* Adding MIFARE 1K Infineon Compatibility
As per Issue #1342,
MIFARE Classic 1K Cards from NXP have the SAK value of 0x08.
MIFARE Classic 1K Cards from Infineon have an SAK value of 0x88.
Adding the SAK values accordingly so that Infineon tags are properly handled.
* nfc: refactor nfc_worker_read_mifare_desfire to use furi_hal_nfc_tx_rx
Renames furi_hal_nfc_exchange_full to furi_hal_nfc_tx_rx_full, and
rewrites it to use furi_hal_nfc_tx_rx. This eliminates the final
remaining use of furi_hal_nfc_exchange, so remove that.
* nfc: write debug.pcap when debug mode enabled
Limited to NFC protocols that use furi_hal_nfc_tx_rx to communicate.
* switch to Doxygen style comment
Co-authored-by: Kevin Wallace <git+flipperzero@kevin.wallace.seattle.wa.us>
Co-authored-by: あく <alleteam@gmail.com>
* nfc: Add NTAG I2C (Plus) 1K/2K read support
* nfc: Add rudimentary NTAG I2C emulation
* nfc: Closer NTAG I2C emulation plus debug logging
* nfc: Fix NTAG I2C sector select emulation
* nfc: Add security for NTAG I2C
* nfc: Send NAK correctly for MFUL reads
* nfc: Better emulate NTAG I2C SECTOR_SELECT behavior
* nfc: Fix non-I2C Ultralight read
Per datasheet, max sector for SECTOR_SELECT is 0xfe, so 0xff is OK
as uninit value
* nfc: Only read sig for NTAG if supported
Attempting to read signature breaks immediate call to sector select on
NTAG I2C original for some reason, so don't read signature if the
command is not supported
Co-authored-by: gornekich <n.gorbadey@gmail.com>
Only the bottom nybble of buf[1] is the key ID; the top nybble contains flags.
Notably, the top bit is set for AES mode on EV1+ cards, and ORCA cards in the
Seattle area were just upgraded to include an app that uses AES.
Prior to this, cards with flags set could be read and saved just fine, but
loading them would fail due to missing keys. After this, tags saved with the
old version will load fine, and when re-saved will have the flags separated
out into a new field.
Co-authored-by: Kevin Wallace <git+flipperzero@kevin.wallace.seattle.wa.us>
Co-authored-by: gornekich <n.gorbadey@gmail.com>
Co-authored-by: あく <alleteam@gmail.com>
The country_code does not always have extra pad bytes, so incrementing the index by 2 in emv_decode_read_sfi_record() was too much.
Co-authored-by: Gary <gary@x1z.net>
Co-authored-by: gornekich <n.gorbadey@gmail.com>
* Fixing compiler warnings with -Wextra
* More warnings suppression, WIP
* Even more warning fixes
* Added new lines at end of text files.
* Padding fix
* Additional fixes to warnings on different build configurations; added -Wextra to default build pipeline
* Fixes for Secplus v1
* -additional warnings
* +-Wredundant-decls fixes
* FuriHal: print stack overflow task name in console
* FuriHal: add missing include
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* Fix TextBox word wrap behavior
* Wrap width is 120 pixels, not 140. (140 is larger than the screen!)
* Glyph width already includes spacing; don't add 1 additional px
* When starting a new line, include wrapped glyph width in new line_width.
* Call canvas_set_font before text_box_insert_endline so that glyph
width is calculated using correct font.
Previous approach worked somewhat well using default TextBoxFontText but
this version is more robust, particularly when using TextBoxFontHex.
* Add basic Mifare DESFire reading, file/app browser
* Fix build with APP_ARCHIVE=0
* Add bool type to flipper_format
* Add ability to save and load DESFire card data
* Skip over NfcSceneDeviceInfo when viewing saved DESFire info
* mf_df_clear: don't leak master key settings key versions
* When opening a DESFire card from Archive, retain UID emulation behavior
* rm unnecessary \r\n
* show Popup instead of leaving view in bad state
* Move NfcReaderRequestData out of union
This makes it safe to emulate DESFire/EMV without clobbering card data.
* Display saved DESFire cards via NfcSceneDeviceInfo
* Display and save file metadata even when contents are missing
This can happen when a file doesn't allow unauthenticated reads (see the
call to mf_df_parse_read_data_response in nfc_worker.c).
Co-authored-by: Kevin Wallace <git+flipperzero@kevin.wallace.seattle.wa.us>
Co-authored-by: あく <alleteam@gmail.com>
Co-authored-by: gornekich <n.gorbadey@gmail.com>
* Power: wait a little bit till message displayed on screen when executing power off. FuriCore: do not use bkpt in release builds(causing HardFault when SPI is active).
* Cleanup BSS section: add more consty consts to be more constish.
* Desktop: properly handle autostarted applications.
* Makefile, Scripts: new linter
* About: remove ID from IC
* Firmware: remove double define for DIVC/DIVR
* Scripts: check folder names too. Docker: replace syntax check with make lint.
* Reformat Sources and Migrate to new file naming convention
* Docker: symlink clang-format-12 to clang-format
* Add coding style guide
* nfc: fix notifications in read EMV sequence
* nfc: set focus on previously saved card
* nfc: add incorrect file format message
* mifare ultralight: increase size of max dump
* elements: draw multiline text only until it fits screen
* nfc: support variable PAN number length
* nfc: change AID display
* nfc: change worker custom event to prevent scene reenter
* nfc: double check for PAN tag
* nfc: fix edit card name appearance
* Nfc: read EMV card without name if PDOL is present.
* Desktop: increase unlock key press interval, switch to OS ticks instead of HAL.
* Desktop: remove debug logging
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* assets: add EMV AID table for NFC app
* file-worker: add searching for value by the key
* nfc: add emv parser helpers
* assets: add country and currency codes
* nfc: add country and currency code parsing
* emv_decoder: add country and currency code support
* nfc: add AID. currency and country display
* nfc: rework bank_card view
* nfc: add currency and country save
* assets: change emv chip asset
* nfc: change asset in bank card
* gui: add frame element to widget
* nfc: add bank card frame, add documentation
* rfal: fix long APDU command emulation
* nfc: fix typos
* Scripts ReadMe: assets delivery command
Co-authored-by: あく <alleteam@gmail.com>
Co-authored-by: DrZlo13 <who.just.the.doctor@gmail.com>