## Local target

* APP_TEST
    * `docker-compose exec dev make -C firmware TARGET=local APP_TEST=1 clean`
    * `docker-compose exec dev make -C firmware TARGET=local APP_TEST=1 run`
    * check tests pass/fail (by exitcode == 0)

* APP_EXAMPLE_BLINK
    * `docker-compose exec dev make -C firmware TARGET=local APP_EXAMPLE_BLINK=1 run`
    * GPIO on and off

* APP_EXAMPLE_UART_WRITE
    * `docker-compose exec dev make -C firmware TARGET=local APP_EXAMPLE_UART_WRITE=1 run`
    * GPIO on/off and `counter: %` writes

* APP_EXAMPLE_IPC
    * `docker-compose exec dev make -C firmware TARGET=local APP_EXAMPLE_IPC=1 run`
    * ASCII display draw

* APP_EXAMPLE_INPUT_DUMP
    * `docker-compose exec dev make -C firmware TARGET=local APP_EXAMPLE_INPUT_DUMP=1 run` not implemented

* APP_EXAMPLE_QRCODE
    * `docker-compose exec dev make -C firmware TARGET=local APP_EXAMPLE_QRCODE=1 run`
    * Some writes to display

* APP_EXAMPLE_DISPLAY
    * `docker-compose exec dev make -C firmware TARGET=local APP_EXAMPLE_DISPLAY=1 run`
    * Some writes to display

* APP_EXAMPLE_FATFS
    * `docker-compose exec dev make -C firmware TARGET=local APP_EXAMPLE_FATFS=1 flash`
    * TODO: FatFs emulation and test not implemented

## F2 target

* APP_TEST
    * `docker-compose exec dev make -C firmware TARGET=f2 APP_TEST=1 clean`
    * `docker-compose exec dev make -C firmware TARGET=f2 APP_TEST=1 flash`
    * check UART for test pass/fail
    * blue led when test is running
    * green led if test is passed
    * red led if test is failed

* APP_EXAMPLE_BLINK
    * `docker-compose exec dev make -C firmware TARGET=f2 APP_EXAMPLE_BLINK=1 flash`
    * Red LED blink (1s period)

* APP_EXAMPLE_UART_WRITE
    * `docker-compose exec dev make -C firmware TARGET=f2 APP_EXAMPLE_UART_WRITE=1 flash`
    * Red LED shortly blinking, `counter: %` writes to UART

* APP_EXAMPLE_IPC
    * `docker-compose exec dev make -C firmware TARGET=f2 APP_EXAMPLE_IPC=1 flash`
    * ASCII display draw in UART

* APP_EXAMPLE_INPUT_DUMP
    * `docker-compose exec dev make -C firmware TARGET=f2 APP_EXAMPLE_INPUT_DUMP=1 flash`
    * Press all buttons, `state` and `event` writes to UART

* APP_EXAMPLE_QRCODE
    * `docker-compose exec dev make -C firmware TARGET=f2 APP_EXAMPLE_QRCODE=1 flash`
    * QR code show on the screen

* APP_EXAMPLE_DISPLAY
    * `docker-compose exec dev make -C firmware TARGET=f2 APP_EXAMPLE_DISPLAY=1 flash`
    * `Hello world` show on the screen

* APP_EXAMPLE_FATFS
    * `docker-compose exec dev make -C firmware TARGET=f2 APP_EXAMPLE_FATFS=1 flash`
    * `Init sd card error` on the screen
    * Insert SD-card
    * Reboot
    * Show file list on the screen
    * Scroll by pressing up and down