* Add Mifare classic 1k JC handling
Add mifare classic Javacard emulation handling
* Adding MIFARE 1K Javacard Emulation Compatibility
MIFARE Classic 1K Cards from NXP have the SAK value of 0x08.
MIFARE Classic 1K Cards that are emulated via javacard applet have an SAK value of 0x09.
Adding the SAK values accordingly so that Javacard emulated mifare classic tags are properly handled.
* update mifare_common.c
added javacard emulation handling for mifare classic 1k
Co-authored-by: gornekich <n.gorbadey@gmail.com>
Co-authored-by: あく <alleteam@gmail.com>
* Move structs to header
* roll mbedtls into loclass
* Picopass with scene for reading card
* Picopass: fix memory leak
* Lib: return mbedtls back
* Picopass: rename symbols to match naming guide
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* add mdedtls for des3 implementation
* add localss from RfidResearchGroup/proxmark3
* picopass reader app and rfal for communicating with picopass cards
* always turn off field
* close storage when keys are not found
* Add mbedtls as submodule
* add mbedtl_config
* Switched to only including specific mbedtls files I need. Thank you @kevinwallace
* cherry-pick kevinwallace sconsify
* scons for mbedtls/loclass
* Reset to ready state on error
* unsigned FC/CN
* clean FC/CN if not decoded
Co-authored-by: hedger <hedger@users.noreply.github.com>
Co-authored-by: あく <alleteam@gmail.com>
Co-authored-by: Kevin Wallace <git+flipperzero@kevin.wallace.seattle.wa.us>
* Adding MIFARE 1K Infineon Compatibility
As per Issue #1342,
MIFARE Classic 1K Cards from NXP have the SAK value of 0x08.
MIFARE Classic 1K Cards from Infineon have an SAK value of 0x88.
Adding the SAK values accordingly so that Infineon tags are properly handled.
* nfc: refactor nfc_worker_read_mifare_desfire to use furi_hal_nfc_tx_rx
Renames furi_hal_nfc_exchange_full to furi_hal_nfc_tx_rx_full, and
rewrites it to use furi_hal_nfc_tx_rx. This eliminates the final
remaining use of furi_hal_nfc_exchange, so remove that.
* nfc: write debug.pcap when debug mode enabled
Limited to NFC protocols that use furi_hal_nfc_tx_rx to communicate.
* switch to Doxygen style comment
Co-authored-by: Kevin Wallace <git+flipperzero@kevin.wallace.seattle.wa.us>
Co-authored-by: あく <alleteam@gmail.com>
* SubGhz: add frequency support 310 MHz
* SubGhz: deleting a TMP file using the "Erase" button in Read RAW
* SubGhz: fix frequency analyzer scan speed
* SubGhz: fix start duration came_atomo protocol
* SubGhz: refactoring subghz_setting
* SubGhz: refactoring load setting frequency analyzer
* SubGhz: fix load setting, default frequency
* SubGhz: patch raw temp file remove code to work with string_t
* Storage: parallel safe cli
* SubGhz: new frequency settings loading system
* Assets: recompile to include latest subghz custom frequency control changes
Co-authored-by: あく <alleteam@gmail.com>
* SubGhz: fix frequency reset on incomplete exit from the transmission menu
* SubGhz: fix incorrect shutdown of CC1101 if it was not turned on
* SubGhz: consciousness and transmission support Security+ 1.0
* Unit_test: add test encoder Security+ 1/0
* SubGhz: fix start counter Security+ 1.0
Co-authored-by: SG <who.just.the.doctor@gmail.com>
Co-authored-by: あく <alleteam@gmail.com>
* File browser module and test app
* nfc: Add support for saved files in subdirectories
* nfc: Use helper function to get shadow path when loading data
* File browser dialog integration pt.1
* File browser dialog integration pt.2
* Gui,Dialogs: drop file select
* Correct use of dynamic string_t(string_ptr)
Co-authored-by: Yukai Li <yukaili.geek@gmail.com>
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* nfc: Add NTAG I2C (Plus) 1K/2K read support
* nfc: Add rudimentary NTAG I2C emulation
* nfc: Closer NTAG I2C emulation plus debug logging
* nfc: Fix NTAG I2C sector select emulation
* nfc: Add security for NTAG I2C
* nfc: Send NAK correctly for MFUL reads
* nfc: Better emulate NTAG I2C SECTOR_SELECT behavior
* nfc: Fix non-I2C Ultralight read
Per datasheet, max sector for SECTOR_SELECT is 0xfe, so 0xff is OK
as uninit value
* nfc: Only read sig for NTAG if supported
Attempting to read signature breaks immediate call to sector select on
NTAG I2C original for some reason, so don't read signature if the
command is not supported
Co-authored-by: gornekich <n.gorbadey@gmail.com>
Only the bottom nybble of buf[1] is the key ID; the top nybble contains flags.
Notably, the top bit is set for AES mode on EV1+ cards, and ORCA cards in the
Seattle area were just upgraded to include an app that uses AES.
Prior to this, cards with flags set could be read and saved just fine, but
loading them would fail due to missing keys. After this, tags saved with the
old version will load fine, and when re-saved will have the flags separated
out into a new field.
Co-authored-by: Kevin Wallace <git+flipperzero@kevin.wallace.seattle.wa.us>
Co-authored-by: gornekich <n.gorbadey@gmail.com>
Co-authored-by: あく <alleteam@gmail.com>
* SubGhz: MegaCode display changes
* SubGhz: refactoring frequency analyzer
* SubGhz: use one stage detection in frequency analyzer, tune bw, datarate and etc
* SubGhz: tune analyzer threshold
* SubGhz: raise frequency analyzer threshold and rssi sampling config
* SubGhz: fix frequency analyzer, small step frequency analysis
* SubGhz: subghz_frequency_analyzer_worker
* SubGhz: fix SUBGHZ_FREQUENCY_ANALYZER_THRESHOLD
* SubGhz: debug logging in frequency analyzer, increase MAGN_TARGET to max value
* SubGhz: reduce RSSI delay in frequency scanner
* SubGhz: fix delays, remove trace logging from frequency analyzer
* SubGhz: cleanup variable names and add comments
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
The country_code does not always have extra pad bytes, so incrementing the index by 2 in emv_decode_read_sfi_record() was too much.
Co-authored-by: Gary <gary@x1z.net>
Co-authored-by: gornekich <n.gorbadey@gmail.com>
* Updater: Migrating to new manifest path convention
* RPC: Added update preparation status to RPC
* RPC: bumped protobuf submodule
* Bumped protobuf_version.h
* FuriCore: add missing include. Lib: make mlib smaller
* Explicitly tell where we have doubles and fix random in animations
* makefile: added -DLFS_NO_DEBUG
* Updater: path len constant dedup
* Updater: checking for hardware version match before parsing manifest
* LD: moved _DRIVER_CONTEXT sections to .bss, where they belong.
* LD: avoiding PROBGITS warning, moved _CONTEXT to data
* Updater: Added version check on update package - refusing to install outdated
Co-authored-by: あく <alleteam@gmail.com>
* Updater: UI rework initial
* Updater: further updates to UI, added a temporary parrot
* Updater: additional checks on radio stack type before update
* Second iteration of updater UI: additional handling of resource unpacking errors
* updater: removed extra logging, renamed some stages
* Updater: Changed "back" button icon on error screen
* Archive: signed/unsigned fix
* Updater: cancelling update also cancels LFS+resources processing; restored /ext/update/ folder magic to 0
* Updater: root dir fix
Co-authored-by: nminaylov <nm29719@gmail.com>
* Fixing compiler warnings with -Wextra
* More warnings suppression, WIP
* Even more warning fixes
* Added new lines at end of text files.
* Padding fix
* Additional fixes to warnings on different build configurations; added -Wextra to default build pipeline
* Fixes for Secplus v1
* -additional warnings
* +-Wredundant-decls fixes
* FuriHal: print stack overflow task name in console
* FuriHal: add missing include
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* [FL-2515] Keep backlight on for updater ops
* Notification: Renamed backlight sequences to more obvious names
Co-authored-by: あく <alleteam@gmail.com>
