Commit Graph

16 Commits

Author SHA1 Message Date
Georgii Surkov
01434265f6
[FL-2399, FL-2261] Tickless sleep shenanigans (#1168)
* Disable USART in sleep
* Restore UART state on suspend/resume
* FuriHal: Enable stop mode and add insomnia to I2C and SPI
* Remove IDLE interrupt
* FuriHal: add FPU isr and disable all FPU interrupt, add core2 stop mode configuration on deep sleep
* FuriHal: tie stop mode debug with debug rtc flag
* FuriHal: adjust flash latency on clock switch, tie mcu debug with RTC debug flag
* FuriHal: move resource init to early stage
* Add EXTI pending check, enable debug traps with compile-time flag
* Wrap sleep debug functions in conditional compilation
* Remove erroneous changed
* Do not use CSS, remove it from everywhere
* Enable/disable USB on VBUS connect (prototype)
* FuriHal: add LPMS and DEEPSLEEP magic, workaround state inconsistency between cores
* FuriHal: honor c1 LMPS
* USB mode switch fix
* Applications: add flags and insomnia bypass system
* Correct spelling
* FuriHal: cleanup insomnia usage, reset sleep flags on wakeup, add shutdown api
* FuriHal: extra check on reinit request
* FuriHal: rename gpio_display_rst pin to gpio_display_rst_n
* FuriHal: add debug HAL
* FuriHal: add some magic to core2 reload procedure, fix issue with crash on ble keyboard exit
* FuriHal: cleanup ble glue, add BLE_GLUE_DEBUG flag
* FuriHal: ble reinit API, move os timer to LPTIM1 for deep sleep capability, shutdown that works
* FuriHal: take insomnia while shutdown
* Remove USB switch on/off on VBUS change
* Better tick skew handling
* Improve tick consistency under load
* Add USB_HP dummy IRQ handler
* Move interrupt check closer to sleep
* Clean up includes
* Re-enable Insomnia globally
* FuriHal: enable CSS
* FuriHal: remove questionable core2 clock shenanigans
* FuriHal: use core1 RCC registers in idle timer config
* FuriHal: return back CSS handlers, add lptim isr dispatching

Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
Co-authored-by: nminaylov <nm29719@gmail.com>
2022-04-29 16:29:51 +03:00
Nikolay Minaylov
2f3ea9494e
HAL to LL migration: GPIO, HSEM, AES (#1069)
* gpio, hsem, crypto: switch from HAL to LL/registers
* Moved GPIO initialization to furi_hal
* More HAL removed
* All HAL modules disabled
* HAL is finally removed
* hal_gpio -> furi_hal_gpio, main.h removed
* Bootloader build fix
* RTOS config moved to freertos-glue
* delay -> furi_hal_delay

Co-authored-by: あく <alleteam@gmail.com>
2022-03-30 18:23:40 +03:00
SG
bdba15b366
[FL-2393][FL-2381] iButton, OneWire: move to plain C (#1068)
* iButton: getting started on the worker concept
* Hal delay: added global instructions_per_us variable
* iButton: one wire slave
* iButton: ibutton key setter
* iButton: one wire host, use ibutton_hal
* iButton\RFID: common pulse decoder concept
* iButton: cyfral decoder
* iButton: worker thread concept
* iButton: metakom decoder
* iButton: write key through worker
* iButton: worker mode holder
* iButton: worker improvements
* iButton: Cyfral encoder
* iButton: Metakom encoder
* lib: pulse protocol helpers
* iButton: Metakom decoder
* iButton: Cyfral decoder
* iButton worker: separate modes
* iButton: libs documentation
* HAL: iButton gpio modes
* iButton worker: rename modes file
* iButton worker, hal: move to LL
* iButton CLI: worker for reading and emulation commands
* iButton HAL: correct init and emulation sequence
* iButton cli: moved to plain C
* iButton: move to worker, small step to plain C
* Libs, one wire: move to plain C
* Libs: added forgotten files to compilation
* iButton writer: get rid of manual disable/enable irq
2022-03-29 16:01:56 +03:00
あく
939998a8c8
Release Candidate 0.48.0 Bug Fixes (#991)
* Power: wait a little bit till message displayed on screen when executing power off. FuriCore: do not use bkpt in release builds(causing HardFault when SPI is active).
* Cleanup BSS section: add more consty consts to be more constish.
* Desktop: properly handle autostarted applications.
2022-02-13 22:24:03 +03:00
あく
df2d1ad13f
[FL-2219, FL-2251] System, FuriCore, FuriHal: various bug fixes and improvements (#986)
* Replace irq shenanigans with critical section
* Power: halt system on power off instead of crash.
* Gui: properly handle input event on NULL current_view
* FuriHal: correct gpio configuration sequence
* FuriHal: cleanup uart initialization. Makefile: allow to disable thread support.
* Loader: improve locking, fix simultaneous app start crash, full command line args support for gui apps, more consistent insomnia
* Loader: correct spelling
* FuriHal: increase gpio configuration readability
* FuriHal: correct gpio configuration error when mode is GpioModeEventRiseFall
Co-authored-by: DrZlo13 <who.just.the.doctor@gmail.com>
2022-02-10 14:20:50 +03:00
あく
389ff92cc1
Naming and coding style convention, new linter tool. (#945)
* Makefile, Scripts: new linter
* About: remove ID from IC
* Firmware: remove double define for DIVC/DIVR
* Scripts: check folder names too. Docker: replace syntax check with make lint.
* Reformat Sources and Migrate to new file naming convention
* Docker: symlink clang-format-12 to clang-format
* Add coding style guide
2022-01-05 19:10:18 +03:00
gornekich
420c03bb58
[FL-1720] BLE GUI refactoring (#678)
* dialog_ex: add clean method, fix documentation
* application: add bt debug and settings application
* bt: add debug application
* bt: add settings application
* bt: rework bt service
* bt debug: fix carrier debug app
* assets: add debug animation to main menu
* bt debug: fix bt packet test
* bt service: rework bt service
* bt: cleanup
* Assets: fix spelling
* Ble: wait for core 2 startup complete before initializing radio stack.
* Accessor: remove dead code, switch port PA6 to PA4, because interrupt line 6 is used by down button.
* FuriHal: assert interrupt line on add_int_callback.
* Bt: update icon on core2 startup complete.

Co-authored-by: あく <alleteam@gmail.com>
2021-09-02 02:22:40 +03:00
Skorpionm
e17336498d
[FL-1756, FL-1769, FL-1776, FL-1759] Gui: input events complementary V3, refactoring. SubGhz: read/emulate fixes. Cleanup. (#684)
* Gui: move rotation logic to ViewPort, replace delayed View switch in ViewDispatcher with event filtering and redirection to previous view.
* SubGhz: add function description
* Gui, Input: add event id to input events.
* SubGhz: fix "crashing on ?"
* SubGhz: add icon scanning
* SubGhz: updated interface read scene,  updated interface config scene
* Assets: update subghz assets
* SubGhz:  replaced the picture in the read scene, changed the paths to additional files
* SubGhz: fix deadlock in timer callback
* SubGhz: fix icon read scene
* SubGhz: fix icon read scene
* SubGhz: fix duble text transmitter scene
* SubGhz: correct spelling. Gui: bigger queue for ViewDispatcher.
* SubGhz: fix creation and transmission of dynamic code without the presence of a manufactory key
* SubGhz: fix keelog, setting a name in the absence of a manufactory key
* SubGhz: fix load bad keelog key
* Format sources
* Furi: remove garbage from core. GpioTester: fix memory leak and cleanup
* Accessor: remove obsolete notification code
* MusicPlayer: remove input event injection
* Input: rename id to sequence

Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2021-09-02 00:05:00 +03:00
あく
0a97d6913c
Rename api-hal to furi-hal (#629) 2021-08-08 21:03:25 +03:00
あく
7907cb232b
Applications: unified entry point naming scheme, drop dead code, cleanup. (#628) 2021-08-07 19:54:42 +03:00
あく
8211432685
Clang formatter: add indent to wrapped functions names. (#548) 2021-07-01 03:45:20 +03:00
SG
2daf65b62b
[FL-1237] Notifications app (#476)
* Notification app: init
* Notification app: separate message sequences
* Notification app: rename notifications to notification
* Notification app: rework api
* Notification app: new sequences for charger
* Power app: add state for better led handling
* Power app: NotificationSequence type, notification led process
* Blink app: use notifications
* Notification app: sound and vibro notifications
* Notification app: note messages
* Notification app: more messages
* Notification app: update note message generator
* Blink app: fix state counter
* Notification app: fix delay event
* App sd-filesystem: notifications
* App notifications: headers c++ compatibility
* App notifications: Cmaj success chord sequence
* App iButton: use notifications
* App notification: display backlight notifications
* App notification: add "display on" message to success and error sequences
* App accessor: use notifications
* App ibutton: guard onewire key read
* Lib-RFAL: remove api_hal_light usage
* App notification: add blocking mode, rework display api
* Cli led command: use internal notification instead of direc access to leds.
* App unit test: use notifications
* App lfrfid: use notifications
* Apps: close notification record
* App subghz: rough use of notifications
* App notificaton: ignore reset flag
* App strobe: removed
* Lib irda decoder: fix nec decoding
* App irda: fix assert, use notifications
* Apps: use notifications
* Fix IRDA tests
* Cli: better var naming
* App notification: readable sources

Co-authored-by: Albert Kharisov <albert@flipperdevices.com>
Co-authored-by: あく <alleteam@gmail.com>
2021-05-24 16:44:14 +03:00
SG
eac8626c8c
[FL-1351] Wiegand read fix (#483)
* App accessor: fix external interrupts binding. Hal: removed InterruptTypeExternalInterrupt.
* GPIO hal: add ex and simple init functions to F6 target
* GPIO hal: add dummy alt fn to F6 target
* RFID hal: update gpio hal usage
* F5,F6: synchronize targets, backport VCP fixes, cleanup.

Co-authored-by: あく <alleteam@gmail.com>
2021-05-24 12:57:14 +03:00
SG
46bc515c6a
Low frequency RFID app [Read stage] (#385)
* App Lfrfid: init
* HAL-resources: add external gpios
* HAL-pwm: fix frequency calculation
* App LFRFID: generic manchester decoder
* App LFRFID: em-marine decoder
* App iButton: fix dwt timing acquire
* App LFRFID: rfid reader
* App LFRFID: temporary read keys on read scene
* App LFRFID: remove atomic bool init.
* App LFRFID: add *.c to build
* App LFRFID: unstable HID decoder
* App LFRFID: HID-26 reading
* HAL OS: disable sleep
* App LFRFID: HID-26 reader: remove debug
* App LFRFID: static data decoder-analyzer
* App LFRFID: very raw Indala decoder
* App LFRFID: multiprotocol reader
* App LFRFID: more reliable HID decoder
* App LFRFID: syntax fix
* App LFRFID: simple read scene
* Gui: force redraw on screen stream connect
* HAL-OS: allow sleep
* App LFRFID: notify api, tune view, tune scene
* App LFRFID: simple rfid emulator
* App LFRFID: more scenes, more reliable EM decoder.
* App LFRFID: format fix
* App LFRFID: warning fix
* Api-hal-resources: add rfid pins, rename external pins
* App LFRFID: remove unused emulator
* App LFRFID: use new gpio hal api
* App accessor: use new ext gpio name
* App LFRFID: remove unused emulator
* App LFRFID: remove debug gpio
* Api-hal-resources: alternate functions init
* Api-hal-rfid: new api
* Api-hal-ibutton: new api
* Api-hal: new headers
* App LFRFID: use new api in reader subroutines
* App LFRFID: use new api in emulator subroutines
* App LFRFID: remove old app
* App LFRFID, App iButton: fix memleak
* Api-hal-rfid: comments
* App LFRFID: pulse joiner helper, it combines pulses of different polarity into one pulse suitable for a timer
* App LFRFID: pulse joiner, now can accept only ne pulse
* App LFRFID: pulse joiner, fixes
* App LFRFID: EM encoder and emulation
* App LFRFID: format fixes
* App LFRFID: emmarine encoder cleanup
* App LFRFID: HID Encoder blank
* App LFRFID: Indala Encoder blank
2021-05-04 16:21:16 +03:00
gornekich
b405a22cd1
[FL-1167] Rework GPIO and EXTI with LL lib (#424)
* api-hal-gpio: rework gpio on ll
* one_wire_slave: rework gpio initialization
* interrupts: add attribute weak to hal exti interrupts handlers
* api-hal-gpio: add exti interrupt handlers
* input: rework with api-hal-gpio interrupts
* one_wire_slave: rework with api-hal-gpio interrupts
* api-hal-gpio: fix incorrect exti line config
* api-hal-gpio: add doxygen documentation
* api-hal-gpio: add enable / disable interrupts
* api-hal-gpio: add get_rfid_level
* core: remove api-gpio
* applications: rework gpio with api-hal-gpio
* lib: rework gpio with api-hal-gpio
* rfal: disable exti interrupt when rfal is inactive
* rfal: add interrupt gpio reinitialization
* api-hal-gpio: hide setting speed and pull mode LL implementation
* stm32wbxx_it: remove unused EXTI handlers
* api-hal-gpio: guard set, enable, disable and remove interrupt
* Drop F4 target
* Accessor: update gpio api usage

Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2021-04-29 11:51:48 +03:00
SG
c3350990c2
App accessor: init (#433) 2021-04-28 15:13:25 +03:00