#include "rfal_analogConfigTbl.h"

const uint8_t rfalAnalogConfigCustomSettings[] = {
    /****** Default Analog Configuration for Chip-Specific Reset ******/
    MODE_ENTRY_16_REG( (RFAL_ANALOG_CONFIG_TECH_CHIP | RFAL_ANALOG_CONFIG_CHIP_INIT)
                        , ST25R3916_REG_IO_CONF1, (ST25R3916_REG_IO_CONF1_out_cl_mask | ST25R3916_REG_IO_CONF1_lf_clk_off), 0x07                               /* Disable MCU_CLK */
                        , ST25R3916_REG_IO_CONF2, (ST25R3916_REG_IO_CONF2_miso_pd1 | ST25R3916_REG_IO_CONF2_miso_pd2 ), 0x18                                   /* SPI Pull downs */
                        // , ST25R3916_REG_IO_CONF2,  ST25R3916_REG_IO_CONF2_aat_en, ST25R3916_REG_IO_CONF2_aat_en                                                /* Enable AAT */
                        , ST25R3916_REG_TX_DRIVER, ST25R3916_REG_TX_DRIVER_d_res_mask, 0x00                                                                    /* Set RFO resistance Active Tx */
                        , ST25R3916_REG_RES_AM_MOD, 0xFF, 0x80                                                                                                 /* Use minimum non-overlap */
                        , ST25R3916_REG_FIELD_THRESHOLD_ACTV,   ST25R3916_REG_FIELD_THRESHOLD_ACTV_trg_mask, ST25R3916_REG_FIELD_THRESHOLD_ACTV_trg_105mV      /* Lower activation threshold (higher than deactivation)*/
                        , ST25R3916_REG_FIELD_THRESHOLD_ACTV,   ST25R3916_REG_FIELD_THRESHOLD_ACTV_rfe_mask, ST25R3916_REG_FIELD_THRESHOLD_ACTV_rfe_105mV      /* Lower activation threshold (higher than deactivation)*/
                        , ST25R3916_REG_FIELD_THRESHOLD_DEACTV, ST25R3916_REG_FIELD_THRESHOLD_DEACTV_trg_mask, ST25R3916_REG_FIELD_THRESHOLD_DEACTV_trg_75mV   /* Lower deactivation threshold */
                        , ST25R3916_REG_FIELD_THRESHOLD_DEACTV, ST25R3916_REG_FIELD_THRESHOLD_DEACTV_rfe_mask, ST25R3916_REG_FIELD_THRESHOLD_DEACTV_rfe_75mV   /* Lower deactivation threshold */
                        , ST25R3916_REG_AUX_MOD, ST25R3916_REG_AUX_MOD_lm_ext, ST25R3916_REG_AUX_MOD_lm_ext                                                    /* Disable External Load Modulation */
                        , ST25R3916_REG_AUX_MOD, ST25R3916_REG_AUX_MOD_lm_dri, ST25R3916_REG_AUX_MOD_lm_dri                                                    /* Use internal Load Modulation */
                        , ST25R3916_REG_PASSIVE_TARGET, ST25R3916_REG_PASSIVE_TARGET_fdel_mask, (5U<<ST25R3916_REG_PASSIVE_TARGET_fdel_shift)                  /* Adjust the FDT to be aligned with the bitgrid  */
                        , ST25R3916_REG_PT_MOD, (ST25R3916_REG_PT_MOD_ptm_res_mask | ST25R3916_REG_PT_MOD_pt_res_mask), 0x0f                                   /* Reduce RFO resistance in Modulated state */
                        , ST25R3916_REG_EMD_SUP_CONF, ST25R3916_REG_EMD_SUP_CONF_rx_start_emv, ST25R3916_REG_EMD_SUP_CONF_rx_start_emv_on                      /* Enable start on first 4 bits */
                        , ST25R3916_REG_ANT_TUNE_A, 0xFF, 0x82                                                                                                 /* Set Antenna Tuning (Poller): ANTL */
                        , ST25R3916_REG_ANT_TUNE_B, 0xFF, 0x82                                                                                                 /* Set Antenna Tuning (Poller): ANTL */
                        , 0x84U, 0x10, 0x10                                                                                                                     /* Avoid chip internal overheat protection */
                        )
    
    /****** Default Analog Configuration for Chip-Specific Poll Common ******/
    , MODE_ENTRY_9_REG( (RFAL_ANALOG_CONFIG_TECH_CHIP | RFAL_ANALOG_CONFIG_CHIP_POLL_COMMON)
                        , ST25R3916_REG_MODE, ST25R3916_REG_MODE_tr_am  , ST25R3916_REG_MODE_tr_am_am                                           /* Use AM modulation */      
                        , ST25R3916_REG_TX_DRIVER, ST25R3916_REG_TX_DRIVER_am_mod_mask, ST25R3916_REG_TX_DRIVER_am_mod_12percent                /* Set Modulation index */
                        , ST25R3916_REG_AUX_MOD, (ST25R3916_REG_AUX_MOD_dis_reg_am | ST25R3916_REG_AUX_MOD_res_am), 0x00                           /* Use AM via regulator */
                        , ST25R3916_REG_ANT_TUNE_A, 0xFF, 0x82                                                                                  /* Set Antenna Tuning (Poller): ANTL */
                        , ST25R3916_REG_ANT_TUNE_B, 0xFF, 0x82                                                                                  /* Set Antenna Tuning (Poller): ANTL */
                        , ST25R3916_REG_OVERSHOOT_CONF1,  0xFF, 0x00                                                                            /* Disable Overshoot Protection  */
                        , ST25R3916_REG_OVERSHOOT_CONF2,  0xFF, 0x00                                                                            /* Disable Overshoot Protection  */
                        , ST25R3916_REG_UNDERSHOOT_CONF1, 0xFF, 0x00                                                                            /* Disable Undershoot Protection */
                        , ST25R3916_REG_UNDERSHOOT_CONF2, 0xFF, 0x00                                                                            /* Disable Undershoot Protection */
                        )

                      
    /****** Default Analog Configuration for Poll NFC-A Rx Common ******/
    , MODE_ENTRY_1_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCA | RFAL_ANALOG_CONFIG_BITRATE_COMMON | RFAL_ANALOG_CONFIG_RX)
                      , ST25R3916_REG_AUX,  ST25R3916_REG_AUX_dis_corr, ST25R3916_REG_AUX_dis_corr_correlator                                   /* Use Correlator Receiver */
                      )
                      
    /****** Default Analog Configuration for Poll NFC-A Tx 106 ******/
    , MODE_ENTRY_5_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCA | RFAL_ANALOG_CONFIG_BITRATE_106 | RFAL_ANALOG_CONFIG_TX)
                      , ST25R3916_REG_MODE, ST25R3916_REG_MODE_tr_am, ST25R3916_REG_MODE_tr_am_ook                                              /* Use OOK */
                      , ST25R3916_REG_OVERSHOOT_CONF1,  0xFF, 0x40                                                                              /* Set default Overshoot Protection */
                      , ST25R3916_REG_OVERSHOOT_CONF2,  0xFF, 0x03                                                                              /* Set default Overshoot Protection */
                      , ST25R3916_REG_UNDERSHOOT_CONF1, 0xFF, 0x40                                                                              /* Set default Undershoot Protection */
                      , ST25R3916_REG_UNDERSHOOT_CONF2, 0xFF, 0x03                                                                              /* Set default Undershoot Protection */
                      )
                      
    /****** Default Analog Configuration for Poll NFC-A Rx 106 ******/
    , MODE_ENTRY_6_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCA | RFAL_ANALOG_CONFIG_BITRATE_106 | RFAL_ANALOG_CONFIG_RX)
                      , ST25R3916_REG_RX_CONF1,   0xFF, 0x08
                      , ST25R3916_REG_RX_CONF2,   0xFF, 0x2D
                      , ST25R3916_REG_RX_CONF3,   0xFF, 0x00
                      , ST25R3916_REG_RX_CONF4,   0xFF, 0x00
                      , ST25R3916_REG_CORR_CONF1, 0xFF, 0x51
                      , ST25R3916_REG_CORR_CONF2, 0xFF, 0x00
                      )

    /****** Default Analog Configuration for Poll NFC-A Tx 212 ******/
    , MODE_ENTRY_7_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCA | RFAL_ANALOG_CONFIG_BITRATE_212 | RFAL_ANALOG_CONFIG_TX)
                      , ST25R3916_REG_MODE, ST25R3916_REG_MODE_tr_am  , ST25R3916_REG_MODE_tr_am_am                                             /* Use AM modulation */
                      , ST25R3916_REG_AUX_MOD, (ST25R3916_REG_AUX_MOD_dis_reg_am | ST25R3916_REG_AUX_MOD_res_am), 0x88                             /* Use Resistive AM */
                      , ST25R3916_REG_RES_AM_MOD, ST25R3916_REG_RES_AM_MOD_md_res_mask, 0x7F                                      /* Set Resistive modulation */
                      , ST25R3916_REG_OVERSHOOT_CONF1,  0xFF, 0x40                                                                              /* Set default Overshoot Protection  */
                      , ST25R3916_REG_OVERSHOOT_CONF2,  0xFF, 0x03                                                                              /* Set default Overshoot Protection  */
                      , ST25R3916_REG_UNDERSHOOT_CONF1, 0xFF, 0x40                                                                              /* Set default Undershoot Protection */
                      , ST25R3916_REG_UNDERSHOOT_CONF2, 0xFF, 0x03                                                                              /* Set default Undershoot Protection */
                      )
                      
    /****** Default Analog Configuration for Poll NFC-A Rx 212 ******/
    , MODE_ENTRY_6_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCA | RFAL_ANALOG_CONFIG_BITRATE_212 | RFAL_ANALOG_CONFIG_RX)
                      , ST25R3916_REG_RX_CONF1,   0xFF, 0x02
                      , ST25R3916_REG_RX_CONF2,   0xFF, 0x3D
                      , ST25R3916_REG_RX_CONF3,   0xFF, 0x00
                      , ST25R3916_REG_RX_CONF4,   0xFF, 0x00
                      , ST25R3916_REG_CORR_CONF1, 0xFF, 0x14
                      , ST25R3916_REG_CORR_CONF2, 0xFF, 0x00
                      )
                      
    /****** Default Analog Configuration for Poll NFC-A Tx 424 ******/                      
    , MODE_ENTRY_7_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCA | RFAL_ANALOG_CONFIG_BITRATE_424 | RFAL_ANALOG_CONFIG_TX)
                      , ST25R3916_REG_MODE, ST25R3916_REG_MODE_tr_am  , ST25R3916_REG_MODE_tr_am_am                                             /* Use AM modulation */
                      , ST25R3916_REG_AUX_MOD, (ST25R3916_REG_AUX_MOD_dis_reg_am | ST25R3916_REG_AUX_MOD_res_am), 0x88                             /* Use Resistive AM */
                      , ST25R3916_REG_RES_AM_MOD, ST25R3916_REG_RES_AM_MOD_md_res_mask, 0x7F                                                    /* Set Resistive modulation */
                      , ST25R3916_REG_OVERSHOOT_CONF1,  0xFF, 0x40                                                                              /* Set default Overshoot Protection  */
                      , ST25R3916_REG_OVERSHOOT_CONF2,  0xFF, 0x03                                                                              /* Set default Overshoot Protection  */
                      , ST25R3916_REG_UNDERSHOOT_CONF1, 0xFF, 0x40                                                                              /* Set default Undershoot Protection */
                      , ST25R3916_REG_UNDERSHOOT_CONF2, 0xFF, 0x03                                                                              /* Set default Undershoot Protection */
                      )

    /****** Default Analog Configuration for Poll NFC-A Rx 424 ******/
    , MODE_ENTRY_6_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCA | RFAL_ANALOG_CONFIG_BITRATE_424 | RFAL_ANALOG_CONFIG_RX)
                      , ST25R3916_REG_RX_CONF1,   0xFF, 0x42
                      , ST25R3916_REG_RX_CONF2,   0xFF, 0x3D
                      , ST25R3916_REG_RX_CONF3,   0xFF, 0x00
                      , ST25R3916_REG_RX_CONF4,   0xFF, 0x00
                      , ST25R3916_REG_CORR_CONF1, 0xFF, 0x54
                      , ST25R3916_REG_CORR_CONF2, 0xFF, 0x00
                      )

    /****** Default Analog Configuration for Poll NFC-A Tx 848 ******/
    , MODE_ENTRY_7_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCA | RFAL_ANALOG_CONFIG_BITRATE_848 | RFAL_ANALOG_CONFIG_TX)
                      , ST25R3916_REG_MODE, ST25R3916_REG_MODE_tr_am  , ST25R3916_REG_MODE_tr_am_am                                             /* Use AM modulation */
                      , ST25R3916_REG_TX_DRIVER, ST25R3916_REG_TX_DRIVER_am_mod_mask, ST25R3916_REG_TX_DRIVER_am_mod_40percent                  /* Set Modulation index */
                      , ST25R3916_REG_AUX_MOD, (ST25R3916_REG_AUX_MOD_dis_reg_am | ST25R3916_REG_AUX_MOD_res_am), 0x00                             /* Use AM via regulator */
                      , ST25R3916_REG_OVERSHOOT_CONF1,  0xFF, 0x00                                                                              /* Disable Overshoot Protection  */
                      , ST25R3916_REG_OVERSHOOT_CONF2,  0xFF, 0x00                                                                              /* Disable Overshoot Protection  */
                      , ST25R3916_REG_UNDERSHOOT_CONF1, 0xFF, 0x00                                                                              /* Disable Undershoot Protection */
                      , ST25R3916_REG_UNDERSHOOT_CONF2, 0xFF, 0x00                                                                              /* Disable Undershoot Protection */
                      )

    /****** Default Analog Configuration for Poll NFC-A Rx 848 ******/
    , MODE_ENTRY_6_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCA | RFAL_ANALOG_CONFIG_BITRATE_848 | RFAL_ANALOG_CONFIG_RX)
                      , ST25R3916_REG_RX_CONF1,   0xFF, 0x42
                      , ST25R3916_REG_RX_CONF2,   0xFF, 0x3D
                      , ST25R3916_REG_RX_CONF3,   0xFF, 0x00
                      , ST25R3916_REG_RX_CONF4,   0xFF, 0x00
                      , ST25R3916_REG_CORR_CONF1, 0xFF, 0x44
                      , ST25R3916_REG_CORR_CONF2, 0xFF, 0x00
                      )
                      
    /****** Default Analog Configuration for Poll NFC-A Anticolision setting ******/
    , MODE_ENTRY_1_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCA | RFAL_ANALOG_CONFIG_BITRATE_COMMON | RFAL_ANALOG_CONFIG_ANTICOL)
                      , ST25R3916_REG_CORR_CONF1, ST25R3916_REG_CORR_CONF1_corr_s6, 0x00                                                            /* Set collision detection level different from data */
                      )

#ifdef RFAL_USE_COHE
    /****** Default Analog Configuration for Poll NFC-B Rx Common ******/
    , MODE_ENTRY_1_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCB | RFAL_ANALOG_CONFIG_BITRATE_COMMON | RFAL_ANALOG_CONFIG_RX)
                      , ST25R3916_REG_AUX,  ST25R3916_REG_AUX_dis_corr, ST25R3916_REG_AUX_dis_corr_coherent                                     /* Use Coherent Receiver */
                      )
#else
    /****** Default Analog Configuration for Poll NFC-B Rx Common ******/
    , MODE_ENTRY_1_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCB | RFAL_ANALOG_CONFIG_BITRATE_COMMON | RFAL_ANALOG_CONFIG_RX)
                        , ST25R3916_REG_AUX,  ST25R3916_REG_AUX_dis_corr, ST25R3916_REG_AUX_dis_corr_correlator                                 /* Use Correlator Receiver */
                        )
#endif /*RFAL_USE_COHE*/

      /****** Default Analog Configuration for Poll NFC-B Rx 106 ******/
    , MODE_ENTRY_6_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCB | RFAL_ANALOG_CONFIG_BITRATE_106 | RFAL_ANALOG_CONFIG_RX)
                      , ST25R3916_REG_RX_CONF1,   0xFF, 0x04
                      , ST25R3916_REG_RX_CONF2,   0xFF, 0x3D
                      , ST25R3916_REG_RX_CONF3,   0xFF, 0x00
                      , ST25R3916_REG_RX_CONF4,   0xFF, 0x00
                      , ST25R3916_REG_CORR_CONF1, 0xFF, 0x1B
                      , ST25R3916_REG_CORR_CONF2, 0xFF, 0x00
                      )

    /****** Default Analog Configuration for Poll NFC-B Rx 212 ******/
    , MODE_ENTRY_6_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCB | RFAL_ANALOG_CONFIG_BITRATE_212 | RFAL_ANALOG_CONFIG_RX)
                      , ST25R3916_REG_RX_CONF1,   0xFF, 0x02
                      , ST25R3916_REG_RX_CONF2,   0xFF, 0x3D
                      , ST25R3916_REG_RX_CONF3,   0xFF, 0x00
                      , ST25R3916_REG_RX_CONF4,   0xFF, 0x00
                      , ST25R3916_REG_CORR_CONF1, 0xFF, 0x14
                      , ST25R3916_REG_CORR_CONF2, 0xFF, 0x00
                      )

    /****** Default Analog Configuration for Poll NFC-B Rx 424 ******/
    , MODE_ENTRY_6_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCB | RFAL_ANALOG_CONFIG_BITRATE_424 | RFAL_ANALOG_CONFIG_RX)
                      , ST25R3916_REG_RX_CONF1, 0xFF, 0x42
                      , ST25R3916_REG_RX_CONF2, 0xFF, 0x3D
                      , ST25R3916_REG_RX_CONF3, 0xFF, 0x00
                      , ST25R3916_REG_RX_CONF4, 0xFF, 0x00
                      , ST25R3916_REG_CORR_CONF1, 0xFF, 0x54
                      , ST25R3916_REG_CORR_CONF2, 0xFF, 0x00
                      )

    /****** Default Analog Configuration for Poll NFC-B Rx 848 ******/
    , MODE_ENTRY_6_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCB | RFAL_ANALOG_CONFIG_BITRATE_848 | RFAL_ANALOG_CONFIG_RX)
                      , ST25R3916_REG_RX_CONF1,   0xFF, 0x42
                      , ST25R3916_REG_RX_CONF2,   0xFF, 0x3D
                      , ST25R3916_REG_RX_CONF3,   0xFF, 0x00
                      , ST25R3916_REG_RX_CONF4,   0xFF, 0x00
                      , ST25R3916_REG_CORR_CONF1, 0xFF, 0x44
                      , ST25R3916_REG_CORR_CONF2, 0xFF, 0x00
                      )    
#ifdef RFAL_USE_COHE

    /****** Default Analog Configuration for Poll NFC-F Rx Common ******/
    , MODE_ENTRY_7_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCF | RFAL_ANALOG_CONFIG_BITRATE_COMMON | RFAL_ANALOG_CONFIG_RX)
                      , ST25R3916_REG_AUX,  ST25R3916_REG_AUX_dis_corr, ST25R3916_REG_AUX_dis_corr_coherent      /* Use Pulse Receiver */
                      , ST25R3916_REG_RX_CONF1, 0xFF, 0x13
                      , ST25R3916_REG_RX_CONF2, 0xFF, 0x3D
                      , ST25R3916_REG_RX_CONF3, 0xFF, 0x00
                      , ST25R3916_REG_RX_CONF4, 0xFF, 0x00
                      , ST25R3916_REG_CORR_CONF1, 0xFF, 0x54
                      , ST25R3916_REG_CORR_CONF2, 0xFF, 0x00
                      )
#else
    /****** Default Analog Configuration for Poll NFC-F Rx Common ******/
    , MODE_ENTRY_7_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCF | RFAL_ANALOG_CONFIG_BITRATE_COMMON | RFAL_ANALOG_CONFIG_RX)
                      , ST25R3916_REG_AUX,  ST25R3916_REG_AUX_dis_corr, ST25R3916_REG_AUX_dis_corr_correlator                                   /* Use Correlator Receiver */
                      , ST25R3916_REG_RX_CONF1,   0xFF, 0x13
                      , ST25R3916_REG_RX_CONF2,   0xFF, 0x3D
                      , ST25R3916_REG_RX_CONF3,   0xFF, 0x00
                      , ST25R3916_REG_RX_CONF4,   0xFF, 0x00
                      , ST25R3916_REG_CORR_CONF1, 0xFF, 0x54
                      , ST25R3916_REG_CORR_CONF2, 0xFF, 0x00
                      )
#endif /*RFAL_USE_COHE*/


    , MODE_ENTRY_1_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCV | RFAL_ANALOG_CONFIG_BITRATE_1OF4 | RFAL_ANALOG_CONFIG_TX)
                      , ST25R3916_REG_MODE, ST25R3916_REG_MODE_tr_am, ST25R3916_REG_MODE_tr_am_ook                                              /* Use OOK */
                      )


#ifdef RFAL_USE_COHE
    /****** Default Analog Configuration for Poll NFC-V Rx Common ******/
    , MODE_ENTRY_7_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCV | RFAL_ANALOG_CONFIG_BITRATE_COMMON | RFAL_ANALOG_CONFIG_RX)
                      , ST25R3916_REG_AUX,  ST25R3916_REG_AUX_dis_corr, ST25R3916_REG_AUX_dis_corr_coherent                                     /* Use Pulse Receiver */
                      , ST25R3916_REG_RX_CONF1,   0xFF, 0x13
                      , ST25R3916_REG_RX_CONF2,   0xFF, 0x2D
                      , ST25R3916_REG_RX_CONF3,   0xFF, 0x00
                      , ST25R3916_REG_RX_CONF4,   0xFF, 0x00
                      , ST25R3916_REG_CORR_CONF1, 0xFF, 0x13
                      , ST25R3916_REG_CORR_CONF2, 0xFF, 0x01
                      )
#else
    /****** Default Analog Configuration for Poll NFC-V Rx Common ******/
    , MODE_ENTRY_7_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCV | RFAL_ANALOG_CONFIG_BITRATE_COMMON | RFAL_ANALOG_CONFIG_RX)
                      , ST25R3916_REG_AUX,  ST25R3916_REG_AUX_dis_corr, ST25R3916_REG_AUX_dis_corr_correlator                                   /* Use Correlator Receiver */
                      , ST25R3916_REG_RX_CONF1,   0xFF, 0x13
                      , ST25R3916_REG_RX_CONF2,   0xFF, 0x2D
                      , ST25R3916_REG_RX_CONF3,   0xFF, 0x00
                      , ST25R3916_REG_RX_CONF4,   0xFF, 0x00
                      , ST25R3916_REG_CORR_CONF1, 0xFF, 0x13
                      , ST25R3916_REG_CORR_CONF2, 0xFF, 0x01
                      )
#endif /*RFAL_USE_COHE*/

                      
    /****** Default Analog Configuration for Poll AP2P Tx 106 ******/
    , MODE_ENTRY_5_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_AP2P | RFAL_ANALOG_CONFIG_BITRATE_106 | RFAL_ANALOG_CONFIG_TX)
                      , ST25R3916_REG_MODE, ST25R3916_REG_MODE_tr_am , ST25R3916_REG_MODE_tr_am_ook                                             /* Use OOK modulation */
                      , ST25R3916_REG_OVERSHOOT_CONF1,  0xFF, 0x40                                                                              /* Set default Overshoot Protection  */
                      , ST25R3916_REG_OVERSHOOT_CONF2,  0xFF, 0x03                                                                              /* Set default Overshoot Protection  */
                      , ST25R3916_REG_UNDERSHOOT_CONF1, 0xFF, 0x40                                                                              /* Set default Undershoot Protection */
                      , ST25R3916_REG_UNDERSHOOT_CONF2, 0xFF, 0x03                                                                              /* Set default Undershoot Protection */
                      )

    /****** Default Analog Configuration for Poll AP2P Tx 212 ******/    
    , MODE_ENTRY_1_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_AP2P | RFAL_ANALOG_CONFIG_BITRATE_212 | RFAL_ANALOG_CONFIG_TX)
                      , ST25R3916_REG_MODE, ST25R3916_REG_MODE_tr_am , ST25R3916_REG_MODE_tr_am_am                                              /* Use AM modulation */
                      )
                                                                                                                                                
    /****** Default Analog Configuration for Poll AP2P Tx 424 ******/                                                                           
    , MODE_ENTRY_1_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_AP2P | RFAL_ANALOG_CONFIG_BITRATE_424 | RFAL_ANALOG_CONFIG_TX)       
                      , ST25R3916_REG_MODE, ST25R3916_REG_MODE_tr_am , ST25R3916_REG_MODE_tr_am_am                                              /* Use AM modulation */
                      )
                                                                                                                                                
                                                                                                                                                
    /****** Default Analog Configuration for Chip-Specific Listen On ******/
    , MODE_ENTRY_6_REG( (RFAL_ANALOG_CONFIG_TECH_CHIP | RFAL_ANALOG_CONFIG_CHIP_LISTEN_ON)
                      , ST25R3916_REG_ANT_TUNE_A, 0xFF, 0x00                                                                                    /* Set Antenna Tuning (Listener): ANTL */
                      , ST25R3916_REG_ANT_TUNE_B, 0xFF, 0xff                                                                                    /* Set Antenna Tuning (Listener): ANTL */
                      , ST25R3916_REG_OVERSHOOT_CONF1,  0xFF, 0x00                                                                              /* Disable Overshoot Protection  */
                      , ST25R3916_REG_OVERSHOOT_CONF2,  0xFF, 0x00                                                                              /* Disable Overshoot Protection  */
                      , ST25R3916_REG_UNDERSHOOT_CONF1, 0xFF, 0x00                                                                              /* Disable Undershoot Protection */
                      , ST25R3916_REG_UNDERSHOOT_CONF2, 0xFF, 0x00                                                                              /* Disable Undershoot Protection */
                      )
                                                                                                                                                
                                                                                                                                                
    /****** Default Analog Configuration for Listen AP2P Tx Common ******/
    , MODE_ENTRY_7_REG( (RFAL_ANALOG_CONFIG_LISTEN | RFAL_ANALOG_CONFIG_TECH_AP2P | RFAL_ANALOG_CONFIG_BITRATE_COMMON | RFAL_ANALOG_CONFIG_TX)
                      , ST25R3916_REG_ANT_TUNE_A, 0xFF, 0x82                                                                                    /* Set Antenna Tuning (Poller): ANTL */
                      , ST25R3916_REG_ANT_TUNE_B, 0xFF, 0x82                                                                                    /* Set Antenna Tuning (Poller): ANTL */
                      , ST25R3916_REG_TX_DRIVER, ST25R3916_REG_TX_DRIVER_am_mod_mask, ST25R3916_REG_TX_DRIVER_am_mod_12percent                  /* Set Modulation index */
                      , ST25R3916_REG_OVERSHOOT_CONF1,  0xFF, 0x00                                                                              /* Disable Overshoot Protection  */
                      , ST25R3916_REG_OVERSHOOT_CONF2,  0xFF, 0x00                                                                              /* Disable Overshoot Protection  */
                      , ST25R3916_REG_UNDERSHOOT_CONF1, 0xFF, 0x00                                                                              /* Disable Undershoot Protection */
                      , ST25R3916_REG_UNDERSHOOT_CONF2, 0xFF, 0x00                                                                              /* Disable Undershoot Protection */
                      )
                                                                                                                                                
                                                                                                                                                
    /****** Default Analog Configuration for Listen AP2P Rx Common ******/
    , MODE_ENTRY_3_REG( (RFAL_ANALOG_CONFIG_LISTEN | RFAL_ANALOG_CONFIG_TECH_AP2P | RFAL_ANALOG_CONFIG_BITRATE_COMMON | RFAL_ANALOG_CONFIG_RX)
                      , ST25R3916_REG_RX_CONF1, ST25R3916_REG_RX_CONF1_lp_mask, ST25R3916_REG_RX_CONF1_lp_1200khz                               /* Set Rx filter configuration */
                      , ST25R3916_REG_RX_CONF1, ST25R3916_REG_RX_CONF1_hz_mask, ST25R3916_REG_RX_CONF1_hz_12_200khz                             /* Set Rx filter configuration */
                      , ST25R3916_REG_RX_CONF2, ST25R3916_REG_RX_CONF2_amd_sel, ST25R3916_REG_RX_CONF2_amd_sel_mixer                            /* AM demodulator: mixer */
                      )
                                                                                                                                                
    /****** Default Analog Configuration for Listen AP2P Tx 106 ******/
    , MODE_ENTRY_5_REG( (RFAL_ANALOG_CONFIG_LISTEN | RFAL_ANALOG_CONFIG_TECH_AP2P | RFAL_ANALOG_CONFIG_BITRATE_106 | RFAL_ANALOG_CONFIG_TX)
                      , ST25R3916_REG_MODE, ST25R3916_REG_MODE_tr_am , ST25R3916_REG_MODE_tr_am_ook                                             /* Use OOK modulation */
                      , ST25R3916_REG_OVERSHOOT_CONF1,  0xFF, 0x40                                                                              /* Set default Overshoot Protection  */
                      , ST25R3916_REG_OVERSHOOT_CONF2,  0xFF, 0x03                                                                              /* Set default Overshoot Protection  */
                      , ST25R3916_REG_UNDERSHOOT_CONF1, 0xFF, 0x40                                                                              /* Set default Undershoot Protection */
                      , ST25R3916_REG_UNDERSHOOT_CONF2, 0xFF, 0x03                                                                              /* Set default Undershoot Protection */
                      )
                                                                                                                                                
    /****** Default Analog Configuration for Listen AP2P Tx 212 ******/
    , MODE_ENTRY_1_REG( (RFAL_ANALOG_CONFIG_LISTEN | RFAL_ANALOG_CONFIG_TECH_AP2P | RFAL_ANALOG_CONFIG_BITRATE_212 | RFAL_ANALOG_CONFIG_TX)
                     , ST25R3916_REG_MODE, ST25R3916_REG_MODE_tr_am , ST25R3916_REG_MODE_tr_am_am                                               /* Use AM modulation */
                     )
                                                                                                                                                
    /****** Default Analog Configuration for Listen AP2P Tx 424 ******/
    , MODE_ENTRY_1_REG( (RFAL_ANALOG_CONFIG_LISTEN | RFAL_ANALOG_CONFIG_TECH_AP2P | RFAL_ANALOG_CONFIG_BITRATE_424 | RFAL_ANALOG_CONFIG_TX)
                     , ST25R3916_REG_MODE, ST25R3916_REG_MODE_tr_am , ST25R3916_REG_MODE_tr_am_am                                               /* Use AM modulation */
                     )

};

const uint16_t rfalAnalogConfigCustomSettingsLength = sizeof(rfalAnalogConfigCustomSettings);