* bt: Fix race condition when disconnect during TX
* bt: Move flag clear to not be in middle of other logic
* bt: Bail out of send bytes a little bit earlier
Co-authored-by: gornekich <n.gorbadey@gmail.com>
Co-authored-by: あく <alleteam@gmail.com>
* SubGhz: MegaCode display changes
* SubGhz: refactoring frequency analyzer
* SubGhz: use one stage detection in frequency analyzer, tune bw, datarate and etc
* SubGhz: tune analyzer threshold
* SubGhz: raise frequency analyzer threshold and rssi sampling config
* SubGhz: fix frequency analyzer, small step frequency analysis
* SubGhz: subghz_frequency_analyzer_worker
* SubGhz: fix SUBGHZ_FREQUENCY_ANALYZER_THRESHOLD
* SubGhz: debug logging in frequency analyzer, increase MAGN_TARGET to max value
* SubGhz: reduce RSSI delay in frequency scanner
* SubGhz: fix delays, remove trace logging from frequency analyzer
* SubGhz: cleanup variable names and add comments
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* Updater: Migrating to new manifest path convention
* RPC: Added update preparation status to RPC
* RPC: bumped protobuf submodule
* Bumped protobuf_version.h
* FuriCore: add missing include. Lib: make mlib smaller
* Explicitly tell where we have doubles and fix random in animations
* makefile: added -DLFS_NO_DEBUG
* Updater: path len constant dedup
* Updater: checking for hardware version match before parsing manifest
* LD: moved _DRIVER_CONTEXT sections to .bss, where they belong.
* LD: avoiding PROBGITS warning, moved _CONTEXT to data
* Updater: Added version check on update package - refusing to install outdated
Co-authored-by: あく <alleteam@gmail.com>
* Initial C iButton app setup
* Add more scenes
* Add even more scenes
* Add even more scenes again
* More scenes...
* Add key info scene
* Add delete success scene
* Use scene state to store internal data
* Add parameter parsing
* Add emulate scene
* Add write scene
* Add write success scene
* Add Read scene
* Add read success scene
* Add exit confirm scene
* Add retry confirm scene
* Add CRC error scene
* Add not key scene
* Add read key menu scene
* Rename some scenes
* Refactor conditionals
* Remove unneeded custom events
* Remove the old iButton app
* Correct formatting
* Remove rogue comments and function prototypes
* iButton: cleanup merge artifacts and fix warnings
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* Updater: UI rework initial
* Updater: further updates to UI, added a temporary parrot
* Updater: additional checks on radio stack type before update
* Second iteration of updater UI: additional handling of resource unpacking errors
* updater: removed extra logging, renamed some stages
* Updater: Changed "back" button icon on error screen
* Archive: signed/unsigned fix
* Updater: cancelling update also cancels LFS+resources processing; restored /ext/update/ folder magic to 0
* Updater: root dir fix
Co-authored-by: nminaylov <nm29719@gmail.com>
* Fixing compiler warnings with -Wextra
* More warnings suppression, WIP
* Even more warning fixes
* Added new lines at end of text files.
* Padding fix
* Additional fixes to warnings on different build configurations; added -Wextra to default build pipeline
* Fixes for Secplus v1
* -additional warnings
* +-Wredundant-decls fixes
* FuriHal: print stack overflow task name in console
* FuriHal: add missing include
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* Music player: cli tool and new worker
* Music player cli: flush message
* Music player: fix note calculation
* MusicPlayer: fix # parsing and add magic
* FuriHal: improve speaker volume handling. MusicPlayer: minor sustain improvements
* MusicPlayer: fix buffer overseek
* FuriHal: drop unused variables
* MusicPlayer: LFO 4 magic
* MusicPlayer: add RTTTL parser
* MusicPlayer: refactoring and add file open dialog on start
* MusicPlayer: fix memcpy issue and more
* FuriHal: force disconnect USB on early init and then leave usb line alone for some time.
* FuriHal: switch speaker to old volume. MusicPlayer: fix incorrect note history, and drop lfo from worker.
Co-authored-by: DrZlo13 <who.just.the.doctor@gmail.com>
* [FL-2515] Keep backlight on for updater ops
* Notification: Renamed backlight sequences to more obvious names
Co-authored-by: あく <alleteam@gmail.com>
* Disable USART in sleep
* Restore UART state on suspend/resume
* FuriHal: Enable stop mode and add insomnia to I2C and SPI
* Remove IDLE interrupt
* FuriHal: add FPU isr and disable all FPU interrupt, add core2 stop mode configuration on deep sleep
* FuriHal: tie stop mode debug with debug rtc flag
* FuriHal: adjust flash latency on clock switch, tie mcu debug with RTC debug flag
* FuriHal: move resource init to early stage
* Add EXTI pending check, enable debug traps with compile-time flag
* Wrap sleep debug functions in conditional compilation
* Remove erroneous changed
* Do not use CSS, remove it from everywhere
* Enable/disable USB on VBUS connect (prototype)
* FuriHal: add LPMS and DEEPSLEEP magic, workaround state inconsistency between cores
* FuriHal: honor c1 LMPS
* USB mode switch fix
* Applications: add flags and insomnia bypass system
* Correct spelling
* FuriHal: cleanup insomnia usage, reset sleep flags on wakeup, add shutdown api
* FuriHal: extra check on reinit request
* FuriHal: rename gpio_display_rst pin to gpio_display_rst_n
* FuriHal: add debug HAL
* FuriHal: add some magic to core2 reload procedure, fix issue with crash on ble keyboard exit
* FuriHal: cleanup ble glue, add BLE_GLUE_DEBUG flag
* FuriHal: ble reinit API, move os timer to LPTIM1 for deep sleep capability, shutdown that works
* FuriHal: take insomnia while shutdown
* Remove USB switch on/off on VBUS change
* Better tick skew handling
* Improve tick consistency under load
* Add USB_HP dummy IRQ handler
* Move interrupt check closer to sleep
* Clean up includes
* Re-enable Insomnia globally
* FuriHal: enable CSS
* FuriHal: remove questionable core2 clock shenanigans
* FuriHal: use core1 RCC registers in idle timer config
* FuriHal: return back CSS handlers, add lptim isr dispatching
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
Co-authored-by: nminaylov <nm29719@gmail.com>
* CLI: session refactoring
* Added forgotten define
* Desktop lock state save
* Dolphin: use proper type for value returned by dolphin_state_xp_to_levelup
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* C2OTA: wip
* Update Cube to 1.13.3
* Fixed prio
* Functional Core2 updater
* Removed hardware CRC usage; code cleanup & linter fixes
* Moved hardcoded stack params to copro.mk
* Fixing CI bundling of core2 fw
* Removed last traces of hardcoded radio stack
* OB processing draft
* Python scripts cleanup
* Support for comments in ob data
* Sacrificed SD card icon in favor of faster update. Waiting for Storage fix
* Additional handling for OB mismatched values
* Description for new furi_hal apis; spelling fixes
* Rework of OB write, WIP
* Properly restarting OB verification loop
* Split update_task_workers.c
* Checking OBs after enabling post-update mode
* Moved OB verification before flashing
* Removed ob.data for custom stacks
* Fixed progress calculation for OB
* Removed unnecessary OB mask cast
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* NFC: fix memory corruption in nfc_worker_read_mifare_desfire
* NFC: if the NFC tag doesn't have apps or files, don't try to save them.
* NFC: make-format
Co-authored-by: Jack Doan <jackdoan@rivian.com>
Co-authored-by: Skorpionm <85568270+Skorpionm@users.noreply.github.com>
Co-authored-by: Nikolay Minaylov <nm29719@gmail.com>
Co-authored-by: あく <alleteam@gmail.com>
* SubGhz: fix the RAW file is not restored when it is launched from under the folder
* SubGhz: fix does not fit long RAW file name
* SubGhz: fix Read not cleared after file rename
* SubGhz: fix restore default frequency and modulation on output
* SubGhz: fix long name output in RAW
* Renamed assets->resources; enforcing Manifest build if it does not exist
* Rebuild resources from CI
* Added Manifest to repo - be sure to rebuild it with `make -C assets` before committing changes!
* Actually added Manifest.
* Keeping Manifest on assets clean
* Spelling fix in Makefile
