Commit Graph

14 Commits

Author SHA1 Message Date
Skorpionm
51aa169c3b
[FL-2149] SubGhz: Additional frequencies for testing (#920)
* SubGhz: add new frequency for testing
* [FL-2149] SubGhz: power reduction for Australia

Co-authored-by: あく <alleteam@gmail.com>
2021-12-22 14:05:14 +03:00
あく
439fb9c18d
[FL-1910, FL-2146] Update to new FreeRTOS, fix CMSIS thread flags collision with stream buffer. New cube. (#917)
* Libs: add FreeRTOS submodule. FuriHal: replace ST provided FreeRTOS with original one. FuriHal: for cmsis os hal and patch it for better compatibility with stream buffer.
* Makefile: fix svd plugin on blackmagic
* Lib: update STM32CubeWB package. Project: update project to match new cube package.
* Lib: properly rebase and upload STM32CubeWB
* BleGlue: switch ack logging level to trace
2021-12-21 15:16:25 +03:00
Skorpionm
1232defcf1
[FL-2129] SubGhz: Fix Duty cycle at 433/868 (#892)
* [FL-2129] SubGhz: Fix Duty cycle at 433/868
* SubGhz: fix syntax
* SubGhz: increased silence time in the 868 range
* SubGhz: added build flag LAB_TESTS
* SubGhz: better LAB_TESTS flag handling
* NFC: LAB_TESTS flag handling

Co-authored-by: DrZlo13 <who.just.the.doctor@gmail.com>
2021-12-13 15:21:37 +03:00
Oleg Schwann
949079cb74
All strange time constants are now frequency multipliers (#834) 2021-11-22 21:49:57 +03:00
Skorpionm
a8981d317a
[FL-1815, FL-1851, FL-1856] SubGhz: preparation for certification, add deleting stored signals and rename file in SubGHz app (#714)
* [FL-1811] FuriHal: move core2 startup to hal init stage, prevent working with flash controller till core2 startup finish. #704
* SubGhz: fix GO0 low on last hop transmission,  decreased DutyCycle in tests
* SubGhz: test_static fix max 5 sec in transmission mode, DutyCycle <23%
* [FL-1815] SubGhz: prohibiting transmission if it is not within the permitted range for the given region
* SubGhz: fix F7 furi-hal-subghz
* SubGhz: fix logic working tests
* SubGhz: fix princeton encoder for test
* SubGhz: add log princeton encoder
* [FL-1856] Subghz: fix output a double error if the file cannot be opened
* [FL-1851] SubGhz: add deleting Stored Signals in SubGHz App
* SubGhz: add rename file SubGhz app
* SubGhz: update stats message in princeton
* SubGhz: correct spelling
* SubGhz: fix FM config,  add hardware signal processing less than 16 μs,  add added filter for processing short signals
* SubGhz: add Scher-Khan MAGICAR Dinamic protocol
* SubGhz: sync fury targets

Co-authored-by: あく <alleteam@gmail.com>
2021-09-28 03:05:40 +03:00
Skorpionm
0a8a944e10
Skorp subghz signal archive (#667)
* SubGhz: Add millis() furi, add subghz history struct
* SubGhz: Fix subghz history
* Gubghz: Fix code repeat  history, add clean history
* SubGhz: reading and adding keys to history
* Gui: Renaming Sub 1-Ghz -> SubGhz
* Archive: Renaming Sub 1-Ghz -> SubGhz
* SubGhz:  Add menu history, modified button for sending a signal, changed output of data about accepted protocol
* Archive: Fix name subghz
* SubGhz: Menu navigation
* Assets: Add assets/SubGHz/icon.png
* Assets: add new icons for subghz
* SubGhz: Fix name Add manually scene
* SubGhz: Fix load icon Read scene. rename encoder struct,  rename protocol function load from file, add load raw data protocol, add info pleasant signals all protocol
* SubGhz: fix memory leak
* SubGhz: change of receiving frequency for read scene
* SubGhz: Add save/load frequency and preset, add automatic configuration of transmit/receive to the desired frequency and modulation, add button "save" config scene
* SubGhz: Fix frequency and preset, fix frequency add manualli scene, fix re-executing the parser
* Furi-hal-subghz: add 2-FSK config, fix ook config 650KHz BW Tx filter
* Fix formatting and release build
* SubGhz: Delete read scene
* SubGhz: Fix frequency add manualli scene,  refactoring code
* SubGhz: 2 profiles for OOK, fix broken build.
* SubGhz: Add passing static codes from read scene, add notification read scene, refactoring code
* SubGhz: fix assert on worker double stop.

Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2021-08-28 16:51:48 +03:00
あく
dd8a90957f
Fix SubGhz test views erratic behavior on mode switch. New bootloader image. (#669)
* Assets: add bootloader DFU icon.
* SubGhz: locking model in test views, wait for calibration complete on frequency change.
2021-08-24 02:52:59 +03:00
Skorpionm
a024e470b7
SubGhz: read and save static remotes. Create new static and dynamic remotes. (#646)
* SubGhz: the functions of saving loading KeeLog have been modified, saving KeeLog is prohibited
* SubGhz: Fix displaying Nice FlorS in the Raed scene
* SubGhz: Fix displaying Faac SLH in the Raed scene
* SubGhz: Fix displaying iDo in the Raed scene
* SubGhz: Fix displaying Star Line in the Raed scene
* SubGhz: Fix displaying Nice Flo in the Raed scene, added save and load functions. (testing needed, no remote control)
* SubGhz: subghz_beginadded common encoder upload signal
* SubGhz: add Came encoder
* SubGhz: modified pricenton encoder, fix view transmitter hide the "Send" button if there is no encoder
* SubGhz: add nice flo encoder, need testing no remote control
* SubGhz: add gate_tx encoder
* SubGhz: add nero_sketch encoder
* SubGhz: add keelog encoder
* SubGhz: add long upload upload while the button is pressed while releasing the transfer is over, with a check for sticking (maximum 200 upload repetitions)
* SubGhz: fix max upload
* SubGhz: Fix structure subghz add encoder
* SubGhz: add generating and sending a dynamic keelog key, refactoring the code
* SubGhz: add notifications
* SubGhz: add creating a new remote control (Pricenton, Nice Flo 12bit, Nice Flo 24bit, CAME 12bit, CAME 24bit, Gate TX, DoorHan)
* SubGhz: Fix load file, fix scene start
* Subghz: Fix show key
* SubGhz: Fix subghz_cli
* SubGhz: Fix furi-hal-subghz
* Format sources
* SubGhz: standard notification scheme, fix broken assert in DMA.
* SubGhz: move level alignment logic to furi-hal-subghz, fix spelling, cleanup.

Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2021-08-16 22:56:23 +03:00
Skorpionm
1cfa857f98
[FL-1610] SubGhz: scene based application, PT save and replay (#630)
* SubGhz: scene based application
* SubGhz: encoder/decoder separation, DMA streaming, update app and cli.
* SubGhz: 2 stage async tx complete, minor cleanup
* SubGhz: 2 stage async tx complete, FIX state pin end transmit
* SubGhz: Pricenton, receive TE signal
* SubGhz: Pricenton, add save data, add load data
* SubGhz: Add Read scene, Fix pricenton save, load funtion
* SubGhz: Add Read, Receiver, SaveName scene
* SubGhz: Read and Save (pricenton)
* SubGhz: add Load scence
* SubGhz: Fix select file scene, add load scene, add transmitter view, add send tx pricenton
* SubGhz: Fix pricenton encoder, fix transmitter send
* SubGhz: modified Pricenton Encoder (added guard time at the beginning), modified CC1101 config, code refactoring
* SubGhz: Fix pricenton encoder defalut TE
* Archive: Fix path and name SubGhz
* Archive: Fix name app SubGhz
* GubGhz: Came: add Save, Load key
* GubGhz: GateTX: add Save, Load key
* GubGhz: NeroSketch: add Save, Load key
* Github: better linters triggers
* SubGhz: adding fast loading keys Archive -> Run in app
* GubGhz: KeeLog: add Save, Load key, key generation from the serial number of the meter and the button
* SubGhz: format sources and fix compilation
* FuriHal: add subghz configuration description for AGC section
* SubGhz: save only protocols that can be saved. Cleanup.
* Github: lint on pull requests

Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2021-08-12 17:42:56 +03:00
あく
0a97d6913c
Rename api-hal to furi-hal (#629) 2021-08-08 21:03:25 +03:00
あく
421a0f6b97
[FL-1546, FL-1534, FL-1550] Drop F5, Certification preparation, Global application start lock (#585)
* Firmware: drop F5 target
* Rename app-loader to loader
* Update code owners file
* Loader: global application start lock API, minor refactoring
* Archive: update loader usage
* Cli: Command flags, global application start lock
* Apps: update cli API usage
* Bootloader: minor refactoring
* Firmware: minor build refactoring
* SubGhz: GUI packet test
* SubGhz: drop packet transmission and unused presets
* Github: drop F5 from build
* Archive: favorites
* Archive: a little bit more of Favorites
2021-07-18 21:09:00 +03:00
あく
851a44dc59
[FL-1528] SubGhz: dma send (#579)
* Gui: input injection in screen stream
* Cli: expose ASCII table in public header
* SubGhz: dma output draft
* SubGhz: output initialization cleanup
* SubGhz: update dma send routine, add subghz_tx cli command.
* SubGhz: proper register address for DMA
* SubGhz: proper, fully working dma+tim2 configuration
* SubGhz: transmit PT with cli.
* Drivers: fix invalid size in CC1101 PA_TABLE loading routine.
* Interrupts: configurable DMA isrs.
* F5: backport fixes.
* SubGhz: free buffer after use
* SubGhz: use sleep instead of reset at the end
* SubGhz: async tx repeat with circular DMA
* SubGhz: disable dma channel on complete, adjust PT send timings
* SubGhz: backport function singature change to F5
* SubGhz: add tx debug gpio
2021-07-15 16:54:11 +03:00
SG
7734fb4018
[FL-1371][FL-1502] Lfrfid app: fixes. (#555)
* Gui module byte-input: changed api
* Gui: changed font height in multiline text according to guideline
* Apps lrfid, nfc: changed send and receive icon
* App lfrfid: fix text, fix scene switсh
* Elements: multiline text framed, fix paddings
* Gui: remove duplicate definition of elements_multiline_text_framed
* App NFC: update byte_input callback signature
* App subghz: fix text lines in capture scene
* App subghz: position of the text is aligned with the guidelines and other scenes
* App subghz: removed mockup

Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2021-07-04 19:01:16 +03:00
あく
e8211226f3
[FL-1496] SubGhz: Library, Cli, Application (#543)
* ApiHal: set frequency and path in one go. Drivers: proper frequency registers calculation for CC1101. Update subghz cli to match new api.
* SubGhz: preparation for parsers porting, tim2 sharing
* ApiHal: add interrupts API, move all TIM2 related things there.
* SubGhz: refactor protocol lib and add keeloq.
* SubGhz: proper init_set for keeloq manafacture key
* SubGhz: port more protocols to lib
* SubGhz: load keeloq manufacture keys from sd card (if any).
* SubGhz: format output from protocols.
* SubGhz: use default frequency in subghz_rx cli command.
* SubGhz: keeloq key types
* Fix compillation error when internal storage disabled
* SubGhz: minor cleanup
* SubGhz: properly handle timeout and reset signal in subghz_rx
* SubGhz: Worker, Capture View. Furi: emulate thread join.
* SubGhz: free strings on keeloq key load end
* SubGhz: update protocols reporting API, app refactoring and capture view, update API HAL usage.
* SubGhz: update dump formatting
* ApiHal: backport subghz preset to F5
* ApiHal: backport subghz frequency range to F5
2021-06-30 00:19:20 +03:00