* ble-glue: add on connect \ disconnect, on send \ received callbacks
* bt: rework service with furi-hal-bt and callbacks
* bt: update battery level on connect
* ble-glue: set one callback with parameters
* bt: rework callbacks, remove unused API
* ble-glue: remove dead code
* furi-hal-bt: add documentation
* ble-glue: apply changes for f7 target
* bt: rename RpcInstance -> Rpc
* ble: add disconnection reason
* ble: don't open bt record from GAP
* bt: fix RPC session close
* Assets: separate targets for icons and protobuf
Co-authored-by: あく <alleteam@gmail.com>
* ToolBox: add manchester-decoder and manchester-encoder
* SubGhz: add new FM config cc1101
* Subghz: add protocol Kia
* SubGhz: fix receiving the last packet Nero Radio
* SubGhz: app protocol CAME Twin (TW2EE/TW4EE)
* SubGhz: add protocol CAME Atomo (AT03EV/ AT04EV)
* F7: sync with F6
* SubGhz: add frequency analyzer
* SubGhz: remove space from file name
* SubGhz: frequency analyzer add filter and fix view
* [FL-1939] GubGhz: Frequency analyzer redesign
* SubGhz: fix incorrect subghz api call sequence in frequency analyzer worker
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* FuriHal: add charge suppress API.
* FuriHal: add guards to insomnia and charge suppress routines.
* FuriHal: proper API for scheduler in power.
* FuriHal: move charging control from critical section, fix deadlock.
* Gui: use FreeRTOS native timers controls for IconAnimation, fix crash on animation start stop
* [FL-1811] FuriHal: move core2 startup to hal init stage, prevent working with flash controller till core2 startup finish. #704
* SubGhz: fix GO0 low on last hop transmission, decreased DutyCycle in tests
* SubGhz: test_static fix max 5 sec in transmission mode, DutyCycle <23%
* [FL-1815] SubGhz: prohibiting transmission if it is not within the permitted range for the given region
* SubGhz: fix F7 furi-hal-subghz
* SubGhz: fix logic working tests
* SubGhz: fix princeton encoder for test
* SubGhz: add log princeton encoder
* [FL-1856] Subghz: fix output a double error if the file cannot be opened
* [FL-1851] SubGhz: add deleting Stored Signals in SubGHz App
* SubGhz: add rename file SubGhz app
* SubGhz: update stats message in princeton
* SubGhz: correct spelling
* SubGhz: fix FM config, add hardware signal processing less than 16 μs, add added filter for processing short signals
* SubGhz: add Scher-Khan MAGICAR Dinamic protocol
* SubGhz: sync fury targets
Co-authored-by: あく <alleteam@gmail.com>
* bt: add authentication for all characteristics
* bt: app_ble cleanup
* bt: add start and stop advertising API
* bt: rework application with start and stop advertising API
* bt: support f7 target
* bt: f7 target remove unused files
* bt: stop advertising in bt debug application
* bt: fix bt status bar update
* bt: change bluetooth On Off order
* WidGet: fix name Multiline String Element
* SubGhz: rename SubGhzProtocol to SubGhzParser and bring it up
* SubGhz: a new way to navigate in receiver views
* SubGhz: fix syntax
* WedGet: add forwarding input type to wedget button callback, fix using a callback in an application
* SubGhz: add assertions and status checks
* SubGhz: fix syntax
* [FL-1790] SubGhz: fix GateTX
* SubGhz: add 434.42 MHz frequency support
* SubGhz: rename type protocol, add decoder stage names
* SubGhz: fix navigation through received signals when changing scenes
* SubGhz: fix 2-fsk config
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* ble: remove heart rate profile
* ble-glue: delete dead code
* ble-glue: dis refactoring
* ble-glue: add battery service
* broken ble_common refactoring
* ble-glue: advertise 128 bit service uid
* ble-glue: remove dead code
* ble: advertise service 16 bit uid depending on flipper color
* ble-glue: remove debug
* ble: intriduce serial service
* ble: serial over ble
* bt: serial echo server
* bt: serial service process indicate acknowledge
* bt: serial service event handler update
* bt: refactore battery service
* bt: add battery level apdate API
* power: update battery level on change
* bt: refactore device information service
* app_ble: pairing configuration
* bt: display pin code
* bt: refactor battery service
* bt: refactor device info service
* bt: change advertise timer to freertos one
* bt: separate app_ble to hci and gap
* bt: increase max ble packet size
* gap: refactoring
* bt: refactor serial service
* bt: support f7 target
* bt: not blocking pin code show request
Co-authored-by: Anna Prosvetova <anna@prosvetova.me>
Co-authored-by: あく <alleteam@gmail.com>
* RFID: pull antenna down when emulating
* Rfid: fixed HID emulation by adding zero pulse every 4 bits
* Rfid: HID emulation fixed with DSP based FSK oscillator.
* Rfid: receive 125KHz clock for emulation timer from antenna and comparator
* Rfid: commented unused variable
* Firmware: rollback changes in f6.
* Add F7 target based on F6.
* F7/F6: update cube projects, apply changes to the targets, update linker scripts with correct RAM start values.
* FuriHal: RFID init routine.
* Scripts: update OTP tool for v11 board
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* ble: remove heart rate profile
* ble-glue: delete dead code
* ble-glue: dis refactoring
* ble-glue: add battery service
* broken ble_common refactoring
* ble-glue: advertise 128 bit service uid
* ble-glue: remove dead code
* ble: advertise service 16 bit uid depending on flipper color
* ble-glue: remove debug
* ble: intriduce serial service
* ble: serial over ble
* bt: serial echo server
* bt: serial service process indicate acknowledge
* bt: serial service event handler update
* bt: refactore battery service
* bt: add battery level apdate API
* power: update battery level on change
* bt: refactore device information service
Co-authored-by: あく <alleteam@gmail.com>
* Cli: add missing const in cli_write.
* Gui, Input: bit fields based key complementarity on all levels, key and type names API.
* Gui: minor cleanup of bit filed usage
* SubGhz: Fix Timer hopping
* SubGhz: add display of received packages and their maximum number. redesigned interface, the maximum number of received packages increased to 50
* SubGhz: add clearing history on exit read scene, jump after saving the key into the history of received signals
* SubGhz: Fix honoring the width of the icon for transmitter scene
* RFID: Fix [FL-1755] freeze after key emulation
* SubGhz: drop analyze scene and views
* SubGhz: fix save scene
* Input, GUI: new event delivery scheme that groups event for complementarity.
* Gui: update View Dispatcher documentation
* Gui: remove dead code, wait till all input events are delivered in ViewDispatcher in queue mode.
* Gui: update comment in ViewDispatcher
* FuriHal: fix incorrect clock disable invocation
* FuriHal: proper include
* SubGhz: properly reset history in receiver view
* Gui: correct view switch order and non-complementary events discarding
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* SubGhz: Add millis() furi, add subghz history struct
* SubGhz: Fix subghz history
* Gubghz: Fix code repeat history, add clean history
* SubGhz: reading and adding keys to history
* Gui: Renaming Sub 1-Ghz -> SubGhz
* Archive: Renaming Sub 1-Ghz -> SubGhz
* SubGhz: Add menu history, modified button for sending a signal, changed output of data about accepted protocol
* Archive: Fix name subghz
* SubGhz: Menu navigation
* Assets: Add assets/SubGHz/icon.png
* Assets: add new icons for subghz
* SubGhz: Fix name Add manually scene
* SubGhz: Fix load icon Read scene. rename encoder struct, rename protocol function load from file, add load raw data protocol, add info pleasant signals all protocol
* SubGhz: fix memory leak
* SubGhz: change of receiving frequency for read scene
* SubGhz: Add save/load frequency and preset, add automatic configuration of transmit/receive to the desired frequency and modulation, add button "save" config scene
* SubGhz: Fix frequency and preset, fix frequency add manualli scene, fix re-executing the parser
* Furi-hal-subghz: add 2-FSK config, fix ook config 650KHz BW Tx filter
* Fix formatting and release build
* SubGhz: Delete read scene
* SubGhz: Fix frequency add manualli scene, refactoring code
* SubGhz: 2 profiles for OOK, fix broken build.
* SubGhz: Add passing static codes from read scene, add notification read scene, refactoring code
* SubGhz: fix assert on worker double stop.
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* USB-CDC: accepting the next data packet only if we process previous data
* USB-CDC: use USB FS packet size
* HAL-console: puts method
* Check: print assertion data
* FuriHal: rx stream free space aware CDC confirmation.
* Bootloader: pull down USB lines, leave the rest to the firmware or bootloader
* F6: cleanup and move USB code to usb-glue folder, add USB suspend/resume events to VCP, cleanup target.mk, fix missing motd message in cli when using minicom.
* F5: cleanup the rest of USB glue code, adjust LPM and Power info data in descriptor.
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
- Restrict with 31 bytes length for remote and signal name
- Don't stuck for 0 PWM cycle timings
- Support timings > 65535 PWM cycles
- Fix remote file open error
- Add IRDA TX debug redirect
- Add remote parse error print, improve parsing, support tabs
- Fix stucks with uncorrect RAW signal values, long strings in remote file, etc
- Fix HAL signals capturing (save previous read value)
- Fix leak in case of failed parsing
* Storage-cli: the file write function is splitted into a function for working with text and function for raw data
* Storage-cli: read_chunks, renamed write_raw to write_chunk
* Storage-cli: fix typo
* SD Hal: fixed wrong read/write block address
* HAL-console: printf
* Storage benchmark: more popular sizes
* Toolbox: md5
* Storage-cli: better read_chunks function, md5 hash function
* Notification: fixed incorrect error message when loading settings
* Storage-cli: stat command
* Storage-cli: stat, "/" is also storage
* Scripts: add storage managment script
* Scripts, storage lib: send command with known response syntax instead of SOH
* Scripts: python3 from env
* Storage-cli: fixed mess with error texts
* Storage-cli: write, show welcome message only if we didn't have any errors
* Storage: poorly fixed folders copying
* Storage: close an old file if an error occurred while opening a new file
* Storage-cli: fixed storage info spacing
* Scripts: use positional arguments in storage.
* Scripts: explicit string encoding and decoding, documentation in comments.
Co-authored-by: あく <alleteam@gmail.com>
* FuriHal: update STM32CubeWB to latest version.
* Makefile: debug other script
* FuriHal: correctly handle 0 size transfers in VCP
* Dolphin: cleanup and minor timer tuning.
* FuriHal: update FreeRTOS config with bigger timer command queue.
* FuriHal: delayed irq enabling, fixes missing ticks.
* FuriHal: use SFSA to determine free space for internal FS, update linker script to use as much space as theoretically possible.
* Scripts: update core2 flashing scripts and OB data.
* Github: bundle resources, core2 firmware and supplementary data.
* GitHub: versioning for supplemental artifacts
* SubGhz: the functions of saving loading KeeLog have been modified, saving KeeLog is prohibited
* SubGhz: Fix displaying Nice FlorS in the Raed scene
* SubGhz: Fix displaying Faac SLH in the Raed scene
* SubGhz: Fix displaying iDo in the Raed scene
* SubGhz: Fix displaying Star Line in the Raed scene
* SubGhz: Fix displaying Nice Flo in the Raed scene, added save and load functions. (testing needed, no remote control)
* SubGhz: subghz_beginadded common encoder upload signal
* SubGhz: add Came encoder
* SubGhz: modified pricenton encoder, fix view transmitter hide the "Send" button if there is no encoder
* SubGhz: add nice flo encoder, need testing no remote control
* SubGhz: add gate_tx encoder
* SubGhz: add nero_sketch encoder
* SubGhz: add keelog encoder
* SubGhz: add long upload upload while the button is pressed while releasing the transfer is over, with a check for sticking (maximum 200 upload repetitions)
* SubGhz: fix max upload
* SubGhz: Fix structure subghz add encoder
* SubGhz: add generating and sending a dynamic keelog key, refactoring the code
* SubGhz: add notifications
* SubGhz: add creating a new remote control (Pricenton, Nice Flo 12bit, Nice Flo 24bit, CAME 12bit, CAME 24bit, Gate TX, DoorHan)
* SubGhz: Fix load file, fix scene start
* Subghz: Fix show key
* SubGhz: Fix subghz_cli
* SubGhz: Fix furi-hal-subghz
* Format sources
* SubGhz: standard notification scheme, fix broken assert in DMA.
* SubGhz: move level alignment logic to furi-hal-subghz, fix spelling, cleanup.
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* FuriHal: port spi to ll. Bootloader: add spi and display.
* Makefile: rollback disabled freertos introspection
* FuriHal: spi lock asserts. F6: minor cleanup port sdcard shenanigans to furi_hal_gpio.
* SdCard: port missing bits to furi-hal-gpio
* FuriHal: fix broken RX in SPI, update SPI API usage. RFAL: more asserts in SPI platform code.
* GUI: clear canvas on start. FuriHal: no pullup on radio spi bus.
* FuriHal: use check instead of assert in spi lock routines
* FuriHal: remove timeouts
* SdHal: add guard time to SDCARD CS PIN control.
* FuriHal: proper name for SPI device reconfigure routine. SdHal: one more enterprise delay and better documentation.
* Bootloader: update DFU text and add image.
* FuriHal: drop unused ST HAL modules.
* SdHal: fixed swapped hal_gpio_init_ex arguments
* SpiHal: fixed swapped hal_gpio_init_ex arguments
* IrdaHal: use hal_gpio_init instead of hal_gpio_init_ex
* RfidHal: fixed swapped hal_gpio_init_ex arguments
Co-authored-by: DrZlo13 <who.just.the.doctor@gmail.com>
* Rfid: indala 40134 validation and decoding
* Rfid: show indala info
* Rfid: decoder to output comparator signal on gpio pins
* Rfid: working indala 40134 decoder
* HAL: added function to change rfid timer parameters on the fly
* RFID: Indala reading, card detection, card verification
* Rfid: indala writing
* FS-Api: removed datetime manipulation functions and most of the file flags
* Filesystem: common proxy api
* Filesystem: renamed to Storage. Work has begun on a glue layer. Added functions for reentrance.
* Storage: sd mount and sd file open
* Storage: sd file close
* Storage: temporary test app
* Storage: free filedata on close
* Storage: sd file read and write
* Storage: added internal storage (LittleFS)
* Storage: renamed internal commands
* Storage: seek, tell, truncate, size, sync, eof
* Storage: error descriptions
* Storage: directory management api (open, close, read, rewind)
* Storage: common management api (stat, fs_stat, remove, rename, mkdir)
* Dolphin app and Notifications app now use raw storage.
* Storage: storage statuses renamed. Implemented sd card icon.
* Storage: added raw sd-card api.
* Storage settings: work started
* Assets: use new icons approach
* Storage settings: working storage settings
* Storage: completely redesigned api, no longer sticking out FS_Api
* Storage: more simplified api, getting error_id from file is hidden from user, pointer to api is hidden inside file
* Storage: cli info and format commands
* Storage-cli: file list
* Storage: a simpler and more reliable api
* FatFS: slightly lighter and faster config. Also disabled reentrancy and file locking functions. They moved to a storage service.
* Storage-cli: accommodate to the new cli api.
* Storage: filesystem api is separated into internal and common api.
* Cli: added the ability to print the list of free heap blocks
* Storage: uses a list instead of an array to store the StorageFile. Rewrote api calls to use semaphores instead of thread flags.
* Storage settings: added the ability to benchmark the SD card.
* Gui module file select: uses new storage api
* Apps: removed deprecated sd_card_test application
* Args lib: support for enquoted arguments
* Dialogs: a new gui app for simple non-asynchronous apps
* Dialogs: view holder for easy single view work
* File worker: use new storage api
* IButton and lfrrfid apps: save keys to any storage
* Apps: fix ibutton and lfrfid stack, remove sd_card_test.
* SD filesystem: app removed
* File worker: fixed api pointer type
* Subghz: loading assets using the new storage api
* NFC: use the new storage api
* Dialogs: the better api for the message element
* Archive: use new storage api
* Irda: changed assest path, changed app path
* FileWorker: removed unused file_buf_cnt
* Storage: copying and renaming files now works between storages
* Storage cli: read, copy, remove, rename commands
* Archive: removed commented code
* Storage cli: write command
* Applications: add SRV_STORAGE and SRV_DIALOGS
* Internal-storage: removed
* Storage: improved api
* Storage app: changed api pointer from StorageApp to Storage
* Storage: better file_id handling
* Storage: more consistent errors
* Loader: support for NULL icons
* Storage: do nothing with the lfs file or directory if it is not open
* Storage: fix typo
* Storage: minor float usage cleanup, rename some symbols.
* Storage: compact doxygen comments.
Co-authored-by: あく <alleteam@gmail.com>
* ApiHal: console abstraction, change uart baud rate to 230400. Bootloader: drop F5. Furi: prevent thread local output to serial console in stdglue.
* ApiHal: take control over system initialization, reorder some subsystems in a hope of fixing USB issues.
* Main: cleanup dead code. ISR: take care of HSECSS by our self. USB: leave clock configuration alone.
* F6 cube: switch RCC to LL.
* Cli: rollback return behavior.
* Firmware: drop F5 target
* Rename app-loader to loader
* Update code owners file
* Loader: global application start lock API, minor refactoring
* Archive: update loader usage
* Cli: Command flags, global application start lock
* Apps: update cli API usage
* Bootloader: minor refactoring
* Firmware: minor build refactoring
* SubGhz: GUI packet test
* SubGhz: drop packet transmission and unused presets
* Github: drop F5 from build
* Archive: favorites
* Archive: a little bit more of Favorites
* Add RAW format
* F5 stubs for build to pass
* Fix saving decoded signal error
* Irda: set ISR before starting timer, remove explicit NVIC configuration
Co-authored-by: あく <alleteam@gmail.com>
* gui: refactore ViewNavigator -> SceneManager
* view_dispatcher: remove scene controller, add custom and navigation cb
* scene_manager: rework scene controller, move AppScene from lib
* nfc: rework nfc scenes with new scene controller API
* view_dispatcher: crash on free if not all views were freed
* nfc: introduce scene declaration
* scene_manager: allocate and configure application scenes
* nfc: rework nfc with new Scene Manager API
* scene_manager: remove dublicated scene handlers allocation
* nfc: rework nfc app with new scene manager API
* view_dispatcher: add tick event
* scene_manager: add tick event type and handler
* nfc: rework notifications with tick event
* scene_manager: remove scene id from scene structure
* scene_manager: rename array -> stack, add documentation
* api-hal-nfc: remove listen activation processing
* nfc_scene_start: shorter submenu call
* nfc: fix nfc file name
* nfc: fix Retry in mifare ul success read
* nfc_cli: fix read timeout in nfc_detect CLI command
Co-authored-by: あく <alleteam@gmail.com>
* SubGhz: changing the operation of the capture timer, and the logic of the work of parsers
* Add toolbox lib. Move levels to toolbox. Subghz switch to levels.
* Subghz: update worker signatures
* SubGhz: pluggable level duration implementations.
* SubGhz : test drawing pictures in Gui
* SubGhz: Added a callback with the parser structure as argument
* SubGhz: copy protocol data to model
* SubGhz: refactoing code
* SubGhz: cleanup and format sources
* SubGhz: remove comments
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
Co-authored-by: DrZlo13 <who.just.the.doctor@gmail.com>
* Cli: merge version and hwinfo and form machine/human readable key value set.
* Backport F6 changes to F5. Add readme to cli_command_device_info rountine
* Cli: return proper order to radio stack version in device_info command
Co-authored-by: SG <who.just.the.doctor@gmail.com>
* ApiHal: set frequency and path in one go. Drivers: proper frequency registers calculation for CC1101. Update subghz cli to match new api.
* SubGhz: preparation for parsers porting, tim2 sharing
* ApiHal: add interrupts API, move all TIM2 related things there.
* SubGhz: refactor protocol lib and add keeloq.
* SubGhz: proper init_set for keeloq manafacture key
* SubGhz: port more protocols to lib
* SubGhz: load keeloq manufacture keys from sd card (if any).
* SubGhz: format output from protocols.
* SubGhz: use default frequency in subghz_rx cli command.
* SubGhz: keeloq key types
* Fix compillation error when internal storage disabled
* SubGhz: minor cleanup
* SubGhz: properly handle timeout and reset signal in subghz_rx
* SubGhz: Worker, Capture View. Furi: emulate thread join.
* SubGhz: free strings on keeloq key load end
* SubGhz: update protocols reporting API, app refactoring and capture view, update API HAL usage.
* SubGhz: update dump formatting
* ApiHal: backport subghz preset to F5
* ApiHal: backport subghz frequency range to F5
* Add saving to SD-Card (not ready yet)
* Add saving to SD-card (done)
* Select previous menu item
* Fix central button
* Fix current_button
* Refactoring
* Add notifications
* [FL-1417] Add IRDA CLI
CLI commands:
1) ir_rx
Receives all IR-trafic, decodes and prints result to stdout
2) ir_tx <protocol> <address> <command>
Transmits IR-signal. Address and command are hex-formatted
* Fix BUG with random memory corruption at random time in random place in random universe in random unknown space and time forever amen
* Fix submenu set_selected_item
* Bring protocol order back
* Add TODO sdcard check
* USB CDC descriptor: join product name from two strings
* add f5 support
* USB CDC descriptor: use constant device name across all device
* BLE: use device name in advertising and model
* BLE: truncate device name
Co-authored-by: あく <alleteam@gmail.com>
* api-hal-spi: make fast and slow sd card devices
* api-hal-spi: add configuration for spi bus
* fatfs: rework sd card driver with api-hal-spi
* api-hal-spi: enable spi in bus reset
* HAL interrupl manager: cleaned version
* HAL interrupt manager: mem barriers
* HAL interrupt manager: volatile interrupt list
Co-authored-by: あく <alleteam@gmail.com>
* Add more more frequencees and change ok key bahavior to toggle
* GUI: add queue support to ViewDispatcher
* SubGhz: basic cli
* SubGHz: pt send cli
* SubGhz: carrier cli commands.
* Fix irda test data merge artifacts
* Add cscope db generation
* Add api-hal-irda, TIM2: HAL->LL
* Add libirda: pwm decoding
* Universal state machine
* Add irda decoder library
* Move IRDA capture to standalone tool
* Add encoder/decoder samsung32, NEC, fix bugs
* Port current App to new Irda lib
* Fix clang format for test data
* Port IRDA api-hal to f6
Co-authored-by: あく <alleteam@gmail.com>
