[FL-1587] RFID: Clock for emulation timer from antenna (#622)

* RFID: pull antenna down when emulating * Rfid: fixed HID emulation by adding zero pulse every 4 bits * Rfid: HID emulation fixed with DSP based FSK oscillator. * Rfid: receive 125KHz clock for emulation timer from antenna and comparator * Rfid: commented unused variable * Firmware: rollback changes in f6. * Add F7 target based on F6. * F7/F6: update cube projects, apply changes to the targets, update linker scripts with correct RAM start values. * FuriHal: RFID init routine. * Scripts: update OTP tool for v11 board Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2021-09-10 12:19:02 +10:00
parent b6579d66d8
commit 8073992925
207 changed files with 28052 additions and 932 deletions
--- a/firmware/targets/f7/furi-hal/furi-hal-spi-config.c
+++ b/firmware/targets/f7/furi-hal/furi-hal-spi-config.c
@@ -0,0 +1,103 @@
+#include <furi-hal-spi-config.h>
+#include <furi-hal-resources.h>
+
+#define SPI_R SPI1
+#define SPI_D SPI2
+
+const LL_SPI_InitTypeDef furi_hal_spi_config_nfc = {
+    .Mode = LL_SPI_MODE_MASTER,
+    .TransferDirection = LL_SPI_FULL_DUPLEX,
+    .DataWidth = LL_SPI_DATAWIDTH_8BIT,
+    .ClockPolarity = LL_SPI_POLARITY_LOW,
+    .ClockPhase = LL_SPI_PHASE_2EDGE,
+    .NSS = LL_SPI_NSS_SOFT,
+    .BaudRate = LL_SPI_BAUDRATEPRESCALER_DIV8,
+    .BitOrder = LL_SPI_MSB_FIRST,
+    .CRCCalculation = LL_SPI_CRCCALCULATION_DISABLE,
+    .CRCPoly = 7,
+};
+
+const LL_SPI_InitTypeDef furi_hal_spi_config_subghz = {
+    .Mode = LL_SPI_MODE_MASTER,
+    .TransferDirection = LL_SPI_FULL_DUPLEX,
+    .DataWidth = LL_SPI_DATAWIDTH_8BIT,
+    .ClockPolarity = LL_SPI_POLARITY_LOW,
+    .ClockPhase = LL_SPI_PHASE_1EDGE,
+    .NSS = LL_SPI_NSS_SOFT,
+    .BaudRate = LL_SPI_BAUDRATEPRESCALER_DIV8,
+    .BitOrder = LL_SPI_MSB_FIRST,
+    .CRCCalculation = LL_SPI_CRCCALCULATION_DISABLE,
+    .CRCPoly = 7,
+};
+
+const LL_SPI_InitTypeDef furi_hal_spi_config_display = {
+    .Mode = LL_SPI_MODE_MASTER,
+    .TransferDirection = LL_SPI_FULL_DUPLEX,
+    .DataWidth = LL_SPI_DATAWIDTH_8BIT,
+    .ClockPolarity = LL_SPI_POLARITY_LOW,
+    .ClockPhase = LL_SPI_PHASE_1EDGE,
+    .NSS = LL_SPI_NSS_SOFT,
+    .BaudRate = LL_SPI_BAUDRATEPRESCALER_DIV16,
+    .BitOrder = LL_SPI_MSB_FIRST,
+    .CRCCalculation = LL_SPI_CRCCALCULATION_DISABLE,
+    .CRCPoly = 7,
+};
+
+/**
+ * SD Card in fast mode (after init)
+ */
+const LL_SPI_InitTypeDef furi_hal_spi_config_sd_fast = {
+    .Mode = LL_SPI_MODE_MASTER,
+    .TransferDirection = LL_SPI_FULL_DUPLEX,
+    .DataWidth = LL_SPI_DATAWIDTH_8BIT,
+    .ClockPolarity = LL_SPI_POLARITY_LOW,
+    .ClockPhase = LL_SPI_PHASE_1EDGE,
+    .NSS = LL_SPI_NSS_SOFT,
+    .BaudRate = LL_SPI_BAUDRATEPRESCALER_DIV2,
+    .BitOrder = LL_SPI_MSB_FIRST,
+    .CRCCalculation = LL_SPI_CRCCALCULATION_DISABLE,
+    .CRCPoly = 7,
+};
+
+/**
+ * SD Card in slow mode (before init)
+ */
+const LL_SPI_InitTypeDef furi_hal_spi_config_sd_slow = {
+    .Mode = LL_SPI_MODE_MASTER,
+    .TransferDirection = LL_SPI_FULL_DUPLEX,
+    .DataWidth = LL_SPI_DATAWIDTH_8BIT,
+    .ClockPolarity = LL_SPI_POLARITY_LOW,
+    .ClockPhase = LL_SPI_PHASE_1EDGE,
+    .NSS = LL_SPI_NSS_SOFT,
+    .BaudRate = LL_SPI_BAUDRATEPRESCALER_DIV32,
+    .BitOrder = LL_SPI_MSB_FIRST,
+    .CRCCalculation = LL_SPI_CRCCALCULATION_DISABLE,
+    .CRCPoly = 7,
+};
+
+osMutexId_t spi_mutex_d = NULL;
+osMutexId_t spi_mutex_r = NULL;
+
+const FuriHalSpiBus spi_r = {
+    .spi=SPI_R,
+    .mutex=&spi_mutex_r,
+    .miso=&gpio_spi_r_miso,
+    .mosi=&gpio_spi_r_mosi,
+    .clk=&gpio_spi_r_sck,
+};
+
+const FuriHalSpiBus spi_d = {
+    .spi=SPI_D,
+    .mutex=&spi_mutex_d,
+    .miso=&gpio_spi_d_miso,
+    .mosi=&gpio_spi_d_mosi,
+    .clk=&gpio_spi_d_sck,
+};
+
+const FuriHalSpiDevice furi_hal_spi_devices[FuriHalSpiDeviceIdMax] = {
+    { .bus=&spi_r, .config=&furi_hal_spi_config_subghz, .chip_select=&gpio_subghz_cs, },
+    { .bus=&spi_d, .config=&furi_hal_spi_config_display, .chip_select=&gpio_display_cs, },
+    { .bus=&spi_d, .config=&furi_hal_spi_config_sd_fast, .chip_select=&gpio_sdcard_cs, },
+    { .bus=&spi_d, .config=&furi_hal_spi_config_sd_slow, .chip_select=&gpio_sdcard_cs, },
+    { .bus=&spi_r, .config=&furi_hal_spi_config_nfc, .chip_select=&gpio_nfc_cs },
+};