (0b00)
#define WATCHDOG_40 (0b01)
#define WATCHDOG_80 (0b10)
#define WATCHDOG_160 (0b11)
#define CHG_TIMER_5 (0b00)
#define CHG_TIMER_8 (0b01)
#define CHG_TIMER_12 (0b10)
#define CHG_TIMER_20 (0b11)
typedef struct {
uint8_t TREG:2; // Thermal Regulation Threshold
uint8_t VCLAMP:3; // IR Compensation Voltage Clamp
uint8_t BAT_COMP:3; // IR Compensation Resistor Setting
} REG08;
#define BAT_COMP_80 (1<<2)
#define BAT_COMP_40 (1<<1)
#define BAT_COMP_20 (1<<0)
#define VCLAMP_128 (1<<2)
#define VCLAMP_64 (1<<1)
#define VCLAMP_32 (1<<0)
#define TREG_60 (0b00)
#define TREG_80 (0b01)
#define TREG_100 (0b10)
#define TREG_120 (0b11)
typedef struct {
bool PUMPX_DN:1; // Current pulse control voltage down enable
bool PUMPX_UP:1; // Current pulse control voltage up enable
bool BATFET_RST_EN:1; // BATFET full system reset enable
bool BATFET_DLY:1; // BATFET turn off delay control
bool JEITA_VSET:1; // JEITA High Temperature Voltage Setting
bool BATFET_DIS:1; // Force BATFET off to enable ship mode
bool TMR2X_EN:1; // Safety Timer Setting during DPM or Thermal Regulation
bool FORCE_ICO:1; // Force Start Input Current Optimizer
} REG09;
typedef struct {
uint8_t BOOST_LIM:3; // Boost Mode Current Limit
bool PFM_OTG_DIS:1; // PFM mode allowed in boost mode
uint8_t BOOSTV:4; // Boost Mode Voltage Regulation, offset: +4550mV
} REG0A;
#define BOOSTV_512 (1<<3)
#define BOOSTV_256 (1<<2)
#define BOOSTV_128 (1<<1)
#define BOOSTV_64 (1<<0)
#define BOOST_LIM_500 (0b000)
#define BOOST_LIM_750 (0b001)
#define BOOST_LIM_1200 (0b010)
#define BOOST_LIM_1400 (0b011)
#define BOOST_LIM_1650 (0b100)
#define BOOST_LIM_1875 (0b101)
#define BOOST_LIM_2150 (0b110)
#define BOOST_LIM_RSVD (0b111)
typedef enum {
VBusStatNo = 0b000,
VBusStatUSB = 0b001,
VBusStatExternal = 0b010,
VBusStatOTG = 0b111,
} VBusStat;
typedef enum {
ChrgStatNo = 0b00,
ChrgStatPre = 0b01,
ChrgStatFast = 0b10,
ChrgStatDone = 0b11,
} ChrgStat;
typedef struct {
bool VSYS_STAT:1; // VSYS Regulation Status
bool RES:1; // Reserved: Always reads 1
bool PG_STAT:1; // Power Good Status
ChrgStat CHRG_STAT:2; // Charging Status
VBusStat VBUS_STAT:3; // VBUS Status register
} REG0B;
typedef enum {
ChrgFaultNO = 0b00,
ChrgFaultIN = 0b01,
ChrgFaultTH = 0b10,
ChrgFaultTIM = 0b11,
} ChrgFault;
typedef enum {
NtcFaultNo = 0b000,
NtcFaultWarm = 0b010,
NtcFaultCool = 0b011,
NtcFaultCold = 0b101,
NtcFaultHot = 0b110,
} NtcFault;
typedef struct {
NtcFault NTC_FAULT:3; // NTC Fault Status
bool BAT_FAULT:1; // Battery Fault Status
ChrgFault CHRG_FAULT:2; // Charge Fault Status
bool BOOST_FAULT:1; // Boost Mode Fault Status
bool WATCHDOG_FAULT:1; // Watchdog Fault Status
} REG0C;
typedef struct {
uint8_t VINDPM:7; // Absolute VINDPM Threshold, offset: +2600mV
bool FORCE_VINDPM:1; // VINDPM Threshold Setting Method
} REG0D;
#define VINDPM_6400 (1<<6)
#define VINDPM_3200 (1<<5)
#define VINDPM_1600 (1<<4)
#define VINDPM_800 (1<<3)
#define VINDPM_400 (1<<2)
#define VINDPM_200 (1<<1)
#define VINDPM_100 (1<<0)
typedef struct {
uint8_t BATV:7; // ADC conversion of Battery Voltage (VBAT), offset: +2304mV
bool THERM_STAT:1; // Thermal Regulation Status
} REG0E;
typedef struct {
uint8_t SYSV:7; // ADDC conversion of System Voltage (VSYS), offset: +2304mV
uint8_t RES:1; // Reserved: Always reads 0
} REG0F;
typedef struct {
uint8_t TSPCT:7; // ADC conversion of TS Voltage (TS) as percentage of REGN, offset: +21%
uint8_t RES:1; // Reserved: Always reads 0
} REG10;
typedef struct {
uint8_t VBUSV:7; // ADC conversion of VBUS voltage (VBUS), offset: +2600mV
bool VBUS_GD:1; // VBUS Good Status
} REG11;
typedef struct {
uint8_t ICHGR:7; // ADC conversion of Charge Current (IBAT) when VBAT > VBATSHORT
uint8_t RES:1; // Reserved: Always reads 0
} REG12;
typedef struct {
uint8_t IDPM_LIM:6; // Input Current Limit in effect while Input Current Optimizer (ICO) is enabled, offset: 100mA (default)
bool IDPM_STAT:1; // IINDPM Status
bool VDPM_STAT:1; // VINDPM Status
} REG13;
typedef struct {
uint8_t DEV_REV:2; // Device Revision
bool TS_PROFILE:1; // Temperature Profile
uint8_t PN:3; // Device Configuration
bool ICO_OPTIMIZED:1; // Input Current Optimizer (ICO) Status
bool REG_RST:1; // Register Reset
} REG14;