Commit Graph

17 Commits

Author SHA1 Message Date
あく
f4f8ef59fd
[FL-933] API HAL I2C: initialize bus on start (#360)
* API HAL I2C: initialize bus on start
* API HAL I2C: move timing register to resources, explain its value. Update cube project.
2021-03-03 12:21:14 +03:00
あく
38011e88f3
API HAL: takeover i2c initialization and abstraction. Update I2C drivers to match new api. Back port API HAL to bootloader and enable light support for F5. (#356)
Co-authored-by: coreglitch <mail@s3f.ru>
2021-03-02 14:45:47 +03:00
あく
68a3f6b4b7
[FL-873] Add F5 target, lp5562 driver and api-hal-light (#347)
* Add F5 target, lp5562 driver and api-hal-light. Update api-usage, switch to F5 by default.
* API HAL: add i2c and hardware version api. Dolphin: show hardware version.
* OTP version generator and flashing utility.
* Assets script: fix code formatting
* Backport F5 changes to F4
* F4: disable insomnia, prevent damage to BLE RX path
* F5 HAL API Light: remove magic delay to fix magic BLE
* Dolphin: HW target validation on start
* invert RSSI indication in sub-1
* API HAL: rename board to body in version api
* Gpio tester: detach and release viewport on exit

Co-authored-by: aanper <mail@s3f.ru>
2021-02-18 15:49:32 +03:00
あく
584c0962d8
[FL-781] FURI, CLI, stdlib: stdout hooks, integration between subsystems, uniform printf usage (#311)
* FURI stdglue: stdout hooks, local and global, ISR safe printf. Uniform newlines for terminal/debug output. Power: prevent sleep while core 2 has not started.
* Furi record, stdglue: check mutex allocation
* remove unused test
* Furi stdglue: buferized output, dynamically allocated state. Furi record: dynamically allocated state. Input dump: proper line ending. Hal VCP: dynamically allocated state.
* Interrupt manager: explicitly init list.
* Makefile: cleanup rules, fix broken dfu upload. F4: add compiler stack protection options.
* BLE: call debug uart callback on transmission complete
* FreeRTOS: add configUSE_NEWLIB_REENTRANT
* API HAL Timebase: fix issue with idle thread stack corruption caused by systick interrupt. BT: cleanup debug info output. FreeRTOS: disable reentry for newlib.
* F4: update stack protection CFLAGS to match used compiller
* F4: disable compiller stack protection because of incompatibility with current compiller
* Makefile: return openocd logs to gdb
* BLE: fixed pin, moar power, ble trace info.
* Prevent sleep when connection is active
* Makefile: return serial port to upload rule, add workaround for mac os
* Furi: prevent usage of stack for cmsis functions.
* F4: add missing includes, add debugger breakpoints
* Applications: per app stack size.
* Furi: honor kernel state in stdglue
* FreeRTOS: remove unused hooks
* Cleanup and format sources

Co-authored-by: DrZlo13 <who.just.the.doctor@gmail.com>
2021-01-29 03:09:33 +03:00
あく
f070815535
Bootloader: LSE/RTC shenanigans, morse error codes, new LED color scheme (#293)
* Bootloader: LSE and RTS shenanigans, LED control, morse code for LSE failure error.
* Bootloader: add errata fix for flash controller
* Bootloader: target spelling
2021-01-07 01:45:31 +06:00
あく
4a9e4074f7
Remove obsolete target. Cleanup and update ReadMe. (#279) 2020-12-28 11:52:35 +06:00
あく
8de7083981
Bootloader: delay before boot key sampling. (#277) 2020-12-24 17:22:17 +06:00
あく
dde163fa61
Bootloader: do not configure clock on start, just minimum LL init. (#269)
* Bootloader: do not configure clock on start, just minimum LL init.
2020-12-18 23:51:08 +06:00
coreglitch
c1c069e95f
F2 F3 deprecate (#267)
* move f3-1 to f4, remove f3
* remove f2
* remove firmware F3 for pipeline
* remove patch for F4 makefile
* fix fw makefile
* migrate bootloader to f4
2020-12-14 19:36:07 +03:00
あく
228055e4eb
OpenOCD makefile integration and Charger IC initialization fixes. (#258)
* Makefile: start openocd from gdb, boot no boot version.
* bq25896: reset before readout. Cleanup.
2020-12-04 20:30:50 +03:00
あく
3a6fbff8c3
FL-339: cli diagnostic interface for power subsystem. (#256)
* Core, API: add externs for c++
* Makefile: improve debug speed, flash with openocd, cleanup f2 config
* Power: add cli diagnostic.
* Local: fix api hal externs
* Local: fix externs in main and flipper_hal
* F2: power state dump stabs
* Bootloader flashing with openocd
* F3: move bq drivers to libs
* temporary do not build drivers on local
* temporary do not build drivers on f2

Co-authored-by: aanper <mail@s3f.ru>
2020-12-02 13:47:13 +03:00
DrZlo13
49fdb28871
sd detect pin feature (#222)
* test sd detect pin
* sd detect support for f2 board
2020-11-11 09:17:53 +03:00
coreglitch
b3dddc645d
change user boot pin to left (#228) 2020-11-09 13:39:43 +03:00
あく
76e3fd3060
Firmware, Bootloader: add f3 target. (#215)
* Firmware, Bootloader: add f3 target. Refactor code to be portable across targets.
* Firmware: remove bkpt
* Makefile: debug agent. Debug: f3 platform throw openocd.
* freertos-openocd helper
* separate hal resources
* return of input_dump app
* using hew target resources abstration layer for backlight and blink
* dirty hack for input driver, f3 has no charging pin
* worked input interrupts
* working display
* F3: switch to 32mHz resonator
* F3: configure SD_CS pin
* NFC: port to F3.
* fat uart app
* sd card hal api
* separate CC1101 spi config
* faster spi gpio for sd card
* Assets: disable LFS
* Cube: disable css on LSE
* Input: format code
* Make: add bootloader source code to formatting rule
* F3: enable rf by default, adjust clock settings, map all pins where they should be.
* libs for coreglitch_demo_0
* nvic priority
* bus clocks all to 64
* lf-rfid timer and pin
* irda
* ir rx setup
* tim2 irq handler
* Makefile: environment aware mkdir
* Makefile, Irukagotchi: commit seq number.
* split falling and rising ir rx events
* Makefile: proper git branch detect on old git. Firmware: api fix.
* fix irda
* Makefile,Irukagotchi: date timestamp.
* NFC: adjust SPI speed
* Irukagotchi: format code
* Make: add blackmagic debug in host mode
* Makefile: detach blackmagic from terminal signals
* Makefile,Irukagotchi: stamp target
* add F3 bootloader/firmware to CI

Co-authored-by: Aleksandr Kutuzov <aku@plooks.com>
Co-authored-by: DrZlo13 <who.just.the.doctor@gmail.com>
Co-authored-by: aanper <mail@s3f.ru>
2020-11-06 13:52:50 +03:00
coreglitch
bce6f867f1
show target version, date, commit hash and branch (#221) 2020-11-06 12:31:06 +03:00
あく
3c2711102c
Target refactoring and cube update (#161)
* Lib: move cube to libs. Firmware: prepare for code base refactoring, detach from cube, port to cmsis_os2.

* Firmware, target f2: regenerate project with latest cube package, tim17 for os ticks.

* Firmware: unified codebase.

* Core: do not include semaphore on old targets. Firmware: dfu uplaod target.

* CI: submodules, add firmware build.

* CI: proper submodule config.

* refactor build system

* CI: update chain to use new targets. Documentation: update to match current structure.

* CI: clean before rebuild.

* Add local test

docker-compose exec dev make -C firmware TARGET=local TEST=1 run

* Makefile: target specific build directory. CI: updated artifacts path.

* Makefile: init git submodules if they don't exists.

* Makefile: debug rule now doesn't reset MCU, prevent SIGINT propagation to st-util.

* Makefile: proper rebuild sequence in zz and zzz

* Makefile: timestamp tracking for flash and upload commands.

* Apps: modular build. Input: fix flipper hal inline.

* Wiki: proper bootloader link.

* Applications: fix broken build for local targets.

* add st-flash to docker

* fix build

* force rebuild app

* move app force to firmware part

* fix build deps

* qrcode build ok

* fix example display

* add testing routine

* update build instruction

Co-authored-by: Aleksandr Kutuzov <aku@plooks.com>
Co-authored-by: aanper <mail@s3f.ru>
2020-10-07 12:37:43 +03:00
あく
805bb886c0
Implement bootloader #137 (#142)
* Boot: switch to DFU routines. Implements #132 part 1 of 2.

* Boot: boot to DFU shortcut, hard reset USB on each boot. Implements #132 part 2 of 2.

* Deploy scripts: fix path for deploy dfu.

* Bootloader: initial version. Target_f2: rebase, update deployment scripts.

* Bootloader: cleanup, refactor switch2 proc. Readme,wiki: document bootloader.

* Wiki: deploy symlinks as files, bootloader info.

* Target_f2: valid flash size in linker script.

* Github CI: bootloader build and artifacts.

* Bootloader: rename platforms to targets.

* Bootloader: change dfu/os colors.

* disable set -e

* lint code

* add bootloader testing page

Co-authored-by: Aleksandr Kutuzov <aku@plooks.com>
Co-authored-by: aanper <mail@s3f.ru>
2020-10-01 02:05:04 +03:00