FL-339: cli diagnostic interface for power subsystem. (#256)

* Core, API: add externs for c++ * Makefile: improve debug speed, flash with openocd, cleanup f2 config * Power: add cli diagnostic. * Local: fix api hal externs * Local: fix externs in main and flipper_hal * F2: power state dump stabs * Bootloader flashing with openocd * F3: move bq drivers to libs * temporary do not build drivers on local * temporary do not build drivers on f2 Co-authored-by: aanper <mail@s3f.ru>
2020-12-02 13:47:13 +03:00
parent f58b322bb5
commit 3a6fbff8c3
31 changed files with 418 additions and 73 deletions
--- a/lib/drivers/bq27220.h
+++ b/lib/drivers/bq27220.h
@@ -0,0 +1,71 @@
+#pragma once
+
+#include <stdint.h>
+#include <stdbool.h>
+
+#define BQ27220_ERROR 0x0
+#define BQ27220_SUCCESS 0x1
+
+typedef struct {
+    // Low byte, Low bit first
+    bool DSG:1;         // The device is in DISCHARGE
+    bool SYSDWN:1;      // System down bit indicating the system should shut down
+    bool TDA:1;         // Terminate Discharge Alarm
+    bool BATTPRES:1;    // Battery Present detected
+    bool AUTH_GD:1;     // Detect inserted battery
+    bool OCVGD:1;       // Good OCV measurement taken
+    bool TCA:1;         // Terminate Charge Alarm
+    bool RSVD:1;        // Reserved
+    // High byte, Low bit first
+    bool CHGINH:1;      // Charge inhibit
+    bool FC:1;          // Full-charged is detected
+    bool OTD:1;         // Overtemperature in discharge condition is detected
+    bool OTC:1;         // Overtemperature in charge condition is detected
+    bool SLEEP:1;       // Device is operating in SLEEP mode when set
+    bool OCVFAIL:1;     // Status bit indicating that the OCV reading failed due to current
+    bool OCVCOMP:1;     // An OCV measurement update is complete
+    bool FD:1;          // Full-discharge is detected
+} BatteryStatus;
+
+typedef struct {
+    // Low byte, Low bit first
+    bool CALMD:1;
+    bool SEC0:1;
+    bool SEC1:1;
+    bool EDV2:1;
+    bool VDQ:1;
+    bool INITCOMP:1;
+    bool SMTH:1;
+    bool BTPINT:1;
+    // High byte, Low bit first
+    uint8_t RSVD1:2;
+    bool CFGUPDATE:1;
+    uint8_t RSVD0:5;
+} OperationStatus;
+
+/* Initialize Driver */
+void bq27220_init();
+
+/* Get battery voltage in mV or error */
+uint16_t bq27220_get_voltage();
+
+/* Get current in mA or error*/
+int16_t bq27220_get_current();
+
+/* Get battery status */
+uint8_t bq27220_get_battery_status(BatteryStatus* battery_status);
+
+/* Get operation status */
+uint8_t bq27220_get_operation_status(OperationStatus* operation_status);
+
+/* Get temperature in units of 0.1°K */
+uint16_t bq27220_get_temperature();
+
+/* Get compensated full charge capacity in in mAh */
+uint16_t bq27220_get_full_charge_capacity();
+
+/* Get remaining capacity in in mAh */
+uint16_t bq27220_get_remaining_capacity();
+
+/* Get predicted remaining battery capacity in percents */
+uint16_t bq27220_get_state_of_charge();