gornekich
5769595e67
NFC emulation software tunning ( #1341 )
...
* digital_signal: optimize calculationxx
* firmware: add listen start and listen rx
* digital signal: rework with fixed point calculation
* nfc: tune timings
* nfc: fix array overflow
* mifare classic: fix key access
* nfc: rework spi bus access
* nfc: rework listen mode with st25r3916 calls
* digital signal: speed up digital_signal_append()
* digital signal: remove unused profiling
* nfc: clean up code
* nfc: correct sleep state
* nfc: add unit tests
* nfc: fix memory leak in unit test
* digital_signal: remove unused code
* nfc: fix incorrect sak load in pt memory
Co-authored-by: あく <alleteam@gmail.com>
2022-07-03 23:51:50 +09:00
Yukai Li
556af0b82b
nfc: NTAG21x complete emulation ( #1313 )
...
* nfc: Refactor Mifare Ultralight feature flags
Unify them in both reader and emulator to make handling easier
* nfc: Refactor MFUL PWD_AUTH and add AUTHLIM counter
* nfc: Add MFUL EV1 VCSL command emulation
* nfc: Enforce message size check in MFUL emulation
Also fix READ_CNT byte order, but it's not fully working
* nfc: Add MFUL auth counter serialization
Also fill counter on successful read from tag
* nfc: Fix MFUL INCR_CNT emulation
* nfc: Fix MFUL READ_CNT emulation
* nfc: Refactor MFUL emulation and implement full write support
* nfc: Fix Mifare Ultralight serialization
* nfc: Add MFUL OTP/CC handling
* nfc: Make sure MF0UL21 dynamic lock byte 3 also reads 0xBD
* nfc: Small MFUL refactor and fix CFGLCK behavior
* WIP: nfc: MFUL read support with ASCII mirror and auth roll-over
This is too complex and I don't like it
* nfc: Simplify MFUL read emulation, fix mirror range check
* nfc: Implement MFUL auth and ASCII mirror for FAST_READ
* nfc: Fix MFUL read roll-over with AUTH0 set
* nfc: Implement MFUL read counter increment
* nfc: Align ASCII mirror to NTAG21x behavior
* nfc: Handle invalid command in MFUL emulation
* nfc: Fix MFUL static lock check
* nfc: Refactor MFUL emulation to use cached config pages
* nfc: Refactor MFUL auth counter to count up instead of down
* nfc: Add missing NULL check
* WIP: nfc: Various MFUL emulation behavior tweaks
* WIP: nfc: More MFUL emulation behavior adjustments
* nfc: Match AUTHLIM emulation to NTAG21x behavior
* nfc: Fix MFUL dynamic lock emulation
* nfc: Fix typo in MFUL read counters
* nfc: Fix typo in MFUL FAST_READ emulation
* nfc: Increase emulation TX buffer size
Enough space for if someone requests FAST_READ of all pages of an NTAG
* nfc: Fix MFUL negative verification counter overflow
* nfc: Change auth counter kv name
* nfc: Fix NTAG I2C FAST_READ emulation
* nfc: Fix NTAG21x config reload behavior
Co-authored-by: あく <alleteam@gmail.com>
2022-06-22 00:04:35 +09:00
あく
839e52ac32
[FL-2591] Furi: remove CMSIS thread api, migrate to FuriThread, remove unused CMSIS APIs ( #1333 )
...
* Furi: remove CMSIS thread api, migrate to FuriThread, remove unused CMSIS APIs
* Furi: magic thread catcher validating thread completion; backtrace improver
* Furi: allow furi_thread_get_current_id outside of thread context
* Furi: use IRQ instead of ISR for core primitives
2022-06-20 18:54:48 +04:00
あく
b2132b2ec7
Nfc: async pcap worker ( #1315 )
...
* Nfc: async pcap worker
* nfc: add pcap save to classic emulation
Co-authored-by: gornekich <n.gorbadey@gmail.com>
2022-06-14 11:14:13 +10:00
Kevin Wallace
9c9f66a30f
nfc: add debug PCAP output, refactor Mifare DESFire following #1095 ( #1294 )
...
* nfc: refactor nfc_worker_read_mifare_desfire to use furi_hal_nfc_tx_rx
Renames furi_hal_nfc_exchange_full to furi_hal_nfc_tx_rx_full, and
rewrites it to use furi_hal_nfc_tx_rx. This eliminates the final
remaining use of furi_hal_nfc_exchange, so remove that.
* nfc: write debug.pcap when debug mode enabled
Limited to NFC protocols that use furi_hal_nfc_tx_rx to communicate.
* switch to Doxygen style comment
Co-authored-by: Kevin Wallace <git+flipperzero@kevin.wallace.seattle.wa.us>
Co-authored-by: あく <alleteam@gmail.com>
2022-06-09 17:35:34 +09:00
Gary
533f12af15
Change "FuriHalNfc Current state" trace to only log on change of state #1272
...
Co-authored-by: gornekich <n.gorbadey@gmail.com>
2022-05-26 16:00:59 +03:00
Yukai Li
0d5d4c8688
RFC: NTAG I2C support ( #1227 )
...
* nfc: Add NTAG I2C (Plus) 1K/2K read support
* nfc: Add rudimentary NTAG I2C emulation
* nfc: Closer NTAG I2C emulation plus debug logging
* nfc: Fix NTAG I2C sector select emulation
* nfc: Add security for NTAG I2C
* nfc: Send NAK correctly for MFUL reads
* nfc: Better emulate NTAG I2C SECTOR_SELECT behavior
* nfc: Fix non-I2C Ultralight read
Per datasheet, max sector for SECTOR_SELECT is 0xfe, so 0xff is OK
as uninit value
* nfc: Only read sig for NTAG if supported
Attempting to read signature breaks immediate call to sector select on
NTAG I2C original for some reason, so don't read signature if the
command is not supported
Co-authored-by: gornekich <n.gorbadey@gmail.com>
2022-05-26 15:55:29 +03:00
gornekich
d31578508a
[FL-2245] Introduce Mifare Classic Emulation ( #1242 )
...
* digital signal: introduce digital signal
* nfca: add nfca signal encoder
* nfc: add mifare classic emulation scene
* nfca: add classic emulation support to lib and hal
* mifare classic: support basic read commands
* nfc: add mifare classic menu scene
* mifare classic: start parsing commands in emulation
* mifare classic: add nested auth
* nfc: fix errors
* mifare classic: add encrypt function
* nfc: fix mifare classic save
* lib hex: add hex uint64_t ASCII parser
* flipper format: add uint64 hex format support
* nfc: add mifare classic key map
* nfc: hide mifare classic keys on emulation
* mifare classic: add NACK responce
* nfc: add partial bytes support in transparent mode
* nfc: mifare classic add shadow file support
* digital signal: move arr buffer from BSS to heap
* mifare classic: process access bits more careful
* nfca: fix memory leack
* nfc: format sources
* mifare classic: cleun up
Co-authored-by: あく <alleteam@gmail.com>
2022-05-24 17:00:15 +03:00
hedger
4d6b170769
[FL-2520] FW build with -Wextra ( #1185 )
...
* Fixing compiler warnings with -Wextra
* More warnings suppression, WIP
* Even more warning fixes
* Added new lines at end of text files.
* Padding fix
* Additional fixes to warnings on different build configurations; added -Wextra to default build pipeline
* Fixes for Secplus v1
* -additional warnings
* +-Wredundant-decls fixes
* FuriHal: print stack overflow task name in console
* FuriHal: add missing include
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2022-05-06 16:37:10 +03:00
gornekich
7c692a9f36
[FL-2432], [FL-2487] Rework bt keys load and save ( #1139 )
...
* bt keys: rework load and save with saved_struct
* bt: rename bt keys storage functions
* furi_hal_nfc: allow context switch during emilation
* bt settings: rework with saved struct
* infrared: replace file worker with dialogs and storage
* Core, Loader: fix thread allocation tracking, much better, so wow.
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2022-04-21 18:36:53 +03:00
gornekich
cea118cf2d
[FL-2470, FL-2385, FL-2411] NFC fixes ( #1138 )
...
* mifare classic: increase data exchange timeout
* nfc: exit from app if can't parse file
* furi_hal_nfc: allow to switch context during detect
Co-authored-by: あく <alleteam@gmail.com>
2022-04-20 17:08:36 +03:00
gornekich
956788c09b
[FL-2369] NFC refactoring ( #1095 )
...
* nfc: clean up scenes
* nfc worker: remove field on from worker
* nfc worker: move full data exchange to furi hal
* nfc_device: check UID length
* nfc protocol: introduce mifare common API
* nfc: move common data to furi hal nfc
* nfc: rename emv_decoder -> emv
* nfc: move emv data structure to emv lib
* nfc: remove deactivate after detection
* nfc: rework furi hal nfc detect
* nfc: clean up CLI commands and type
* nfc: remove unused includes and function
* nfc: add TxRxType enum
* nfc: read mifare ultralight refactoring
* nfc: refactore mifare ultralight start
* rfal: fix custom data exchange
* nfc: refactor read bank card
* nfc: refactor read emv application
* nfc: refactor emv test emulation
* nfc: refactor uid emulation
* nfc: add limit to uid emulation logger
* fix source formatting
* furi_hal_nfc: fix data exchange full
* nfc: fix mifare ultralight type load
Co-authored-by: あく <alleteam@gmail.com>
2022-04-19 18:23:58 +03:00
gornekich
eafeefb843
[FL-1396] Mifare Classic read ( #1034 )
...
* rfal: add new data exchange function
* core: add FURI_BIT to common defines
* furi_hal_nfc: add data exchange with custom patiry bits
* lib: extend nfc common API
* assets: add mf classic dictionary
* lib: introduce mifare classic library
* nfc: add dictionary reader helper
* nfc worker: add worker events, add mifare classic read
* nfc: rework scenes with worker events
* nfc: add read mifare classic GUI
* nfc device: add mifare classic save
* nfc: add dictionary open fail scene
* nfc: mention resources
* stream: fix stream read line
* subghz: rework file read with fixed stream_read_line
* furi_hal_nfc: decrease communication timeout
* nfc: rework keys load from dictionary with file_stream
* nfc: add read mifare classic suggestion
* nfc: fix mifare classic read view
* nfc: fix index size
* nfc: add switch to no dictionary found scene
* nfc: add mifare classic load
* nfc: improve read mifare classic design
* mifare_classic: add proxmark3 mention
* nfc: format sources
* nfc: fix typos, add documentation
2022-03-24 01:14:34 +03:00
gornekich
8cfd0eab9e
[FL-2198], [FL-2161] NFC emulation refactoring ( #968 )
...
* rfal: add state changed callback
* furi_hal_nfc: add NFC-A emulation API
* nfc: add emulation logger, refactor scenes
* elements: fix text_box element
* gui: fix text box module
* nfc: remove unnecessary buffers
* nfc: introduce emulation callback concept
* nfc: format sources
* bt settings: fix incorrect scene switch
* bt settings: format sources
* Debug: fix x2d import for python 3
* Gui: rename method name widget_clear to widget_reset
* nfc: add nfca emulation handler
* nfc: add global custom events enum
* nfc: UID emulation Data -> Log
* furi_hal_nfc: fix incorrect timings
* u2f, badusb: widget_clear() -> widget_reset()
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2022-02-02 22:59:28 +03:00
あく
389ff92cc1
Naming and coding style convention, new linter tool. ( #945 )
...
* Makefile, Scripts: new linter
* About: remove ID from IC
* Firmware: remove double define for DIVC/DIVR
* Scripts: check folder names too. Docker: replace syntax check with make lint.
* Reformat Sources and Migrate to new file naming convention
* Docker: symlink clang-format-12 to clang-format
* Add coding style guide
2022-01-05 19:10:18 +03:00
