* Add Mifare classic 1k JC handling
Add mifare classic Javacard emulation handling
* Adding MIFARE 1K Javacard Emulation Compatibility
MIFARE Classic 1K Cards from NXP have the SAK value of 0x08.
MIFARE Classic 1K Cards that are emulated via javacard applet have an SAK value of 0x09.
Adding the SAK values accordingly so that Javacard emulated mifare classic tags are properly handled.
* update mifare_common.c
added javacard emulation handling for mifare classic 1k
Co-authored-by: gornekich <n.gorbadey@gmail.com>
Co-authored-by: あく <alleteam@gmail.com>
* Move structs to header
* roll mbedtls into loclass
* Picopass with scene for reading card
* Picopass: fix memory leak
* Lib: return mbedtls back
* Picopass: rename symbols to match naming guide
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* add mdedtls for des3 implementation
* add localss from RfidResearchGroup/proxmark3
* picopass reader app and rfal for communicating with picopass cards
* always turn off field
* close storage when keys are not found
* Add mbedtls as submodule
* add mbedtl_config
* Switched to only including specific mbedtls files I need. Thank you @kevinwallace
* cherry-pick kevinwallace sconsify
* scons for mbedtls/loclass
* Reset to ready state on error
* unsigned FC/CN
* clean FC/CN if not decoded
Co-authored-by: hedger <hedger@users.noreply.github.com>
Co-authored-by: あく <alleteam@gmail.com>
Co-authored-by: Kevin Wallace <git+flipperzero@kevin.wallace.seattle.wa.us>
* Adding MIFARE 1K Infineon Compatibility
As per Issue #1342,
MIFARE Classic 1K Cards from NXP have the SAK value of 0x08.
MIFARE Classic 1K Cards from Infineon have an SAK value of 0x88.
Adding the SAK values accordingly so that Infineon tags are properly handled.
* nfc: refactor nfc_worker_read_mifare_desfire to use furi_hal_nfc_tx_rx
Renames furi_hal_nfc_exchange_full to furi_hal_nfc_tx_rx_full, and
rewrites it to use furi_hal_nfc_tx_rx. This eliminates the final
remaining use of furi_hal_nfc_exchange, so remove that.
* nfc: write debug.pcap when debug mode enabled
Limited to NFC protocols that use furi_hal_nfc_tx_rx to communicate.
* switch to Doxygen style comment
Co-authored-by: Kevin Wallace <git+flipperzero@kevin.wallace.seattle.wa.us>
Co-authored-by: あく <alleteam@gmail.com>
* SubGhz: add frequency support 310 MHz
* SubGhz: deleting a TMP file using the "Erase" button in Read RAW
* SubGhz: fix frequency analyzer scan speed
* SubGhz: fix start duration came_atomo protocol
* SubGhz: refactoring subghz_setting
* SubGhz: refactoring load setting frequency analyzer
* SubGhz: fix load setting, default frequency
* SubGhz: patch raw temp file remove code to work with string_t
* Storage: parallel safe cli
* SubGhz: new frequency settings loading system
* Assets: recompile to include latest subghz custom frequency control changes
Co-authored-by: あく <alleteam@gmail.com>
* SubGhz: fix frequency reset on incomplete exit from the transmission menu
* SubGhz: fix incorrect shutdown of CC1101 if it was not turned on
* SubGhz: consciousness and transmission support Security+ 1.0
* Unit_test: add test encoder Security+ 1/0
* SubGhz: fix start counter Security+ 1.0
Co-authored-by: SG <who.just.the.doctor@gmail.com>
Co-authored-by: あく <alleteam@gmail.com>
* File browser module and test app
* nfc: Add support for saved files in subdirectories
* nfc: Use helper function to get shadow path when loading data
* File browser dialog integration pt.1
* File browser dialog integration pt.2
* Gui,Dialogs: drop file select
* Correct use of dynamic string_t(string_ptr)
Co-authored-by: Yukai Li <yukaili.geek@gmail.com>
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* nfc: Add NTAG I2C (Plus) 1K/2K read support
* nfc: Add rudimentary NTAG I2C emulation
* nfc: Closer NTAG I2C emulation plus debug logging
* nfc: Fix NTAG I2C sector select emulation
* nfc: Add security for NTAG I2C
* nfc: Send NAK correctly for MFUL reads
* nfc: Better emulate NTAG I2C SECTOR_SELECT behavior
* nfc: Fix non-I2C Ultralight read
Per datasheet, max sector for SECTOR_SELECT is 0xfe, so 0xff is OK
as uninit value
* nfc: Only read sig for NTAG if supported
Attempting to read signature breaks immediate call to sector select on
NTAG I2C original for some reason, so don't read signature if the
command is not supported
Co-authored-by: gornekich <n.gorbadey@gmail.com>
Only the bottom nybble of buf[1] is the key ID; the top nybble contains flags.
Notably, the top bit is set for AES mode on EV1+ cards, and ORCA cards in the
Seattle area were just upgraded to include an app that uses AES.
Prior to this, cards with flags set could be read and saved just fine, but
loading them would fail due to missing keys. After this, tags saved with the
old version will load fine, and when re-saved will have the flags separated
out into a new field.
Co-authored-by: Kevin Wallace <git+flipperzero@kevin.wallace.seattle.wa.us>
Co-authored-by: gornekich <n.gorbadey@gmail.com>
Co-authored-by: あく <alleteam@gmail.com>
* SubGhz: MegaCode display changes
* SubGhz: refactoring frequency analyzer
* SubGhz: use one stage detection in frequency analyzer, tune bw, datarate and etc
* SubGhz: tune analyzer threshold
* SubGhz: raise frequency analyzer threshold and rssi sampling config
* SubGhz: fix frequency analyzer, small step frequency analysis
* SubGhz: subghz_frequency_analyzer_worker
* SubGhz: fix SUBGHZ_FREQUENCY_ANALYZER_THRESHOLD
* SubGhz: debug logging in frequency analyzer, increase MAGN_TARGET to max value
* SubGhz: reduce RSSI delay in frequency scanner
* SubGhz: fix delays, remove trace logging from frequency analyzer
* SubGhz: cleanup variable names and add comments
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
The country_code does not always have extra pad bytes, so incrementing the index by 2 in emv_decode_read_sfi_record() was too much.
Co-authored-by: Gary <gary@x1z.net>
Co-authored-by: gornekich <n.gorbadey@gmail.com>
* Updater: Migrating to new manifest path convention
* RPC: Added update preparation status to RPC
* RPC: bumped protobuf submodule
* Bumped protobuf_version.h
* FuriCore: add missing include. Lib: make mlib smaller
* Explicitly tell where we have doubles and fix random in animations
* makefile: added -DLFS_NO_DEBUG
* Updater: path len constant dedup
* Updater: checking for hardware version match before parsing manifest
* LD: moved _DRIVER_CONTEXT sections to .bss, where they belong.
* LD: avoiding PROBGITS warning, moved _CONTEXT to data
* Updater: Added version check on update package - refusing to install outdated
Co-authored-by: あく <alleteam@gmail.com>
* Updater: UI rework initial
* Updater: further updates to UI, added a temporary parrot
* Updater: additional checks on radio stack type before update
* Second iteration of updater UI: additional handling of resource unpacking errors
* updater: removed extra logging, renamed some stages
* Updater: Changed "back" button icon on error screen
* Archive: signed/unsigned fix
* Updater: cancelling update also cancels LFS+resources processing; restored /ext/update/ folder magic to 0
* Updater: root dir fix
Co-authored-by: nminaylov <nm29719@gmail.com>
* Fixing compiler warnings with -Wextra
* More warnings suppression, WIP
* Even more warning fixes
* Added new lines at end of text files.
* Padding fix
* Additional fixes to warnings on different build configurations; added -Wextra to default build pipeline
* Fixes for Secplus v1
* -additional warnings
* +-Wredundant-decls fixes
* FuriHal: print stack overflow task name in console
* FuriHal: add missing include
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* [FL-2515] Keep backlight on for updater ops
* Notification: Renamed backlight sequences to more obvious names
Co-authored-by: あく <alleteam@gmail.com>
* Disable USART in sleep
* Restore UART state on suspend/resume
* FuriHal: Enable stop mode and add insomnia to I2C and SPI
* Remove IDLE interrupt
* FuriHal: add FPU isr and disable all FPU interrupt, add core2 stop mode configuration on deep sleep
* FuriHal: tie stop mode debug with debug rtc flag
* FuriHal: adjust flash latency on clock switch, tie mcu debug with RTC debug flag
* FuriHal: move resource init to early stage
* Add EXTI pending check, enable debug traps with compile-time flag
* Wrap sleep debug functions in conditional compilation
* Remove erroneous changed
* Do not use CSS, remove it from everywhere
* Enable/disable USB on VBUS connect (prototype)
* FuriHal: add LPMS and DEEPSLEEP magic, workaround state inconsistency between cores
* FuriHal: honor c1 LMPS
* USB mode switch fix
* Applications: add flags and insomnia bypass system
* Correct spelling
* FuriHal: cleanup insomnia usage, reset sleep flags on wakeup, add shutdown api
* FuriHal: extra check on reinit request
* FuriHal: rename gpio_display_rst pin to gpio_display_rst_n
* FuriHal: add debug HAL
* FuriHal: add some magic to core2 reload procedure, fix issue with crash on ble keyboard exit
* FuriHal: cleanup ble glue, add BLE_GLUE_DEBUG flag
* FuriHal: ble reinit API, move os timer to LPTIM1 for deep sleep capability, shutdown that works
* FuriHal: take insomnia while shutdown
* Remove USB switch on/off on VBUS change
* Better tick skew handling
* Improve tick consistency under load
* Add USB_HP dummy IRQ handler
* Move interrupt check closer to sleep
* Clean up includes
* Re-enable Insomnia globally
* FuriHal: enable CSS
* FuriHal: remove questionable core2 clock shenanigans
* FuriHal: use core1 RCC registers in idle timer config
* FuriHal: return back CSS handlers, add lptim isr dispatching
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
Co-authored-by: nminaylov <nm29719@gmail.com>
* C2OTA: wip
* Update Cube to 1.13.3
* Fixed prio
* Functional Core2 updater
* Removed hardware CRC usage; code cleanup & linter fixes
* Moved hardcoded stack params to copro.mk
* Fixing CI bundling of core2 fw
* Removed last traces of hardcoded radio stack
* OB processing draft
* Python scripts cleanup
* Support for comments in ob data
* Sacrificed SD card icon in favor of faster update. Waiting for Storage fix
* Additional handling for OB mismatched values
* Description for new furi_hal apis; spelling fixes
* Rework of OB write, WIP
* Properly restarting OB verification loop
* Split update_task_workers.c
* Checking OBs after enabling post-update mode
* Moved OB verification before flashing
* Removed ob.data for custom stacks
* Fixed progress calculation for OB
* Removed unnecessary OB mask cast
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* SubGhz: fix the RAW file is not restored when it is launched from under the folder
* SubGhz: fix does not fit long RAW file name
* SubGhz: fix Read not cleared after file rename
* SubGhz: fix restore default frequency and modulation on output
* SubGhz: fix long name output in RAW
* Renamed assets->resources; enforcing Manifest build if it does not exist
* Rebuild resources from CI
* Added Manifest to repo - be sure to rebuild it with `make -C assets` before committing changes!
* Actually added Manifest.
* Keeping Manifest on assets clean
* Spelling fix in Makefile
* Assets: recompile
* Makefile: add debug_other to main makefile
* Github: stop compilation if compiled assets not in sync with assets sources
* Assets: recompile
* Makefile: correct debug_other rule. Bt: prevent on system start hook from waiting for bt service
* Power, FuriHal: gauge self check report
* Loader: move on system start hook call to the beginning
* Add Auto Lock Time setting
* Update .gitignore
* Add value_index toolbox module
* Auto locking basic implementation
* Better AutoLock implementation, edge cases and cleanup
* Fix NULL pointer crash
* Turn off backlight shortly in locked mode
* Re-enable auto lock after pin lock
* Correctly handle start when pin locked
* Use timer to hide locked hint
* Use a single state variable instead of multiple bools
* Do not call update callback recursively
* Allow input when the Unlocked hint is shown
* Add a delay to backlight switch off while locking
* Better user input handling
* Switch backlight off after pin timeout
* Correct grammar in notification settings
Co-authored-by: あく <alleteam@gmail.com>
* WIP on stripping fw
* Compact FW build - use RAM_EXEC=1 COMPACT=1 DEBUG=0
* Fixed uninitialized storage struct; small fixes to compact fw
* Flasher srv w/mocked flash ops
* Fixed typos & accomodated FFF changes
* Alternative fw startup branch
* Working load & jmp to RAM fw
* +manifest processing for stage loader; + crc verification for stage payload
* Fixed questionable code & potential leaks
* Lowered screen update rate; added radio stack update stubs; working dfu write
* Console EP with manifest & stage validation
* Added microtar lib; minor ui fixes for updater
* Removed microtar
* Removed mtar #2
* Added a better version of microtar
* TAR archive api; LFS backup & restore core
* Recursive backup/restore
* LFS worker thread
* Added system apps to loader - not visible in UI; full update process with restarts
* Typo fix
* Dropped BL & f6; tooling for updater WIP
* Minor py fixes
* Minor fixes to make it build after merge
* Ported flash workaround from BL + fixed visuals
* Minor cleanup
* Chmod + loader app search fix
* Python linter fix
* Removed usb stuff & float read support for staged loader == -10% of binary size
* Added backup/restore & update pb requests
* Added stub impl to RPC for backup/restore/update commands
* Reworked TAR to use borrowed Storage api; slightly reduced build size by removing `static string`; hidden update-related RPC behind defines
* Moved backup&restore to storage
* Fixed new message types
* Backup/restore/update RPC impl
* Moved furi_hal_crc to LL; minor fixes
* CRC HAL rework to LL
* Purging STM HAL
* Brought back minimal DFU boot mode (no gui); additional crc state checks
* Added splash screen, BROKEN usb function
* Clock init rework WIP
* Stripped graphics from DFU mode
* Temp fix for unused static fun
* WIP update picker - broken!
* Fixed UI
* Bumping version
* Fixed RTC setup
* Backup to update folder instead of ext root
* Removed unused scenes & more usb remnants from staged loader
* CI updates
* Fixed update bundle name
* Temporary restored USB handler
* Attempt to prevent .text corruption
* Comments on how I spent this Saturday
* Added update file icon
* Documentation updates
* Moved common code to lib folder
* Storage: more unit tests
* Storage: blocking dir open, differentiate file and dir when freed.
* Major refactoring; added input processing to updater to allow retrying on failures (not very useful prob). Added API for extraction of thread return value
* Removed re-init check for manifest
* Changed low-level path manipulation to toolbox/path.h; makefile cleanup; tiny fix in lint.py
* Increased update worker stack size
* Text fixes in backup CLI
* Displaying number of update stages to run; removed timeout in handling errors
* Bumping version
* Added thread cleanup for spawner thread
* Updated build targets to exclude firmware bundle from 'ALL'
* Fixed makefile for update_package; skipping VCP init for update mode (ugly)
* Switched github build from ALL to update_package
* Added +x for dist_update.sh
* Cli: add total heap size to "free" command
* Moved (RAM) suffix to build version instead of git commit no.
* DFU comment
* Some fixes suggested by clang-tidy
* Fixed recursive PREFIX macro
* Makefile: gather all new rules in updater namespace. FuriHal: rename bootloader to boot, isr safe delays
* Github: correct build target name in firmware build
* FuriHal: move target switch to boot
* Makefile: fix firmware flash
* Furi, FuriHal: move kernel start to furi, early init
* Drop bootloader related stuff
* Drop cube. Drop bootloader linker script.
* Renamed update_hl, moved constants to #defines
* Moved update-related boot mode to separate bitfield
* Reworked updater cli to single entry point; fixed crash on tar cleanup
* Added Python replacement for dist shell scripts
* Linter fixes for dist.py +x
* Fixes for environment suffix
* Dropped bash scripts
* Added dirty build flag to version structure & interfaces
* Version string escapes
* Fixed flag logic in dist.py; added support for App instances being imported and not terminating the whole program
* Fixed fw address in ReadMe.md
* Rpc: fix crash on double screen start
* Return back original boot behavior and fix jump to system bootloader
* Cleanup code, add error sequence for RTC
* Update firmware readme
* FuriHal: drop boot, restructure RTC registers usage and add header register check
* Furi goes first
* Toolchain: add ccache support
* Renamed update bundle dir
Co-authored-by: DrZlo13 <who.just.the.doctor@gmail.com>
Co-authored-by: あく <alleteam@gmail.com>
* [FL-2431] SubGhz: fix Restart with an error (HardFault), while maintaining the RAW signal.
* Stream: fix adding maximum string length to arguments
* [FL-2419] SubGhz: fix flipper hang/Fatal Error when running edited Sub-GHz file.
* SubGhz: remove replace strcpy with strncpy, smaller text buffer and canary
* SubGhz: log key loading before load happen, rollback only rx message handling
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* Storage: correct replacement for "/any" path in path holder
* Unit tests: storage, blocking file open test
* File stream: error getter
* Storage: common copy and common remove now executes in external thread
* Filesystems: got rid of unused functions
* Storage: untangle dependencies, ram-frendly filesystem api
* iButton: context assertions
* Storage: pubsub messages
* Storage: wait for the file to close if it was open
* Storage: fix folder copying
* Storage: unit test
* Storage: pubsub documentation
* Fix merge error
* Fix memleak in storage test
* Storage: remove unused define
Co-authored-by: あく <alleteam@gmail.com>
* gpio, hsem, crypto: switch from HAL to LL/registers
* Moved GPIO initialization to furi_hal
* More HAL removed
* All HAL modules disabled
* HAL is finally removed
* hal_gpio -> furi_hal_gpio, main.h removed
* Bootloader build fix
* RTOS config moved to freertos-glue
* delay -> furi_hal_delay
Co-authored-by: あく <alleteam@gmail.com>
* FuriHal: refactor interrupts subsystem
* Furi,FuriHal: gather all ISRs under interrupt API, improve crtitical section and cleanup garbage
* FuriHal: mirgate ipcc and hsem to LL
* Format Sources
* FuriHal,BleGlue: move to new critical section
* Format Sources
* FuriHal: correct flash locking
* FuriHal: replace critical section with interrupt disable in OS routine, minor fixex
* FuriHal: new speaker HAL
* FuriHal: drop PWM
* FuriHal: move COMP1 to LL
* FuriHal: move COMP1 to LL backport to F6
* FuriHal: remove missing gpio_rfid_carrier from F6
* FurHal: use LL for system controls in flash HAL
* Drop F6 source tree
* Drop F6 from GitHub workflow
* Tie USE_FULL_ASSERT with APP_UNIT_TESTS
* Speaker: return to old volume calculation
* FreeRTOS: move TCB header to glue
Co-authored-by: DrZlo13 <who.just.the.doctor@gmail.com>
* Fix TextBox word wrap behavior
* Wrap width is 120 pixels, not 140. (140 is larger than the screen!)
* Glyph width already includes spacing; don't add 1 additional px
* When starting a new line, include wrapped glyph width in new line_width.
* Call canvas_set_font before text_box_insert_endline so that glyph
width is calculated using correct font.
Previous approach worked somewhat well using default TextBoxFontText but
this version is more robust, particularly when using TextBoxFontHex.
* Add basic Mifare DESFire reading, file/app browser
* Fix build with APP_ARCHIVE=0
* Add bool type to flipper_format
* Add ability to save and load DESFire card data
* Skip over NfcSceneDeviceInfo when viewing saved DESFire info
* mf_df_clear: don't leak master key settings key versions
* When opening a DESFire card from Archive, retain UID emulation behavior
* rm unnecessary \r\n
* show Popup instead of leaving view in bad state
* Move NfcReaderRequestData out of union
This makes it safe to emulate DESFire/EMV without clobbering card data.
* Display saved DESFire cards via NfcSceneDeviceInfo
* Display and save file metadata even when contents are missing
This can happen when a file doesn't allow unauthenticated reads (see the
call to mf_df_parse_read_data_response in nfc_worker.c).
Co-authored-by: Kevin Wallace <git+flipperzero@kevin.wallace.seattle.wa.us>
Co-authored-by: あく <alleteam@gmail.com>
Co-authored-by: gornekich <n.gorbadey@gmail.com>
* Streams: string stream
* String stream: updated insert/delete api
* Streams: generic stream interface and string stream implementation
* Streams: helpers for insert and delete_and_insert
* FFF: now compatible with streams
* MinUnit: introduced tests with arguments
* FFF: stream access violation
* Streams: copy data between streams
* Streams: file stream
* FFF: documentation
* FFStream: documentation
* FFF: alloc as file
* MinUnit: support for nested tests
* Streams: changed delete_and_insert, now it returns success flag. Added ability dump stream inner parameters and data to cout.
* FFF: simplified file open function
* Streams: unit tests
* FFF: tests
* Streams: declare cache_size constant as define, to allow variable modified arrays
* FFF: lib moved to a separate folder
* iButton: new FFF
* RFID: new FFF
* Animations: new FFF
* IR: new FFF
* NFC: new FFF
* Flipper file format: delete lib
* U2F: new FFF
* Subghz: new FFF and streams
* Streams: read line
* Streams: split
* FuriCore: implement memset with extra asserts
* FuriCore: implement extra heap asserts without inventing memset
* Scene manager: protected access to the scene id stack with a size check
* NFC worker: dirty fix for issue where hal_nfc was busy on app start
* Furi: update allocator to erase memory on allocation. Replace furi_alloc with malloc.
* FuriCore: cleanup memmgr code.
* Furi HAL: furi_hal_init is split into critical and non-critical parts. The critical part is currently clock and console.
* Memmgr: added ability to track allocations and deallocations through console.
* FFStream: some speedup
* Streams, FF: minor fixes
* Tests: restore
* File stream: a slightly more thread-safe version of file_stream_delete_and_insert
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* usb service, removed power observer
* fix usb restart after disable
* remove usb service from apps
* Applcations: remove dead extern
* New thread naming scheme for drivers
* New thread symbol naming scheme for drivers
Co-authored-by: あく <alleteam@gmail.com>
* Power: wait a little bit till message displayed on screen when executing power off. FuriCore: do not use bkpt in release builds(causing HardFault when SPI is active).
* Cleanup BSS section: add more consty consts to be more constish.
* Desktop: properly handle autostarted applications.
