Nikolay Minaylov
2f3ea9494e
HAL to LL migration: GPIO, HSEM, AES ( #1069 )
...
* gpio, hsem, crypto: switch from HAL to LL/registers
* Moved GPIO initialization to furi_hal
* More HAL removed
* All HAL modules disabled
* HAL is finally removed
* hal_gpio -> furi_hal_gpio, main.h removed
* Bootloader build fix
* RTOS config moved to freertos-glue
* delay -> furi_hal_delay
Co-authored-by: あく <alleteam@gmail.com>
2022-03-30 18:23:40 +03:00
あく
939998a8c8
Release Candidate 0.48.0 Bug Fixes ( #991 )
...
* Power: wait a little bit till message displayed on screen when executing power off. FuriCore: do not use bkpt in release builds(causing HardFault when SPI is active).
* Cleanup BSS section: add more consty consts to be more constish.
* Desktop: properly handle autostarted applications.
2022-02-13 22:24:03 +03:00
あく
df2d1ad13f
[FL-2219, FL-2251] System, FuriCore, FuriHal: various bug fixes and improvements ( #986 )
...
* Replace irq shenanigans with critical section
* Power: halt system on power off instead of crash.
* Gui: properly handle input event on NULL current_view
* FuriHal: correct gpio configuration sequence
* FuriHal: cleanup uart initialization. Makefile: allow to disable thread support.
* Loader: improve locking, fix simultaneous app start crash, full command line args support for gui apps, more consistent insomnia
* Loader: correct spelling
* FuriHal: increase gpio configuration readability
* FuriHal: correct gpio configuration error when mode is GpioModeEventRiseFall
Co-authored-by: DrZlo13 <who.just.the.doctor@gmail.com>
2022-02-10 14:20:50 +03:00
あく
389ff92cc1
Naming and coding style convention, new linter tool. ( #945 )
...
* Makefile, Scripts: new linter
* About: remove ID from IC
* Firmware: remove double define for DIVC/DIVR
* Scripts: check folder names too. Docker: replace syntax check with make lint.
* Reformat Sources and Migrate to new file naming convention
* Docker: symlink clang-format-12 to clang-format
* Add coding style guide
2022-01-05 19:10:18 +03:00
gornekich
420c03bb58
[FL-1720] BLE GUI refactoring ( #678 )
...
* dialog_ex: add clean method, fix documentation
* application: add bt debug and settings application
* bt: add debug application
* bt: add settings application
* bt: rework bt service
* bt debug: fix carrier debug app
* assets: add debug animation to main menu
* bt debug: fix bt packet test
* bt service: rework bt service
* bt: cleanup
* Assets: fix spelling
* Ble: wait for core 2 startup complete before initializing radio stack.
* Accessor: remove dead code, switch port PA6 to PA4, because interrupt line 6 is used by down button.
* FuriHal: assert interrupt line on add_int_callback.
* Bt: update icon on core2 startup complete.
Co-authored-by: あく <alleteam@gmail.com>
2021-09-02 02:22:40 +03:00
あく
0a97d6913c
Rename api-hal to furi-hal ( #629 )
2021-08-08 21:03:25 +03:00
SG
eac8626c8c
[FL-1351] Wiegand read fix ( #483 )
...
* App accessor: fix external interrupts binding. Hal: removed InterruptTypeExternalInterrupt.
* GPIO hal: add ex and simple init functions to F6 target
* GPIO hal: add dummy alt fn to F6 target
* RFID hal: update gpio hal usage
* F5,F6: synchronize targets, backport VCP fixes, cleanup.
Co-authored-by: あく <alleteam@gmail.com>
2021-05-24 12:57:14 +03:00
SG
46bc515c6a
Low frequency RFID app [Read stage] ( #385 )
...
* App Lfrfid: init
* HAL-resources: add external gpios
* HAL-pwm: fix frequency calculation
* App LFRFID: generic manchester decoder
* App LFRFID: em-marine decoder
* App iButton: fix dwt timing acquire
* App LFRFID: rfid reader
* App LFRFID: temporary read keys on read scene
* App LFRFID: remove atomic bool init.
* App LFRFID: add *.c to build
* App LFRFID: unstable HID decoder
* App LFRFID: HID-26 reading
* HAL OS: disable sleep
* App LFRFID: HID-26 reader: remove debug
* App LFRFID: static data decoder-analyzer
* App LFRFID: very raw Indala decoder
* App LFRFID: multiprotocol reader
* App LFRFID: more reliable HID decoder
* App LFRFID: syntax fix
* App LFRFID: simple read scene
* Gui: force redraw on screen stream connect
* HAL-OS: allow sleep
* App LFRFID: notify api, tune view, tune scene
* App LFRFID: simple rfid emulator
* App LFRFID: more scenes, more reliable EM decoder.
* App LFRFID: format fix
* App LFRFID: warning fix
* Api-hal-resources: add rfid pins, rename external pins
* App LFRFID: remove unused emulator
* App LFRFID: use new gpio hal api
* App accessor: use new ext gpio name
* App LFRFID: remove unused emulator
* App LFRFID: remove debug gpio
* Api-hal-resources: alternate functions init
* Api-hal-rfid: new api
* Api-hal-ibutton: new api
* Api-hal: new headers
* App LFRFID: use new api in reader subroutines
* App LFRFID: use new api in emulator subroutines
* App LFRFID: remove old app
* App LFRFID, App iButton: fix memleak
* Api-hal-rfid: comments
* App LFRFID: pulse joiner helper, it combines pulses of different polarity into one pulse suitable for a timer
* App LFRFID: pulse joiner, now can accept only ne pulse
* App LFRFID: pulse joiner, fixes
* App LFRFID: EM encoder and emulation
* App LFRFID: format fixes
* App LFRFID: emmarine encoder cleanup
* App LFRFID: HID Encoder blank
* App LFRFID: Indala Encoder blank
2021-05-04 16:21:16 +03:00
gornekich
b405a22cd1
[FL-1167] Rework GPIO and EXTI with LL lib ( #424 )
...
* api-hal-gpio: rework gpio on ll
* one_wire_slave: rework gpio initialization
* interrupts: add attribute weak to hal exti interrupts handlers
* api-hal-gpio: add exti interrupt handlers
* input: rework with api-hal-gpio interrupts
* one_wire_slave: rework with api-hal-gpio interrupts
* api-hal-gpio: fix incorrect exti line config
* api-hal-gpio: add doxygen documentation
* api-hal-gpio: add enable / disable interrupts
* api-hal-gpio: add get_rfid_level
* core: remove api-gpio
* applications: rework gpio with api-hal-gpio
* lib: rework gpio with api-hal-gpio
* rfal: disable exti interrupt when rfal is inactive
* rfal: add interrupt gpio reinitialization
* api-hal-gpio: hide setting speed and pull mode LL implementation
* stm32wbxx_it: remove unused EXTI handlers
* api-hal-gpio: guard set, enable, disable and remove interrupt
* Drop F4 target
* Accessor: update gpio api usage
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2021-04-29 11:51:48 +03:00
SG
c3350990c2
App accessor: init ( #433 )
2021-04-28 15:13:25 +03:00
