[FL-1196] Targets: add F6 (#427)
* Targets: add F6 * F6: Update linker script for use with internal storage * F6: synchronize with F5, add all changes arriving in V9 board, update cube project. Github workflow: add multi-target build, add F6 to build targets. * CI: fix full assembly * CI: better artifact naming scheme * CI: fix artifacts wildcard * F6: Swap C10 - A15, vibro and sdcard detect pins
This commit is contained in:
あく
GitHub
178
firmware/targets/f6/Src/main.c
Normal file
178
firmware/targets/f6/Src/main.c
Normal file
@@ -0,0 +1,178 @@
|
||||
#include "main.h"
|
||||
|
||||
#include "cmsis_os2.h"
|
||||
#include "adc.h"
|
||||
#include "aes.h"
|
||||
#include "comp.h"
|
||||
#include "crc.h"
|
||||
#include "pka.h"
|
||||
#include "rf.h"
|
||||
#include "rng.h"
|
||||
#include "rtc.h"
|
||||
#include "spi.h"
|
||||
#include "tim.h"
|
||||
#include "usart.h"
|
||||
#include "usb_device.h"
|
||||
#include "gpio.h"
|
||||
#include "fatfs/fatfs.h"
|
||||
|
||||
#include <furi.h>
|
||||
#include <api-hal.h>
|
||||
#include <flipper.h>
|
||||
|
||||
void SystemClock_Config(void);
|
||||
void MX_FREERTOS_Init(void);
|
||||
|
||||
int main(void) {
|
||||
// Initialize FURI layer
|
||||
furi_init();
|
||||
|
||||
// Initialize ST HAL hardware
|
||||
HAL_Init();
|
||||
SystemClock_Config();
|
||||
MX_USART1_UART_Init();
|
||||
FURI_LOG_I("HAL", "USART OK");
|
||||
MX_RTC_Init();
|
||||
FURI_LOG_I("HAL", "RTC OK");
|
||||
MX_GPIO_Init();
|
||||
FURI_LOG_I("HAL", "GPIO OK");
|
||||
MX_ADC1_Init();
|
||||
FURI_LOG_I("HAL", "ADC1 OK");
|
||||
MX_SPI1_Init();
|
||||
FURI_LOG_I("HAL", "SPI1 OK");
|
||||
MX_SPI2_Init();
|
||||
FURI_LOG_I("HAL", "SPI2 OK");
|
||||
MX_USB_Device_Init();
|
||||
FURI_LOG_I("HAL", "USB OK");
|
||||
MX_TIM1_Init();
|
||||
FURI_LOG_I("HAL", "TIM1 OK");
|
||||
MX_TIM2_Init();
|
||||
FURI_LOG_I("HAL", "TIM2 OK");
|
||||
MX_TIM16_Init();
|
||||
FURI_LOG_I("HAL", "TIM16 OK");
|
||||
MX_COMP1_Init();
|
||||
FURI_LOG_I("HAL", "COMP1 OK");
|
||||
MX_RF_Init();
|
||||
FURI_LOG_I("HAL", "RF OK");
|
||||
MX_PKA_Init();
|
||||
FURI_LOG_I("HAL", "PKA OK");
|
||||
MX_RNG_Init();
|
||||
FURI_LOG_I("HAL", "RNG OK");
|
||||
MX_AES1_Init();
|
||||
FURI_LOG_I("HAL", "AES1 OK");
|
||||
MX_AES2_Init();
|
||||
FURI_LOG_I("HAL", "AES2 OK");
|
||||
MX_CRC_Init();
|
||||
FURI_LOG_I("HAL", "CRC OK");
|
||||
|
||||
// Flipper API HAL
|
||||
api_hal_init();
|
||||
|
||||
// 3rd party
|
||||
MX_FATFS_Init();
|
||||
FURI_LOG_I("HAL", "FATFS OK");
|
||||
// CMSIS initialization
|
||||
osKernelInitialize();
|
||||
FURI_LOG_I("HAL", "KERNEL OK");
|
||||
// Init flipper
|
||||
flipper_init();
|
||||
// Start kernel
|
||||
osKernelStart();
|
||||
|
||||
while (1) {}
|
||||
}
|
||||
|
||||
void SystemClock_Config(void)
|
||||
{
|
||||
RCC_OscInitTypeDef RCC_OscInitStruct = {0};
|
||||
RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
|
||||
RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = {0};
|
||||
|
||||
HAL_PWR_EnableBkUpAccess();
|
||||
|
||||
__HAL_RCC_LSEDRIVE_CONFIG(RCC_LSEDRIVE_MEDIUMLOW);
|
||||
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
|
||||
LL_RCC_HSE_SetCapacitorTuning(0x18);
|
||||
|
||||
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_HSE
|
||||
| RCC_OSCILLATORTYPE_LSI1 | RCC_OSCILLATORTYPE_LSE;
|
||||
RCC_OscInitStruct.HSIState = RCC_HSI_ON;
|
||||
RCC_OscInitStruct.HSEState = RCC_HSE_ON;
|
||||
RCC_OscInitStruct.LSIState = RCC_LSI_ON;
|
||||
RCC_OscInitStruct.LSEState = RCC_LSE_ON;
|
||||
RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
|
||||
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
|
||||
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
|
||||
RCC_OscInitStruct.PLL.PLLM = RCC_PLLM_DIV2;
|
||||
RCC_OscInitStruct.PLL.PLLN = 8;
|
||||
RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2;
|
||||
RCC_OscInitStruct.PLL.PLLR = RCC_PLLR_DIV2;
|
||||
RCC_OscInitStruct.PLL.PLLQ = RCC_PLLQ_DIV2;
|
||||
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) {
|
||||
Error_Handler();
|
||||
}
|
||||
|
||||
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK4|RCC_CLOCKTYPE_HCLK2
|
||||
|RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
|
||||
|RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2;
|
||||
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
|
||||
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
|
||||
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1;
|
||||
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
|
||||
RCC_ClkInitStruct.AHBCLK2Divider = RCC_SYSCLK_DIV2;
|
||||
RCC_ClkInitStruct.AHBCLK4Divider = RCC_SYSCLK_DIV1;
|
||||
|
||||
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_3) != HAL_OK) {
|
||||
Error_Handler();
|
||||
}
|
||||
|
||||
PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_SMPS|RCC_PERIPHCLK_RFWAKEUP
|
||||
|RCC_PERIPHCLK_RTC|RCC_PERIPHCLK_USART1
|
||||
|RCC_PERIPHCLK_I2C1|RCC_PERIPHCLK_CLK48SEL
|
||||
|RCC_PERIPHCLK_USB|RCC_PERIPHCLK_RNG
|
||||
|RCC_PERIPHCLK_ADC;
|
||||
PeriphClkInitStruct.PLLSAI1.PLLN = 6;
|
||||
PeriphClkInitStruct.PLLSAI1.PLLP = RCC_PLLP_DIV2;
|
||||
PeriphClkInitStruct.PLLSAI1.PLLQ = RCC_PLLQ_DIV2;
|
||||
PeriphClkInitStruct.PLLSAI1.PLLR = RCC_PLLR_DIV2;
|
||||
PeriphClkInitStruct.PLLSAI1.PLLSAI1ClockOut = RCC_PLLSAI1_USBCLK|RCC_PLLSAI1_ADCCLK;
|
||||
PeriphClkInitStruct.Usart1ClockSelection = RCC_USART1CLKSOURCE_PCLK2;
|
||||
PeriphClkInitStruct.I2c1ClockSelection = RCC_I2C1CLKSOURCE_PCLK1;
|
||||
PeriphClkInitStruct.UsbClockSelection = RCC_USBCLKSOURCE_PLLSAI1;
|
||||
PeriphClkInitStruct.RngClockSelection = RCC_RNGCLKSOURCE_CLK48;
|
||||
PeriphClkInitStruct.AdcClockSelection = RCC_ADCCLKSOURCE_PLLSAI1;
|
||||
PeriphClkInitStruct.RTCClockSelection = RCC_RTCCLKSOURCE_LSE;
|
||||
PeriphClkInitStruct.RFWakeUpClockSelection = RCC_RFWKPCLKSOURCE_LSE;
|
||||
PeriphClkInitStruct.SmpsClockSelection = RCC_SMPSCLKSOURCE_HSE;
|
||||
PeriphClkInitStruct.SmpsDivSelection = RCC_SMPSCLKDIV_RANGE1;
|
||||
if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK) {
|
||||
Error_Handler();
|
||||
}
|
||||
|
||||
// CSS for HSE
|
||||
HAL_RCC_EnableCSS();
|
||||
// CSS for LSE
|
||||
HAL_RCCEx_EnableLSECSS();
|
||||
HAL_RCCEx_EnableLSECSS_IT();
|
||||
}
|
||||
|
||||
void Error_Handler(void) {
|
||||
asm("bkpt 1");
|
||||
while(1) {}
|
||||
}
|
||||
|
||||
#ifdef USE_FULL_ASSERT
|
||||
/**
|
||||
* @brief Reports the name of the source file and the source line number
|
||||
* where the assert_param error has occurred.
|
||||
* @param file: pointer to the source file name
|
||||
* @param line: assert_param error line source number
|
||||
* @retval None
|
||||
*/
|
||||
void assert_failed(uint8_t *file, uint32_t line) {
|
||||
/* USER CODE BEGIN 6 */
|
||||
/* User can add his own implementation to report the file name and line number,
|
||||
tex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
|
||||
/* USER CODE END 6 */
|
||||
}
|
||||
#endif /* USE_FULL_ASSERT */
|
||||
Reference in New Issue
Block a user