* nfc: Add NTAG I2C (Plus) 1K/2K read support
* nfc: Add rudimentary NTAG I2C emulation
* nfc: Closer NTAG I2C emulation plus debug logging
* nfc: Fix NTAG I2C sector select emulation
* nfc: Add security for NTAG I2C
* nfc: Send NAK correctly for MFUL reads
* nfc: Better emulate NTAG I2C SECTOR_SELECT behavior
* nfc: Fix non-I2C Ultralight read
Per datasheet, max sector for SECTOR_SELECT is 0xfe, so 0xff is OK
as uninit value
* nfc: Only read sig for NTAG if supported
Attempting to read signature breaks immediate call to sector select on
NTAG I2C original for some reason, so don't read signature if the
command is not supported
Co-authored-by: gornekich <n.gorbadey@gmail.com>
Only the bottom nybble of buf[1] is the key ID; the top nybble contains flags.
Notably, the top bit is set for AES mode on EV1+ cards, and ORCA cards in the
Seattle area were just upgraded to include an app that uses AES.
Prior to this, cards with flags set could be read and saved just fine, but
loading them would fail due to missing keys. After this, tags saved with the
old version will load fine, and when re-saved will have the flags separated
out into a new field.
Co-authored-by: Kevin Wallace <git+flipperzero@kevin.wallace.seattle.wa.us>
Co-authored-by: gornekich <n.gorbadey@gmail.com>
Co-authored-by: あく <alleteam@gmail.com>
* SubGhz: MegaCode display changes
* SubGhz: refactoring frequency analyzer
* SubGhz: use one stage detection in frequency analyzer, tune bw, datarate and etc
* SubGhz: tune analyzer threshold
* SubGhz: raise frequency analyzer threshold and rssi sampling config
* SubGhz: fix frequency analyzer, small step frequency analysis
* SubGhz: subghz_frequency_analyzer_worker
* SubGhz: fix SUBGHZ_FREQUENCY_ANALYZER_THRESHOLD
* SubGhz: debug logging in frequency analyzer, increase MAGN_TARGET to max value
* SubGhz: reduce RSSI delay in frequency scanner
* SubGhz: fix delays, remove trace logging from frequency analyzer
* SubGhz: cleanup variable names and add comments
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
The country_code does not always have extra pad bytes, so incrementing the index by 2 in emv_decode_read_sfi_record() was too much.
Co-authored-by: Gary <gary@x1z.net>
Co-authored-by: gornekich <n.gorbadey@gmail.com>
* Updater: Migrating to new manifest path convention
* RPC: Added update preparation status to RPC
* RPC: bumped protobuf submodule
* Bumped protobuf_version.h
* FuriCore: add missing include. Lib: make mlib smaller
* Explicitly tell where we have doubles and fix random in animations
* makefile: added -DLFS_NO_DEBUG
* Updater: path len constant dedup
* Updater: checking for hardware version match before parsing manifest
* LD: moved _DRIVER_CONTEXT sections to .bss, where they belong.
* LD: avoiding PROBGITS warning, moved _CONTEXT to data
* Updater: Added version check on update package - refusing to install outdated
Co-authored-by: あく <alleteam@gmail.com>
* Updater: UI rework initial
* Updater: further updates to UI, added a temporary parrot
* Updater: additional checks on radio stack type before update
* Second iteration of updater UI: additional handling of resource unpacking errors
* updater: removed extra logging, renamed some stages
* Updater: Changed "back" button icon on error screen
* Archive: signed/unsigned fix
* Updater: cancelling update also cancels LFS+resources processing; restored /ext/update/ folder magic to 0
* Updater: root dir fix
Co-authored-by: nminaylov <nm29719@gmail.com>
* Fixing compiler warnings with -Wextra
* More warnings suppression, WIP
* Even more warning fixes
* Added new lines at end of text files.
* Padding fix
* Additional fixes to warnings on different build configurations; added -Wextra to default build pipeline
* Fixes for Secplus v1
* -additional warnings
* +-Wredundant-decls fixes
* FuriHal: print stack overflow task name in console
* FuriHal: add missing include
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* [FL-2515] Keep backlight on for updater ops
* Notification: Renamed backlight sequences to more obvious names
Co-authored-by: あく <alleteam@gmail.com>
* Disable USART in sleep
* Restore UART state on suspend/resume
* FuriHal: Enable stop mode and add insomnia to I2C and SPI
* Remove IDLE interrupt
* FuriHal: add FPU isr and disable all FPU interrupt, add core2 stop mode configuration on deep sleep
* FuriHal: tie stop mode debug with debug rtc flag
* FuriHal: adjust flash latency on clock switch, tie mcu debug with RTC debug flag
* FuriHal: move resource init to early stage
* Add EXTI pending check, enable debug traps with compile-time flag
* Wrap sleep debug functions in conditional compilation
* Remove erroneous changed
* Do not use CSS, remove it from everywhere
* Enable/disable USB on VBUS connect (prototype)
* FuriHal: add LPMS and DEEPSLEEP magic, workaround state inconsistency between cores
* FuriHal: honor c1 LMPS
* USB mode switch fix
* Applications: add flags and insomnia bypass system
* Correct spelling
* FuriHal: cleanup insomnia usage, reset sleep flags on wakeup, add shutdown api
* FuriHal: extra check on reinit request
* FuriHal: rename gpio_display_rst pin to gpio_display_rst_n
* FuriHal: add debug HAL
* FuriHal: add some magic to core2 reload procedure, fix issue with crash on ble keyboard exit
* FuriHal: cleanup ble glue, add BLE_GLUE_DEBUG flag
* FuriHal: ble reinit API, move os timer to LPTIM1 for deep sleep capability, shutdown that works
* FuriHal: take insomnia while shutdown
* Remove USB switch on/off on VBUS change
* Better tick skew handling
* Improve tick consistency under load
* Add USB_HP dummy IRQ handler
* Move interrupt check closer to sleep
* Clean up includes
* Re-enable Insomnia globally
* FuriHal: enable CSS
* FuriHal: remove questionable core2 clock shenanigans
* FuriHal: use core1 RCC registers in idle timer config
* FuriHal: return back CSS handlers, add lptim isr dispatching
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
Co-authored-by: nminaylov <nm29719@gmail.com>
* C2OTA: wip
* Update Cube to 1.13.3
* Fixed prio
* Functional Core2 updater
* Removed hardware CRC usage; code cleanup & linter fixes
* Moved hardcoded stack params to copro.mk
* Fixing CI bundling of core2 fw
* Removed last traces of hardcoded radio stack
* OB processing draft
* Python scripts cleanup
* Support for comments in ob data
* Sacrificed SD card icon in favor of faster update. Waiting for Storage fix
* Additional handling for OB mismatched values
* Description for new furi_hal apis; spelling fixes
* Rework of OB write, WIP
* Properly restarting OB verification loop
* Split update_task_workers.c
* Checking OBs after enabling post-update mode
* Moved OB verification before flashing
* Removed ob.data for custom stacks
* Fixed progress calculation for OB
* Removed unnecessary OB mask cast
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* SubGhz: fix the RAW file is not restored when it is launched from under the folder
* SubGhz: fix does not fit long RAW file name
* SubGhz: fix Read not cleared after file rename
* SubGhz: fix restore default frequency and modulation on output
* SubGhz: fix long name output in RAW
* Renamed assets->resources; enforcing Manifest build if it does not exist
* Rebuild resources from CI
* Added Manifest to repo - be sure to rebuild it with `make -C assets` before committing changes!
* Actually added Manifest.
* Keeping Manifest on assets clean
* Spelling fix in Makefile
* Assets: recompile
* Makefile: add debug_other to main makefile
* Github: stop compilation if compiled assets not in sync with assets sources
* Assets: recompile
* Makefile: correct debug_other rule. Bt: prevent on system start hook from waiting for bt service
* Power, FuriHal: gauge self check report
* Loader: move on system start hook call to the beginning
* Add Auto Lock Time setting
* Update .gitignore
* Add value_index toolbox module
* Auto locking basic implementation
* Better AutoLock implementation, edge cases and cleanup
* Fix NULL pointer crash
* Turn off backlight shortly in locked mode
* Re-enable auto lock after pin lock
* Correctly handle start when pin locked
* Use timer to hide locked hint
* Use a single state variable instead of multiple bools
* Do not call update callback recursively
* Allow input when the Unlocked hint is shown
* Add a delay to backlight switch off while locking
* Better user input handling
* Switch backlight off after pin timeout
* Correct grammar in notification settings
Co-authored-by: あく <alleteam@gmail.com>
* WIP on stripping fw
* Compact FW build - use RAM_EXEC=1 COMPACT=1 DEBUG=0
* Fixed uninitialized storage struct; small fixes to compact fw
* Flasher srv w/mocked flash ops
* Fixed typos & accomodated FFF changes
* Alternative fw startup branch
* Working load & jmp to RAM fw
* +manifest processing for stage loader; + crc verification for stage payload
* Fixed questionable code & potential leaks
* Lowered screen update rate; added radio stack update stubs; working dfu write
* Console EP with manifest & stage validation
* Added microtar lib; minor ui fixes for updater
* Removed microtar
* Removed mtar #2
* Added a better version of microtar
* TAR archive api; LFS backup & restore core
* Recursive backup/restore
* LFS worker thread
* Added system apps to loader - not visible in UI; full update process with restarts
* Typo fix
* Dropped BL & f6; tooling for updater WIP
* Minor py fixes
* Minor fixes to make it build after merge
* Ported flash workaround from BL + fixed visuals
* Minor cleanup
* Chmod + loader app search fix
* Python linter fix
* Removed usb stuff & float read support for staged loader == -10% of binary size
* Added backup/restore & update pb requests
* Added stub impl to RPC for backup/restore/update commands
* Reworked TAR to use borrowed Storage api; slightly reduced build size by removing `static string`; hidden update-related RPC behind defines
* Moved backup&restore to storage
* Fixed new message types
* Backup/restore/update RPC impl
* Moved furi_hal_crc to LL; minor fixes
* CRC HAL rework to LL
* Purging STM HAL
* Brought back minimal DFU boot mode (no gui); additional crc state checks
* Added splash screen, BROKEN usb function
* Clock init rework WIP
* Stripped graphics from DFU mode
* Temp fix for unused static fun
* WIP update picker - broken!
* Fixed UI
* Bumping version
* Fixed RTC setup
* Backup to update folder instead of ext root
* Removed unused scenes & more usb remnants from staged loader
* CI updates
* Fixed update bundle name
* Temporary restored USB handler
* Attempt to prevent .text corruption
* Comments on how I spent this Saturday
* Added update file icon
* Documentation updates
* Moved common code to lib folder
* Storage: more unit tests
* Storage: blocking dir open, differentiate file and dir when freed.
* Major refactoring; added input processing to updater to allow retrying on failures (not very useful prob). Added API for extraction of thread return value
* Removed re-init check for manifest
* Changed low-level path manipulation to toolbox/path.h; makefile cleanup; tiny fix in lint.py
* Increased update worker stack size
* Text fixes in backup CLI
* Displaying number of update stages to run; removed timeout in handling errors
* Bumping version
* Added thread cleanup for spawner thread
* Updated build targets to exclude firmware bundle from 'ALL'
* Fixed makefile for update_package; skipping VCP init for update mode (ugly)
* Switched github build from ALL to update_package
* Added +x for dist_update.sh
* Cli: add total heap size to "free" command
* Moved (RAM) suffix to build version instead of git commit no.
* DFU comment
* Some fixes suggested by clang-tidy
* Fixed recursive PREFIX macro
* Makefile: gather all new rules in updater namespace. FuriHal: rename bootloader to boot, isr safe delays
* Github: correct build target name in firmware build
* FuriHal: move target switch to boot
* Makefile: fix firmware flash
* Furi, FuriHal: move kernel start to furi, early init
* Drop bootloader related stuff
* Drop cube. Drop bootloader linker script.
* Renamed update_hl, moved constants to #defines
* Moved update-related boot mode to separate bitfield
* Reworked updater cli to single entry point; fixed crash on tar cleanup
* Added Python replacement for dist shell scripts
* Linter fixes for dist.py +x
* Fixes for environment suffix
* Dropped bash scripts
* Added dirty build flag to version structure & interfaces
* Version string escapes
* Fixed flag logic in dist.py; added support for App instances being imported and not terminating the whole program
* Fixed fw address in ReadMe.md
* Rpc: fix crash on double screen start
* Return back original boot behavior and fix jump to system bootloader
* Cleanup code, add error sequence for RTC
* Update firmware readme
* FuriHal: drop boot, restructure RTC registers usage and add header register check
* Furi goes first
* Toolchain: add ccache support
* Renamed update bundle dir
Co-authored-by: DrZlo13 <who.just.the.doctor@gmail.com>
Co-authored-by: あく <alleteam@gmail.com>
* [FL-2431] SubGhz: fix Restart with an error (HardFault), while maintaining the RAW signal.
* Stream: fix adding maximum string length to arguments
* [FL-2419] SubGhz: fix flipper hang/Fatal Error when running edited Sub-GHz file.
* SubGhz: remove replace strcpy with strncpy, smaller text buffer and canary
* SubGhz: log key loading before load happen, rollback only rx message handling
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* Storage: correct replacement for "/any" path in path holder
* Unit tests: storage, blocking file open test
* File stream: error getter
* Storage: common copy and common remove now executes in external thread
* Filesystems: got rid of unused functions
* Storage: untangle dependencies, ram-frendly filesystem api
* iButton: context assertions
* Storage: pubsub messages
* Storage: wait for the file to close if it was open
* Storage: fix folder copying
* Storage: unit test
* Storage: pubsub documentation
* Fix merge error
* Fix memleak in storage test
* Storage: remove unused define
Co-authored-by: あく <alleteam@gmail.com>
* gpio, hsem, crypto: switch from HAL to LL/registers
* Moved GPIO initialization to furi_hal
* More HAL removed
* All HAL modules disabled
* HAL is finally removed
* hal_gpio -> furi_hal_gpio, main.h removed
* Bootloader build fix
* RTOS config moved to freertos-glue
* delay -> furi_hal_delay
Co-authored-by: あく <alleteam@gmail.com>
* FuriHal: refactor interrupts subsystem
* Furi,FuriHal: gather all ISRs under interrupt API, improve crtitical section and cleanup garbage
* FuriHal: mirgate ipcc and hsem to LL
* Format Sources
* FuriHal,BleGlue: move to new critical section
* Format Sources
* FuriHal: correct flash locking
* FuriHal: replace critical section with interrupt disable in OS routine, minor fixex
* FuriHal: new speaker HAL
* FuriHal: drop PWM
* FuriHal: move COMP1 to LL
* FuriHal: move COMP1 to LL backport to F6
* FuriHal: remove missing gpio_rfid_carrier from F6
* FurHal: use LL for system controls in flash HAL
* Drop F6 source tree
* Drop F6 from GitHub workflow
* Tie USE_FULL_ASSERT with APP_UNIT_TESTS
* Speaker: return to old volume calculation
* FreeRTOS: move TCB header to glue
Co-authored-by: DrZlo13 <who.just.the.doctor@gmail.com>
* Fix TextBox word wrap behavior
* Wrap width is 120 pixels, not 140. (140 is larger than the screen!)
* Glyph width already includes spacing; don't add 1 additional px
* When starting a new line, include wrapped glyph width in new line_width.
* Call canvas_set_font before text_box_insert_endline so that glyph
width is calculated using correct font.
Previous approach worked somewhat well using default TextBoxFontText but
this version is more robust, particularly when using TextBoxFontHex.
* Add basic Mifare DESFire reading, file/app browser
* Fix build with APP_ARCHIVE=0
* Add bool type to flipper_format
* Add ability to save and load DESFire card data
* Skip over NfcSceneDeviceInfo when viewing saved DESFire info
* mf_df_clear: don't leak master key settings key versions
* When opening a DESFire card from Archive, retain UID emulation behavior
* rm unnecessary \r\n
* show Popup instead of leaving view in bad state
* Move NfcReaderRequestData out of union
This makes it safe to emulate DESFire/EMV without clobbering card data.
* Display saved DESFire cards via NfcSceneDeviceInfo
* Display and save file metadata even when contents are missing
This can happen when a file doesn't allow unauthenticated reads (see the
call to mf_df_parse_read_data_response in nfc_worker.c).
Co-authored-by: Kevin Wallace <git+flipperzero@kevin.wallace.seattle.wa.us>
Co-authored-by: あく <alleteam@gmail.com>
Co-authored-by: gornekich <n.gorbadey@gmail.com>
* Streams: string stream
* String stream: updated insert/delete api
* Streams: generic stream interface and string stream implementation
* Streams: helpers for insert and delete_and_insert
* FFF: now compatible with streams
* MinUnit: introduced tests with arguments
* FFF: stream access violation
* Streams: copy data between streams
* Streams: file stream
* FFF: documentation
* FFStream: documentation
* FFF: alloc as file
* MinUnit: support for nested tests
* Streams: changed delete_and_insert, now it returns success flag. Added ability dump stream inner parameters and data to cout.
* FFF: simplified file open function
* Streams: unit tests
* FFF: tests
* Streams: declare cache_size constant as define, to allow variable modified arrays
* FFF: lib moved to a separate folder
* iButton: new FFF
* RFID: new FFF
* Animations: new FFF
* IR: new FFF
* NFC: new FFF
* Flipper file format: delete lib
* U2F: new FFF
* Subghz: new FFF and streams
* Streams: read line
* Streams: split
* FuriCore: implement memset with extra asserts
* FuriCore: implement extra heap asserts without inventing memset
* Scene manager: protected access to the scene id stack with a size check
* NFC worker: dirty fix for issue where hal_nfc was busy on app start
* Furi: update allocator to erase memory on allocation. Replace furi_alloc with malloc.
* FuriCore: cleanup memmgr code.
* Furi HAL: furi_hal_init is split into critical and non-critical parts. The critical part is currently clock and console.
* Memmgr: added ability to track allocations and deallocations through console.
* FFStream: some speedup
* Streams, FF: minor fixes
* Tests: restore
* File stream: a slightly more thread-safe version of file_stream_delete_and_insert
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* usb service, removed power observer
* fix usb restart after disable
* remove usb service from apps
* Applcations: remove dead extern
* New thread naming scheme for drivers
* New thread symbol naming scheme for drivers
Co-authored-by: あく <alleteam@gmail.com>
* Power: wait a little bit till message displayed on screen when executing power off. FuriCore: do not use bkpt in release builds(causing HardFault when SPI is active).
* Cleanup BSS section: add more consty consts to be more constish.
* Desktop: properly handle autostarted applications.
* Power, USB, LED driver improvements
* u2f hid descriptor fix
* variable_item_list: value alignment fix
* InputTypeRepeat handling in menu/submenu/var_item_list
* lp5562: fix bugs on 400khz i2c
* Scripts: lint in parallel.
* FuriHal: rename some USB structure to match naming convention. Drivers: update magic values in LP5562.
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* SubGhz: add new method of obtaining a manufactory code subghz_protocol_keeloq_common_magic_xor_type1_learning
* TextInput: checking for a lock on a file with the same name
* TextInput: fix checking for a lock on a file with the same name
* Assets: rename and recompile
* TextInput: added picture and timer to turn off blob
* TextInput: Fix graphics
* TextInput: fix validator
* Validators: Add validator is file
* TextInput: fix callback validator_is_file_alloc
* SubGhz: add propocol GNS (dimamic), Beninca/Alcatic, Elmes
* SubGhz: fix function description
* Gui: correct timer routine on deallocation
* Format sources
Co-authored-by: あく <alleteam@gmail.com>
* Fix Desktop crush: stub dolphin stats
Fix Desktop crash on butthurt > 11, so hardcoded animations
are always available. Stub good dolphin stats till
correct deeds management implemented.
* Update ReadMe to match real project structure.
Co-authored-by: あく <alleteam@gmail.com>
* Makefile, Scripts: new linter
* About: remove ID from IC
* Firmware: remove double define for DIVC/DIVR
* Scripts: check folder names too. Docker: replace syntax check with make lint.
* Reformat Sources and Migrate to new file naming convention
* Docker: symlink clang-format-12 to clang-format
* Add coding style guide
* Furi, FuriHal, Desktop: much better crash handling. So wow.
* FuriHal: add missing include in FreeRTOSConfig.h
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* Lib: always include rfal
* Gui: remove screen_stream
* Input: decouple from Cli
* Loader: decouple from Cli
* Desktop: ignore missing favorite app, decouple from Archive
* Make: make Notification a Gui dependency
* Make: embed debugging information into elfs
* Loader: hide Plugins submenu when plugins ga arimasen
* Applications: update on start hook usage
* Loader: fix dead lock on menu rebuild with open rpc, new cli command.
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* U2F implementation prototype
* U2F data encryption and store, user confirmation request
* remove debug prints
* fix notification bug in chrome
* split u2f_alloc into u2f_init and u2f_alloc
* typo fix, furi-hal-trng -> furi-hal-random
* rand/srand redefinition
* SubGhz: a little bit of Dante.
* u2f_data naming fix
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* SubGhz: refactoring GUI ReadRAW
* SubGhz: replacing memcpy with strcpy
* SubGhz: fix button name "Mode", fix delete scene, fix show name when loading a key
* SubGhz: refactoring GUI SubGhz
* scene_manager: add exit from last scene API
* subghz: stop scene manager before stopping view dispatcher
Co-authored-by: gornekich <n.gorbadey@gmail.com>
Co-authored-by: あく <alleteam@gmail.com>
* Libs: add FreeRTOS submodule. FuriHal: replace ST provided FreeRTOS with original one. FuriHal: for cmsis os hal and patch it for better compatibility with stream buffer.
* Makefile: fix svd plugin on blackmagic
* Lib: update STM32CubeWB package. Project: update project to match new cube package.
* Lib: properly rebase and upload STM32CubeWB
* BleGlue: switch ack logging level to trace
* Fixed the "ibutton can only emulate after reading" bug
* Fixed previous fix. FIXES FOR THE FIX GOD! BUGS FOR THE BUG THRONE!
* Fixed "Repeat code" position on code input screen
* Changed CAME protocol icon
* Brewfile: add imagemagick missing assets compiler dependency
* Correct fix for "Repeat code" position on code input screen
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* SubGhz: add worker subghz_txrx
* SubGhz: added support for transferring Russian characters and support for backspace in CLI subghz_txrx
* SubGhz: refactoring subghz_txrx_worker, added a callback for accepting data in an empty one RX buffer
* SubGhz: fix conflict
* SubGhz: fix syntax errors
* Cli: document string_move usage and its behavior
* FuriHal: update subghz api and documentation. Subghz: move chat to subghz cli subcommand.
* Subghz: update text in chat cli
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* FuriHal: SPI refactoring, flexible bus reconfigration on fly, same desiag as i2c.
* Lib: update CC1101 driver documentation
* FuriHal: update spi symbol names to match naming convention.
* Project: fix release build, replace asserts with checks.
* FuriHal: i2c refactoring, new bus access model, flexible bus gpio configuration.
* FuriHal: set i2c pins to high on detach.
* FuriHal: more i2c bus events, put bus under reset when not used, move bus enable/disable routine to bus handler.
* FuriHal: fix i2c deadlock in power api, add external i2c handle.
* Notification: add sequence_single_vibro
* SubGhz: optimizing the performance of the GUI ReadRAW
* SubGhz: full highlighting of the default filename on save
* SubGhz: add man Leopard, Faraon, Reff, ZX-750, Back_SL-B9, fix syntax
Co-authored-by: あく <alleteam@gmail.com>
* [FL-2051] BadUsb: new GUI
* add missing assets
* skip empty lines and leading spaces
* SubGhz: add alignment check to keystore mess with iv routine
Co-authored-by: あく <alleteam@gmail.com>
* subghz_keystore_mess_with_iv shortened
- less instructions
- less registers used (no need for r3 anymore)
* subghz_keystore_mess_with_iv shortened (again)
* 7b46c12e408cdc541e9e91c0392365bb4960fabd reduced instructions count from 4+16x8=132 to 3+16x7=115
* here loop is removed and reduces all to only 15 instructions
* branch label is kept to preserve original intent and for historical record
* SubGhz: GUI RAW Read view
* SubGhz: GUI Read RAW refactoring
* SubGhz: fix bug wrong frequency of the allowed transmission
* GUI Read RAW refactoring
* SubGhz: fix set the default frequency
* SubGhz: fix save filename when returning from another menu
* SubGhz: fix Send and Back button behavior
Co-authored-by: あく <alleteam@gmail.com>
* [FL-2010] furi-hal-vcp rework
* Fix connect state change on vcp enable
* New thread naming scheme and stack size adjustment.
* Applications: rename worker threads to match new naming scheme.
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* SubGhz: add save key in flipper file format
* [FL-2005] SubGhz: fix stored signals cannot be deleted
* SubGhz: add load key in flipper file format
* SubGhz: fix syntax
* SubGhz: fix bad file upload
* Storage: add function to get the next free filename
* SubGhz: add save RAW in flipper file format
* SubGhz: add load RAW in flipper file format
* SubGhz: refactoring protocol
* SubGhz: refactoring scene
* SubGhz: fix SubGhzNotificationState define
* Makefile: proper comapre for FORCE
Co-authored-by: あく <alleteam@gmail.com>
* Toolbox: fix null pointer dereference in manchester decoder.
* FuriHal: use MPU to protect from null pointer dereference, replace flash driver with our own implementation.
* SubGhz: add file with manufactory codes, and the ability to add your own manufactory codes for KeeLog
* SubGhz: add encrypt RAW data, add decrypt and get RAW data
* SubGhz: add encrypt magic_xor_atomo
* SubGhz: parsing atomo using file encrypt
* SubGhz: fix calculating the size of the read buffer
* SubGhz: parsing Nice FLOR S using file encrypt
* SubGhz: add file encrypt nice_flor_s_tx, fix name load file
* SubGhz: fix checking read buffer size
* Update subghz_keystore.c
* SubGhz: fix calculating the size of the read buffer
Co-authored-by: あく <alleteam@gmail.com>
Removing SD card during brut-force causes endless loop.
This is because calling a string_t destructor invalidates
variable, but we did checking string_size() after.
Co-authored-by: あく <alleteam@gmail.com>
* Core: wipe memory after free. RFID,iButton: fix iterator use after invalidation.
* Debug: support unix wildcards for register matching in svd, update MCU description file and minify it.
* Toolbox: getter for File in FlipperFile.
* Makefile: conditional flashing
* SubGhz: keeloq_mfcodes encryption tool.
* FuriHal: proper IV handling on CBC in crypto. SubGhz: add support for encrypted keeloq keys. Makefile: move formatting to top Makefile.
* SubGhz: rename some function names to match naming scheme.
* SubGhz: encryption tool, fix windows line endings
Co-authored-by: DrZlo13 <who.just.the.doctor@gmail.com>
* File_Worker: getting the name of a new file with an index
* SubGhz: add decoder RAW protocol
* SubGhz: add view Save RAW
* SubGhz: refactoring subghz custom event
* SubGhz: fix syntax
* SubGhz: fix error build
* SubGhz: test build
* SubGhz: refactoring subghz, add rename, delete, start and emulate RAW signal
* SubGhz: fix triangle glitch in save raw view
* SubGhz: fix receiver config scene
* SubGhz: fix transfer after returning from save scene
* Canvas: add font rotation
* SubGhz: raw protocol encoder
* SubGhz: fix error completion of transfer raw encoder
* SubGhz: increased the speed of reading RAW data from a flash drive, displaying the name of the saved file in the Save RAW scene
* Canvas: fix font rotation
* SubGhz: fix navigation save RAW scene
* SubGhz: add decode came atomo
* Git: renormalize
* Cleanup sources and enums
* Gui: add font direction to canvas reset, canvas init sequence cleanup.
* SubGhz: reorder menu.
* Gui: correct canvas_set_font_direction signature
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* Scripts: add flipper lib, migrate ob to flipper lib, update ob.data
* Makefile: speedup build with phony target for .d files
* FuriHal,U8G2: full MGG display support and ERC contrast tuning.
* Desktop: fix dolphin rename artifact.
* Scripts: port otp.py to flipper scripting lib.
* Scripts: add wipe and core1 flashing to flash.py, remove obsolete shell scripts
* Scripts: replace core1 flashing script with global makefile.
* Scripts: final touches and migration to python. Root Makefile for everything.
* RPC: Add App start, lock status
- Add RPC commands Application start, lock status acquiring.
- Write tests for RPC App system.
- Replace Unit Tests application with CLI command. This is for CI needs and for tests that run application.
* Fix NDEBUG build
* Update PB submodule
* Fix RPC print (ENABLE DEBUG PRINT!)
* snprintf -> string_t
* Fix Hard Fault (early mutex free)
* printf -> string_t, format, enable tests
* Update submodule: protobuf
* Applications: rollback unit test naming scheme.
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* ToolBox: add manchester-decoder and manchester-encoder
* SubGhz: add new FM config cc1101
* Subghz: add protocol Kia
* SubGhz: fix receiving the last packet Nero Radio
* SubGhz: app protocol CAME Twin (TW2EE/TW4EE)
* SubGhz: add protocol CAME Atomo (AT03EV/ AT04EV)
* F7: sync with F6
* SubGhz: add frequency analyzer
* SubGhz: remove space from file name
* SubGhz: frequency analyzer add filter and fix view
* [FL-1939] GubGhz: Frequency analyzer redesign
* SubGhz: fix incorrect subghz api call sequence in frequency analyzer worker
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* Lib: new flipper file format library
* Lib: flipper file format cpp wrapper
* Storage: simple function for remove file and check error
* iButton app: remove file worker, use new flipper file format instead
* Dialogs: storage error message
* Storage: simple function for mkdir and check error
* iButton app: error messages
* Libs: update makefile
* RFID app: remove file worker, use new flipper file format instead
* Flipper File: library documentation
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* nfc: fix notifications in read EMV sequence
* nfc: set focus on previously saved card
* nfc: add incorrect file format message
* mifare ultralight: increase size of max dump
* elements: draw multiline text only until it fits screen
* nfc: support variable PAN number length
* nfc: change AID display
* nfc: change worker custom event to prevent scene reenter
* nfc: double check for PAN tag
* nfc: fix edit card name appearance
* Nfc: read EMV card without name if PDOL is present.
* Desktop: increase unlock key press interval, switch to OS ticks instead of HAL.
* Desktop: remove debug logging
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* FuriHal: add charge suppress API.
* FuriHal: add guards to insomnia and charge suppress routines.
* FuriHal: proper API for scheduler in power.
* FuriHal: move charging control from critical section, fix deadlock.
* Gui: use FreeRTOS native timers controls for IconAnimation, fix crash on animation start stop
* menu: remove dead code
* loader: change views from modules instead of menu service
* dolphin: start main menu with loader API
* applications: don't start menu service
* loader: add debug tools menu
* gui modules: introduce menu model
* loader: remove calls to menu service API
* gui modules: implement menu module
* loader: add menu view
* gui menu: add animation
* applications: remove menu service
* gui modules: rename icon_menu -> menu
* loader: clean up code
* menu module: add documentation, format code
* menu: remove unused parameter
* desktop: use loader to launch primary menu
* Applications: cleaner makefile app declaration. Loader: application autostart
* Gui: cleanup menu and submenu API.
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* [FL-1811] FuriHal: move core2 startup to hal init stage, prevent working with flash controller till core2 startup finish. #704
* SubGhz: fix GO0 low on last hop transmission, decreased DutyCycle in tests
* SubGhz: test_static fix max 5 sec in transmission mode, DutyCycle <23%
* [FL-1815] SubGhz: prohibiting transmission if it is not within the permitted range for the given region
* SubGhz: fix F7 furi-hal-subghz
* SubGhz: fix logic working tests
* SubGhz: fix princeton encoder for test
* SubGhz: add log princeton encoder
* [FL-1856] Subghz: fix output a double error if the file cannot be opened
* [FL-1851] SubGhz: add deleting Stored Signals in SubGHz App
* SubGhz: add rename file SubGhz app
* SubGhz: update stats message in princeton
* SubGhz: correct spelling
* SubGhz: fix FM config, add hardware signal processing less than 16 μs, add added filter for processing short signals
* SubGhz: add Scher-Khan MAGICAR Dinamic protocol
* SubGhz: sync fury targets
Co-authored-by: あく <alleteam@gmail.com>
* WidGet: fix name Multiline String Element
* SubGhz: rename SubGhzProtocol to SubGhzParser and bring it up
* SubGhz: a new way to navigate in receiver views
* SubGhz: fix syntax
* WedGet: add forwarding input type to wedget button callback, fix using a callback in an application
* SubGhz: add assertions and status checks
* SubGhz: fix syntax
* [FL-1790] SubGhz: fix GateTX
* SubGhz: add 434.42 MHz frequency support
* SubGhz: rename type protocol, add decoder stage names
* SubGhz: fix navigation through received signals when changing scenes
* SubGhz: fix 2-fsk config
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* SubGhz: refactoring
* WeGet: Add support for outputting formatted lines, events center button pressed, center button released
* Variable Item: slightly changed the display of data on the screen
* SubGhz: add show errors, add show preset, refactoring
* SubGhz: refactoring transmitter
* SubGhz: removed unused modules
* SubGhz: Add FuriHalSubGhzPresetOok270Async setting menu
* SubGhz: fix annotation
* SubGhz: add support Nero Radio
Co-authored-by: あく <alleteam@gmail.com>
* Gui: move rotation logic to ViewPort, replace delayed View switch in ViewDispatcher with event filtering and redirection to previous view.
* SubGhz: add function description
* Gui, Input: add event id to input events.
* SubGhz: fix "crashing on ?"
* SubGhz: add icon scanning
* SubGhz: updated interface read scene, updated interface config scene
* Assets: update subghz assets
* SubGhz: replaced the picture in the read scene, changed the paths to additional files
* SubGhz: fix deadlock in timer callback
* SubGhz: fix icon read scene
* SubGhz: fix icon read scene
* SubGhz: fix duble text transmitter scene
* SubGhz: correct spelling. Gui: bigger queue for ViewDispatcher.
* SubGhz: fix creation and transmission of dynamic code without the presence of a manufactory key
* SubGhz: fix keelog, setting a name in the absence of a manufactory key
* SubGhz: fix load bad keelog key
* Format sources
* Furi: remove garbage from core. GpioTester: fix memory leak and cleanup
* Accessor: remove obsolete notification code
* MusicPlayer: remove input event injection
* Input: rename id to sequence
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* SubGhz: fix assert on worker double stop.
* SubGhz: add hopping mode (315.00, 433.92, 868.00)
* SubGhz: add support for new alarms on the keelog protocol
* SubGhz: update te in princeton protocol
* SubGhz: move static to tests, rename sniffer to hopper/auto, remove delay from timer thread, optimize locking strategy.
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* SubGhz: Add millis() furi, add subghz history struct
* SubGhz: Fix subghz history
* Gubghz: Fix code repeat history, add clean history
* SubGhz: reading and adding keys to history
* Gui: Renaming Sub 1-Ghz -> SubGhz
* Archive: Renaming Sub 1-Ghz -> SubGhz
* SubGhz: Add menu history, modified button for sending a signal, changed output of data about accepted protocol
* Archive: Fix name subghz
* SubGhz: Menu navigation
* Assets: Add assets/SubGHz/icon.png
* Assets: add new icons for subghz
* SubGhz: Fix name Add manually scene
* SubGhz: Fix load icon Read scene. rename encoder struct, rename protocol function load from file, add load raw data protocol, add info pleasant signals all protocol
* SubGhz: fix memory leak
* SubGhz: change of receiving frequency for read scene
* SubGhz: Add save/load frequency and preset, add automatic configuration of transmit/receive to the desired frequency and modulation, add button "save" config scene
* SubGhz: Fix frequency and preset, fix frequency add manualli scene, fix re-executing the parser
* Furi-hal-subghz: add 2-FSK config, fix ook config 650KHz BW Tx filter
* Fix formatting and release build
* SubGhz: Delete read scene
* SubGhz: Fix frequency add manualli scene, refactoring code
* SubGhz: 2 profiles for OOK, fix broken build.
* SubGhz: Add passing static codes from read scene, add notification read scene, refactoring code
* SubGhz: fix assert on worker double stop.
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* assets: add EMV AID table for NFC app
* file-worker: add searching for value by the key
* nfc: add emv parser helpers
* assets: add country and currency codes
* nfc: add country and currency code parsing
* emv_decoder: add country and currency code support
* nfc: add AID. currency and country display
* nfc: rework bank_card view
* nfc: add currency and country save
* assets: change emv chip asset
* nfc: change asset in bank card
* gui: add frame element to widget
* nfc: add bank card frame, add documentation
* rfal: fix long APDU command emulation
* nfc: fix typos
* Scripts ReadMe: assets delivery command
Co-authored-by: あく <alleteam@gmail.com>
Co-authored-by: DrZlo13 <who.just.the.doctor@gmail.com>
- Restrict with 31 bytes length for remote and signal name
- Don't stuck for 0 PWM cycle timings
- Support timings > 65535 PWM cycles
- Fix remote file open error
- Add IRDA TX debug redirect
- Add remote parse error print, improve parsing, support tabs
- Fix stucks with uncorrect RAW signal values, long strings in remote file, etc
- Fix HAL signals capturing (save previous read value)
- Fix leak in case of failed parsing
* Storage-cli: the file write function is splitted into a function for working with text and function for raw data
* Storage-cli: read_chunks, renamed write_raw to write_chunk
* Storage-cli: fix typo
* SD Hal: fixed wrong read/write block address
* HAL-console: printf
* Storage benchmark: more popular sizes
* Toolbox: md5
* Storage-cli: better read_chunks function, md5 hash function
* Notification: fixed incorrect error message when loading settings
* Storage-cli: stat command
* Storage-cli: stat, "/" is also storage
* Scripts: add storage managment script
* Scripts, storage lib: send command with known response syntax instead of SOH
* Scripts: python3 from env
* Storage-cli: fixed mess with error texts
* Storage-cli: write, show welcome message only if we didn't have any errors
* Storage: poorly fixed folders copying
* Storage: close an old file if an error occurred while opening a new file
* Storage-cli: fixed storage info spacing
* Scripts: use positional arguments in storage.
* Scripts: explicit string encoding and decoding, documentation in comments.
Co-authored-by: あく <alleteam@gmail.com>
* FuriHal: update STM32CubeWB to latest version.
* Makefile: debug other script
* FuriHal: correctly handle 0 size transfers in VCP
* Dolphin: cleanup and minor timer tuning.
* FuriHal: update FreeRTOS config with bigger timer command queue.
* FuriHal: delayed irq enabling, fixes missing ticks.
* FuriHal: use SFSA to determine free space for internal FS, update linker script to use as much space as theoretically possible.
* Scripts: update core2 flashing scripts and OB data.
* Github: bundle resources, core2 firmware and supplementary data.
* GitHub: versioning for supplemental artifacts
* SubGhz: the functions of saving loading KeeLog have been modified, saving KeeLog is prohibited
* SubGhz: Fix displaying Nice FlorS in the Raed scene
* SubGhz: Fix displaying Faac SLH in the Raed scene
* SubGhz: Fix displaying iDo in the Raed scene
* SubGhz: Fix displaying Star Line in the Raed scene
* SubGhz: Fix displaying Nice Flo in the Raed scene, added save and load functions. (testing needed, no remote control)
* SubGhz: subghz_beginadded common encoder upload signal
* SubGhz: add Came encoder
* SubGhz: modified pricenton encoder, fix view transmitter hide the "Send" button if there is no encoder
* SubGhz: add nice flo encoder, need testing no remote control
* SubGhz: add gate_tx encoder
* SubGhz: add nero_sketch encoder
* SubGhz: add keelog encoder
* SubGhz: add long upload upload while the button is pressed while releasing the transfer is over, with a check for sticking (maximum 200 upload repetitions)
* SubGhz: fix max upload
* SubGhz: Fix structure subghz add encoder
* SubGhz: add generating and sending a dynamic keelog key, refactoring the code
* SubGhz: add notifications
* SubGhz: add creating a new remote control (Pricenton, Nice Flo 12bit, Nice Flo 24bit, CAME 12bit, CAME 24bit, Gate TX, DoorHan)
* SubGhz: Fix load file, fix scene start
* Subghz: Fix show key
* SubGhz: Fix subghz_cli
* SubGhz: Fix furi-hal-subghz
* Format sources
* SubGhz: standard notification scheme, fix broken assert in DMA.
* SubGhz: move level alignment logic to furi-hal-subghz, fix spelling, cleanup.
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* FuriHal: port spi to ll. Bootloader: add spi and display.
* Makefile: rollback disabled freertos introspection
* FuriHal: spi lock asserts. F6: minor cleanup port sdcard shenanigans to furi_hal_gpio.
* SdCard: port missing bits to furi-hal-gpio
* FuriHal: fix broken RX in SPI, update SPI API usage. RFAL: more asserts in SPI platform code.
* GUI: clear canvas on start. FuriHal: no pullup on radio spi bus.
* FuriHal: use check instead of assert in spi lock routines
* FuriHal: remove timeouts
* SdHal: add guard time to SDCARD CS PIN control.
* FuriHal: proper name for SPI device reconfigure routine. SdHal: one more enterprise delay and better documentation.
* Bootloader: update DFU text and add image.
* FuriHal: drop unused ST HAL modules.
* SdHal: fixed swapped hal_gpio_init_ex arguments
* SpiHal: fixed swapped hal_gpio_init_ex arguments
* IrdaHal: use hal_gpio_init instead of hal_gpio_init_ex
* RfidHal: fixed swapped hal_gpio_init_ex arguments
Co-authored-by: DrZlo13 <who.just.the.doctor@gmail.com>
* Lib: add random name library
* Text_input: add default text clearing
* All: rework all applications with new text_input API
* Nfc: fix removing dev file on save_name scene enter
* Lib: move all free radicals to toolbox and update API usage.
Co-authored-by: あく <alleteam@gmail.com>
* FS-Api: removed datetime manipulation functions and most of the file flags
* Filesystem: common proxy api
* Filesystem: renamed to Storage. Work has begun on a glue layer. Added functions for reentrance.
* Storage: sd mount and sd file open
* Storage: sd file close
* Storage: temporary test app
* Storage: free filedata on close
* Storage: sd file read and write
* Storage: added internal storage (LittleFS)
* Storage: renamed internal commands
* Storage: seek, tell, truncate, size, sync, eof
* Storage: error descriptions
* Storage: directory management api (open, close, read, rewind)
* Storage: common management api (stat, fs_stat, remove, rename, mkdir)
* Dolphin app and Notifications app now use raw storage.
* Storage: storage statuses renamed. Implemented sd card icon.
* Storage: added raw sd-card api.
* Storage settings: work started
* Assets: use new icons approach
* Storage settings: working storage settings
* Storage: completely redesigned api, no longer sticking out FS_Api
* Storage: more simplified api, getting error_id from file is hidden from user, pointer to api is hidden inside file
* Storage: cli info and format commands
* Storage-cli: file list
* Storage: a simpler and more reliable api
* FatFS: slightly lighter and faster config. Also disabled reentrancy and file locking functions. They moved to a storage service.
* Storage-cli: accommodate to the new cli api.
* Storage: filesystem api is separated into internal and common api.
* Cli: added the ability to print the list of free heap blocks
* Storage: uses a list instead of an array to store the StorageFile. Rewrote api calls to use semaphores instead of thread flags.
* Storage settings: added the ability to benchmark the SD card.
* Gui module file select: uses new storage api
* Apps: removed deprecated sd_card_test application
* Args lib: support for enquoted arguments
* Dialogs: a new gui app for simple non-asynchronous apps
* Dialogs: view holder for easy single view work
* File worker: use new storage api
* IButton and lfrrfid apps: save keys to any storage
* Apps: fix ibutton and lfrfid stack, remove sd_card_test.
* SD filesystem: app removed
* File worker: fixed api pointer type
* Subghz: loading assets using the new storage api
* NFC: use the new storage api
* Dialogs: the better api for the message element
* Archive: use new storage api
* Irda: changed assest path, changed app path
* FileWorker: removed unused file_buf_cnt
* Storage: copying and renaming files now works between storages
* Storage cli: read, copy, remove, rename commands
* Archive: removed commented code
* Storage cli: write command
* Applications: add SRV_STORAGE and SRV_DIALOGS
* Internal-storage: removed
* Storage: improved api
* Storage app: changed api pointer from StorageApp to Storage
* Storage: better file_id handling
* Storage: more consistent errors
* Loader: support for NULL icons
* Storage: do nothing with the lfs file or directory if it is not open
* Storage: fix typo
* Storage: minor float usage cleanup, rename some symbols.
* Storage: compact doxygen comments.
Co-authored-by: あく <alleteam@gmail.com>
* [FL-1489] IRDA: move to FileWorker, fixes
* Use FileWorker
* Use file_select to select remotes
* Fix some crashes
* Add RAW parsing restrictions
* Remove excess scene (LearnDoneAfter)
* Move all file system logic to standalone object
* Firmware: drop F5 target
* Rename app-loader to loader
* Update code owners file
* Loader: global application start lock API, minor refactoring
* Archive: update loader usage
* Cli: Command flags, global application start lock
* Apps: update cli API usage
* Bootloader: minor refactoring
* Firmware: minor build refactoring
* SubGhz: GUI packet test
* SubGhz: drop packet transmission and unused presets
* Github: drop F5 from build
* Archive: favorites
* Archive: a little bit more of Favorites
* Add RAW format
* F5 stubs for build to pass
* Fix saving decoded signal error
* Irda: set ISR before starting timer, remove explicit NVIC configuration
Co-authored-by: あく <alleteam@gmail.com>
* gui: refactore ViewNavigator -> SceneManager
* view_dispatcher: remove scene controller, add custom and navigation cb
* scene_manager: rework scene controller, move AppScene from lib
* nfc: rework nfc scenes with new scene controller API
* view_dispatcher: crash on free if not all views were freed
* nfc: introduce scene declaration
* scene_manager: allocate and configure application scenes
* nfc: rework nfc with new Scene Manager API
* scene_manager: remove dublicated scene handlers allocation
* nfc: rework nfc app with new scene manager API
* view_dispatcher: add tick event
* scene_manager: add tick event type and handler
* nfc: rework notifications with tick event
* scene_manager: remove scene id from scene structure
* scene_manager: rename array -> stack, add documentation
* api-hal-nfc: remove listen activation processing
* nfc_scene_start: shorter submenu call
* nfc: fix nfc file name
* nfc: fix Retry in mifare ul success read
* nfc_cli: fix read timeout in nfc_detect CLI command
Co-authored-by: あく <alleteam@gmail.com>
* nfc: add scripts menu scene
* canvas: add glyph width api
* app_scene: add state to Scene template
* gui: introduce TextBox view
* nfc: add mifare ultralight read scenes
* nfc: add mifare ultralight menu scene
* nfc: fix scene functions declaration
* Gui: use size_t for sizes.
Co-authored-by: あく <alleteam@gmail.com>
* SubGhz: changing the operation of the capture timer, and the logic of the work of parsers
* Add toolbox lib. Move levels to toolbox. Subghz switch to levels.
* Subghz: update worker signatures
* SubGhz: pluggable level duration implementations.
* SubGhz : test drawing pictures in Gui
* SubGhz: Added a callback with the parser structure as argument
* SubGhz: copy protocol data to model
* SubGhz: refactoing code
* SubGhz: cleanup and format sources
* SubGhz: remove comments
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
Co-authored-by: DrZlo13 <who.just.the.doctor@gmail.com>
* GUI: Icons and IconsAnimation refactoring. Switch assets to new Icon API.
* Gui: icon and animation draw now do not accept null pointer
* Format Sources
* Fix no debug build
* Furi: stricter checks in memmgr
* ApiHal: set frequency and path in one go. Drivers: proper frequency registers calculation for CC1101. Update subghz cli to match new api.
* SubGhz: preparation for parsers porting, tim2 sharing
* ApiHal: add interrupts API, move all TIM2 related things there.
* SubGhz: refactor protocol lib and add keeloq.
* SubGhz: proper init_set for keeloq manafacture key
* SubGhz: port more protocols to lib
* SubGhz: load keeloq manufacture keys from sd card (if any).
* SubGhz: format output from protocols.
* SubGhz: use default frequency in subghz_rx cli command.
* SubGhz: keeloq key types
* Fix compillation error when internal storage disabled
* SubGhz: minor cleanup
* SubGhz: properly handle timeout and reset signal in subghz_rx
* SubGhz: Worker, Capture View. Furi: emulate thread join.
* SubGhz: free strings on keeloq key load end
* SubGhz: update protocols reporting API, app refactoring and capture view, update API HAL usage.
* SubGhz: update dump formatting
* ApiHal: backport subghz preset to F5
* ApiHal: backport subghz frequency range to F5
* Update MLib to latest master.
* Archive: update string_t usage, add unsafe usage TODO, change model type to blocking and fix invalid usage.
* Gui: update text_input API and it's usage.
* fix blocking model issues
* fix unsafe string_t usage
Co-authored-by: Igor Baranov <bedtimeposts@gmail.com>
Co-authored-by: its your bedtime <23366927+itsyourbedtime@users.noreply.github.com>
* ibutton: long names partial fix\
* ibutton: limit max filename length to 22 chars
* elwrapping long names to a new line
* Proper m-string size usage
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* Add saving to SD-Card (not ready yet)
* Add saving to SD-card (done)
* Select previous menu item
* Fix central button
* Fix current_button
* Refactoring
* Add notifications
* [FL-1417] Add IRDA CLI
CLI commands:
1) ir_rx
Receives all IR-trafic, decodes and prints result to stdout
2) ir_tx <protocol> <address> <command>
Transmits IR-signal. Address and command are hex-formatted
* Fix BUG with random memory corruption at random time in random place in random universe in random unknown space and time forever amen
* Fix submenu set_selected_item
* Bring protocol order back
* Add TODO sdcard check
* GUI module submenu: fix documentation
* GUI module submenu: add submenu_set_selected_item fn
* App iButton: use submenu_set_selected_item to store and set selected item in submenu
* App iButton: swap write and emulate in "saved key menu" scene
* App iButton: file select can now switch to the previous selected file
* App iButton: swap write and emulate indexes in "saved key menu" scene
* Gui module file_select: work with separate extension
* iButton app: separate file managment, file error handling
* SD card api: custom error message
* iButton app: better file error handling
Co-authored-by: あく <alleteam@gmail.com>
* GUI module submenu: fix documentation
* GUI module submenu: add submenu_set_selected_item fn
* App iButton: use submenu_set_selected_item to store and set selected item in submenu
* App iButton: swap write and emulate in "saved key menu" scene
* App iButton: file select can now switch to the previous selected file
* App iButton: swap write and emulate indexes in "saved key menu" scene
Co-authored-by: あく <alleteam@gmail.com>
* Add cscope db generation
* Add api-hal-irda, TIM2: HAL->LL
* Add libirda: pwm decoding
* Universal state machine
* Add irda decoder library
* Move IRDA capture to standalone tool
* Add encoder/decoder samsung32, NEC, fix bugs
* Port current App to new Irda lib
* Fix clang format for test data
* Port IRDA api-hal to f6
Co-authored-by: あく <alleteam@gmail.com>
* Add littlefs submodule
* Furi: add mutex in logging, fix issues with corrupted printf
* ApiHal: disable debug traces in ble glue
* App-loader: more logs
* Passport: fix invalid DolphinState usage
* ApiHal, linker script: flash API is now aware of free space, complete abstraction layer for storage
* Internal Storage: littlefs based storage services with key value API. Migrate dolphin state to new storage API.
* Add bootloader versioning
* Move some logic to api-hal-version
* Backport to f4
* Dolphin: update version screen layout, make it more readable
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* API HAL SPI: refactoring, split into layers, prepare ST HAL separation. API HAL SubGhz: initialize on start. Drivers: add basic cc1101 driver. Update API usage. Debug: increase max debugger port speed. Remove subghz apps.
* CC1101: chip status handling. ApiHalSpi: increase SubGhz bus speed to 8mhz. F4: backport subghz initialization.
* Api Hal SubGhz: rx path and frequency. CC1101: frequency control.
* SubGhz Application: basic tests
* SubGhz app: tone and packet test. API HAL SUBGHZ: update configs, add missing bits and pieces.
* SD App: more specific sd api
* Gui: view dispatcher fix api documentation
* Gui: view holder thingy
* SD App: do not sleep when working with sd card bus
* SD App: queue-based lifecycle
* Assets: sd-card assets
* SD App: init file select api
Co-authored-by: あく <alleteam@gmail.com>
* rename old ibutton app to ibutton-test
* more renames
* updated onewire library compilation condition
* add submenu_clean subroutine
* add index for submenu callback
* c++ guard for gui modules
* add released ibutton app
* fix the position of the submenu window if there are too few items
* iButton app basis
* negative icon position info
* fix submenu_clean subroutine
* add ibutton app to applications makefile
* add onewire key read routine to read mode
* rename mode to scene
* rename files and folder (mode to scene)
* rename ibutton view to view manager
* rename get_view to get_view_manager
* cpp guards
* key read, store and notify features
* syntax fix
* make iButtonScene functions pure virtual
* fix syntax
* add text store, add new scene (crc error)
* not a key scene
* syntax fix
* read success scene
* app, switching to the previous scene with the number of scenes to be skipped
* scene whith menu when key is readed
* fix font height calculation, fix offsets
* add key write scene
* view_dispatcher_remove_view subroutine
* generic pause/resume os methods
* fix furi_assert usage
* key store, worker
* fix pointer comparsion
* saved keys, saved key action scenes
* key delete/confirm delete scenes and routines
* use last input subsystem changes
* fix syntax
* fix new model usage in submenu
* fix includes
* use vibro pin
* use stored key name if valid
* emulate scene
* random name generator
* name and save readed key scenes, new icon
* fix icon position
* fix text scene exit
* fix naming, fix text placement, new info scene
* state-driven cyfral decoder
* better cyfral decoder
* better cyfral decoder
* one wire: search command set
* metakom decoder
* more key types
* add next scene to error scenes
* universal key reader
* use new key reader
* syntax fix
* warning fix
* byte input module template
* new thread and insomnia api usage
* New element: slightly rounded frame
* Use elements_slightly_rounded_frame in text input
* Gui test app: byte input usage
* Byte input module: data drawing and selection
* Byte input: comment currently unused fns
* remove volatile qualifier
* base byte input realisation
* App gui test: remove internal fns visibility
* Byne input, final version
* test install gcc-arm-none-eabi-10-2020-q4-major
* test install gcc-arm-none-eabi-10-2020-q4-major
* App iButton: byte input view managment
* App iButton: add key manually scenes
* App iButton: rename scenes, add popup timeout
* App iButton: use new scenes, new fn for rollback to specific prevous scene.
* App iButton: remove byte input view on app exit
* App iButton: edit key scene
* Module byte input: reduce swintch value to uint8_t
* Module byte input: switch from switch-case to if, unfortunately we need compile-time constants to use with switch
* Icons: new small arrows
* Module byte input: new arrangement of elements
* OneWire slave lib: fix deattach sequence
* App iButton: pulse sequencer
* App iButton: add more keys to store
* App iButton: split key worker to separate read/write/emulate entitys
* App iButton: use new read/emulate entities
* fix callback pointer saving
* App iButton: use KeyReader error enum instead of KeyWorker error list handling
* App iButton: do not use insomnia fns in pulse sequencer
* App iButton: use KeyReader error enum in read scene
* OneWire slave lib: more READ ROM command variants, call callback only if positive result
* GPIO resources: add external gpio
* App SD/NFC: removed application
* App iButton-test: update to new light api
* App iButton: update to new light-api
* Outdated apps: add api-light-usage
* Gpio: update SD card CS pin settings
* API-power: added fns to disable/enable external 3v3 dc-dc
* API-gpio: separated SD card detect routines
* Resources: removed sd cs pin
* SD card: low level init now resets card power supply
* App SD-filesystem: use new card detect fns
* SD card: fix low level init headers
* SD card: more realilable low level init, power reset, exit from command read cycle conditionally
* App SD-filesystem: led notifiers, init cycling
* SD card: backport to F4
* Api PWM: add c++ guards
* App iButton: yellow blink in emulate scene, vibro on
* App iButton: one wire keys command set
* App iButton: successful write scene
* App iButton: key writer
* App iButton: syntax fix
* App iButton: notify write success
* App iButton: fix double scene change
* SD card: handle eject in init sequence
* SD card: api to set level on detect gpio
* SPI: api to set state on bus pins
* SD card: set low state on bus pins while power reset
* File select: init
* File select: fix input consuming
* SD Card: fixed dir open api error
* SD-card: replace strncpy by strlcpy. Fix buffer overflow error.
* API HAL OS: replace CMP based ticks with ARR based one, hard reset lptimer on reconfiguration.
* GUI: More stack size for (temporary, wee need to implement sd card api in separate thread)
* GUI: File select module.
* App iButton-test: remove obsolete app
Co-authored-by: rusdacent <rusdacentx0x08@gmail.com>
Co-authored-by: coreglitch <mail@s3f.ru>
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* add battery health reading from gauge
* add battery health reading to api-hal-power
* update battery health in power application
Co-authored-by: あく <alleteam@gmail.com>
* invert inputs
* move RFID RX to IRQ, unstable
* remove critical blink
* supress short carrier, decrease queue
* migrate to stream buffer
* enable state change
* conditions build for invert RFID IN
* move get_rfid_in_level
* use hal function for get comp level, remove duplicate interrupt registration, interrupt unregister on exit
* reinit comparator context on mode change
* Add F5 target, lp5562 driver and api-hal-light. Update api-usage, switch to F5 by default.
* API HAL: add i2c and hardware version api. Dolphin: show hardware version.
* OTP version generator and flashing utility.
* Assets script: fix code formatting
* Backport F5 changes to F4
* F4: disable insomnia, prevent damage to BLE RX path
* F5 HAL API Light: remove magic delay to fix magic BLE
* Dolphin: HW target validation on start
* invert RSSI indication in sub-1
* API HAL: rename board to body in version api
* Gpio tester: detach and release viewport on exit
Co-authored-by: aanper <mail@s3f.ru>
* Furi: replace obsolete furiac_exit with osThreadExit, drop obsolete apis and test. Rename systemd to flipper and move to separate file, cleanup. ApiHal: Rename timebase to os and move freertos hooks there, move insomnia api to power module.
* Furi: new thread helper
* Furi: cleanup thread documentation
* Flipper, AppLoader: update to use FuriThread. Update tasks signatures to match FuriThreadCallback signature.
* F4: rename API_HAL_TIMEBASE_DEBUG to API_HAL_OS_DEBUG
* Applications: rename FuriApplication to FlipperApplication, use FuriThreadCallback signature for apps.
* C++ app template sample, new exit method
* gui test app
* aligned string draw functions
* add canvas_invert_color, canvas_draw_button_left, canvas_draw_button_right
* use new str and button fns in dialog
* real dialog mockup
* add new gui test app recipe
* submenu module init
* delete unused variable
* move buttons to element, add canvas_string_width fn, new center button element
* button icons
* submenu module
* use submenu module, switch views
* keyboard buttons img
* new font for keyboard
* text input (keyboard) module
* add text input to gui test app
* add gui tesst app to release build, fix flags
* handle transition from start and end position, fix input switch
* add long text support to text input
* canvas_string_width and the underlying u8g2_GetStrWidth now return uint16_t
* remove deprecated libs and apps
* canvas_font_max_height fn
* new element, aligned multiline text
* use multiline text instead of plain string
* fix second keyboard row, rename uppercase fn
* qwerty-like keyboard layout
* new icons for iButton app
* better dialog text position and events handling
* remove confusing comment
* new extended dialog module
* extended dialog module usage
* update docs
* new gui module, popup with timeout
* popup usage
* canvas, remove outdated canvas_font_max_height, use canvas_current_font_height
* use furi check
* use new view_enter and view_exit callback for timers
* add DrZlo to gui tester codeowner
Co-authored-by: aanper <mail@s3f.ru>
* fix Werror flag
* strdup implementation fix
* fix irda and lfrdid printf
* remove unused position
* doubtful type fix
* type fix in EXTI interrupt
* fix warnings in CubeWB, need to fork ST repo
* onewire fixes
* fork STM32WB Cube repo
* SYSTEM: tickless mode with deep sleep.
* Move FreeRTOS ticks to lptim2
* API: move all sumbodules init routines to one place. Timebase: working lptim2 at tick source.
* API Timebase: lp-timer routines, timer access safe zones prediction and synchronization. FreeRTOS: adjust configuration for tickless mode.
* NFC: support for tickless mode.
* API Timebase: improve tick error handling in IRQ. Apploader: use insomnia mode to run applications.
* BLE: prevent sleep while core2 starting
* HAL: nap while in insomnia mode
* init records work
* try to implement record delete
* tests and flapp
* flapp subsystem
* new core functions to get app stat, simplify core code
* fix thread termination
* add strdup to core
* fix tests
* Refactoring: remove all unusued parts, update API usage, aggreagate API sources and headers, new record storage
* Refactoring: update furi record api usage, cleanup code
* Fix broken merge for freertos apps
* Core, Target: fix compilation warnings
* Drop firmware target local
* HAL Timebase, Power, Clock: semaphore guarded access to clock and power modes, better sleep mode.
* SD-Filesystem: wait for all deps to arrive before adding widget. Core, BLE: disable debug dump to serial.
* delete old app example-ipc
* delete old app fatfs list
* fix strobe app, add input header
* delete old display driver
* comment old app qr-code
* fix sd-card test, add forced widget update
* remove unused new core test
* increase heap to 128k
* comment and assert old core tests
* fix syntax
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* GUI: abolish API injection into instances. Update usage by 3rd party apps.
* GUI: update documentation. Cleanup api usage. Adjust status bar item spacing.
* Core, API: add externs for c++
* Makefile: improve debug speed, flash with openocd, cleanup f2 config
* Power: add cli diagnostic.
* Local: fix api hal externs
* Local: fix externs in main and flipper_hal
* F2: power state dump stabs
* Bootloader flashing with openocd
* F3: move bq drivers to libs
* temporary do not build drivers on local
* temporary do not build drivers on f2
Co-authored-by: aanper <mail@s3f.ru>
* fix multithread logic
* more buffer for dallas id string
* update apps to use new logic
* delay_us small speedup
* add consant qualifier to gpio records and some core api
* fix some apps to use simpler method of getting gpio record
* fix ibutton app, stupid stack problem
