Refactor F2/local before F3 merge (#220)

* add files from f3
* rollback lfs
* Move assets from LFS
* remove lfs from build

Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>

.gitattributes

@@ -1,5 +1 @@
-*.pdf filter=lfs diff=lfs merge=lfs -text
-*.gif filter=lfs diff=lfs merge=lfs -text
-*.png filter=lfs diff=lfs merge=lfs -text
-*.jpg filter=lfs diff=lfs merge=lfs -text
-*.jpeg filter=lfs diff=lfs merge=lfs -text
+

.github/workflows/ci.yml

@@ -15,7 +15,6 @@ jobs:
         uses: actions/checkout@v2
         with:
             submodules: true
-            lfs: true
 
       - uses: satackey/action-docker-layer-caching@v0.0.8
         continue-on-error: true

applications/applications.h

@@ -46,6 +46,10 @@ const FlipperStartupApp FLIPPER_STARTUP[] = {
     {.app = input_task, .name = "input_task", .libs = {0}},
 #endif
 
+#ifdef APP_EXAMPLE_INPUT_DUMP
+    {.app = application_input_dump, .name = "input dump", .libs = {1, FURI_LIB{"input_task"}}},
+#endif
+
 #ifdef APP_GUI
     {.app = backlight_control, .name = "backlight_control", .libs = {1, FURI_LIB{"input_task"}}},
     {.app = gui_task, .name = "gui_task", .libs = {0}},
@@ -102,7 +106,7 @@ const FlipperStartupApp FLIPPER_STARTUP[] = {
 #endif
 
 #ifdef APP_SPEAKER_DEMO
-    {.app = coreglitch_demo_0, .name = "coreglitch_demo_0", .libs = ""},
+    {.app = coreglitch_demo_0, .name = "coreglitch_demo_0", .libs = {0}},
 #endif
 };
 

applications/backlight-control/backlight-control.c

@@ -7,8 +7,15 @@ static void event_cb(const void* value, void* ctx) {
 const uint32_t BACKLIGHT_TIME = 10000;
 
 void backlight_control(void* p) {
-    // TODO use FURI
-    HAL_GPIO_WritePin(DISPLAY_BACKLIGHT_GPIO_Port, DISPLAY_BACKLIGHT_Pin, GPIO_PIN_SET);
+    // create pin
+    GpioPin backlight = backlight_gpio;
+
+    // TODO open record
+    GpioPin* backlight_record = &backlight;
+
+    // configure pin
+    gpio_init(backlight_record, GpioModeOutputPushPull);
+    gpio_write(backlight_record, true);
 
     StaticSemaphore_t event_descriptor;
     SemaphoreHandle_t update = xSemaphoreCreateCountingStatic(255, 0, &event_descriptor);
@@ -24,9 +31,9 @@ void backlight_control(void* p) {
     while(1) {
         // wait for event
         if(xSemaphoreTake(update, BACKLIGHT_TIME) == pdTRUE) {
-            HAL_GPIO_WritePin(DISPLAY_BACKLIGHT_GPIO_Port, DISPLAY_BACKLIGHT_Pin, GPIO_PIN_SET);
+            gpio_write(backlight_record, true);
         } else {
-            HAL_GPIO_WritePin(DISPLAY_BACKLIGHT_GPIO_Port, DISPLAY_BACKLIGHT_Pin, GPIO_PIN_RESET);
+            gpio_write(backlight_record, false);
         }
     }
 }

applications/cc1101-workaround/cc1101.cpp

@@ -1,5 +1,6 @@
 #include "flipper_v2.h"
 #include "cc1101-workaround/cc1101.h"
+#include "spi.h"
 
 // ******************************************************************************
 #define WRITE_BURST 0x40
@@ -27,34 +28,14 @@ CC1101::CC1101(GpioPin* ss_pin) {
 //******************************************************************************
 //SpiInit
 /******************************************************************************/
-extern SPI_HandleTypeDef hspi3;
+extern SPI_HandleTypeDef SPI_R;
 void CC1101::SpiInit(void) {
     //initialize spi pins
 
     //Enable spi master, MSB, SPI mode 0, FOSC/4
     SpiMode(0);
 
-    if(HAL_SPI_DeInit(&hspi3) != HAL_OK) {
-        Error_Handler();
-    }
-
-    hspi3.Init.Mode = SPI_MODE_MASTER;
-    hspi3.Init.Direction = SPI_DIRECTION_2LINES;
-    hspi3.Init.DataSize = SPI_DATASIZE_8BIT;
-    hspi3.Init.CLKPolarity = SPI_POLARITY_LOW;
-    hspi3.Init.CLKPhase = SPI_PHASE_1EDGE;
-    hspi3.Init.NSS = SPI_NSS_SOFT;
-    hspi3.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_64;
-    hspi3.Init.FirstBit = SPI_FIRSTBIT_MSB;
-    hspi3.Init.TIMode = SPI_TIMODE_DISABLE;
-    hspi3.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE;
-    hspi3.Init.CRCPolynomial = 7;
-    hspi3.Init.CRCLength = SPI_CRC_LENGTH_DATASIZE;
-    hspi3.Init.NSSPMode = SPI_NSS_PULSE_DISABLE;
-
-    if(HAL_SPI_Init(&hspi3) != HAL_OK) {
-        Error_Handler();
-    }
+    CC1101_SPI_Reconfigure();
 }
 
 void CC1101::SpiEnd(void) {
@@ -99,7 +80,7 @@ uint8_t CC1101::SpiTransfer(uint8_t value) {
     uint8_t buf[1] = {value};
     uint8_t rxbuf[1] = {0};
 
-    HAL_SPI_TransmitReceive(&hspi3, buf, rxbuf, 1, HAL_MAX_DELAY);
+    HAL_SPI_TransmitReceive(&SPI_R, buf, rxbuf, 1, HAL_MAX_DELAY);
 
     return rxbuf[0];
 }

applications/coreglitch_demo_0/coreglitch_demo_0.c

@@ -1,7 +1,7 @@
 #include "flipper.h"
 #include "u8g2/u8g2.h"
 
-extern TIM_HandleTypeDef htim5;
+extern TIM_HandleTypeDef SPEAKER_TIM;
 
 void coreglitch_demo_0(void* p) {
     FuriRecordSubscriber* log = get_default_log();
@@ -40,7 +40,8 @@ void coreglitch_demo_0(void* p) {
             }
 
             // TODO get sound from FURI
-            hal_pwm_set(width, freq, &htim5, TIM_CHANNEL_4);
+            hal_pwm_set(width, freq, &SPEAKER_TIM, SPEAKER_CH);
+
             // delay(1);
 
             cnt++;

applications/display-u8g2/display-u8g2.c

@@ -1,7 +1,8 @@
 #include "u8g2/u8g2.h"
 #include "flipper.h"
+#include "main.h"
 
-extern SPI_HandleTypeDef hspi1;
+extern SPI_HandleTypeDef SPI_D;
 
 // TODO: fix log
 #ifdef DEBUG
@@ -63,7 +64,7 @@ static uint8_t u8x8_hw_spi_stm32(u8x8_t* u8x8, uint8_t msg, uint8_t arg_int, voi
 #endif
 
         // TODO change it to FuriRecord SPI
-        HAL_SPI_Transmit(&hspi1, (uint8_t*)arg_ptr, arg_int, 10000);
+        HAL_SPI_Transmit(&SPI_D, (uint8_t*)arg_ptr, arg_int, 10000);
         break;
 
     case U8X8_MSG_BYTE_SET_DC:

applications/examples/blink.c

@@ -3,7 +3,7 @@
 
 void application_blink(void* p) {
     // create pin
-    GpioPin led = {.pin = GPIO_PIN_8, .port = GPIOA};
+    GpioPin led = led_gpio[0];
 
     // TODO open record
     GpioPin* led_record = &led;

applications/examples/fatfs_list.c

@@ -50,55 +50,37 @@ void fatfs_list(void* p) {
     QueueHandle_t event_queue = xQueueCreate(2, sizeof(AppEvent));
 
     furi_log = get_default_log();
+    fuprintf(furi_log, "[fatfs_list] app start\n");
 
     FuriRecordSubscriber* fb_record =
         furi_open_deprecated("u8g2_fb", false, false, NULL, NULL, NULL);
     if(fb_record == NULL) {
-        fuprintf(furi_log, "[widget][fatfs_list] cannot create fb record\n");
+        fuprintf(furi_log, "[fatfs_list] cannot create fb record\n");
         furiac_exit(NULL);
     }
 
     PubSub* event_record = furi_open("input_events");
     if(event_record == NULL) {
-        fuprintf(furi_log, "[widget][fatfs_list] cannot open input_events record\n");
+        fuprintf(furi_log, "[fatfs_list] cannot open input_events record\n");
         furiac_exit(NULL);
     }
     PubSubItem* subscription = subscribe_pubsub(event_record, event_cb, event_queue);
     if(subscription == NULL) {
-        fuprintf(furi_log, "[widget][fatfs_list] cannot register input_events callback\n");
+        fuprintf(furi_log, "[fatfs_list] cannot register input_events callback\n");
         furiac_exit(NULL);
     }
 
-    // clear display
-    u8g2_t* fb = furi_take(fb_record);
-    u8g2_ClearBuffer(fb);
-    furi_commit(fb_record);
-
     bsp_result = BSP_SD_Init();
 
     if(bsp_result != 0) {
-        furi_take(fb_record);
-
-        u8g2_SetFont(fb, u8g2_font_6x10_mf);
-        u8g2_SetDrawColor(fb, 1);
-        u8g2_SetFontMode(fb, 1);
-        u8g2_DrawStr(fb, 0, 12, "SD card init error");
-
-        furi_commit(fb_record);
+        fuprintf(furi_log, "[fatfs_list] SD card init error\n");
         furiac_exit(NULL);
     }
 
     result = f_mount(&SD_FatFs, (TCHAR const*)SD_Path, 1);
 
     if(result != FR_OK) {
-        furi_take(fb_record);
-
-        u8g2_SetFont(fb, u8g2_font_6x10_mf);
-        u8g2_SetDrawColor(fb, 1);
-        u8g2_SetFontMode(fb, 1);
-        u8g2_DrawStr(fb, 0, 12, "SD card mount error");
-
-        furi_commit(fb_record);
+        fuprintf(furi_log, "[fatfs_list] SD card mount error\n");
         furiac_exit(NULL);
     }
 
@@ -123,12 +105,6 @@ void fatfs_list(void* p) {
                 }
             }
 
-            // get display and draw
-            furi_take(fb_record);
-            u8g2_ClearBuffer(fb);
-            u8g2_SetFont(fb, u8g2_font_6x10_mf);
-            u8g2_SetDrawColor(fb, 1);
-            u8g2_SetFontMode(fb, 1);
             line_current = 1;
 
             // open root dir
@@ -156,8 +132,7 @@ void fatfs_list(void* p) {
                     } else {
                         snprintf(str_buffer, STR_BUFFER_SIZE, "FIL %s\n", fno.fname);
                     }
-
-                    u8g2_DrawStr(fb, 0, line_size * (line_current - line_position), str_buffer);
+                    fuprintf(furi_log, str_buffer);
                 }
 
                 line_current++;

applications/examples/input_dump.c

@@ -29,6 +29,8 @@ void application_input_dump(void* p) {
     furi_check(event_record);
     subscribe_pubsub(event_record, event_cb, NULL);
 
+    printf("Example app [input dump]\n");
+
     for(;;) {
         delay(100);
     }

applications/gui/u8g2_periphery.c

@@ -1,7 +1,8 @@
 #include "u8g2/u8g2.h"
 #include "flipper.h"
+#include <main.h>
 
-extern SPI_HandleTypeDef hspi1;
+extern SPI_HandleTypeDef SPI_D;
 
 // TODO: fix log
 #ifdef DEBUG
@@ -60,7 +61,7 @@ uint8_t u8x8_hw_spi_stm32(u8x8_t* u8x8, uint8_t msg, uint8_t arg_int, void* arg_
 #endif
 
         // TODO change it to FuriRecord SPI
-        HAL_SPI_Transmit(&hspi1, (uint8_t*)arg_ptr, arg_int, 10000);
+        HAL_SPI_Transmit(&SPI_D, (uint8_t*)arg_ptr, arg_int, 10000);
         break;
 
     case U8X8_MSG_BYTE_SET_DC:

applications/input/input.c

@@ -1,5 +1,4 @@
 #include <input/input.h>
-#include <input_priv.h>
 #include <stdio.h>
 #include <flipper_v2.h>
 
@@ -54,7 +53,14 @@ void input_task(void* p) {
     for(;;) {
         bool changed = false;
         for(uint32_t i = 0; i < INPUT_COUNT; i++) {
-            bool input_state = gpio_read(&input_gpio[i]) ^ input_invert[i];
+            bool input_state = false;
+
+            // dirty hack, f3 has no CHARGING pin
+            // TODO rewrite this
+            if(i < GPIO_INPUT_PINS_COUNT) {
+                input_state = gpio_read(&input_gpio[i]) ^ input_invert[i];
+            }
+
             if(input_state) {
                 if(debounce_counters[i] < DEBOUNCE_TICKS) {
                     debounce_counters[i] += 1;
@@ -103,7 +109,7 @@ void input_task(void* p) {
 
 void HAL_GPIO_EXTI_Callback(uint16_t pin) {
 #ifdef APP_NFC
-    if(pin == RFID_PULL_Pin) {
+    if(pin == NFC_IRQ_Pin) {
         nfc_isr();
         return;
     }

applications/irda/irda.c

@@ -7,6 +7,7 @@
 typedef enum {
     EventTypeTick,
     EventTypeKey,
+    EventTypeLed,
 } EventType;
 
 typedef struct {
@@ -121,13 +122,9 @@ void render_samsung(CanvasApi* canvas, State* state) {
 void input_carrier(AppEvent* event, State* state) {
     if(event->value.input.input == InputOk) {
         if(event->value.input.state) {
-            hal_pwm_set(
-                duty_cycles[state->carrier_duty_cycle_id],
-                state->carrier_freq,
-                &htim2,
-                TIM_CHANNEL_4);
+            irda_pwm_set(duty_cycles[state->carrier_duty_cycle_id], state->carrier_freq);
         } else {
-            hal_pwm_stop(&htim2, TIM_CHANNEL_4);
+            irda_pwm_stop();
         }
     }
 

applications/irda/irda_nec.c

@@ -4,18 +4,18 @@
 
 void ir_nec_preambula(void) {
     // 9ms carrier + 4.5ms pause
-    hal_pwm_set(NEC_DUTY_CYCLE, NEC_CARRIER_FREQUENCY, &htim2, TIM_CHANNEL_4);
+    irda_pwm_set(NEC_DUTY_CYCLE, NEC_CARRIER_FREQUENCY);
     delay_us(9000);
-    hal_pwm_stop(&htim2, TIM_CHANNEL_4);
+    irda_pwm_stop();
     delay_us(4500);
 }
 
 void ir_nec_send_bit(bool bit) {
     // 0 is 562.5us carrier + 1687.5us pause
     // 1 is 562.5us carrier + 562.5us pause
-    hal_pwm_set(NEC_DUTY_CYCLE, NEC_CARRIER_FREQUENCY, &htim2, TIM_CHANNEL_4);
+    irda_pwm_set(NEC_DUTY_CYCLE, NEC_CARRIER_FREQUENCY);
     delay_us(562.5);
-    hal_pwm_stop(&htim2, TIM_CHANNEL_4);
+    irda_pwm_stop();
     if(bit) {
         delay_us(562.5);
     } else {

applications/irda/irda_protocols.h

@@ -1,7 +1,7 @@
 #pragma once
 
 // our tx pin is TIM2_CH4
-extern TIM_HandleTypeDef htim2;
+extern TIM_HandleTypeDef TIM_A;
 
 #define RC5_CARRIER_FREQUENCY 36000
 #define RC5_DUTY_CYCLE 0.33

applications/irda/irda_samsung.c

@@ -3,16 +3,16 @@
 #include "irda_protocols.h"
 
 void ir_samsung_preambula(void) {
-    hal_pwm_set(SAMSUNG_DUTY_CYCLE, SAMSUNG_CARRIER_FREQUENCY, &htim2, TIM_CHANNEL_4);
+    irda_pwm_set(SAMSUNG_DUTY_CYCLE, SAMSUNG_CARRIER_FREQUENCY);
     delay_us(4500);
-    hal_pwm_stop(&htim2, TIM_CHANNEL_4);
+    irda_pwm_stop();
     delay_us(4500);
 }
 
 void ir_samsung_send_bit(bool bit) {
-    hal_pwm_set(SAMSUNG_DUTY_CYCLE, SAMSUNG_CARRIER_FREQUENCY, &htim2, TIM_CHANNEL_4);
+    irda_pwm_set(SAMSUNG_DUTY_CYCLE, SAMSUNG_CARRIER_FREQUENCY);
     delay_us(560);
-    hal_pwm_stop(&htim2, TIM_CHANNEL_4);
+    irda_pwm_stop();
     if(bit) {
         delay_us(1590);
     } else {

applications/lf-rfid/lf-rfid.c

@@ -43,7 +43,7 @@ static void input_callback(InputEvent* input_event, void* ctx) {
     osMessageQueuePut(event_queue, &event, 0, 0);
 }
 
-extern TIM_HandleTypeDef htim15;
+extern TIM_HandleTypeDef TIM_C;
 void em4100_emulation(uint8_t* data, GpioPin* pin);
 void prepare_data(uint32_t ID, uint32_t VENDOR, uint8_t* data);
 
@@ -51,7 +51,7 @@ void lf_rfid_workaround(void* p) {
     osMessageQueueId_t event_queue = osMessageQueueNew(1, sizeof(AppEvent), NULL);
 
     // create pin
-    GpioPin pull_pin = {.pin = GPIO_PIN_15, .port = GPIOB};
+    GpioPin pull_pin = {.pin = RFID_PULL_Pin, .port = RFID_PULL_GPIO_Port};
     // TODO open record
     GpioPin* pull_pin_record = &pull_pin;
 
@@ -92,7 +92,7 @@ void lf_rfid_workaround(void* p) {
             if(event.type == EventTypeKey) {
                 // press events
                 if(event.value.input.state && event.value.input.input == InputBack) {
-                    hal_pwmn_stop(&htim15, TIM_CHANNEL_1); // TODO: move to furiac_onexit
+                    hal_pwmn_stop(&TIM_C, TIM_CHANNEL_1); // TODO: move to furiac_onexit
                     gpio_init(pull_pin_record, GpioModeInput);
                     // TODO remove all widgets create by app
                     widget_enabled_set(widget, false);
@@ -122,7 +122,7 @@ void lf_rfid_workaround(void* p) {
         }
 
         hal_pwmn_set(
-            state->on ? 0.5 : 0.0, (float)(state->freq_khz * 1000), &htim15, TIM_CHANNEL_1);
+            state->on ? 0.5 : 0.0, (float)(state->freq_khz * 1000), &LFRFID_TIM, LFRFID_CH);
 
         if(!state->on) {
             em4100_emulation(emulation_data, pull_pin_record);

core/flipper_v2.h

@@ -18,6 +18,7 @@ extern "C" {
 #include "api-basic/check.h"
 
 #include "api-hal/api-gpio.h"
+#include "api-hal-resources.h"
 
 #include "gui/gui.h"
 

firmware/targets/f2/Inc/main.h

@@ -128,6 +128,30 @@ void Error_Handler(void);
 
 #define MISO_PIN GpioPin{.port = GPIOC, .pin = GPIO_PIN_11}
 
+#define SPI_R hspi3
+#define SPI_D hspi1
+#define SPI_SD_HANDLE SPI_R
+
+extern TIM_HandleTypeDef htim2;
+extern TIM_HandleTypeDef htim5;
+extern TIM_HandleTypeDef htim15;
+
+#define TIM_A htim2
+#define TIM_B htim5
+#define TIM_C htim15
+
+#define SPEAKER_TIM htim5
+#define SPEAKER_CH TIM_CHANNEL_4
+
+#define LFRFID_TIM htim15
+#define LFRFID_CH TIM_CHANNEL_1
+
+#define IRDA_TIM htim2
+#define IRDA_CH TIM_CHANNEL_4
+
+#define NFC_IRQ_Pin RFID_PULL_Pin
+#define NFC_IRQ_GPIO_Port RFID_PULL_GPIO_Port
+
 /* USER CODE END Private defines */
 
 #ifdef __cplusplus

firmware/targets/f2/Inc/spi.h

@@ -41,7 +41,10 @@ void MX_SPI1_Init(void);
 void MX_SPI3_Init(void);
 
 /* USER CODE BEGIN Prototypes */
-
+void NFC_SPI_Reconfigure();
+void SD_SPI_Reconfigure_Slow();
+void SD_SPI_Reconfigure_Fast();
+void CC1101_SPI_Reconfigure();
 /* USER CODE END Prototypes */
 
 #ifdef __cplusplus

firmware/targets/f2/Src/fatfs/spi_sd_hal.c

@@ -4,9 +4,6 @@
 #define SD_CS_LOW() HAL_GPIO_WritePin(SD_CS_GPIO_Port, SD_CS_Pin, GPIO_PIN_RESET)
 #define SD_CS_HIGH() HAL_GPIO_WritePin(SD_CS_GPIO_Port, SD_CS_Pin, GPIO_PIN_SET)
 
-#define SPI_SD_INSTANCE SPI3
-#define SPI_SD_HANDLE hspi3
-
 const uint32_t SpiTimeout = 1000;
 extern SPI_HandleTypeDef SPI_SD_HANDLE;
 uint8_t SD_IO_WriteByte(uint8_t Data);
@@ -64,46 +61,6 @@ __attribute__((unused)) static void SPIx_Write(uint8_t Value) {
     }
 }
 
-void SD_SPI_Slow_Init(void) {
-    SPI_SD_HANDLE.Instance = SPI_SD_INSTANCE;
-    SPI_SD_HANDLE.Init.Mode = SPI_MODE_MASTER;
-    SPI_SD_HANDLE.Init.Direction = SPI_DIRECTION_2LINES;
-    SPI_SD_HANDLE.Init.DataSize = SPI_DATASIZE_8BIT;
-    SPI_SD_HANDLE.Init.CLKPolarity = SPI_POLARITY_LOW;
-    SPI_SD_HANDLE.Init.CLKPhase = SPI_PHASE_1EDGE;
-    SPI_SD_HANDLE.Init.NSS = SPI_NSS_SOFT;
-    SPI_SD_HANDLE.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_256;
-    SPI_SD_HANDLE.Init.FirstBit = SPI_FIRSTBIT_MSB;
-    SPI_SD_HANDLE.Init.TIMode = SPI_TIMODE_DISABLE;
-    SPI_SD_HANDLE.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE;
-    SPI_SD_HANDLE.Init.CRCPolynomial = 7;
-    SPI_SD_HANDLE.Init.CRCLength = SPI_CRC_LENGTH_DATASIZE;
-    SPI_SD_HANDLE.Init.NSSPMode = SPI_NSS_PULSE_ENABLE;
-    if(HAL_SPI_Init(&SPI_SD_HANDLE) != HAL_OK) {
-        Error_Handler();
-    }
-}
-
-void SD_SPI_Fast_Init(void) {
-    SPI_SD_HANDLE.Instance = SPI_SD_INSTANCE;
-    SPI_SD_HANDLE.Init.Mode = SPI_MODE_MASTER;
-    SPI_SD_HANDLE.Init.Direction = SPI_DIRECTION_2LINES;
-    SPI_SD_HANDLE.Init.DataSize = SPI_DATASIZE_8BIT;
-    SPI_SD_HANDLE.Init.CLKPolarity = SPI_POLARITY_LOW;
-    SPI_SD_HANDLE.Init.CLKPhase = SPI_PHASE_1EDGE;
-    SPI_SD_HANDLE.Init.NSS = SPI_NSS_SOFT;
-    SPI_SD_HANDLE.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_2;
-    SPI_SD_HANDLE.Init.FirstBit = SPI_FIRSTBIT_MSB;
-    SPI_SD_HANDLE.Init.TIMode = SPI_TIMODE_DISABLE;
-    SPI_SD_HANDLE.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE;
-    SPI_SD_HANDLE.Init.CRCPolynomial = 7;
-    SPI_SD_HANDLE.Init.CRCLength = SPI_CRC_LENGTH_DATASIZE;
-    SPI_SD_HANDLE.Init.NSSPMode = SPI_NSS_PULSE_ENABLE;
-    if(HAL_SPI_Init(&SPI_SD_HANDLE) != HAL_OK) {
-        Error_Handler();
-    }
-}
-
 /******************************************************************************
                             LINK OPERATIONS
  *******************************************************************************/

firmware/targets/f2/Src/fatfs/stm32_adafruit_sd.c

@@ -91,6 +91,7 @@
 #include "stdlib.h"
 #include "string.h"
 #include "stdio.h"
+#include "spi.h"
 
 /** @addtogroup BSP
   * @{
@@ -290,7 +291,7 @@ static uint8_t SD_ReadData(void);
   */
 uint8_t BSP_SD_Init(void) {
     /* Init to maximum slow speed */
-    SD_SPI_Slow_Init();
+    SD_SPI_Reconfigure_Slow();
 
     /* Configure IO functionalities for SD pin */
     SD_IO_Init();
@@ -300,7 +301,7 @@ uint8_t BSP_SD_Init(void) {
     uint8_t res = SD_GoIdleState();
 
     /* Init to maximum fastest speed */
-    SD_SPI_Fast_Init();
+    SD_SPI_Reconfigure_Fast();
 
     /* SD initialized and set to SPI mode properly */
     return res;

firmware/targets/f2/Src/main.c

@@ -88,7 +88,6 @@ int main(void)
   SystemClock_Config();
 
   /* USER CODE BEGIN SysInit */
-
   /* USER CODE END SysInit */
 
   /* Initialize all configured peripherals */

firmware/targets/f2/Src/spi.c

@@ -175,6 +175,101 @@ void HAL_SPI_MspDeInit(SPI_HandleTypeDef* spiHandle)
 
 /* USER CODE BEGIN 1 */
 
+void NFC_SPI_Reconfigure() {
+  if (HAL_SPI_DeInit(&SPI_R) != HAL_OK) {
+      Error_Handler();
+  }
+
+  SPI_R.Init.Mode = SPI_MODE_MASTER;
+  SPI_R.Init.Direction = SPI_DIRECTION_2LINES;
+  SPI_R.Init.DataSize = SPI_DATASIZE_8BIT;
+  SPI_R.Init.CLKPolarity = SPI_POLARITY_LOW;
+  SPI_R.Init.CLKPhase = SPI_PHASE_2EDGE;
+  SPI_R.Init.NSS = SPI_NSS_SOFT;
+  SPI_R.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_64;
+  SPI_R.Init.FirstBit = SPI_FIRSTBIT_MSB;
+  SPI_R.Init.TIMode = SPI_TIMODE_DISABLE;
+  SPI_R.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE;
+  SPI_R.Init.CRCPolynomial = 7;
+  SPI_R.Init.CRCLength = SPI_CRC_LENGTH_DATASIZE;
+  SPI_R.Init.NSSPMode = SPI_NSS_PULSE_DISABLE;
+
+  if (HAL_SPI_Init(&SPI_R) != HAL_OK) {
+      Error_Handler();
+  }
+}
+
+void SD_SPI_Reconfigure_Slow(void) {
+  if (HAL_SPI_DeInit(&SPI_SD_HANDLE) != HAL_OK) {
+      Error_Handler();
+  }
+
+  SPI_SD_HANDLE.Init.Mode = SPI_MODE_MASTER;
+  SPI_SD_HANDLE.Init.Direction = SPI_DIRECTION_2LINES;
+  SPI_SD_HANDLE.Init.DataSize = SPI_DATASIZE_8BIT;
+  SPI_SD_HANDLE.Init.CLKPolarity = SPI_POLARITY_LOW;
+  SPI_SD_HANDLE.Init.CLKPhase = SPI_PHASE_1EDGE;
+  SPI_SD_HANDLE.Init.NSS = SPI_NSS_SOFT;
+  SPI_SD_HANDLE.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_256;
+  SPI_SD_HANDLE.Init.FirstBit = SPI_FIRSTBIT_MSB;
+  SPI_SD_HANDLE.Init.TIMode = SPI_TIMODE_DISABLE;
+  SPI_SD_HANDLE.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE;
+  SPI_SD_HANDLE.Init.CRCPolynomial = 7;
+  SPI_SD_HANDLE.Init.CRCLength = SPI_CRC_LENGTH_DATASIZE;
+  SPI_SD_HANDLE.Init.NSSPMode = SPI_NSS_PULSE_ENABLE;
+
+  if(HAL_SPI_Init(&SPI_SD_HANDLE) != HAL_OK) {
+      Error_Handler();
+  }
+}
+
+void SD_SPI_Reconfigure_Fast(void) {
+  if (HAL_SPI_DeInit(&SPI_SD_HANDLE) != HAL_OK) {
+      Error_Handler();
+  }
+
+  SPI_SD_HANDLE.Init.Mode = SPI_MODE_MASTER;
+  SPI_SD_HANDLE.Init.Direction = SPI_DIRECTION_2LINES;
+  SPI_SD_HANDLE.Init.DataSize = SPI_DATASIZE_8BIT;
+  SPI_SD_HANDLE.Init.CLKPolarity = SPI_POLARITY_LOW;
+  SPI_SD_HANDLE.Init.CLKPhase = SPI_PHASE_1EDGE;
+  SPI_SD_HANDLE.Init.NSS = SPI_NSS_SOFT;
+  SPI_SD_HANDLE.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_2;
+  SPI_SD_HANDLE.Init.FirstBit = SPI_FIRSTBIT_MSB;
+  SPI_SD_HANDLE.Init.TIMode = SPI_TIMODE_DISABLE;
+  SPI_SD_HANDLE.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE;
+  SPI_SD_HANDLE.Init.CRCPolynomial = 7;
+  SPI_SD_HANDLE.Init.CRCLength = SPI_CRC_LENGTH_DATASIZE;
+  SPI_SD_HANDLE.Init.NSSPMode = SPI_NSS_PULSE_ENABLE;
+
+  if(HAL_SPI_Init(&SPI_SD_HANDLE) != HAL_OK) {
+      Error_Handler();
+  }
+}
+
+void CC1101_SPI_Reconfigure(void) {
+  if(HAL_SPI_DeInit(&SPI_R) != HAL_OK) {
+      Error_Handler();
+  }
+
+  SPI_R.Init.Mode = SPI_MODE_MASTER;
+  SPI_R.Init.Direction = SPI_DIRECTION_2LINES;
+  SPI_R.Init.DataSize = SPI_DATASIZE_8BIT;
+  SPI_R.Init.CLKPolarity = SPI_POLARITY_LOW;
+  SPI_R.Init.CLKPhase = SPI_PHASE_1EDGE;
+  SPI_R.Init.NSS = SPI_NSS_SOFT;
+  SPI_R.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_64;
+  SPI_R.Init.FirstBit = SPI_FIRSTBIT_MSB;
+  SPI_R.Init.TIMode = SPI_TIMODE_DISABLE;
+  SPI_R.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE;
+  SPI_R.Init.CRCPolynomial = 7;
+  SPI_R.Init.CRCLength = SPI_CRC_LENGTH_DATASIZE;
+  SPI_R.Init.NSSPMode = SPI_NSS_PULSE_DISABLE;
+
+  if(HAL_SPI_Init(&SPI_R) != HAL_OK) {
+      Error_Handler();
+  }
+}
 /* USER CODE END 1 */
 
 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

firmware/targets/f2/api-hal/api-hal-pwm.c

@@ -41,3 +41,11 @@ void hal_pwm_stop(TIM_HandleTypeDef* tim, uint32_t channel) {
 void hal_pwmn_stop(TIM_HandleTypeDef* tim, uint32_t channel) {
     HAL_TIMEx_PWMN_Stop(tim, channel);
 }
+
+void irda_pwm_set(float value, float freq){
+    hal_pwm_set(value, freq, &IRDA_TIM, IRDA_CH);
+}
+
+void irda_pwm_stop(){
+    hal_pwm_stop(&IRDA_TIM, IRDA_CH);
+}

firmware/targets/f2/api-hal/api-hal-pwm.h

@@ -6,3 +6,6 @@ void hal_pwm_set(float value, float freq, TIM_HandleTypeDef* tim, uint32_t chann
 void hal_pwmn_set(float value, float freq, TIM_HandleTypeDef* tim, uint32_t channel);
 void hal_pwm_stop(TIM_HandleTypeDef* tim, uint32_t channel);
 void hal_pwmn_stop(TIM_HandleTypeDef* tim, uint32_t channel);
+
+void irda_pwm_set(float value, float freq);
+void irda_pwm_stop();

firmware/targets/f2/api-hal/api-hal-resources.c

@@ -1,22 +1,18 @@
-#ifndef __INPUT_PRIV_H
-#define __INPUT_PRIV_H
-
 #include "main.h"
 #include "flipper_v2.h"
 
 #define DEBOUNCE_TICKS 10
 
-const GpioPin input_gpio[] = {
+const GpioPin input_gpio[GPIO_INPUT_PINS_COUNT] = {
     {BUTTON_UP_GPIO_Port, BUTTON_UP_Pin},
     {BUTTON_DOWN_GPIO_Port, BUTTON_DOWN_Pin},
     {BUTTON_RIGHT_GPIO_Port, BUTTON_RIGHT_Pin},
     {BUTTON_LEFT_GPIO_Port, BUTTON_LEFT_Pin},
     {BUTTON_OK_GPIO_Port, BUTTON_OK_Pin},
     {BUTTON_BACK_GPIO_Port, BUTTON_BACK_Pin},
-    {CHRG_GPIO_Port, CHRG_Pin}
-};
+    {CHRG_GPIO_Port, CHRG_Pin}};
 
-const bool input_invert[] = {
+const bool input_invert[GPIO_INPUT_PINS_COUNT] = {
     false, // {BUTTON_UP_GPIO_Port, BUTTON_UP_Pin},
     false, // {BUTTON_DOWN_GPIO_Port, BUTTON_DOWN_Pin},
     false, // {BUTTON_RIGHT_GPIO_Port, BUTTON_RIGHT_Pin},
@@ -26,4 +22,9 @@ const bool input_invert[] = {
     true, // {CHRG_GPIO_Port, CHRG_Pin}
 };
 
-#endif /* __INPUT_PRIV_H */
+const GpioPin led_gpio[3] = {
+    {LED_RED_GPIO_Port, LED_RED_Pin},
+    {LED_GREEN_GPIO_Port, LED_GREEN_Pin},
+    {LED_BLUE_GPIO_Port, LED_BLUE_Pin}};
+
+const GpioPin backlight_gpio = {DISPLAY_BACKLIGHT_GPIO_Port, DISPLAY_BACKLIGHT_Pin};

firmware/targets/f2/api-hal/api-hal-resources.h

@@ -0,0 +1,12 @@
+#pragma once
+#include "main.h"
+#include "flipper_v2.h"
+
+#define DEBOUNCE_TICKS 10
+#define GPIO_INPUT_PINS_COUNT 7
+
+extern const GpioPin input_gpio[GPIO_INPUT_PINS_COUNT];
+extern const bool input_invert[GPIO_INPUT_PINS_COUNT];
+
+extern const GpioPin led_gpio[3];
+extern const GpioPin backlight_gpio;

firmware/targets/f2/cube.ioc

@@ -1,506 +1,506 @@
 #MicroXplorer Configuration settings - do not modify
-PB13.GPIOParameters=GPIO_Label
-PC7.GPIOParameters=GPIO_ModeDefaultPP,GPIO_Speed,GPIO_PuPd,GPIO_Label
-PA15\ (JTDI).GPIOParameters=PinState,GPIO_Label
-RCC.USART1Freq_Value=64000000
-TIM8.ICPolarity_CH2=TIM_INPUTCHANNELPOLARITY_BOTHEDGE
-SPI3.Direction=SPI_DIRECTION_2LINES
-PC10.GPIO_PuPd=GPIO_PULLDOWN
-SPI3.VirtualType=VM_MASTER
-SPI1.VirtualType=VM_MASTER
-VP_ADC1_TempSens_Input.Mode=IN-TempSens
-PC12.Locked=true
-SH.GPXTI9.0=GPIO_EXTI9
-PC12.Signal=SPI3_MOSI
-PB14.GPIO_Label=LED_GREEN
-PC7.Locked=true
-PA13\ (JTMS-SWDIO).Locked=true
-PC6.GPIO_Label=VIBRO
-PC3.Locked=true
-PA3.GPIOParameters=GPIO_Label
-PB6.GPIO_Label=DISPLAY_BACKLIGHT
-PA15\ (JTDI).Signal=GPIO_Output
-PC15-OSC32_OUT\ (PC15).Mode=LSE-External-Oscillator
-PC5.Mode=INP
-USART1.IPParameters=VirtualMode-Asynchronous
-PB13.Signal=TIM15_CH1N
-VP_TIM8_VS_ClockSourceINT.Signal=TIM8_VS_ClockSourceINT
-PA2.GPIOParameters=GPIO_Label
-PinOutPanel.RotationAngle=0
-RCC.MCO1PinFreq_Value=64000000
-RCC.SYSCLKSource=RCC_SYSCLKSOURCE_PLLCLK
-TIM15.Channel-Output\ Compare1\ CH1N=TIM_CHANNEL_1
-PC14-OSC32_IN\ (PC14).Mode=LSE-External-Oscillator
-SH.GPXTI13.0=GPIO_EXTI13
-PA14\ (JTCK-SWCLK).Signal=SYS_JTCK-SWCLK
-RCC.LPTIM1Freq_Value=64000000
-NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:false\:false\:false\:false
-NVIC.EXTI1_IRQn=true\:5\:0\:false\:false\:true\:true\:true\:true
-PB4\ (NJTRST).GPIO_ModeDefaultEXTI=GPIO_MODE_IT_RISING_FALLING
-RCC.ADCCLockSelection=RCC_ADCCLKSOURCE_SYSCLK
-SPI1.Direction=SPI_DIRECTION_2LINES
-RCC.APB2TimFreq_Value=64000000
-PB6.Signal=GPIO_Output
-PC7.Signal=S_TIM8_CH2
-SPI1.CalculateBaudRate=4.0 MBits/s
-PC3.Signal=ADCx_IN4
-RCC.SAI2Freq_Value=13714285.714285715
-PA1.GPIO_PuPd=GPIO_PULLDOWN
-RCC.PREFETCH_ENABLE=1
-PB13.Locked=true
-RCC.USART3Freq_Value=64000000
-NVIC.EXTI15_10_IRQn=true\:5\:0\:true\:false\:true\:false\:true\:true
-ProjectManager.ProjectBuild=false
-NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
-PA0.Locked=true
-PB2.Signal=GPIO_Analog
-PA8.Locked=true
-PA4.Locked=true
-ProjectManager.FirmwarePackage=STM32Cube FW_L4 V1.16.0
-VP_ADC1_Vref_Input.Mode=IN-Vrefint
-MxDb.Version=DB.6.0.0
-PB0.GPIOParameters=GPIO_PuPd,GPIO_Label,GPIO_ModeDefaultEXTI
-PA1.GPIOParameters=GPIO_PuPd,GPIO_Label,GPIO_ModeDefaultEXTI
-ProjectManager.BackupPrevious=false
-VP_SYS_VS_tim17.Signal=SYS_VS_tim17
-PC4.GPIO_Label=NFC_CS
-PB1.GPIO_Speed=GPIO_SPEED_FREQ_MEDIUM
-FREERTOS.HEAP_NUMBER=4
-PB1.GPIO_Label=LED_BLUE
-SPI1.DataSize=SPI_DATASIZE_8BIT
-PC7.GPIO_ModeDefaultPP=GPIO_MODE_AF_OD
-PA8.Signal=GPIO_Output
-PA8.GPIO_ModeDefaultOutputPP=GPIO_MODE_OUTPUT_OD
-RCC.PLLRCLKFreq_Value=64000000
-SH.ADCx_IN4.ConfNb=1
-PB6.Locked=true
-NVIC.PendSV_IRQn=true\:15\:0\:false\:false\:false\:true\:false\:false
-ProjectManager.HalAssertFull=false
-ADC1.SamplingTime-0\#ChannelRegularConversion=ADC_SAMPLETIME_2CYCLES_5
-PA0.Signal=ADCx_IN5
-PC8.GPIOParameters=GPIO_Label
-Mcu.Package=LQFP64
-PB9.Signal=GPXTI9
-PB1.Signal=GPIO_Output
-PA5.Locked=true
-NVIC.TimeBase=TIM1_TRG_COM_TIM17_IRQn
-SPI3.Mode=SPI_MODE_MASTER
-SH.GPXTI8.0=GPIO_EXTI8
-SH.GPXTI8.ConfNb=1
-NVIC.TimeBaseIP=TIM17
-RCC.LSCOPinFreq_Value=32000
-PA10.Signal=USART1_RX
-PB9.GPIO_PuPd=GPIO_PULLDOWN
-FREERTOS.FootprintOK=true
-RCC.DFSDMFreq_Value=64000000
-PC11.Mode=Full_Duplex_Master
-PB14.GPIOParameters=GPIO_Speed,PinState,GPIO_Label,GPIO_ModeDefaultOutputPP
-NVIC.EXTI2_IRQn=true\:5\:0\:false\:false\:true\:true\:true\:true
-RCC.PLLPoutputFreq_Value=18285714.285714287
-RCC.APB1TimFreq_Value=64000000
-FREERTOS.configGENERATE_RUN_TIME_STATS=1
-NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
-RCC.LPUART1Freq_Value=64000000
-USB_OTG_FS.IPParameters=VirtualMode
-PB13.Mode=Output Compare1 CH1N
-PB10.GPIOParameters=GPIO_Label
-PC12.GPIO_PuPd=GPIO_PULLDOWN
-PA13\ (JTMS-SWDIO).Signal=SYS_JTMS-SWDIO
-PA13\ (JTMS-SWDIO).GPIOParameters=GPIO_Label
-PH0-OSC_IN\ (PH0).Mode=HSE-External-Oscillator
-PA8.GPIO_Speed=GPIO_SPEED_FREQ_HIGH
-ProjectManager.CustomerFirmwarePackage=../../../lib/STM32CubeL4
-PC4.GPIOParameters=PinState,GPIO_Label
-PC2.GPIO_ModeDefaultEXTI=GPIO_MODE_IT_RISING_FALLING
-NVIC.EXTI4_IRQn=true\:5\:0\:false\:false\:true\:true\:true\:true
-RCC.PLLQoutputFreq_Value=64000000
-ProjectManager.ProjectFileName=cube.ioc
-FREERTOS.Tasks01=defaultTask,24,1024,StartDefaultTask,Default,NULL,Dynamic,NULL,NULL;app_main,8,128,app,As external,NULL,Dynamic,NULL,NULL
-ADC1.Rank-0\#ChannelRegularConversion=1
-TIM5.IPParameters=Prescaler,Period,Channel-PWM Generation4 CH4,Pulse-PWM Generation4 CH4
-Mcu.PinsNb=58
-PC4.PinState=GPIO_PIN_SET
-PC11.Locked=true
-VP_SYS_VS_tim17.Mode=TIM17
+ADC1.Channel-0\#ChannelRegularConversion=ADC_CHANNEL_4
 ADC1.IPParameters=Rank-0\#ChannelRegularConversion,Channel-0\#ChannelRegularConversion,SamplingTime-0\#ChannelRegularConversion,OffsetNumber-0\#ChannelRegularConversion,NbrOfConversionFlag,master,NbrOfConversion
-PC13.Locked=true
-ADC1.OffsetNumber-0\#ChannelRegularConversion=ADC_OFFSET_NONE
-PC13.Signal=GPXTI13
-RCC.SWPMI1Freq_Value=64000000
-FREERTOS.configCHECK_FOR_STACK_OVERFLOW=1
-PB8.GPIO_PuPd=GPIO_PULLDOWN
-PC6.Signal=GPIO_Output
-PC2.Signal=GPXTI2
-PB11.GPIO_Label=IR_TX
-PC9.PinState=GPIO_PIN_SET
-SH.GPXTI0.ConfNb=1
-SPI1.CLKPhase=SPI_PHASE_1EDGE
-PC0.Signal=GPIO_Analog
-PB14.Locked=true
-PC11.GPIOParameters=GPIO_PuPd
-SH.S_TIM8_CH2.0=TIM8_CH2,Input_Capture2_from_TI2
-PC3.GPIOParameters=GPIO_Label
-PB8.GPIO_Label=BUTTON_RIGHT
-PA11.Locked=true
-PA8.GPIO_Label=LED_RED
-SH.GPXTI2.ConfNb=1
-Mcu.Pin57=VP_USB_DEVICE_VS_USB_DEVICE_CDC_FS
-PB14.GPIO_Speed=GPIO_SPEED_FREQ_MEDIUM
-Mcu.Pin51=VP_ADC1_TempSens_Input
-Mcu.Pin52=VP_ADC1_Vref_Input
-Mcu.Pin50=PB9
-Mcu.Pin55=VP_SYS_VS_tim17
-Mcu.Pin56=VP_TIM8_VS_ClockSourceINT
-Mcu.Pin53=VP_COMP1_VS_VREFINT12
-Mcu.Pin54=VP_FREERTOS_VS_CMSIS_V2
-PC6.Locked=true
-PA9.Signal=USART1_TX
-PB11.GPIOParameters=GPIO_Label
-PB5.Locked=true
-PB9.Locked=true
-VP_TIM8_VS_ClockSourceINT.Mode=Internal
-PC7.GPIO_PuPd=GPIO_NOPULL
-Mcu.Pin48=PB7
-Mcu.Pin49=PB8
-RCC.PLLSAI1PoutputFreq_Value=13714285.714285715
-Mcu.Pin46=PB5
-Mcu.Pin47=PB6
-PB10.Signal=GPIO_Output
-PB14.Signal=GPIO_Output
-RCC.PLLSAI2RoutputFreq_Value=32000000
-PA5.Signal=GPIO_Analog
-Mcu.Pin40=PC10
-Mcu.Pin41=PC11
-PC12.Mode=Full_Duplex_Master
-Mcu.Pin44=PB3 (JTDO-TRACESWO)
-Mcu.Pin45=PB4 (NJTRST)
-Mcu.Pin42=PC12
-Mcu.Pin43=PD2
-ProjectManager.LastFirmware=true
-Mcu.Pin37=PA13 (JTMS-SWDIO)
-Mcu.Pin38=PA14 (JTCK-SWCLK)
-PB15.GPIO_Label=RFID_PULL
-Mcu.Pin35=PA11
-RCC.I2C1Freq_Value=64000000
-Mcu.Pin36=PA12
-SPI1.Mode=SPI_MODE_MASTER
-Mcu.Pin39=PA15 (JTDI)
-PB3\ (JTDO-TRACESWO).Mode=TX_Only_Simplex_Unidirect_Master
-RCC.RNGFreq_Value=48000000
-PC2.GPIOParameters=GPIO_PuPd,GPIO_Label,GPIO_ModeDefaultEXTI
-VP_ADC1_TempSens_Input.Signal=ADC1_TempSens_Input
-Mcu.Pin30=PC8
-PA1.GPIO_Label=BUTTON_DOWN
-Mcu.Pin33=PA9
-Mcu.Pin34=PA10
-Mcu.Pin31=PC9
-SH.ADCx_IN4.0=ADC1_IN4,IN4-Single-Ended
-Mcu.Pin32=PA8
-PA9.Locked=true
-NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
-PC10.GPIOParameters=GPIO_PuPd
-SH.S_TIM5_CH4.ConfNb=1
-ProjectManager.FreePins=false
-PC9.GPIOParameters=PinState,GPIO_Label
-RCC.LPTIM2Freq_Value=64000000
-Mcu.Pin26=PB14
-Mcu.Pin27=PB15
-Mcu.Pin24=PB12
-ProjectManager.UnderRoot=false
-Mcu.Pin25=PB13
-TIM8.Period=32768-1
-Mcu.Pin28=PC6
-PC7.GPIO_Label=iButton
-Mcu.Pin29=PC7
-PA13\ (JTMS-SWDIO).Mode=Serial_Wire
-PA4.Signal=GPIO_Analog
-Mcu.Pin22=PB10
-PB5.Signal=SPI1_MOSI
-Mcu.Pin23=PB11
-Mcu.Pin20=PB1
 ADC1.master=1
-PA3.Locked=true
-Mcu.Pin21=PB2
-PA10.Locked=true
-PA14\ (JTCK-SWCLK).Locked=true
-NVIC.ForceEnableDMAVector=true
-NVIC.MemoryManagement_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
-ProjectManager.CompilerOptimize=6
-PA11.Signal=USB_OTG_FS_DM
-ProjectManager.HeapSize=0x200
-PA0.GPIOParameters=GPIO_Label
-Mcu.Pin15=PA6
-NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
-Mcu.Pin16=PA7
-Mcu.Pin13=PA4
-Mcu.Pin14=PA5
-Mcu.Pin19=PB0
-SH.GPXTI15.ConfNb=1
-ProjectManager.ComputerToolchain=false
-Mcu.Pin17=PC4
-Mcu.Pin18=PC5
-SH.ADCx_IN5.0=ADC1_IN5,IN5-Single-Ended
-NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4
-Mcu.Pin11=PA2
-Mcu.Pin12=PA3
-Mcu.Pin10=PA1
-PC3.GPIO_Label=BATT_V
-RCC.PWRFreq_Value=64000000
-PA15\ (JTDI).PinState=GPIO_PIN_SET
-SH.ADCx_IN5.ConfNb=1
-PB4\ (NJTRST).GPIO_Label=BUTTON_LEFT
-PB1.GPIO_ModeDefaultOutputPP=GPIO_MODE_OUTPUT_OD
-SH.GPXTI1.ConfNb=1
-PD2.Signal=GPIO_Analog
-PB6.GPIO_Speed=GPIO_SPEED_FREQ_LOW
-RCC.I2C2Freq_Value=64000000
-PB0.Signal=GPXTI0
-PB4\ (NJTRST).GPIO_PuPd=GPIO_PULLDOWN
-PC0.Locked=true
-PC1.Signal=GPIO_Analog
+ADC1.NbrOfConversion=1
+ADC1.NbrOfConversionFlag=1
+ADC1.OffsetNumber-0\#ChannelRegularConversion=ADC_OFFSET_NONE
+ADC1.Rank-0\#ChannelRegularConversion=1
+ADC1.SamplingTime-0\#ChannelRegularConversion=ADC_SAMPLETIME_2CYCLES_5
+board=NUCLEO-L476RG
+boardIOC=true
+File.Version=6
+FREERTOS.configCHECK_FOR_STACK_OVERFLOW=1
+FREERTOS.configGENERATE_RUN_TIME_STATS=1
+FREERTOS.configRECORD_STACK_HIGH_ADDRESS=1
+FREERTOS.configTOTAL_HEAP_SIZE=40960
+FREERTOS.configUSE_IDLE_HOOK=1
+FREERTOS.configUSE_TIMERS=1
+FREERTOS.FootprintOK=true
+FREERTOS.HEAP_NUMBER=4
+FREERTOS.IPParameters=Tasks01,configTOTAL_HEAP_SIZE,HEAP_NUMBER,configUSE_TIMERS,configUSE_IDLE_HOOK,FootprintOK,configCHECK_FOR_STACK_OVERFLOW,configRECORD_STACK_HIGH_ADDRESS,configGENERATE_RUN_TIME_STATS
+FREERTOS.Tasks01=defaultTask,24,1024,StartDefaultTask,Default,NULL,Dynamic,NULL,NULL;app_main,8,128,app,As external,NULL,Dynamic,NULL,NULL
+GPIO.groupedBy=Group By Peripherals
+KeepUserPlacement=false
 Mcu.Family=STM32L4
-SH.GPXTI1.0=GPIO_EXTI1
-ProjectManager.MainLocation=Src
-USB_DEVICE.CLASS_NAME_FS=CDC
-RCC.SAI1Freq_Value=13714285.714285715
-RCC.CortexFreq_Value=64000000
-ProjectManager.KeepUserCode=true
-Mcu.UserName=STM32L476RGTx
-PH0-OSC_IN\ (PH0).Signal=RCC_OSC_IN
-PH0-OSC_IN\ (PH0).Locked=true
-PC10.Locked=true
-PC10.Signal=SPI3_SCK
-RCC.PLLSAI1RoutputFreq_Value=48000000
-PA0.GPIO_Label=IR_RX
-ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-SystemClock_Config-RCC-false-HAL-false,3-MX_SPI1_Init-SPI1-false-HAL-true,4-MX_SPI3_Init-SPI3-false-HAL-true,5-MX_ADC1_Init-ADC1-false-HAL-true,6-MX_COMP1_Init-COMP1-false-HAL-true,7-MX_TIM5_Init-TIM5-false-HAL-true,8-MX_TIM15_Init-TIM15-false-HAL-true,9-MX_USART1_UART_Init-USART1-false-HAL-true,10-MX_USB_DEVICE_Init-USB_DEVICE-false-HAL-false,11-MX_TIM8_Init-TIM8-false-HAL-true
-PA11.Mode=Device_Only
-PC9.Locked=true
-TIM5.Pulse-PWM\ Generation4\ CH4=145
-PB0.GPIO_Label=BUTTON_UP
-RCC.USART2Freq_Value=64000000
-PD2.Locked=true
-VP_COMP1_VS_VREFINT12.Signal=COMP1_VS_VREFINT12
-PC13.GPIO_Label=BUTTON_BACK
-PC1.Locked=true
-PB13.GPIO_Label=RFID_OUT
-PB11.Signal=GPIO_Output
-PB15.Signal=GPXTI15
-ProjectManager.StackSize=0x400
-PB3\ (JTDO-TRACESWO).Signal=SPI1_SCK
-VP_FREERTOS_VS_CMSIS_V2.Mode=CMSIS_V2
-SH.GPXTI2.0=GPIO_EXTI2
-RCC.I2C3Freq_Value=64000000
-Mcu.IP4=RCC
-RCC.FCLKCortexFreq_Value=64000000
-Mcu.IP5=SPI1
+Mcu.IP0=ADC1
+Mcu.IP10=TIM15
+Mcu.IP11=USART1
+Mcu.IP12=USB_DEVICE
+Mcu.IP13=USB_OTG_FS
+Mcu.IP1=COMP1
 Mcu.IP2=FREERTOS
 Mcu.IP3=NVIC
-PC11.GPIO_PuPd=GPIO_PULLDOWN
-Mcu.IP0=ADC1
-Mcu.IP1=COMP1
-PA12.Locked=true
-PA12.Signal=USB_OTG_FS_DP
-PB8.GPIO_ModeDefaultEXTI=GPIO_MODE_IT_RISING_FALLING
-SPI1.CLKPolarity=SPI_POLARITY_LOW
-Mcu.UserConstants=
-RCC.VCOSAI1OutputFreq_Value=96000000
-SPI3.CLKPolarity=SPI_POLARITY_LOW
-RCC.SDMMCFreq_Value=48000000
-PA14\ (JTCK-SWCLK).GPIOParameters=GPIO_Label
-SH.GPXTI13.ConfNb=1
-Mcu.ThirdPartyNb=0
-RCC.HCLKFreq_Value=64000000
+Mcu.IP4=RCC
+Mcu.IP5=SPI1
+Mcu.IP6=SPI3
+Mcu.IP7=SYS
+Mcu.IP8=TIM5
+Mcu.IP9=TIM8
 Mcu.IPNb=14
-ProjectManager.PreviousToolchain=
-PA8.GPIOParameters=GPIO_Speed,PinState,GPIO_Label,GPIO_ModeDefaultOutputPP
+Mcu.Name=STM32L476R(C-E-G)Tx
+Mcu.Package=LQFP64
+Mcu.Pin0=PC13
+Mcu.Pin10=PA1
+Mcu.Pin11=PA2
+Mcu.Pin12=PA3
+Mcu.Pin13=PA4
+Mcu.Pin14=PA5
+Mcu.Pin15=PA6
+Mcu.Pin16=PA7
+Mcu.Pin17=PC4
+Mcu.Pin18=PC5
+Mcu.Pin19=PB0
+Mcu.Pin1=PC14-OSC32_IN (PC14)
+Mcu.Pin20=PB1
+Mcu.Pin21=PB2
+Mcu.Pin22=PB10
+Mcu.Pin23=PB11
+Mcu.Pin24=PB12
+Mcu.Pin25=PB13
+Mcu.Pin26=PB14
+Mcu.Pin27=PB15
+Mcu.Pin28=PC6
+Mcu.Pin29=PC7
+Mcu.Pin2=PC15-OSC32_OUT (PC15)
+Mcu.Pin30=PC8
+Mcu.Pin31=PC9
+Mcu.Pin32=PA8
+Mcu.Pin33=PA9
+Mcu.Pin34=PA10
+Mcu.Pin35=PA11
+Mcu.Pin36=PA12
+Mcu.Pin37=PA13 (JTMS-SWDIO)
+Mcu.Pin38=PA14 (JTCK-SWCLK)
+Mcu.Pin39=PA15 (JTDI)
+Mcu.Pin3=PH0-OSC_IN (PH0)
+Mcu.Pin40=PC10
+Mcu.Pin41=PC11
+Mcu.Pin42=PC12
+Mcu.Pin43=PD2
+Mcu.Pin44=PB3 (JTDO-TRACESWO)
+Mcu.Pin45=PB4 (NJTRST)
+Mcu.Pin46=PB5
+Mcu.Pin47=PB6
+Mcu.Pin48=PB7
+Mcu.Pin49=PB8
+Mcu.Pin4=PH1-OSC_OUT (PH1)
+Mcu.Pin50=PB9
+Mcu.Pin51=VP_ADC1_TempSens_Input
+Mcu.Pin52=VP_ADC1_Vref_Input
+Mcu.Pin53=VP_COMP1_VS_VREFINT12
+Mcu.Pin54=VP_FREERTOS_VS_CMSIS_V2
+Mcu.Pin55=VP_SYS_VS_tim17
+Mcu.Pin56=VP_TIM8_VS_ClockSourceINT
+Mcu.Pin57=VP_USB_DEVICE_VS_USB_DEVICE_CDC_FS
+Mcu.Pin5=PC0
 Mcu.Pin6=PC1
-PB9.GPIO_ModeDefaultEXTI=GPIO_MODE_IT_RISING_FALLING
 Mcu.Pin7=PC2
 Mcu.Pin8=PC3
 Mcu.Pin9=PA0
-FREERTOS.IPParameters=Tasks01,configTOTAL_HEAP_SIZE,HEAP_NUMBER,configUSE_TIMERS,configUSE_IDLE_HOOK,FootprintOK,configCHECK_FOR_STACK_OVERFLOW,configRECORD_STACK_HIGH_ADDRESS,configGENERATE_RUN_TIME_STATS
-RCC.AHBFreq_Value=64000000
-Mcu.Pin0=PC13
-SPI3.DataSize=SPI_DATASIZE_8BIT
-Mcu.Pin1=PC14-OSC32_IN (PC14)
-TIM8.IPParameters=Channel-Input_Capture2_from_TI2,ICPolarity_CH2,Prescaler,Period
-GPIO.groupedBy=Group By Peripherals
-Mcu.Pin2=PC15-OSC32_OUT (PC15)
-Mcu.Pin3=PH0-OSC_IN (PH0)
-Mcu.Pin4=PH1-OSC_OUT (PH1)
-Mcu.Pin5=PC0
-ADC1.Channel-0\#ChannelRegularConversion=ADC_CHANNEL_4
-PH1-OSC_OUT\ (PH1).Mode=HSE-External-Oscillator
-RCC.HSE_VALUE=16000000
-FREERTOS.configUSE_TIMERS=1
+Mcu.PinsNb=58
+Mcu.ThirdPartyNb=0
+Mcu.UserConstants=
+Mcu.UserName=STM32L476RGTx
+MxCube.Version=6.0.1
+MxDb.Version=DB.6.0.0
+NVIC.BusFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
 NVIC.DebugMonitor_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
-Mcu.IP10=TIM15
+NVIC.EXTI0_IRQn=true\:5\:0\:false\:false\:true\:true\:true\:true
+NVIC.EXTI15_10_IRQn=true\:5\:0\:true\:false\:true\:false\:true\:true
+NVIC.EXTI1_IRQn=true\:5\:0\:false\:false\:true\:true\:true\:true
+NVIC.EXTI2_IRQn=true\:5\:0\:false\:false\:true\:true\:true\:true
+NVIC.EXTI4_IRQn=true\:5\:0\:false\:false\:true\:true\:true\:true
+NVIC.EXTI9_5_IRQn=true\:5\:0\:false\:false\:true\:true\:true\:true
+NVIC.ForceEnableDMAVector=true
+NVIC.HardFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
+NVIC.MemoryManagement_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
+NVIC.NonMaskableInt_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
+NVIC.OTG_FS_IRQn=true\:5\:0\:false\:false\:true\:true\:false\:true
+NVIC.PendSV_IRQn=true\:15\:0\:false\:false\:false\:true\:false\:false
+NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4
+NVIC.SavedPendsvIrqHandlerGenerated=true
+NVIC.SavedSvcallIrqHandlerGenerated=true
+NVIC.SavedSystickIrqHandlerGenerated=true
+NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:false\:false\:false\:false
 NVIC.SysTick_IRQn=true\:15\:0\:false\:false\:false\:true\:true\:false
-Mcu.IP12=USB_DEVICE
-Mcu.IP11=USART1
-PB0.GPIO_ModeDefaultEXTI=GPIO_MODE_IT_RISING_FALLING
 NVIC.TIM1_TRG_COM_TIM17_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:true
-Mcu.IP13=USB_OTG_FS
-RCC.VCOInputFreq_Value=8000000
-TIM5.Channel-PWM\ Generation4\ CH4=TIM_CHANNEL_4
-PB5.Mode=TX_Only_Simplex_Unidirect_Master
-File.Version=6
-PC13.GPIO_PuPd=GPIO_PULLDOWN
-PB7.Signal=GPIO_Input
-PB8.Locked=true
-PB6.GPIOParameters=GPIO_Speed,GPIO_Label
-PB0.Locked=true
-FREERTOS.configTOTAL_HEAP_SIZE=40960
-VP_COMP1_VS_VREFINT12.Mode=VREFINT_12
-ProjectManager.ProjectName=cube
-PB1.PinState=GPIO_PIN_SET
-PB7.GPIO_Label=CC1101_G0
-PB4\ (NJTRST).Locked=true
+NVIC.TIM8_CC_IRQn=true\:5\:0\:false\:false\:true\:true\:true\:true
+NVIC.TimeBase=TIM1_TRG_COM_TIM17_IRQn
+NVIC.TimeBaseIP=TIM17
+NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false\:false
+PA0.GPIOParameters=GPIO_Label
+PA0.GPIO_Label=IR_RX
+PA0.Locked=true
+PA0.Signal=ADCx_IN5
+PA1.GPIOParameters=GPIO_PuPd,GPIO_Label,GPIO_ModeDefaultEXTI
+PA1.GPIO_Label=BUTTON_DOWN
+PA1.GPIO_ModeDefaultEXTI=GPIO_MODE_IT_RISING_FALLING
+PA1.GPIO_PuPd=GPIO_PULLDOWN
+PA1.Locked=true
+PA1.Signal=GPXTI1
+PA10.Locked=true
+PA10.Mode=Asynchronous
+PA10.Signal=USART1_RX
+PA11.Locked=true
+PA11.Mode=Device_Only
+PA11.Signal=USB_OTG_FS_DM
+PA12.Locked=true
+PA12.Mode=Device_Only
+PA12.Signal=USB_OTG_FS_DP
+PA13\ (JTMS-SWDIO).GPIOParameters=GPIO_Label
+PA13\ (JTMS-SWDIO).GPIO_Label=TMS
+PA13\ (JTMS-SWDIO).Locked=true
+PA13\ (JTMS-SWDIO).Mode=Serial_Wire
+PA13\ (JTMS-SWDIO).Signal=SYS_JTMS-SWDIO
+PA14\ (JTCK-SWCLK).GPIOParameters=GPIO_Label
+PA14\ (JTCK-SWCLK).GPIO_Label=TCK
+PA14\ (JTCK-SWCLK).Locked=true
+PA14\ (JTCK-SWCLK).Mode=Serial_Wire
+PA14\ (JTCK-SWCLK).Signal=SYS_JTCK-SWCLK
+PA15\ (JTDI).GPIOParameters=PinState,GPIO_Label
+PA15\ (JTDI).GPIO_Label=CC1101_CS
+PA15\ (JTDI).Locked=true
+PA15\ (JTDI).PinState=GPIO_PIN_SET
+PA15\ (JTDI).Signal=GPIO_Output
+PA2.GPIOParameters=GPIO_Label
+PA2.GPIO_Label=DISPLAY_DI
+PA2.Locked=true
+PA2.Signal=GPIO_Output
+PA3.GPIOParameters=GPIO_Label
+PA3.GPIO_Label=SPEAKER
+PA3.Locked=true
+PA3.Signal=S_TIM5_CH4
+PA4.Locked=true
+PA4.Signal=GPIO_Analog
+PA5.Locked=true
+PA5.Signal=GPIO_Analog
+PA6.Locked=true
 PA6.Signal=GPIO_Analog
 PA7.Locked=true
-PB15.GPIO_PuPd=GPIO_PULLDOWN
-NVIC.OTG_FS_IRQn=true\:5\:0\:false\:false\:true\:true\:false\:true
-ProjectManager.ToolChainLocation=
-PA2.GPIO_Label=DISPLAY_DI
-RCC.LSI_VALUE=32000
-SH.GPXTI0.0=GPIO_EXTI0
-USB_OTG_FS.VirtualMode=Device_Only
-VP_USB_DEVICE_VS_USB_DEVICE_CDC_FS.Signal=USB_DEVICE_VS_USB_DEVICE_CDC_FS
-PC14-OSC32_IN\ (PC14).Locked=true
-TIM8.Prescaler=64-1
-PC4.Locked=true
-SPI3.IPParameters=VirtualType,Mode,Direction,CalculateBaudRate,DataSize,BaudRatePrescaler,CLKPolarity,CLKPhase
-PC5.Signal=COMP1_INP
-SPI1.BaudRatePrescaler=SPI_BAUDRATEPRESCALER_16
-PA1.GPIO_ModeDefaultEXTI=GPIO_MODE_IT_RISING_FALLING
-PC2.GPIO_Label=CHRG
+PA7.Signal=GPIO_Analog
+PA8.GPIOParameters=GPIO_Speed,PinState,GPIO_Label,GPIO_ModeDefaultOutputPP
+PA8.GPIO_Label=LED_RED
+PA8.GPIO_ModeDefaultOutputPP=GPIO_MODE_OUTPUT_OD
+PA8.GPIO_Speed=GPIO_SPEED_FREQ_HIGH
+PA8.Locked=true
 PA8.PinState=GPIO_PIN_SET
-PB15.Locked=true
-PB3\ (JTDO-TRACESWO).Locked=true
-RCC.PLLSAI1N=12
-PA3.Signal=S_TIM5_CH4
-PA2.Locked=true
-RCC.MSI_VALUE=4000000
-RCC.PLLSourceVirtual=RCC_PLLSOURCE_HSE
-PA14\ (JTCK-SWCLK).Mode=Serial_Wire
-PB8.GPIOParameters=GPIO_PuPd,GPIO_Label,GPIO_ModeDefaultEXTI
-PB9.GPIO_Label=BUTTON_OK
-PA10.Mode=Asynchronous
-PC9.GPIO_Label=SD_CS
-ProjectManager.NoMain=false
-SPI1.IPParameters=VirtualType,Mode,Direction,CalculateBaudRate,DataSize,BaudRatePrescaler,CLKPolarity,CLKPhase
-USB_DEVICE.VirtualModeFS=Cdc_FS
-NVIC.SavedSvcallIrqHandlerGenerated=true
-PC11.Signal=SPI3_MISO
-PC8.Signal=GPIO_Output
-PC4.Signal=GPIO_Output
-PC10.Mode=Full_Duplex_Master
-ProjectManager.DefaultFWLocation=false
-PC15-OSC32_OUT\ (PC15).Signal=RCC_OSC32_OUT
-PB12.Locked=true
-PA14\ (JTCK-SWCLK).GPIO_Label=TCK
-ProjectManager.DeletePrevious=true
-PB10.Locked=true
-RCC.VCOSAI2OutputFreq_Value=64000000
-boardIOC=true
-USB_DEVICE.IPParameters=VirtualMode,VirtualModeFS,CLASS_NAME_FS
-RCC.FamilyName=M
-PH1-OSC_OUT\ (PH1).Signal=RCC_OSC_OUT
-PB9.GPIOParameters=GPIO_PuPd,GPIO_Label,GPIO_ModeDefaultEXTI
-PC8.GPIO_Label=DISPLAY_CS
-PC12.GPIOParameters=GPIO_PuPd
-USART1.VirtualMode-Asynchronous=VM_ASYNC
-FREERTOS.configUSE_IDLE_HOOK=1
+PA8.Signal=GPIO_Output
+PA9.Locked=true
 PA9.Mode=Asynchronous
-PB4\ (NJTRST).GPIOParameters=GPIO_PuPd,GPIO_Label,GPIO_ModeDefaultEXTI
-NVIC.TIM8_CC_IRQn=true\:5\:0\:false\:false\:true\:true\:true\:true
-PB14.PinState=GPIO_PIN_SET
-FREERTOS.configRECORD_STACK_HIGH_ADDRESS=1
-ProjectManager.TargetToolchain=Makefile
-PB10.GPIO_Label=DISPLAY_RST
-PB7.GPIOParameters=GPIO_Label
-VP_USB_DEVICE_VS_USB_DEVICE_CDC_FS.Mode=CDC_FS
-PC5.GPIOParameters=GPIO_Label
-PC2.Locked=true
-ProjectManager.RegisterCallBack=
-PC15-OSC32_OUT\ (PC15).Locked=true
-RCC.USBFreq_Value=48000000
-TIM15.IPParameters=Channel-Output Compare1 CH1N
-PB14.GPIO_ModeDefaultOutputPP=GPIO_MODE_OUTPUT_OD
-PA1.Signal=GPXTI1
+PA9.Signal=USART1_TX
+PB0.GPIOParameters=GPIO_PuPd,GPIO_Label,GPIO_ModeDefaultEXTI
+PB0.GPIO_Label=BUTTON_UP
+PB0.GPIO_ModeDefaultEXTI=GPIO_MODE_IT_RISING_FALLING
+PB0.GPIO_PuPd=GPIO_PULLDOWN
+PB0.Locked=true
+PB0.Signal=GPXTI0
+PB1.GPIOParameters=GPIO_Speed,PinState,GPIO_Label,GPIO_ModeDefaultOutputPP
+PB1.GPIO_Label=LED_BLUE
+PB1.GPIO_ModeDefaultOutputPP=GPIO_MODE_OUTPUT_OD
+PB1.GPIO_Speed=GPIO_SPEED_FREQ_MEDIUM
 PB1.Locked=true
-PB15.GPIO_ModeDefaultEXTI=GPIO_MODE_IT_RISING
-PH1-OSC_OUT\ (PH1).Locked=true
-board=NUCLEO-L476RG
-SPI3.CLKPhase=SPI_PHASE_2EDGE
-PC7.GPIO_Speed=GPIO_SPEED_FREQ_MEDIUM
-RCC.VCOOutputFreq_Value=128000000
-NVIC.SavedSystickIrqHandlerGenerated=true
-RCC.APB2Freq_Value=64000000
-RCC.UART4Freq_Value=64000000
-SPI3.CalculateBaudRate=1000.0 KBits/s
-MxCube.Version=6.0.1
-PA13\ (JTMS-SWDIO).GPIO_Label=TMS
-PC13.GPIOParameters=GPIO_PuPd,GPIO_Label,GPIO_ModeDefaultEXTI
-RCC.PLLSAI1QoutputFreq_Value=48000000
-RCC.ADCFreq_Value=64000000
-SPI3.BaudRatePrescaler=SPI_BAUDRATEPRESCALER_64
-VP_ADC1_Vref_Input.Signal=ADC1_Vref_Input
-SH.S_TIM5_CH4.0=TIM5_CH4,PWM Generation4 CH4
-PC2.GPIO_PuPd=GPIO_PULLUP
-RCC.UART5Freq_Value=64000000
+PB1.PinState=GPIO_PIN_SET
+PB1.Signal=GPIO_Output
+PB10.GPIOParameters=GPIO_Label
+PB10.GPIO_Label=DISPLAY_RST
+PB10.Locked=true
+PB10.Signal=GPIO_Output
+PB11.GPIOParameters=GPIO_Label
+PB11.GPIO_Label=IR_TX
+PB11.Locked=true
+PB11.Signal=GPIO_Output
+PB12.Locked=true
+PB12.Signal=GPIO_Analog
+PB13.GPIOParameters=GPIO_Label
+PB13.GPIO_Label=RFID_OUT
+PB13.Locked=true
+PB13.Mode=Output Compare1 CH1N
+PB13.Signal=TIM15_CH1N
+PB14.GPIOParameters=GPIO_Speed,PinState,GPIO_Label,GPIO_ModeDefaultOutputPP
+PB14.GPIO_Label=LED_GREEN
+PB14.GPIO_ModeDefaultOutputPP=GPIO_MODE_OUTPUT_OD
+PB14.GPIO_Speed=GPIO_SPEED_FREQ_MEDIUM
+PB14.Locked=true
+PB14.PinState=GPIO_PIN_SET
+PB14.Signal=GPIO_Output
 PB15.GPIOParameters=GPIO_PuPd,GPIO_Label,GPIO_ModeDefaultEXTI
-ADC1.NbrOfConversion=1
-PA15\ (JTDI).GPIO_Label=CC1101_CS
-RCC.IPParameters=ADCCLockSelection,ADCFreq_Value,AHBFreq_Value,APB1Freq_Value,APB1TimFreq_Value,APB2Freq_Value,APB2TimFreq_Value,CortexFreq_Value,DFSDMFreq_Value,FCLKCortexFreq_Value,FamilyName,HCLKFreq_Value,HSE_VALUE,HSI_VALUE,I2C1Freq_Value,I2C2Freq_Value,I2C3Freq_Value,LPTIM1Freq_Value,LPTIM2Freq_Value,LPUART1Freq_Value,LSCOPinFreq_Value,LSI_VALUE,MCO1PinFreq_Value,MSI_VALUE,PLLM,PLLN,PLLPoutputFreq_Value,PLLQoutputFreq_Value,PLLRCLKFreq_Value,PLLSAI1N,PLLSAI1PoutputFreq_Value,PLLSAI1QoutputFreq_Value,PLLSAI1RoutputFreq_Value,PLLSAI2PoutputFreq_Value,PLLSAI2RoutputFreq_Value,PLLSourceVirtual,PREFETCH_ENABLE,PWRFreq_Value,RNGFreq_Value,SAI1Freq_Value,SAI2Freq_Value,SDMMCFreq_Value,SWPMI1Freq_Value,SYSCLKFreq_VALUE,SYSCLKSource,UART4Freq_Value,UART5Freq_Value,USART1Freq_Value,USART2Freq_Value,USART3Freq_Value,USBFreq_Value,VCOInputFreq_Value,VCOOutputFreq_Value,VCOSAI1OutputFreq_Value,VCOSAI2OutputFreq_Value
-ProjectManager.AskForMigrate=true
-Mcu.Name=STM32L476R(C-E-G)Tx
-NVIC.SavedPendsvIrqHandlerGenerated=true
-PA2.Signal=GPIO_Output
+PB15.GPIO_Label=RFID_PULL
+PB15.GPIO_ModeDefaultEXTI=GPIO_MODE_IT_RISING
+PB15.GPIO_PuPd=GPIO_PULLDOWN
+PB15.Locked=true
+PB15.Signal=GPXTI15
 PB2.Locked=true
-Mcu.IP8=TIM5
-VP_FREERTOS_VS_CMSIS_V2.Signal=FREERTOS_VS_CMSIS_V2
-Mcu.IP9=TIM8
-Mcu.IP6=SPI3
-Mcu.IP7=SYS
-ProjectManager.CoupleFile=true
-NVIC.EXTI0_IRQn=true\:5\:0\:false\:false\:true\:true\:true\:true
-RCC.SYSCLKFreq_VALUE=64000000
-PA1.Locked=true
-PA12.Mode=Device_Only
-SH.GPXTI4.0=GPIO_EXTI4
-RCC.PLLSAI2PoutputFreq_Value=9142857.142857144
-KeepUserPlacement=false
-TIM5.Prescaler=500 - 1
+PB2.Signal=GPIO_Analog
+PB3\ (JTDO-TRACESWO).Locked=true
+PB3\ (JTDO-TRACESWO).Mode=TX_Only_Simplex_Unidirect_Master
+PB3\ (JTDO-TRACESWO).Signal=SPI1_SCK
+PB4\ (NJTRST).GPIOParameters=GPIO_PuPd,GPIO_Label,GPIO_ModeDefaultEXTI
+PB4\ (NJTRST).GPIO_Label=BUTTON_LEFT
+PB4\ (NJTRST).GPIO_ModeDefaultEXTI=GPIO_MODE_IT_RISING_FALLING
+PB4\ (NJTRST).GPIO_PuPd=GPIO_PULLDOWN
+PB4\ (NJTRST).Locked=true
+PB4\ (NJTRST).Signal=GPXTI4
+PB5.Locked=true
+PB5.Mode=TX_Only_Simplex_Unidirect_Master
+PB5.Signal=SPI1_MOSI
+PB6.GPIOParameters=GPIO_Speed,GPIO_Label
+PB6.GPIO_Label=DISPLAY_BACKLIGHT
+PB6.GPIO_Speed=GPIO_SPEED_FREQ_LOW
+PB6.Locked=true
+PB6.Signal=GPIO_Output
+PB7.GPIOParameters=GPIO_Label
+PB7.GPIO_Label=CC1101_G0
+PB7.Locked=true
+PB7.Signal=GPIO_Input
+PB8.GPIOParameters=GPIO_PuPd,GPIO_Label,GPIO_ModeDefaultEXTI
+PB8.GPIO_Label=BUTTON_RIGHT
+PB8.GPIO_ModeDefaultEXTI=GPIO_MODE_IT_RISING_FALLING
+PB8.GPIO_PuPd=GPIO_PULLDOWN
+PB8.Locked=true
+PB8.Signal=GPXTI8
+PB9.GPIOParameters=GPIO_PuPd,GPIO_Label,GPIO_ModeDefaultEXTI
+PB9.GPIO_Label=BUTTON_OK
+PB9.GPIO_ModeDefaultEXTI=GPIO_MODE_IT_RISING_FALLING
+PB9.GPIO_PuPd=GPIO_PULLDOWN
+PB9.Locked=true
+PB9.Signal=GPXTI9
+PC0.Locked=true
+PC0.Signal=GPIO_Analog
+PC1.Locked=true
+PC1.Signal=GPIO_Analog
+PC10.GPIOParameters=GPIO_PuPd
+PC10.GPIO_PuPd=GPIO_PULLDOWN
+PC10.Locked=true
+PC10.Mode=Full_Duplex_Master
+PC10.Signal=SPI3_SCK
+PC11.GPIOParameters=GPIO_PuPd
+PC11.GPIO_PuPd=GPIO_PULLDOWN
+PC11.Locked=true
+PC11.Mode=Full_Duplex_Master
+PC11.Signal=SPI3_MISO
+PC12.GPIOParameters=GPIO_PuPd
+PC12.GPIO_PuPd=GPIO_PULLDOWN
+PC12.Locked=true
+PC12.Mode=Full_Duplex_Master
+PC12.Signal=SPI3_MOSI
+PC13.GPIOParameters=GPIO_PuPd,GPIO_Label,GPIO_ModeDefaultEXTI
+PC13.GPIO_Label=BUTTON_BACK
 PC13.GPIO_ModeDefaultEXTI=GPIO_MODE_IT_RISING_FALLING
-PC5.GPIO_Label=RFID_RF_IN
+PC13.GPIO_PuPd=GPIO_PULLDOWN
+PC13.Locked=true
+PC13.Signal=GPXTI13
+PC14-OSC32_IN\ (PC14).Locked=true
+PC14-OSC32_IN\ (PC14).Mode=LSE-External-Oscillator
 PC14-OSC32_IN\ (PC14).Signal=RCC_OSC32_IN
-SH.GPXTI9.ConfNb=1
-NVIC.EXTI9_5_IRQn=true\:5\:0\:false\:false\:true\:true\:true\:true
-SH.GPXTI4.ConfNb=1
+PC15-OSC32_OUT\ (PC15).Locked=true
+PC15-OSC32_OUT\ (PC15).Mode=LSE-External-Oscillator
+PC15-OSC32_OUT\ (PC15).Signal=RCC_OSC32_OUT
+PC2.GPIOParameters=GPIO_PuPd,GPIO_Label,GPIO_ModeDefaultEXTI
+PC2.GPIO_Label=CHRG
+PC2.GPIO_ModeDefaultEXTI=GPIO_MODE_IT_RISING_FALLING
+PC2.GPIO_PuPd=GPIO_PULLUP
+PC2.Locked=true
+PC2.Signal=GPXTI2
+PC3.GPIOParameters=GPIO_Label
+PC3.GPIO_Label=BATT_V
+PC3.Locked=true
+PC3.Signal=ADCx_IN4
+PC4.GPIOParameters=PinState,GPIO_Label
+PC4.GPIO_Label=NFC_CS
+PC4.Locked=true
+PC4.PinState=GPIO_PIN_SET
+PC4.Signal=GPIO_Output
+PC5.GPIOParameters=GPIO_Label
+PC5.GPIO_Label=RFID_RF_IN
+PC5.Mode=INP
+PC5.Signal=COMP1_INP
 PC6.GPIOParameters=GPIO_Label
+PC6.GPIO_Label=VIBRO
+PC6.Locked=true
+PC6.Signal=GPIO_Output
+PC7.GPIOParameters=GPIO_ModeDefaultPP,GPIO_Speed,GPIO_PuPd,GPIO_Label
+PC7.GPIO_Label=iButton
+PC7.GPIO_ModeDefaultPP=GPIO_MODE_AF_OD
+PC7.GPIO_PuPd=GPIO_NOPULL
+PC7.GPIO_Speed=GPIO_SPEED_FREQ_MEDIUM
+PC7.Locked=true
+PC7.Signal=S_TIM8_CH2
+PC8.GPIOParameters=GPIO_Label
+PC8.GPIO_Label=DISPLAY_CS
+PC8.Locked=true
+PC8.Signal=GPIO_Output
+PC9.GPIOParameters=PinState,GPIO_Label
+PC9.GPIO_Label=SD_CS
+PC9.Locked=true
+PC9.PinState=GPIO_PIN_SET
+PC9.Signal=GPIO_Output
+PD2.Locked=true
+PD2.Signal=GPIO_Analog
+PH0-OSC_IN\ (PH0).Locked=true
+PH0-OSC_IN\ (PH0).Mode=HSE-External-Oscillator
+PH0-OSC_IN\ (PH0).Signal=RCC_OSC_IN
+PH1-OSC_OUT\ (PH1).Locked=true
+PH1-OSC_OUT\ (PH1).Mode=HSE-External-Oscillator
+PH1-OSC_OUT\ (PH1).Signal=RCC_OSC_OUT
+PinOutPanel.RotationAngle=0
+ProjectManager.AskForMigrate=true
+ProjectManager.BackupPrevious=false
+ProjectManager.CompilerOptimize=6
+ProjectManager.ComputerToolchain=false
+ProjectManager.CoupleFile=true
+ProjectManager.CustomerFirmwarePackage=../../../lib/STM32CubeL4
+ProjectManager.DefaultFWLocation=false
+ProjectManager.DeletePrevious=true
+ProjectManager.DeviceId=STM32L476RGTx
+ProjectManager.FirmwarePackage=STM32Cube FW_L4 V1.16.0
+ProjectManager.FreePins=false
+ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-SystemClock_Config-RCC-false-HAL-false,3-MX_SPI1_Init-SPI1-false-HAL-true,4-MX_SPI3_Init-SPI3-false-HAL-true,5-MX_ADC1_Init-ADC1-false-HAL-true,6-MX_COMP1_Init-COMP1-false-HAL-true,7-MX_TIM5_Init-TIM5-false-HAL-true,8-MX_TIM15_Init-TIM15-false-HAL-true,9-MX_USART1_UART_Init-USART1-false-HAL-true,10-MX_USB_DEVICE_Init-USB_DEVICE-false-HAL-false,11-MX_TIM8_Init-TIM8-false-HAL-true
+ProjectManager.HalAssertFull=false
+ProjectManager.HeapSize=0x200
+ProjectManager.KeepUserCode=true
+ProjectManager.LastFirmware=true
+ProjectManager.LibraryCopy=2
+ProjectManager.MainLocation=Src
+ProjectManager.NoMain=false
+ProjectManager.PreviousToolchain=
+ProjectManager.ProjectBuild=false
+ProjectManager.ProjectFileName=cube.ioc
+ProjectManager.ProjectName=cube
+ProjectManager.RegisterCallBack=
+ProjectManager.StackSize=0x400
+ProjectManager.TargetToolchain=Makefile
+ProjectManager.ToolChainLocation=
+ProjectManager.UnderRoot=false
+RCC.ADCCLockSelection=RCC_ADCCLKSOURCE_SYSCLK
+RCC.ADCFreq_Value=64000000
+RCC.AHBFreq_Value=64000000
+RCC.APB1Freq_Value=64000000
+RCC.APB1TimFreq_Value=64000000
+RCC.APB2Freq_Value=64000000
+RCC.APB2TimFreq_Value=64000000
+RCC.CortexFreq_Value=64000000
+RCC.DFSDMFreq_Value=64000000
+RCC.FamilyName=M
+RCC.FCLKCortexFreq_Value=64000000
+RCC.HCLKFreq_Value=64000000
+RCC.HSE_VALUE=16000000
 RCC.HSI_VALUE=16000000
-ADC1.NbrOfConversionFlag=1
-SH.GPXTI15.0=GPIO_EXTI15
+RCC.I2C1Freq_Value=64000000
+RCC.I2C2Freq_Value=64000000
+RCC.I2C3Freq_Value=64000000
+RCC.IPParameters=ADCCLockSelection,ADCFreq_Value,AHBFreq_Value,APB1Freq_Value,APB1TimFreq_Value,APB2Freq_Value,APB2TimFreq_Value,CortexFreq_Value,DFSDMFreq_Value,FCLKCortexFreq_Value,FamilyName,HCLKFreq_Value,HSE_VALUE,HSI_VALUE,I2C1Freq_Value,I2C2Freq_Value,I2C3Freq_Value,LPTIM1Freq_Value,LPTIM2Freq_Value,LPUART1Freq_Value,LSCOPinFreq_Value,LSI_VALUE,MCO1PinFreq_Value,MSI_VALUE,PLLM,PLLN,PLLPoutputFreq_Value,PLLQoutputFreq_Value,PLLRCLKFreq_Value,PLLSAI1N,PLLSAI1PoutputFreq_Value,PLLSAI1QoutputFreq_Value,PLLSAI1RoutputFreq_Value,PLLSAI2PoutputFreq_Value,PLLSAI2RoutputFreq_Value,PLLSourceVirtual,PREFETCH_ENABLE,PWRFreq_Value,RNGFreq_Value,SAI1Freq_Value,SAI2Freq_Value,SDMMCFreq_Value,SWPMI1Freq_Value,SYSCLKFreq_VALUE,SYSCLKSource,UART4Freq_Value,UART5Freq_Value,USART1Freq_Value,USART2Freq_Value,USART3Freq_Value,USBFreq_Value,VCOInputFreq_Value,VCOOutputFreq_Value,VCOSAI1OutputFreq_Value,VCOSAI2OutputFreq_Value
+RCC.LPTIM1Freq_Value=64000000
+RCC.LPTIM2Freq_Value=64000000
+RCC.LPUART1Freq_Value=64000000
+RCC.LSCOPinFreq_Value=32000
+RCC.LSI_VALUE=32000
+RCC.MCO1PinFreq_Value=64000000
+RCC.MSI_VALUE=4000000
 RCC.PLLM=2
 RCC.PLLN=16
-TIM8.Channel-Input_Capture2_from_TI2=TIM_CHANNEL_2
-PB7.Locked=true
-PB8.Signal=GPXTI8
-PC8.Locked=true
-TIM5.Period=291
-PC9.Signal=GPIO_Output
-PA15\ (JTDI).Locked=true
-RCC.APB1Freq_Value=64000000
-USB_DEVICE.VirtualMode=Cdc
-PB11.Locked=true
-ProjectManager.DeviceId=STM32L476RGTx
+RCC.PLLPoutputFreq_Value=18285714.285714287
+RCC.PLLQoutputFreq_Value=64000000
+RCC.PLLRCLKFreq_Value=64000000
+RCC.PLLSAI1N=12
+RCC.PLLSAI1PoutputFreq_Value=13714285.714285715
+RCC.PLLSAI1QoutputFreq_Value=48000000
+RCC.PLLSAI1RoutputFreq_Value=48000000
+RCC.PLLSAI2PoutputFreq_Value=9142857.142857144
+RCC.PLLSAI2RoutputFreq_Value=32000000
+RCC.PLLSourceVirtual=RCC_PLLSOURCE_HSE
+RCC.PREFETCH_ENABLE=1
+RCC.PWRFreq_Value=64000000
+RCC.RNGFreq_Value=48000000
+RCC.SAI1Freq_Value=13714285.714285715
+RCC.SAI2Freq_Value=13714285.714285715
+RCC.SDMMCFreq_Value=48000000
+RCC.SWPMI1Freq_Value=64000000
+RCC.SYSCLKFreq_VALUE=64000000
+RCC.SYSCLKSource=RCC_SYSCLKSOURCE_PLLCLK
+RCC.UART4Freq_Value=64000000
+RCC.UART5Freq_Value=64000000
+RCC.USART1Freq_Value=64000000
+RCC.USART2Freq_Value=64000000
+RCC.USART3Freq_Value=64000000
+RCC.USBFreq_Value=48000000
+RCC.VCOInputFreq_Value=8000000
+RCC.VCOOutputFreq_Value=128000000
+RCC.VCOSAI1OutputFreq_Value=96000000
+RCC.VCOSAI2OutputFreq_Value=64000000
+SH.ADCx_IN4.0=ADC1_IN4,IN4-Single-Ended
+SH.ADCx_IN4.ConfNb=1
+SH.ADCx_IN5.0=ADC1_IN5,IN5-Single-Ended
+SH.ADCx_IN5.ConfNb=1
+SH.GPXTI0.0=GPIO_EXTI0
+SH.GPXTI0.ConfNb=1
+SH.GPXTI1.0=GPIO_EXTI1
+SH.GPXTI1.ConfNb=1
+SH.GPXTI13.0=GPIO_EXTI13
+SH.GPXTI13.ConfNb=1
+SH.GPXTI15.0=GPIO_EXTI15
+SH.GPXTI15.ConfNb=1
+SH.GPXTI2.0=GPIO_EXTI2
+SH.GPXTI2.ConfNb=1
+SH.GPXTI4.0=GPIO_EXTI4
+SH.GPXTI4.ConfNb=1
+SH.GPXTI8.0=GPIO_EXTI8
+SH.GPXTI8.ConfNb=1
+SH.GPXTI9.0=GPIO_EXTI9
+SH.GPXTI9.ConfNb=1
+SH.S_TIM5_CH4.0=TIM5_CH4,PWM Generation4 CH4
+SH.S_TIM5_CH4.ConfNb=1
+SH.S_TIM8_CH2.0=TIM8_CH2,Input_Capture2_from_TI2
 SH.S_TIM8_CH2.ConfNb=1
-PB12.Signal=GPIO_Analog
-ProjectManager.LibraryCopy=2
-PB0.GPIO_PuPd=GPIO_PULLDOWN
-PA3.GPIO_Label=SPEAKER
-PB1.GPIOParameters=GPIO_Speed,PinState,GPIO_Label,GPIO_ModeDefaultOutputPP
-PA7.Signal=GPIO_Analog
-PB4\ (NJTRST).Signal=GPXTI4
-PA6.Locked=true
+SPI1.BaudRatePrescaler=SPI_BAUDRATEPRESCALER_16
+SPI1.CalculateBaudRate=4.0 MBits/s
+SPI1.CLKPhase=SPI_PHASE_1EDGE
+SPI1.CLKPolarity=SPI_POLARITY_LOW
+SPI1.DataSize=SPI_DATASIZE_8BIT
+SPI1.Direction=SPI_DIRECTION_2LINES
+SPI1.IPParameters=VirtualType,Mode,Direction,CalculateBaudRate,DataSize,BaudRatePrescaler,CLKPolarity,CLKPhase
+SPI1.Mode=SPI_MODE_MASTER
+SPI1.VirtualType=VM_MASTER
+SPI3.BaudRatePrescaler=SPI_BAUDRATEPRESCALER_64
+SPI3.CalculateBaudRate=1000.0 KBits/s
+SPI3.CLKPhase=SPI_PHASE_2EDGE
+SPI3.CLKPolarity=SPI_POLARITY_LOW
+SPI3.DataSize=SPI_DATASIZE_8BIT
+SPI3.Direction=SPI_DIRECTION_2LINES
+SPI3.IPParameters=VirtualType,Mode,Direction,CalculateBaudRate,DataSize,BaudRatePrescaler,CLKPolarity,CLKPhase
+SPI3.Mode=SPI_MODE_MASTER
+SPI3.VirtualType=VM_MASTER
+TIM15.Channel-Output\ Compare1\ CH1N=TIM_CHANNEL_1
+TIM15.IPParameters=Channel-Output Compare1 CH1N
+TIM5.Channel-PWM\ Generation4\ CH4=TIM_CHANNEL_4
+TIM5.IPParameters=Prescaler,Period,Channel-PWM Generation4 CH4,Pulse-PWM Generation4 CH4
+TIM5.Period=291
+TIM5.Prescaler=500 - 1
+TIM5.Pulse-PWM\ Generation4\ CH4=145
+TIM8.Channel-Input_Capture2_from_TI2=TIM_CHANNEL_2
+TIM8.ICPolarity_CH2=TIM_INPUTCHANNELPOLARITY_BOTHEDGE
+TIM8.IPParameters=Channel-Input_Capture2_from_TI2,ICPolarity_CH2,Prescaler,Period
+TIM8.Period=32768-1
+TIM8.Prescaler=64-1
+USART1.IPParameters=VirtualMode-Asynchronous
+USART1.VirtualMode-Asynchronous=VM_ASYNC
+USB_DEVICE.CLASS_NAME_FS=CDC
+USB_DEVICE.IPParameters=VirtualMode,VirtualModeFS,CLASS_NAME_FS
+USB_DEVICE.VirtualMode=Cdc
+USB_DEVICE.VirtualModeFS=Cdc_FS
+USB_OTG_FS.IPParameters=VirtualMode
+USB_OTG_FS.VirtualMode=Device_Only
+VP_ADC1_TempSens_Input.Mode=IN-TempSens
+VP_ADC1_TempSens_Input.Signal=ADC1_TempSens_Input
+VP_ADC1_Vref_Input.Mode=IN-Vrefint
+VP_ADC1_Vref_Input.Signal=ADC1_Vref_Input
+VP_COMP1_VS_VREFINT12.Mode=VREFINT_12
+VP_COMP1_VS_VREFINT12.Signal=COMP1_VS_VREFINT12
+VP_FREERTOS_VS_CMSIS_V2.Mode=CMSIS_V2
+VP_FREERTOS_VS_CMSIS_V2.Signal=FREERTOS_VS_CMSIS_V2
+VP_SYS_VS_tim17.Mode=TIM17
+VP_SYS_VS_tim17.Signal=SYS_VS_tim17
+VP_TIM8_VS_ClockSourceINT.Mode=Internal
+VP_TIM8_VS_ClockSourceINT.Signal=TIM8_VS_ClockSourceINT
+VP_USB_DEVICE_VS_USB_DEVICE_CDC_FS.Mode=CDC_FS
+VP_USB_DEVICE_VS_USB_DEVICE_CDC_FS.Signal=USB_DEVICE_VS_USB_DEVICE_CDC_FS

firmware/targets/f2/target.mk

@@ -1,5 +1,7 @@
 TOOLCHAIN = arm
 
+DEBUG_AGENT		= set -m; st-util -n --semihosting
+
 BOOT_ADDRESS	= 0x08000000
 FW_ADDRESS		= 0x08008000
 OS_OFFSET		= 0x00008000