[FL-1587] RFID: Clock for emulation timer from antenna (#622)
* RFID: pull antenna down when emulating * Rfid: fixed HID emulation by adding zero pulse every 4 bits * Rfid: HID emulation fixed with DSP based FSK oscillator. * Rfid: receive 125KHz clock for emulation timer from antenna and comparator * Rfid: commented unused variable * Firmware: rollback changes in f6. * Add F7 target based on F6. * F7/F6: update cube projects, apply changes to the targets, update linker scripts with correct RAM start values. * FuriHal: RFID init routine. * Scripts: update OTP tool for v11 board Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
This commit is contained in:
SG
GitHub
136
firmware/targets/f7/ble-glue/tl_dbg_conf.h
Normal file
136
firmware/targets/f7/ble-glue/tl_dbg_conf.h
Normal file
@@ -0,0 +1,136 @@
|
||||
/* USER CODE BEGIN Header */
|
||||
/**
|
||||
******************************************************************************
|
||||
* File Name : App/tl_dbg_conf.h
|
||||
* Description : Debug configuration file for stm32wpan transport layer interface.
|
||||
*
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2020 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under Ultimate Liberty license
|
||||
* SLA0044, the "License"; You may not use this file except in compliance with
|
||||
* the License. You may obtain a copy of the License at:
|
||||
* www.st.com/SLA0044
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
/* USER CODE END Header */
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __TL_DBG_CONF_H
|
||||
#define __TL_DBG_CONF_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* USER CODE BEGIN Tl_Conf */
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "app_conf.h" /* required as some configuration used in dbg_trace.h are set there */
|
||||
#include "dbg_trace.h"
|
||||
#include "hw_if.h"
|
||||
|
||||
/**
|
||||
* Enable or Disable traces
|
||||
* The raw data output is the hci binary packet format as specified by the BT specification *
|
||||
*/
|
||||
#define TL_SHCI_CMD_DBG_EN 0 /* Reports System commands sent to CPU2 and the command response */
|
||||
#define TL_SHCI_CMD_DBG_RAW_EN 0 /* Reports raw data System commands sent to CPU2 and the command response */
|
||||
#define TL_SHCI_EVT_DBG_EN 0 /* Reports System Asynchronous Events received from CPU2 */
|
||||
#define TL_SHCI_EVT_DBG_RAW_EN 0 /* Reports raw data System Asynchronous Events received from CPU2 */
|
||||
|
||||
#define TL_HCI_CMD_DBG_EN 0 /* Reports BLE command sent to CPU2 and the command response */
|
||||
#define TL_HCI_CMD_DBG_RAW_EN 0 /* Reports raw data BLE command sent to CPU2 and the command response */
|
||||
#define TL_HCI_EVT_DBG_EN 0 /* Reports BLE Asynchronous Events received from CPU2 */
|
||||
#define TL_HCI_EVT_DBG_RAW_EN 0 /* Reports raw data BLE Asynchronous Events received from CPU2 */
|
||||
|
||||
#define TL_MM_DBG_EN 0 /* Reports the informations of the buffer released to CPU2 */
|
||||
|
||||
/**
|
||||
* Macro definition
|
||||
*/
|
||||
|
||||
/**
|
||||
* System Transport Layer
|
||||
*/
|
||||
#if (TL_SHCI_CMD_DBG_EN != 0)
|
||||
#define TL_SHCI_CMD_DBG_MSG PRINT_MESG_DBG
|
||||
#define TL_SHCI_CMD_DBG_BUF PRINT_LOG_BUFF_DBG
|
||||
#else
|
||||
#define TL_SHCI_CMD_DBG_MSG(...)
|
||||
#define TL_SHCI_CMD_DBG_BUF(...)
|
||||
#endif
|
||||
|
||||
#if (TL_SHCI_CMD_DBG_RAW_EN != 0)
|
||||
#define TL_SHCI_CMD_DBG_RAW(_PDATA_, _SIZE_) furi_hal_console_tx(_PDATA_, _SIZE_)
|
||||
#else
|
||||
#define TL_SHCI_CMD_DBG_RAW(...)
|
||||
#endif
|
||||
|
||||
#if (TL_SHCI_EVT_DBG_EN != 0)
|
||||
#define TL_SHCI_EVT_DBG_MSG PRINT_MESG_DBG
|
||||
#define TL_SHCI_EVT_DBG_BUF PRINT_LOG_BUFF_DBG
|
||||
#else
|
||||
#define TL_SHCI_EVT_DBG_MSG(...)
|
||||
#define TL_SHCI_EVT_DBG_BUF(...)
|
||||
#endif
|
||||
|
||||
#if (TL_SHCI_EVT_DBG_RAW_EN != 0)
|
||||
#define TL_SHCI_EVT_DBG_RAW(_PDATA_, _SIZE_) furi_hal_console_tx(_PDATA_, _SIZE_)
|
||||
#else
|
||||
#define TL_SHCI_EVT_DBG_RAW(...)
|
||||
#endif
|
||||
|
||||
/**
|
||||
* BLE Transport Layer
|
||||
*/
|
||||
#if (TL_HCI_CMD_DBG_EN != 0)
|
||||
#define TL_HCI_CMD_DBG_MSG PRINT_MESG_DBG
|
||||
#define TL_HCI_CMD_DBG_BUF PRINT_LOG_BUFF_DBG
|
||||
#else
|
||||
#define TL_HCI_CMD_DBG_MSG(...)
|
||||
#define TL_HCI_CMD_DBG_BUF(...)
|
||||
#endif
|
||||
|
||||
#if (TL_HCI_CMD_DBG_RAW_EN != 0)
|
||||
#define TL_HCI_CMD_DBG_RAW(_PDATA_, _SIZE_) furi_hal_console_tx(_PDATA_, _SIZE_)
|
||||
#else
|
||||
#define TL_HCI_CMD_DBG_RAW(...)
|
||||
#endif
|
||||
|
||||
#if (TL_HCI_EVT_DBG_EN != 0)
|
||||
#define TL_HCI_EVT_DBG_MSG PRINT_MESG_DBG
|
||||
#define TL_HCI_EVT_DBG_BUF PRINT_LOG_BUFF_DBG
|
||||
#else
|
||||
#define TL_HCI_EVT_DBG_MSG(...)
|
||||
#define TL_HCI_EVT_DBG_BUF(...)
|
||||
#endif
|
||||
|
||||
#if (TL_HCI_EVT_DBG_RAW_EN != 0)
|
||||
#define TL_HCI_EVT_DBG_RAW(_PDATA_, _SIZE_) furi_hal_console_tx(_PDATA_, _SIZE_)
|
||||
#else
|
||||
#define TL_HCI_EVT_DBG_RAW(...)
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Memory Manager - Released buffer tracing
|
||||
*/
|
||||
#if (TL_MM_DBG_EN != 0)
|
||||
#define TL_MM_DBG_MSG PRINT_MESG_DBG
|
||||
#else
|
||||
#define TL_MM_DBG_MSG(...)
|
||||
#endif
|
||||
|
||||
/* USER CODE END Tl_Conf */
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /*__TL_DBG_CONF_H */
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
Reference in New Issue
Block a user