F2 F3 deprecate (#267)

* move f3-1 to f4, remove f3
* remove f2
* remove firmware F3 for pipeline
* remove patch for F4 makefile
* fix fw makefile
* migrate bootloader to f4

firmware/targets/f4/api-hal/api-hal-gpio.h

@@ -0,0 +1,77 @@
+#pragma once
+#include "main.h"
+#include "stdbool.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+// this defined in xx_hal_gpio.c, so...
+#define GPIO_NUMBER (16U)
+
+typedef enum {
+    GpioModeInput = GPIO_MODE_INPUT,
+    GpioModeOutputPushPull = GPIO_MODE_OUTPUT_PP,
+    GpioModeOutputOpenDrain = GPIO_MODE_OUTPUT_OD,
+    GpioModeAltFunctionPushPull = GPIO_MODE_AF_PP,
+    GpioModeAltFunctionOpenDrain = GPIO_MODE_AF_OD,
+    GpioModeAnalog = GPIO_MODE_ANALOG,
+    GpioModeInterruptRise = GPIO_MODE_IT_RISING,
+    GpioModeInterruptFall = GPIO_MODE_IT_FALLING,
+    GpioModeInterruptRiseFall = GPIO_MODE_IT_RISING_FALLING,
+    GpioModeEventRise = GPIO_MODE_EVT_RISING,
+    GpioModeEventFall = GPIO_MODE_EVT_FALLING,
+    GpioModeEventRiseFall = GPIO_MODE_EVT_RISING_FALLING,
+} GpioMode;
+
+typedef enum {
+    GpioSpeedLow = GPIO_SPEED_FREQ_LOW,
+    GpioSpeedMedium = GPIO_SPEED_FREQ_MEDIUM,
+    GpioSpeedHigh = GPIO_SPEED_FREQ_HIGH,
+    GpioSpeedVeryHigh = GPIO_SPEED_FREQ_VERY_HIGH,
+} GpioSpeed;
+
+typedef enum {
+    GpioPullNo = GPIO_NOPULL,
+    GpioPullUp = GPIO_PULLUP,
+    GpioPullDown = GPIO_PULLDOWN,
+} GpioPull;
+
+typedef struct {
+    GPIO_TypeDef* port;
+    uint16_t pin;
+} GpioPin;
+
+// init GPIO
+void hal_gpio_init(
+    const GpioPin* gpio,
+    const GpioMode mode,
+    const GpioPull pull,
+    const GpioSpeed speed);
+
+// write value to GPIO, false = LOW, true = HIGH
+static inline void hal_gpio_write(const GpioPin* gpio, const bool state) {
+    // writing to BSSR is an atomic operation
+    if(state == true) {
+        gpio->port->BSRR = gpio->pin;
+    } else {
+        gpio->port->BSRR = (uint32_t)gpio->pin << GPIO_NUMBER;
+    }
+}
+
+// read value from GPIO, false = LOW, true = HIGH
+static inline bool hal_gpio_read(const GpioPin* gpio) {
+    if((gpio->port->IDR & gpio->pin) != 0x00U) {
+        return true;
+    } else {
+        return false;
+    }
+}
+
+bool hal_gpio_read_sd_detect(void);
+
+void enable_cc1101_irq();
+
+#ifdef __cplusplus
+}
+#endif