* Add the info screen
* Oops, don't dupe the points!
* Show ATQA and SAK, remove the back label
* And the dolphin doesn't need to be imported anymore
* Correct UX to the approved one
Co-authored-by: gornekich <n.gorbadey@gmail.com>
* Fix unexpected behaviour when opening remote from outside
* Same fix for editing button name
* Exit application correctly if remote was deleted
* Remove duplicate function from ibutton
* Use COUNT_OF macro
Co-authored-by: あく <alleteam@gmail.com>
* Do not use infrared worker callback for notifications
* Remove tx callback
* Port Infrared notifications to hardware blinker
* Move all blink message definitions to notification_messages.h
* Fix potential hangup after leaving debug scene
* Added option to edit UID in saved NFC files
* Fixed bug with saved filename
* Only show for data that can't be read
Co-authored-by: あく <alleteam@gmail.com>
* FIX: Fixed inconsistencies between texts: I have changed inconsistencies. Sometimes there was a missing capital letter and sometimes there was dot instead of exclamation mark and so on. No other changes were made. I have made the correction based on how other text looks on Fliper and for headers most texts use Pascal Case.
* FIX: Fixed inconsistencies between texts: Found 2 more texts with inconsistencies.
Co-authored-by: あく <alleteam@gmail.com>
* Fix incorrect buffered stream behaviour
* Add specific tests
* Make the test fail on wrong behaviour
* Better names
Co-authored-by: あく <alleteam@gmail.com>
* Updater: retrying pre-boot SD card mount multiple times
* Updater: added delay before retrying SD card mount on early boot
Co-authored-by: あく <alleteam@gmail.com>
* nfc: change read scene views
* nfc: rework return after save success
* nfc: add fallback to read UID of unrecognized iso14443-3
* nfc: show mifare desfire on read success
* nfc: add restore original confirm scene
* nfc: fix icon name
* nfc: clear 6 bit in SAK to emulate 14443-4 uids
* nfc: don't change original sak
* [FL-2684] SubGhz: fix incorrect CAME TWICE protocol definition
* [FL-2685] SubGhz: fix the recorded RAW signal is deleted when trying to transmit on a prohibited frequency
Co-authored-by: あく <alleteam@gmail.com>
* desktop: restored automatic power off & manual power off on slideshow view; assets: added frames for new first start sequence; docs: added info on slideshow compilation
* desktop: restarting long timer on OK button release
Co-authored-by: あく <alleteam@gmail.com>
* storage: added global #defines for /int, /ext & /any
* storage: introduced PATH_EXT, PATH_INT& PATH_ANY macros
* core apps: moved hardcoded config files names to separate headers; prefixed them with "."; updater: added file name migration to new naming convention on backup extraction
* storage: fixed storage_merge_recursive handling of complex directory structures; storage_move_to_sd: changed data migration logic to all non-dot files & all folders
* core: added macro aliases for core record names
* Bumped protobuf commit pointer
* storage: reserved 5 pages in /int; denying write&creation of non-dot files when running out of free space
Co-authored-by: あく <alleteam@gmail.com>
* Added condition to cli "log" command. If USB is disconnected while "log" command is running, it will end the command.
* Reverted change on cli_commands.c
Added condition in cli.c for cli_cmd_interrupt_received function to react appropriately when serial terminal is disconnected.
Added condition in subghz_cli.c for subghz chat cmd to exit gracefully when serial terminal is disconnected.
* Formatting
Co-authored-by: あく <alleteam@gmail.com>
* Move samsung raw data to assets
* Add more assets and fix bugs
* Clean up code
* Implement all raw data as assets
* Remove input data from old test files
* Better signal names
* Better file opening logic
* Implement loading parsed data from files
* Move most of RC5 tests into assets
* Add more test cases
* Add more test cases
* Eliminate RUN_DECODER macro
* Better code structure
* Implement run_encoder function
* More encoder tests
* Move all encoder tests to assets
* Move all test data to assets
* Normalise function names
* Rename code files
* Uncomment other tests
* Swich test order to avoid weird memory leaks
* UnitTests: cleanup output and redirect it into stdout
* UnitTests: selectable tests and better reporting
Co-authored-by: あく <alleteam@gmail.com>
* Update the HID Keycodes to pull from the library
* Composite BLE Report Map, add consumer & mouse HID
* Add Mouse & keyboard bt remote, fixed media remote
* BT Keyboard remove long press shift
* Fix usb hid modifier keys
* Fixed misaligned bad usb keys
* Fix keyboard app keys
* Partial fix for bt app and linux
* Update to work across platforms
* Fix for report ids
* BtHidApp: move variable from bss to model, cleanup naming.
* FuriHal: add const to immutable data declaration
Co-authored-by: あく <alleteam@gmail.com>
* Move structs to header
* roll mbedtls into loclass
* Picopass with scene for reading card
* Picopass: fix memory leak
* Lib: return mbedtls back
* Picopass: rename symbols to match naming guide
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* [FL-2610] SubGhz: add keypad lock SubGhz -> Read
* SubGhz: fix multiple clicks on the back button
* SubGhz: turn on the backlight when receiving with the keypad locked. key processing delay when exiting Locked mode
* SubGhz: chanage lock variable and enums names
* SubGhz: replace direct return with consumed
Co-authored-by: あく <alleteam@gmail.com>
* add mdedtls for des3 implementation
* add localss from RfidResearchGroup/proxmark3
* picopass reader app and rfal for communicating with picopass cards
* always turn off field
* close storage when keys are not found
* Add mbedtls as submodule
* add mbedtl_config
* Switched to only including specific mbedtls files I need. Thank you @kevinwallace
* cherry-pick kevinwallace sconsify
* scons for mbedtls/loclass
* Reset to ready state on error
* unsigned FC/CN
* clean FC/CN if not decoded
Co-authored-by: hedger <hedger@users.noreply.github.com>
Co-authored-by: あく <alleteam@gmail.com>
Co-authored-by: Kevin Wallace <git+flipperzero@kevin.wallace.seattle.wa.us>
* fbt: building `core` with respect for debug flag
* fbt: added size output for firmware elf
* Infrared: fix cli
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* nfc: don't give up on reading DESFire card if GET_KEY_SETTINGS fails
Some cards are configured to refuse to provide key settings, but still
provide other info. For example, Ubiquiti UniFi Protect access cards
won't list keys or applications, but will still answer GET_FREE_MEMORY.
* nfc: don't show error when saving DESFire card with no applications
* nfc: fix DESFire load with 0 applications or no PICC key settings
Co-authored-by: Kevin Wallace <git+flipperzero@kevin.wallace.seattle.wa.us>
Co-authored-by: gornekich <n.gorbadey@gmail.com>
Co-authored-by: あく <alleteam@gmail.com>
* Add skeleton for infrared C port, rename old app
* Add scene stubs
* Add more views
* Misc changes
* Add remote and signal class stubs
* Complete infrared signal class
* Add remote button class stub
* Check if button contains a signal during destruction
* Complete infrared signal class more
* Implement remote storing
* Implement remote loading
* Fix error handling
* Implement remote transmitting
* Rename scene
* Canonise event consumption
* Implement remote learning (stub)
* Implement learn success screen (stub)
* Implement AskBack scene
* Improve remote saving&loading
* Fix remote file name
* Add LearnDone scene
* Switch from Remote scene correctly
* Add SceneButtonSelect
* Remove unneeded assert
* Add new SceneManager method
* Use new SceneManager method in Infrared
* Implement renaming of buttons and remotes
* Implement deleting of buttons and remotes
* Add universal remotes list
* Add brute force code
* Brute force code improvements
* Partially implement Universal Remote GUI
* Fix wrong singnal handling
* Fully implement Universal Remote
* Use standard custom events everywhere
* Return infrared CLI
* Remove old Infrared app
* Change container name
* Fix scene order
* Put ButtonPanel into stack only when needed
* Show loading animation during slow operations
* Do not hardcode Loading widget coordinates
* Switch Loading widget orientation as needed
* Save Start scene state
* Save Remote scene state
* Save Edit scene state
* Save EditButtonSelect scene state
* Do not use scene state
* Use string_t instead of const char* for brevity
* Fix memory leak
* Fix saving raw remotes
* Add Infrared debug menu
* Add debug view
* Move Infrared monitor into Infrared application
* Remove old Infrared monitor app
* Use common signal received callback everywhere
* desktop: prompt to power off on back button long press
Implemented by launching Power Settings app, passing "off" as arg to
directly jump to "power off" scene.
* Add more options
* Change from one big command to three small commands
These changes follow from the review. Instead of having to
rely in GOTOs (which are forbidden :<( ) to ensure cleaning,
I divided in smaller pieces. Since I had no feedback w.r.t
the previously existing `gpio_set`, this fits more with the
current implementation.
I also tried to interpret "That's not how we do enums" as
to not include a `enum EnumName` decl. when using typedefs.
I also distanced the implementation from using LL_GPIO
in favour of functions provided in `<furi_hal_gpio.h>`
but there was nothing to get the mode, so I stuck with
LL_GPIO for mode check.
Co-authored-by: あく <alleteam@gmail.com>
* nfc: refactor nfc_worker_read_mifare_desfire to use furi_hal_nfc_tx_rx
Renames furi_hal_nfc_exchange_full to furi_hal_nfc_tx_rx_full, and
rewrites it to use furi_hal_nfc_tx_rx. This eliminates the final
remaining use of furi_hal_nfc_exchange, so remove that.
* nfc: write debug.pcap when debug mode enabled
Limited to NFC protocols that use furi_hal_nfc_tx_rx to communicate.
* switch to Doxygen style comment
Co-authored-by: Kevin Wallace <git+flipperzero@kevin.wallace.seattle.wa.us>
Co-authored-by: あく <alleteam@gmail.com>
* SubGhz: add frequency support 310 MHz
* SubGhz: deleting a TMP file using the "Erase" button in Read RAW
* SubGhz: fix frequency analyzer scan speed
* SubGhz: fix start duration came_atomo protocol
* SubGhz: refactoring subghz_setting
* SubGhz: refactoring load setting frequency analyzer
* SubGhz: fix load setting, default frequency
* SubGhz: patch raw temp file remove code to work with string_t
* Storage: parallel safe cli
* SubGhz: new frequency settings loading system
* Assets: recompile to include latest subghz custom frequency control changes
Co-authored-by: あく <alleteam@gmail.com>
* SubGhz: fix frequency reset on incomplete exit from the transmission menu
* SubGhz: fix incorrect shutdown of CC1101 if it was not turned on
* SubGhz: consciousness and transmission support Security+ 1.0
* Unit_test: add test encoder Security+ 1/0
* SubGhz: fix start counter Security+ 1.0
Co-authored-by: SG <who.just.the.doctor@gmail.com>
Co-authored-by: あく <alleteam@gmail.com>
* File browser module and test app
* nfc: Add support for saved files in subdirectories
* nfc: Use helper function to get shadow path when loading data
* File browser dialog integration pt.1
* File browser dialog integration pt.2
* Gui,Dialogs: drop file select
* Correct use of dynamic string_t(string_ptr)
Co-authored-by: Yukai Li <yukaili.geek@gmail.com>
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* nfc: Add NTAG I2C (Plus) 1K/2K read support
* nfc: Add rudimentary NTAG I2C emulation
* nfc: Closer NTAG I2C emulation plus debug logging
* nfc: Fix NTAG I2C sector select emulation
* nfc: Add security for NTAG I2C
* nfc: Send NAK correctly for MFUL reads
* nfc: Better emulate NTAG I2C SECTOR_SELECT behavior
* nfc: Fix non-I2C Ultralight read
Per datasheet, max sector for SECTOR_SELECT is 0xfe, so 0xff is OK
as uninit value
* nfc: Only read sig for NTAG if supported
Attempting to read signature breaks immediate call to sector select on
NTAG I2C original for some reason, so don't read signature if the
command is not supported
Co-authored-by: gornekich <n.gorbadey@gmail.com>
Only the bottom nybble of buf[1] is the key ID; the top nybble contains flags.
Notably, the top bit is set for AES mode on EV1+ cards, and ORCA cards in the
Seattle area were just upgraded to include an app that uses AES.
Prior to this, cards with flags set could be read and saved just fine, but
loading them would fail due to missing keys. After this, tags saved with the
old version will load fine, and when re-saved will have the flags separated
out into a new field.
Co-authored-by: Kevin Wallace <git+flipperzero@kevin.wallace.seattle.wa.us>
Co-authored-by: gornekich <n.gorbadey@gmail.com>
Co-authored-by: あく <alleteam@gmail.com>
* battery service: add power state charachteristic
* bt: update power state on charging / discharging events
* ble config: support only one connection
* bt: always update flow control characteristic
* bt: fix power state update
* bt: simplify updating power state
* bt: don't update flow control charachteristic
* bt: Fix race condition when disconnect during TX
* bt: Move flag clear to not be in middle of other logic
* bt: Bail out of send bytes a little bit earlier
Co-authored-by: gornekich <n.gorbadey@gmail.com>
Co-authored-by: あく <alleteam@gmail.com>
* SubGhz: MegaCode display changes
* SubGhz: refactoring frequency analyzer
* SubGhz: use one stage detection in frequency analyzer, tune bw, datarate and etc
* SubGhz: tune analyzer threshold
* SubGhz: raise frequency analyzer threshold and rssi sampling config
* SubGhz: fix frequency analyzer, small step frequency analysis
* SubGhz: subghz_frequency_analyzer_worker
* SubGhz: fix SUBGHZ_FREQUENCY_ANALYZER_THRESHOLD
* SubGhz: debug logging in frequency analyzer, increase MAGN_TARGET to max value
* SubGhz: reduce RSSI delay in frequency scanner
* SubGhz: fix delays, remove trace logging from frequency analyzer
* SubGhz: cleanup variable names and add comments
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* Updater: Migrating to new manifest path convention
* RPC: Added update preparation status to RPC
* RPC: bumped protobuf submodule
* Bumped protobuf_version.h
* FuriCore: add missing include. Lib: make mlib smaller
* Explicitly tell where we have doubles and fix random in animations
* makefile: added -DLFS_NO_DEBUG
* Updater: path len constant dedup
* Updater: checking for hardware version match before parsing manifest
* LD: moved _DRIVER_CONTEXT sections to .bss, where they belong.
* LD: avoiding PROBGITS warning, moved _CONTEXT to data
* Updater: Added version check on update package - refusing to install outdated
Co-authored-by: あく <alleteam@gmail.com>
* Initial C iButton app setup
* Add more scenes
* Add even more scenes
* Add even more scenes again
* More scenes...
* Add key info scene
* Add delete success scene
* Use scene state to store internal data
* Add parameter parsing
* Add emulate scene
* Add write scene
* Add write success scene
* Add Read scene
* Add read success scene
* Add exit confirm scene
* Add retry confirm scene
* Add CRC error scene
* Add not key scene
* Add read key menu scene
* Rename some scenes
* Refactor conditionals
* Remove unneeded custom events
* Remove the old iButton app
* Correct formatting
* Remove rogue comments and function prototypes
* iButton: cleanup merge artifacts and fix warnings
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* Updater: UI rework initial
* Updater: further updates to UI, added a temporary parrot
* Updater: additional checks on radio stack type before update
* Second iteration of updater UI: additional handling of resource unpacking errors
* updater: removed extra logging, renamed some stages
* Updater: Changed "back" button icon on error screen
* Archive: signed/unsigned fix
* Updater: cancelling update also cancels LFS+resources processing; restored /ext/update/ folder magic to 0
* Updater: root dir fix
Co-authored-by: nminaylov <nm29719@gmail.com>
* Fixing compiler warnings with -Wextra
* More warnings suppression, WIP
* Even more warning fixes
* Added new lines at end of text files.
* Padding fix
* Additional fixes to warnings on different build configurations; added -Wextra to default build pipeline
* Fixes for Secplus v1
* -additional warnings
* +-Wredundant-decls fixes
* FuriHal: print stack overflow task name in console
* FuriHal: add missing include
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* Music player: cli tool and new worker
* Music player cli: flush message
* Music player: fix note calculation
* MusicPlayer: fix # parsing and add magic
* FuriHal: improve speaker volume handling. MusicPlayer: minor sustain improvements
* MusicPlayer: fix buffer overseek
* FuriHal: drop unused variables
* MusicPlayer: LFO 4 magic
* MusicPlayer: add RTTTL parser
* MusicPlayer: refactoring and add file open dialog on start
* MusicPlayer: fix memcpy issue and more
* FuriHal: force disconnect USB on early init and then leave usb line alone for some time.
* FuriHal: switch speaker to old volume. MusicPlayer: fix incorrect note history, and drop lfo from worker.
Co-authored-by: DrZlo13 <who.just.the.doctor@gmail.com>
* [FL-2515] Keep backlight on for updater ops
* Notification: Renamed backlight sequences to more obvious names
Co-authored-by: あく <alleteam@gmail.com>
* Disable USART in sleep
* Restore UART state on suspend/resume
* FuriHal: Enable stop mode and add insomnia to I2C and SPI
* Remove IDLE interrupt
* FuriHal: add FPU isr and disable all FPU interrupt, add core2 stop mode configuration on deep sleep
* FuriHal: tie stop mode debug with debug rtc flag
* FuriHal: adjust flash latency on clock switch, tie mcu debug with RTC debug flag
* FuriHal: move resource init to early stage
* Add EXTI pending check, enable debug traps with compile-time flag
* Wrap sleep debug functions in conditional compilation
* Remove erroneous changed
* Do not use CSS, remove it from everywhere
* Enable/disable USB on VBUS connect (prototype)
* FuriHal: add LPMS and DEEPSLEEP magic, workaround state inconsistency between cores
* FuriHal: honor c1 LMPS
* USB mode switch fix
* Applications: add flags and insomnia bypass system
* Correct spelling
* FuriHal: cleanup insomnia usage, reset sleep flags on wakeup, add shutdown api
* FuriHal: extra check on reinit request
* FuriHal: rename gpio_display_rst pin to gpio_display_rst_n
* FuriHal: add debug HAL
* FuriHal: add some magic to core2 reload procedure, fix issue with crash on ble keyboard exit
* FuriHal: cleanup ble glue, add BLE_GLUE_DEBUG flag
* FuriHal: ble reinit API, move os timer to LPTIM1 for deep sleep capability, shutdown that works
* FuriHal: take insomnia while shutdown
* Remove USB switch on/off on VBUS change
* Better tick skew handling
* Improve tick consistency under load
* Add USB_HP dummy IRQ handler
* Move interrupt check closer to sleep
* Clean up includes
* Re-enable Insomnia globally
* FuriHal: enable CSS
* FuriHal: remove questionable core2 clock shenanigans
* FuriHal: use core1 RCC registers in idle timer config
* FuriHal: return back CSS handlers, add lptim isr dispatching
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
Co-authored-by: nminaylov <nm29719@gmail.com>
* CLI: session refactoring
* Added forgotten define
* Desktop lock state save
* Dolphin: use proper type for value returned by dolphin_state_xp_to_levelup
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* C2OTA: wip
* Update Cube to 1.13.3
* Fixed prio
* Functional Core2 updater
* Removed hardware CRC usage; code cleanup & linter fixes
* Moved hardcoded stack params to copro.mk
* Fixing CI bundling of core2 fw
* Removed last traces of hardcoded radio stack
* OB processing draft
* Python scripts cleanup
* Support for comments in ob data
* Sacrificed SD card icon in favor of faster update. Waiting for Storage fix
* Additional handling for OB mismatched values
* Description for new furi_hal apis; spelling fixes
* Rework of OB write, WIP
* Properly restarting OB verification loop
* Split update_task_workers.c
* Checking OBs after enabling post-update mode
* Moved OB verification before flashing
* Removed ob.data for custom stacks
* Fixed progress calculation for OB
* Removed unnecessary OB mask cast
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* NFC: fix memory corruption in nfc_worker_read_mifare_desfire
* NFC: if the NFC tag doesn't have apps or files, don't try to save them.
* NFC: make-format
Co-authored-by: Jack Doan <jackdoan@rivian.com>
Co-authored-by: Skorpionm <85568270+Skorpionm@users.noreply.github.com>
Co-authored-by: Nikolay Minaylov <nm29719@gmail.com>
Co-authored-by: あく <alleteam@gmail.com>
* SubGhz: fix the RAW file is not restored when it is launched from under the folder
* SubGhz: fix does not fit long RAW file name
* SubGhz: fix Read not cleared after file rename
* SubGhz: fix restore default frequency and modulation on output
* SubGhz: fix long name output in RAW
* Renamed assets->resources; enforcing Manifest build if it does not exist
* Rebuild resources from CI
* Added Manifest to repo - be sure to rebuild it with `make -C assets` before committing changes!
* Actually added Manifest.
* Keeping Manifest on assets clean
* Spelling fix in Makefile
* Assets: recompile
* Makefile: add debug_other to main makefile
* Github: stop compilation if compiled assets not in sync with assets sources
* Assets: recompile
* Makefile: correct debug_other rule. Bt: prevent on system start hook from waiting for bt service
* Power, FuriHal: gauge self check report
* Loader: move on system start hook call to the beginning
* Notification: use all input for backlight, otherwise it is causing issues on repeat. Dolphin: rework debug tools.
* Notification: remove unused variable
* Applications: fix incorrect count in system apps list
* SubGhz: fix memory leak in settings
* SubGhz: fix incorrect frequency in newly created keys
* Loader: make cli command parallel safe
* Add Auto Lock Time setting
* Update .gitignore
* Add value_index toolbox module
* Auto locking basic implementation
* Better AutoLock implementation, edge cases and cleanup
* Fix NULL pointer crash
* Turn off backlight shortly in locked mode
* Re-enable auto lock after pin lock
* Correctly handle start when pin locked
* Use timer to hide locked hint
* Use a single state variable instead of multiple bools
* Do not call update callback recursively
* Allow input when the Unlocked hint is shown
* Add a delay to backlight switch off while locking
* Better user input handling
* Switch backlight off after pin timeout
* Correct grammar in notification settings
Co-authored-by: あく <alleteam@gmail.com>
* WIP on stripping fw
* Compact FW build - use RAM_EXEC=1 COMPACT=1 DEBUG=0
* Fixed uninitialized storage struct; small fixes to compact fw
* Flasher srv w/mocked flash ops
* Fixed typos & accomodated FFF changes
* Alternative fw startup branch
* Working load & jmp to RAM fw
* +manifest processing for stage loader; + crc verification for stage payload
* Fixed questionable code & potential leaks
* Lowered screen update rate; added radio stack update stubs; working dfu write
* Console EP with manifest & stage validation
* Added microtar lib; minor ui fixes for updater
* Removed microtar
* Removed mtar #2
* Added a better version of microtar
* TAR archive api; LFS backup & restore core
* Recursive backup/restore
* LFS worker thread
* Added system apps to loader - not visible in UI; full update process with restarts
* Typo fix
* Dropped BL & f6; tooling for updater WIP
* Minor py fixes
* Minor fixes to make it build after merge
* Ported flash workaround from BL + fixed visuals
* Minor cleanup
* Chmod + loader app search fix
* Python linter fix
* Removed usb stuff & float read support for staged loader == -10% of binary size
* Added backup/restore & update pb requests
* Added stub impl to RPC for backup/restore/update commands
* Reworked TAR to use borrowed Storage api; slightly reduced build size by removing `static string`; hidden update-related RPC behind defines
* Moved backup&restore to storage
* Fixed new message types
* Backup/restore/update RPC impl
* Moved furi_hal_crc to LL; minor fixes
* CRC HAL rework to LL
* Purging STM HAL
* Brought back minimal DFU boot mode (no gui); additional crc state checks
* Added splash screen, BROKEN usb function
* Clock init rework WIP
* Stripped graphics from DFU mode
* Temp fix for unused static fun
* WIP update picker - broken!
* Fixed UI
* Bumping version
* Fixed RTC setup
* Backup to update folder instead of ext root
* Removed unused scenes & more usb remnants from staged loader
* CI updates
* Fixed update bundle name
* Temporary restored USB handler
* Attempt to prevent .text corruption
* Comments on how I spent this Saturday
* Added update file icon
* Documentation updates
* Moved common code to lib folder
* Storage: more unit tests
* Storage: blocking dir open, differentiate file and dir when freed.
* Major refactoring; added input processing to updater to allow retrying on failures (not very useful prob). Added API for extraction of thread return value
* Removed re-init check for manifest
* Changed low-level path manipulation to toolbox/path.h; makefile cleanup; tiny fix in lint.py
* Increased update worker stack size
* Text fixes in backup CLI
* Displaying number of update stages to run; removed timeout in handling errors
* Bumping version
* Added thread cleanup for spawner thread
* Updated build targets to exclude firmware bundle from 'ALL'
* Fixed makefile for update_package; skipping VCP init for update mode (ugly)
* Switched github build from ALL to update_package
* Added +x for dist_update.sh
* Cli: add total heap size to "free" command
* Moved (RAM) suffix to build version instead of git commit no.
* DFU comment
* Some fixes suggested by clang-tidy
* Fixed recursive PREFIX macro
* Makefile: gather all new rules in updater namespace. FuriHal: rename bootloader to boot, isr safe delays
* Github: correct build target name in firmware build
* FuriHal: move target switch to boot
* Makefile: fix firmware flash
* Furi, FuriHal: move kernel start to furi, early init
* Drop bootloader related stuff
* Drop cube. Drop bootloader linker script.
* Renamed update_hl, moved constants to #defines
* Moved update-related boot mode to separate bitfield
* Reworked updater cli to single entry point; fixed crash on tar cleanup
* Added Python replacement for dist shell scripts
* Linter fixes for dist.py +x
* Fixes for environment suffix
* Dropped bash scripts
* Added dirty build flag to version structure & interfaces
* Version string escapes
* Fixed flag logic in dist.py; added support for App instances being imported and not terminating the whole program
* Fixed fw address in ReadMe.md
* Rpc: fix crash on double screen start
* Return back original boot behavior and fix jump to system bootloader
* Cleanup code, add error sequence for RTC
* Update firmware readme
* FuriHal: drop boot, restructure RTC registers usage and add header register check
* Furi goes first
* Toolchain: add ccache support
* Renamed update bundle dir
Co-authored-by: DrZlo13 <who.just.the.doctor@gmail.com>
Co-authored-by: あく <alleteam@gmail.com>
* [FL-2403] Changed (Name and save) buttons name
* [FL-2403] NFC Reading revert LED color to blue
* [FL-2438] Capital_letter_menu_names
* [FL-2438] Capital_letter_menu_names
* [FL-2438] Rename and unify menu items with capitals
* [FL-2438] Capital_letter_menu_and_returned_Empty_folder
* [FL-2438] Capital_letter_menu_and_returned_Empty_folder_label
* [FL-2438] Capital_letter_menu_and_returned_Empty_folder_label_reformating
Co-authored-by: あく <alleteam@gmail.com>
* Power info command, validator fixes
* strdup in validator, fix memory leak
* furi_hal_crypto fixed again
* FuriHal: limit ARR and CC in speaker hal
* FuriHal: LL_TIM_DisableAllOutputs in speaker stop
* Rpc: fix memory leak in screen streaming
* Get rid of crypto_enable/crypto_disable
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* [FL-2431] SubGhz: fix Restart with an error (HardFault), while maintaining the RAW signal.
* Stream: fix adding maximum string length to arguments
* [FL-2419] SubGhz: fix flipper hang/Fatal Error when running edited Sub-GHz file.
* SubGhz: remove replace strcpy with strncpy, smaller text buffer and canary
* SubGhz: log key loading before load happen, rollback only rx message handling
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* Storage: correct replacement for "/any" path in path holder
* Unit tests: storage, blocking file open test
* File stream: error getter
* Storage: common copy and common remove now executes in external thread
* Filesystems: got rid of unused functions
* Storage: untangle dependencies, ram-frendly filesystem api
* iButton: context assertions
* Storage: pubsub messages
* Storage: wait for the file to close if it was open
* Storage: fix folder copying
* Storage: unit test
* Storage: pubsub documentation
* Fix merge error
* Fix memleak in storage test
* Storage: remove unused define
Co-authored-by: あく <alleteam@gmail.com>
* gpio, hsem, crypto: switch from HAL to LL/registers
* Moved GPIO initialization to furi_hal
* More HAL removed
* All HAL modules disabled
* HAL is finally removed
* hal_gpio -> furi_hal_gpio, main.h removed
* Bootloader build fix
* RTOS config moved to freertos-glue
* delay -> furi_hal_delay
Co-authored-by: あく <alleteam@gmail.com>
* FuriHal: refactor interrupts subsystem
* Furi,FuriHal: gather all ISRs under interrupt API, improve crtitical section and cleanup garbage
* FuriHal: mirgate ipcc and hsem to LL
* Format Sources
* FuriHal,BleGlue: move to new critical section
* Format Sources
* FuriHal: correct flash locking
* FuriHal: replace critical section with interrupt disable in OS routine, minor fixex
* iButton HAL: correct init and emulation sequence
* FuriHal: cleanup init/deinit routines for emulation timer
* FuriHal: cleanup TIM initialization routines in RFID and SubGhz
* iButton: delay in emulate loop
* Desktop: fix crash caused by invalid animation manager state, described in FL-2384
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* FuriHal: replace HAL with LL for ARR and CC
* Rfid, FuriHal: migrate emulation to LL
* RFID hal: disable arr preload during emulation
* Rfid, Furi, FuriHal: last piece of LL puzzle
* Rfid, Furi, FuriHal: filing the last piece of LL puzzle
Co-authored-by: DrZlo13 <who.just.the.doctor@gmail.com>
* usb mode switch lock
* lock_mutex removed
* Wait for session termination in rpc_cli, lock badusb and u2f if rpc session is opened
Co-authored-by: あく <alleteam@gmail.com>
* FuriHal: new speaker HAL
* FuriHal: drop PWM
* FuriHal: move COMP1 to LL
* FuriHal: move COMP1 to LL backport to F6
* FuriHal: remove missing gpio_rfid_carrier from F6
* FurHal: use LL for system controls in flash HAL
* Drop F6 source tree
* Drop F6 from GitHub workflow
* Tie USE_FULL_ASSERT with APP_UNIT_TESTS
* Speaker: return to old volume calculation
* FreeRTOS: move TCB header to glue
Co-authored-by: DrZlo13 <who.just.the.doctor@gmail.com>
* Fix TextBox word wrap behavior
* Wrap width is 120 pixels, not 140. (140 is larger than the screen!)
* Glyph width already includes spacing; don't add 1 additional px
* When starting a new line, include wrapped glyph width in new line_width.
* Call canvas_set_font before text_box_insert_endline so that glyph
width is calculated using correct font.
Previous approach worked somewhat well using default TextBoxFontText but
this version is more robust, particularly when using TextBoxFontHex.
* Add basic Mifare DESFire reading, file/app browser
* Fix build with APP_ARCHIVE=0
* Add bool type to flipper_format
* Add ability to save and load DESFire card data
* Skip over NfcSceneDeviceInfo when viewing saved DESFire info
* mf_df_clear: don't leak master key settings key versions
* When opening a DESFire card from Archive, retain UID emulation behavior
* rm unnecessary \r\n
* show Popup instead of leaving view in bad state
* Move NfcReaderRequestData out of union
This makes it safe to emulate DESFire/EMV without clobbering card data.
* Display saved DESFire cards via NfcSceneDeviceInfo
* Display and save file metadata even when contents are missing
This can happen when a file doesn't allow unauthenticated reads (see the
call to mf_df_parse_read_data_response in nfc_worker.c).
Co-authored-by: Kevin Wallace <git+flipperzero@kevin.wallace.seattle.wa.us>
Co-authored-by: あく <alleteam@gmail.com>
Co-authored-by: gornekich <n.gorbadey@gmail.com>
* Initial commit for Debug in CLI
Added Debug as option in CLI
* Update cli_commands.c
Whoops, swapped the printf, now working as expected!
* Fixing Menu Update
Now menu should update
Co-authored-by: SG <who.just.the.doctor@gmail.com>
Co-authored-by: あく <alleteam@gmail.com>
* Removed power 3v3 options
Per skotopes, "3.3V: this line is used to power SD-Card it is highly unrecommended to turn this line off(power will be re-enabled to scan sdcard). We will remove this command in future releases."
So I removed it here. No longer an option and should not be possible.
* Added Debug Flag Detect
When debug is enabled, "power 3v3" can be used and is shown in the help for "power" menu. When debug is disabled, will not show up and cannot be executed!
* Update power_cli.c
Co-authored-by: あく <alleteam@gmail.com>
* Streams: string stream
* String stream: updated insert/delete api
* Streams: generic stream interface and string stream implementation
* Streams: helpers for insert and delete_and_insert
* FFF: now compatible with streams
* MinUnit: introduced tests with arguments
* FFF: stream access violation
* Streams: copy data between streams
* Streams: file stream
* FFF: documentation
* FFStream: documentation
* FFF: alloc as file
* MinUnit: support for nested tests
* Streams: changed delete_and_insert, now it returns success flag. Added ability dump stream inner parameters and data to cout.
* FFF: simplified file open function
* Streams: unit tests
* FFF: tests
* Streams: declare cache_size constant as define, to allow variable modified arrays
* FFF: lib moved to a separate folder
* iButton: new FFF
* RFID: new FFF
* Animations: new FFF
* IR: new FFF
* NFC: new FFF
* Flipper file format: delete lib
* U2F: new FFF
* Subghz: new FFF and streams
* Streams: read line
* Streams: split
* FuriCore: implement memset with extra asserts
* FuriCore: implement extra heap asserts without inventing memset
* Scene manager: protected access to the scene id stack with a size check
* NFC worker: dirty fix for issue where hal_nfc was busy on app start
* Furi: update allocator to erase memory on allocation. Replace furi_alloc with malloc.
* FuriCore: cleanup memmgr code.
* Furi HAL: furi_hal_init is split into critical and non-critical parts. The critical part is currently clock and console.
* Memmgr: added ability to track allocations and deallocations through console.
* FFStream: some speedup
* Streams, FF: minor fixes
* Tests: restore
* File stream: a slightly more thread-safe version of file_stream_delete_and_insert
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* usb service, removed power observer
* fix usb restart after disable
* remove usb service from apps
* Applcations: remove dead extern
* New thread naming scheme for drivers
* New thread symbol naming scheme for drivers
Co-authored-by: あく <alleteam@gmail.com>
* Bugfix: remove freeing of uninitialized object (IrdaAppSignal).
Therefore rubbish in memory sometimes caused HardFault.
* Fix: slow FFF makes IR-remotes loading take much time,
so we can glimpse previous scene's view while remote is parsing.
Reproducing: remove remote, fast press back (while popup is playing)
and select new remote - previous popup view is displayed.
* Power: wait a little bit till message displayed on screen when executing power off. FuriCore: do not use bkpt in release builds(causing HardFault when SPI is active).
* Cleanup BSS section: add more consty consts to be more constish.
* Desktop: properly handle autostarted applications.
