import logging import os import typing from flipper.utils.programmer import Programmer from flipper.utils.openocd import OpenOCD from flipper.utils.stm32wb55 import STM32WB55 from flipper.assets.obdata import OptionBytesData class OpenOCDProgrammer(Programmer): def __init__( self, interface: str = "interface/cmsis-dap.cfg", port_base: typing.Union[int, None] = None, serial: typing.Union[str, None] = None, ): super().__init__() config = {} config["interface"] = interface config["target"] = "target/stm32wbx.cfg" if not serial is None: if interface == "interface/cmsis-dap.cfg": config["serial"] = f"cmsis_dap_serial {serial}" elif "stlink" in interface: config["serial"] = f"stlink_serial {serial}" if not port_base is None: config["port_base"] = port_base self.openocd = OpenOCD(config) self.logger = logging.getLogger() def reset(self, mode: Programmer.RunMode = Programmer.RunMode.Run) -> bool: stm32 = STM32WB55() if mode == Programmer.RunMode.Run: stm32.reset(self.openocd, stm32.RunMode.Run) elif mode == Programmer.RunMode.Stop: stm32.reset(self.openocd, stm32.RunMode.Init) else: raise Exception("Unknown mode") return True def flash(self, address: int, file_path: str, verify: bool = True) -> bool: if not os.path.exists(file_path): raise Exception(f"File {file_path} not found") self.openocd.start() self.openocd.send_tcl(f"init") self.openocd.send_tcl( f"program {file_path} 0x{address:08x}{' verify' if verify else ''} reset exit" ) self.openocd.stop() return True def _ob_print_diff_table(self, ob_reference: bytes, ob_read: bytes, print_fn): print_fn( f'{"Reference": <20} {"Device": <20} {"Diff Reference": <20} {"Diff Device": <20}' ) # Split into 8 byte, word + word for i in range(0, len(ob_reference), 8): ref = ob_reference[i : i + 8] read = ob_read[i : i + 8] diff_str1 = "" diff_str2 = "" for j in range(0, len(ref.hex()), 2): byte_str_1 = ref.hex()[j : j + 2] byte_str_2 = read.hex()[j : j + 2] if byte_str_1 == byte_str_2: diff_str1 += "__" diff_str2 += "__" else: diff_str1 += byte_str_1 diff_str2 += byte_str_2 print_fn( f"{ref.hex(): <20} {read.hex(): <20} {diff_str1: <20} {diff_str2: <20}" ) def option_bytes_validate(self, file_path: str) -> bool: # Registers stm32 = STM32WB55() # OpenOCD self.openocd.start() stm32.reset(self.openocd, stm32.RunMode.Init) # Generate Option Bytes data ob_data = OptionBytesData(file_path) ob_values = ob_data.gen_values().export() ob_reference = ob_values.reference ob_compare_mask = ob_values.compare_mask ob_length = len(ob_reference) ob_words = int(ob_length / 4) # Read Option Bytes ob_read = bytes() for i in range(ob_words): addr = stm32.OPTION_BYTE_BASE + i * 4 value = self.openocd.read_32(addr) ob_read += value.to_bytes(4, "little") # Compare Option Bytes with reference by mask ob_compare = bytes() for i in range(ob_length): ob_compare += bytes([ob_read[i] & ob_compare_mask[i]]) # Compare Option Bytes return_code = False if ob_reference == ob_compare: self.logger.info("Option Bytes are valid") return_code = True else: self.logger.error("Option Bytes are invalid") self._ob_print_diff_table(ob_reference, ob_compare, self.logger.error) # Stop OpenOCD stm32.reset(self.openocd, stm32.RunMode.Run) self.openocd.stop() return return_code def _unpack_u32(self, data: bytes, offset: int): return int.from_bytes(data[offset : offset + 4], "little") def option_bytes_set(self, file_path: str) -> bool: # Registers stm32 = STM32WB55() # OpenOCD self.openocd.start() stm32.reset(self.openocd, stm32.RunMode.Init) # Generate Option Bytes data ob_data = OptionBytesData(file_path) ob_values = ob_data.gen_values().export() ob_reference_bytes = ob_values.reference ob_compare_mask_bytes = ob_values.compare_mask ob_write_mask_bytes = ob_values.write_mask ob_length = len(ob_reference_bytes) ob_dwords = int(ob_length / 8) # Clear flash errors stm32.clear_flash_errors(self.openocd) # Unlock Flash and Option Bytes stm32.flash_unlock(self.openocd) stm32.option_bytes_unlock(self.openocd) ob_need_to_apply = False for i in range(ob_dwords): device_addr = stm32.OPTION_BYTE_BASE + i * 8 device_value = self.openocd.read_32(device_addr) ob_write_mask = self._unpack_u32(ob_write_mask_bytes, i * 8) ob_compare_mask = self._unpack_u32(ob_compare_mask_bytes, i * 8) ob_value_ref = self._unpack_u32(ob_reference_bytes, i * 8) ob_value_masked = device_value & ob_compare_mask need_patch = ((ob_value_masked ^ ob_value_ref) & ob_write_mask) != 0 if need_patch: ob_need_to_apply = True self.logger.info( f"Need to patch: {device_addr:08X}: {ob_value_masked:08X} != {ob_value_ref:08X}, REG[{i}]" ) # Check if this option byte (dword) is mapped to a register device_reg_addr = stm32.option_bytes_id_to_address(i) # Construct new value for the OB register ob_value = device_value & (~ob_write_mask) ob_value |= ob_value_ref & ob_write_mask self.logger.info(f"Writing {ob_value:08X} to {device_reg_addr:08X}") self.openocd.write_32(device_reg_addr, ob_value) if ob_need_to_apply: stm32.option_bytes_apply(self.openocd) else: self.logger.info(f"Option Bytes are already correct") # Load Option Bytes # That will reset and also lock the Option Bytes and the Flash stm32.option_bytes_load(self.openocd) # Stop OpenOCD stm32.reset(self.openocd, stm32.RunMode.Run) self.openocd.stop() return True def otp_write(self, address: int, file_path: str) -> bool: # Open file, check that it aligned to 8 bytes with open(file_path, "rb") as f: data = f.read() if len(data) % 8 != 0: self.logger.error(f"File {file_path} is not aligned to 8 bytes") return False # Check that address is aligned to 8 bytes if address % 8 != 0: self.logger.error(f"Address {address} is not aligned to 8 bytes") return False # Get size of data data_size = len(data) # Check that data size is aligned to 8 bytes if data_size % 8 != 0: self.logger.error(f"Data size {data_size} is not aligned to 8 bytes") return False self.logger.debug(f"Writing {data_size} bytes to OTP at {address:08X}") self.logger.debug(f"Data: {data.hex().upper()}") # Start OpenOCD oocd = self.openocd oocd.start() # Registers stm32 = STM32WB55() try: # Check that OTP is empty for the given address # Also check that data is already written already_written = True for i in range(0, data_size, 4): file_word = int.from_bytes(data[i : i + 4], "little") device_word = oocd.read_32(address + i) if device_word != 0xFFFFFFFF and device_word != file_word: self.logger.error( f"OTP memory at {address + i:08X} is not empty: {device_word:08X}" ) raise Exception("OTP memory is not empty") if device_word != file_word: already_written = False if already_written: self.logger.info(f"OTP memory is already written with the given data") return True self.reset(self.RunMode.Stop) stm32.clear_flash_errors(oocd) # Write OTP memory by 8 bytes for i in range(0, data_size, 8): word_1 = int.from_bytes(data[i : i + 4], "little") word_2 = int.from_bytes(data[i + 4 : i + 8], "little") self.logger.debug( f"Writing {word_1:08X} {word_2:08X} to {address + i:08X}" ) stm32.write_flash_64(oocd, address + i, word_1, word_2) # Validate OTP memory validation_result = True for i in range(0, data_size, 4): file_word = int.from_bytes(data[i : i + 4], "little") device_word = oocd.read_32(address + i) if file_word != device_word: self.logger.error( f"Validation failed: {file_word:08X} != {device_word:08X} at {address + i:08X}" ) validation_result = False finally: # Stop OpenOCD stm32.reset(oocd, stm32.RunMode.Run) oocd.stop() return validation_result