liz/flipperzero-firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Fixed typos (#1999)

Browse Source 
Co-authored-by: Sergey Gavrilov <who.just.the.doctor@gmail.com>
Co-authored-by: あく <alleteam@gmail.com>
This commit is contained in:
lauaall
2022-11-10 18:48:58 +02:00
committed by GitHub
parent e7c4b40dbe
commit aec36e7041
1 changed files with 11 additions and 11 deletions
Download Patch File Download Diff File Expand all files Collapse all files

22
documentation/KeyCombo.md
View File

@@ -1,7 +1,7 @@
# Key Combos
There are times when your flipper feels blue and don't respond to your commands.
In that case you may find this guide useful.
There are times when your flipper feels blue and doesn't respond to your commands.
In that case, you may find this guide useful.
## Basic Combos
@@ -9,7 +9,7 @@ In that case you may find this guide useful.
### Hardware Reset
- Press `LEFT` and `BACK` and hold for couple seconds
- Press `LEFT` and `BACK` and hold for a couple of seconds
- Release `LEFT` and `BACK`
This combo performs hardware reset by pulling MCU reset line down.
@@ -29,7 +29,7 @@ There is 1 case when it's not working:
- If you have not disconnected USB, then disconnect USB and repeat previous step
- Release `BACK` key
This combo performs reset by switching SYS power line off and then on.
This combo performs a reset by switching SYS power line off and then on.
Main components involved: Keys -> DD6(bq25896, charger)
There is 1 case when it's not working:
@@ -60,13 +60,13 @@ There is 1 case when it's not working:
### Hardware Reset + Software DFU
- Press `LEFT` and `BACK` and hold for couple seconds
- Press `LEFT` and `BACK` and hold for a couple of seconds
- Release `BACK`
- Device will enter DFU with indication (Blue LED + DFU Screen)
- Release `LEFT`
This combo performs hardware reset by pulling MCU reset line down.
Then `LEFT` key indicates to boot-loader that DFU mode requested.
Then `LEFT` key indicates to boot-loader that DFU mode is requested.
There are 2 cases when it's not working:
@@ -76,7 +76,7 @@ There are 2 cases when it's not working:
### Hardware Reset + Hardware DFU
- Press `LEFT` and `BACK` and `OK` and hold for couple seconds
- Press `LEFT` and `BACK` and `OK` and hold for a couple of seconds
- Release `BACK` and `LEFT`
- Device will enter DFU without indication
@@ -127,8 +127,8 @@ There are 2 cases when it's not working:
If none of the described methods were useful:
- Ensure battery charged
- Disconnect battery and connect again (Requires disassembly)
- Try to Flash device with ST-Link or other programmer that support SWD
- Ensure the battery charged
- Disconnect the battery and connect again (Requires disassembly)
- Try to Flash device with ST-Link or other programmer that supports SWD
If you still here and your device is not working: it's not software issue.
If you still here and your device is not working: it's not a software issue.