Commit Graph

21 Commits

Author SHA1 Message Date
あく
5d08b35b54
[FL-1009, FL-1118] Better initialization sequence and V8 hardware support (#406)
* Interrupt manager: add memory barriers.
* ISRs: remove TIM17 dead code.
* API HAL Delay: rename initialization routine and move to API-HAL
* Main: move FURI initialization to the start.
* API HAL GPIO: drop CC1101 shenanigans, COMP inversion for new boards.
* IButton: migrate Cyfral and Metakom to RFID comp routine, make it compatible with new boards.
* RFID: Better keyboard handling and shutdown routines
2021-04-11 16:47:36 +03:00
あく
5439e232cc
[FL-950] CC1101 Stage1, SPI Refactoring, Drivers layer (#386)
* API HAL SPI: refactoring, split into layers, prepare ST HAL separation. API HAL SubGhz: initialize on start. Drivers: add basic cc1101 driver. Update API usage. Debug: increase max debugger port speed. Remove subghz apps.
* CC1101: chip status handling. ApiHalSpi: increase SubGhz bus speed to 8mhz. F4: backport subghz initialization.
* Api Hal SubGhz: rx path and frequency. CC1101: frequency control.
* SubGhz Application: basic tests
* SubGhz app: tone and packet test. API HAL SUBGHZ: update configs, add missing bits and pieces.
2021-03-31 20:52:26 +03:00
coreglitch
056e6ffa9c
New lf rfid (#342)
* invert inputs
* move RFID RX to IRQ, unstable
* remove critical blink
* supress short carrier, decrease queue
* migrate to stream buffer
* enable state change
* conditions build for invert RFID IN
* move get_rfid_in_level
* use hal function for get comp level, remove duplicate interrupt registration, interrupt unregister on exit
* reinit comparator context on mode change
2021-03-02 13:17:27 +03:00
あく
68a3f6b4b7
[FL-873] Add F5 target, lp5562 driver and api-hal-light (#347)
* Add F5 target, lp5562 driver and api-hal-light. Update api-usage, switch to F5 by default.
* API HAL: add i2c and hardware version api. Dolphin: show hardware version.
* OTP version generator and flashing utility.
* Assets script: fix code formatting
* Backport F5 changes to F4
* F4: disable insomnia, prevent damage to BLE RX path
* F5 HAL API Light: remove magic delay to fix magic BLE
* Dolphin: HW target validation on start
* invert RSSI indication in sub-1
* API HAL: rename board to body in version api
* Gpio tester: detach and release viewport on exit

Co-authored-by: aanper <mail@s3f.ru>
2021-02-18 15:49:32 +03:00
あく
b835d7a451
[FL-872] Furi, API-HAL, App-Loader cleanup and improvements (#334)
* Furi: replace obsolete furiac_exit with osThreadExit, drop obsolete apis and test. Rename systemd to flipper and move to separate file, cleanup. ApiHal: Rename timebase to os and move freertos hooks there, move insomnia api to power module.
* Furi: new thread helper
* Furi: cleanup thread documentation
* Flipper, AppLoader: update to use FuriThread. Update tasks signatures to match FuriThreadCallback signature.
* F4: rename API_HAL_TIMEBASE_DEBUG to API_HAL_OS_DEBUG
* Applications: rename FuriApplication to FlipperApplication, use FuriThreadCallback signature for apps.
* C++ app template sample, new exit method
2021-02-12 20:24:34 +03:00
あく
8b94eff7f9
Input: refactoring, platform agnostic key configuration.
Update input usage across project. Minor queue usage fixes and tick timings. (#330)
2021-02-10 11:56:05 +03:00
coreglitch
41219cc78e
Fix werror flag and warnings (#321)
* fix Werror flag
* strdup implementation fix
* fix irda and lfrdid printf
* remove unused position
* doubtful type fix
* type fix in EXTI interrupt
* fix warnings in CubeWB, need to fork ST repo
* onewire fixes
* fork STM32WB Cube repo
2021-02-01 10:51:22 +03:00
あく
523f99f154
GUI: rename widget to ViewPort. Update GUI API usage. (#317) 2021-01-29 16:52:16 +03:00
あく
584c0962d8
[FL-781] FURI, CLI, stdlib: stdout hooks, integration between subsystems, uniform printf usage (#311)
* FURI stdglue: stdout hooks, local and global, ISR safe printf. Uniform newlines for terminal/debug output. Power: prevent sleep while core 2 has not started.
* Furi record, stdglue: check mutex allocation
* remove unused test
* Furi stdglue: buferized output, dynamically allocated state. Furi record: dynamically allocated state. Input dump: proper line ending. Hal VCP: dynamically allocated state.
* Interrupt manager: explicitly init list.
* Makefile: cleanup rules, fix broken dfu upload. F4: add compiler stack protection options.
* BLE: call debug uart callback on transmission complete
* FreeRTOS: add configUSE_NEWLIB_REENTRANT
* API HAL Timebase: fix issue with idle thread stack corruption caused by systick interrupt. BT: cleanup debug info output. FreeRTOS: disable reentry for newlib.
* F4: update stack protection CFLAGS to match used compiller
* F4: disable compiller stack protection because of incompatibility with current compiller
* Makefile: return openocd logs to gdb
* BLE: fixed pin, moar power, ble trace info.
* Prevent sleep when connection is active
* Makefile: return serial port to upload rule, add workaround for mac os
* Furi: prevent usage of stack for cmsis functions.
* F4: add missing includes, add debugger breakpoints
* Applications: per app stack size.
* Furi: honor kernel state in stdglue
* FreeRTOS: remove unused hooks
* Cleanup and format sources

Co-authored-by: DrZlo13 <who.just.the.doctor@gmail.com>
2021-01-29 03:09:33 +03:00
coreglitch
fd5f694758
[FL-812] Fix emulation timings (#314)
* fix timings
* fix default vendor id to 0
2021-01-29 02:45:32 +03:00
DrZlo13
cf1c8fb223
[FL-85][FL-446][FL-720] Dallas key blanks and OneWire lib rework (#313)
* sepate one wire class
* TM2004 writer
* app mode write ds1990
* test another blanks protocol
* new ibutton slave
* one wire states
* tim1 capture compare and update interrupts
* interrupt mgr, new timers IRQ
* discard HAL_TIM_PeriodElapsedCallback from main
* add exti_14 line
* add external interrupt callback
* use int mgr in input
* better interrupt managment
* add interrupt callback enable and disable fns
* properly init app
* changed timings
* rename one wire classes
* use new owb classes
* properly remove interrupts
* new blanks writer
* remove unused tests
* new core includes
* extern c guard
* fix api_interrupt_remove usage
* remove debug info, new way to detect blanks writing
* remove copy constructor
* change keys template
* fix app sources recipe
2021-01-28 15:30:31 +03:00
coreglitch
a7951ade69
FL-810 fix emulating init state (#312)
* fix emulating init state
* add/remove comparator callback on start/stop reading
2021-01-26 16:49:37 +03:00
DrZlo13
8f9b2513ff
[FL-140] Core api dynamic records (#296)
* SYSTEM: tickless mode with deep sleep.
* Move FreeRTOS ticks to lptim2
* API: move all sumbodules init routines to one place. Timebase: working lptim2 at tick source.
* API Timebase: lp-timer routines, timer access safe zones prediction and synchronization. FreeRTOS: adjust configuration for tickless mode.
* NFC: support for tickless mode.
* API Timebase: improve tick error handling in IRQ. Apploader: use insomnia mode to run applications.
* BLE: prevent sleep while core2 starting
* HAL: nap while in insomnia mode
* init records work
* try to implement record delete
* tests and flapp
* flapp subsystem
* new core functions to get app stat, simplify core code
* fix thread termination
* add strdup to core
* fix tests
* Refactoring: remove all unusued parts, update API usage, aggreagate API sources and headers, new record storage
* Refactoring: update furi record api usage, cleanup code
* Fix broken merge for freertos apps
* Core, Target: fix compilation warnings
* Drop firmware target local
* HAL Timebase, Power, Clock: semaphore guarded access to clock and power modes, better sleep mode.
* SD-Filesystem: wait for all deps to arrive before adding widget. Core, BLE: disable debug dump to serial.
* delete old app example-ipc
* delete old app fatfs list
* fix strobe app, add input header
* delete old display driver
* comment old app qr-code
* fix sd-card test, add forced widget update
* remove unused new core test
* increase heap to 128k
* comment and assert old core tests
* fix syntax

Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2021-01-20 19:09:26 +03:00
DrZlo13
3ba1738acd
FL-262 Interrupt manager (#270)
* interrupt manager
* init interrupt manager
* add usage to lf-rfid app
* check ready flag
* move interrupts code to target hal
* fix path
2020-12-19 01:26:03 +06:00
あく
d3ff787864
GUI: abolish API injection into instances. (#265)
* GUI: abolish API injection into instances. Update usage by 3rd party apps.
* GUI: update documentation. Cleanup api usage. Adjust status bar item spacing.
2020-12-14 13:50:32 +03:00
coreglitch
ccd40497eb
FL-176 LF RFID RX (#248)
* pulldown ibutton pin during rfid read
* enable and handle COMP interrupts
* send events from comparator IRQ and handle in app
* manchester encode
* successfully read em4100
* read-emulate
* led
2020-11-19 14:11:03 +03:00
coreglitch
eb2679b982
Refactor F2/local before F3 merge (#220)
* add files from f3
* rollback lfs
* Move assets from LFS
* remove lfs from build

Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2020-11-06 11:31:59 +03:00
DrZlo13
979af6c165
Core code cleanup (#206)
* add delay function
* todo about delay_isr
* remove arduino defines and fix all apps to use core-api/hal-api
* delay for local target
* remove warnings of task_equal
* fix BSP_SD_Init
* fix USBD_static
* grio read constant pointer to gpio
* add TODO about ISR context
* const void* arg for pubsub api
* mark unused functions
* app pointers now pointed to constant apps
* fix printf format
* fix "unused" warnings in local target
* fix const pin read in local target
* fix int to pointer warnings in local target
* power read mutex error fix
* delete old makefile
* add -werror

Co-authored-by: Aleksandr Kutuzov <aku@plooks.com>
Co-authored-by: aanper <mail@s3f.ru>
2020-10-29 10:58:19 +03:00
coreglitch
de968b13b4
Implement LF RFID emulation (#208)
* migrate code from old repo, not work
* fix emulation
* disable irq handling while RFID emulating
* add testcase
2020-10-28 11:38:04 +03:00
あく
665f6d7d9c
Assets, Icons, UI toolkit. Part 1. (#202)
* Assets: import from gdrive
* Assets: fully working build pipeline and registry
* NFC: menu icon
* Gui: layers. Irukagotchi: base app to handle input on idle screen. Makefile: reboot after flash in dfu mode.
* ValueMutex: with lambda
* Assets: proper animation frames sorting
* ValueMutex: proper furi_open usage
* Assets,GUI: split icon into icon data and icon state.
* Format source code
* Docker: add python3 and imagemagic
* Irukagotchi: cleanup
* GUI: event lock moved to gui.
* Rfid: proper gui layer
* GUI: elements. Menu: frame and scroll
* GUI, Menu: format code.
* Menu: dual font main menu
* Menu: format sources
* GUI: 0 total scrollbar
* CI: enable lfs
* Menu: pixel perfect main menu

Co-authored-by: Aleksandr Kutuzov <aku@plooks.com>
Co-authored-by: aanper <mail@s3f.ru>
2020-10-26 20:00:17 +03:00
coreglitch
e699c4a31e
Lf rfid (#196)
* add lf rfid workaround
* add pwmn
* carrier generator
* proper exit for lf rfid

Co-authored-by: DrZlo13 <who.just.the.doctor@gmail.com>
2020-10-26 12:56:46 +03:00