[FL-1587] RFID: Clock for emulation timer from antenna (#622)

* RFID: pull antenna down when emulating
* Rfid: fixed HID emulation by adding zero pulse every 4 bits
* Rfid: HID emulation fixed with DSP based FSK oscillator.
* Rfid: receive 125KHz clock for emulation timer from antenna and comparator
* Rfid: commented unused variable
* Firmware: rollback changes in f6.
* Add F7 target based on F6.
* F7/F6: update cube projects, apply changes to the targets, update linker scripts with correct RAM start values.
* FuriHal: RFID init routine.
* Scripts: update OTP tool for v11 board

Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>

firmware/targets/f7/furi-hal/furi-hal-spi-config.h

@@ -0,0 +1,63 @@
+#pragma once
+
+#include <furi-hal-gpio.h>
+#include <stm32wbxx_ll_spi.h>
+#include <cmsis_os2.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+extern const LL_SPI_InitTypeDef furi_hal_spi_config_nfc;
+extern const LL_SPI_InitTypeDef furi_hal_spi_config_subghz;
+extern const LL_SPI_InitTypeDef furi_hal_spi_config_display;
+extern const LL_SPI_InitTypeDef furi_hal_spi_config_sd_fast;
+extern const LL_SPI_InitTypeDef furi_hal_spi_config_sd_slow;
+
+/** FURI HAL SPI BUS handler
+ * Structure content may change at some point
+ */
+typedef struct {
+    const SPI_TypeDef* spi;
+    const osMutexId_t* mutex;
+    const GpioPin* miso;
+    const GpioPin* mosi;
+    const GpioPin* clk;
+} FuriHalSpiBus;
+
+/** FURI HAL SPI Device handler
+ * Structure content may change at some point
+ */
+typedef struct {
+    const FuriHalSpiBus* bus;
+    const LL_SPI_InitTypeDef* config;
+    const GpioPin* chip_select;
+} FuriHalSpiDevice;
+
+/** FURI HAL SPI Standard Device IDs */
+typedef enum {
+    FuriHalSpiDeviceIdSubGhz,        /** SubGhz: CC1101, non-standard SPI usage */
+    FuriHalSpiDeviceIdDisplay,       /** Display: ERC12864, only have MOSI */
+    FuriHalSpiDeviceIdSdCardFast,    /** SDCARD: fast mode, after initialization */
+    FuriHalSpiDeviceIdSdCardSlow,    /** SDCARD: slow mode, before initialization */
+    FuriHalSpiDeviceIdNfc,           /** NFC: ST25R3916, pretty standard, but RFAL makes it complex */
+
+    FuriHalSpiDeviceIdMax,           /** Service Value, do not use */
+} FuriHalSpiDeviceId;
+
+/** Furi Hal Spi Bus R
+ * CC1101, Nfc
+ */
+extern const FuriHalSpiBus spi_r;
+
+/** Furi Hal Spi Bus D
+ * Display, SdCard
+ */
+extern const FuriHalSpiBus spi_d;
+
+/** Furi Hal Spi devices */
+extern const FuriHalSpiDevice furi_hal_spi_devices[FuriHalSpiDeviceIdMax];
+
+#ifdef __cplusplus
+}
+#endif