/******************************************************************************
  * \attention
  *
  * <h2><center>&copy; COPYRIGHT 2020 STMicroelectronics</center></h2>
  *
  * Licensed under ST MYLIBERTY SOFTWARE LICENSE AGREEMENT (the "License");
  * You may not use this file except in compliance with the License.
  * You may obtain a copy of the License at:
  *
  *        www.st.com/myliberty
  *
  * Unless required by applicable law or agreed to in writing, software 
  * distributed under the License is distributed on an "AS IS" BASIS, 
  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied,
  * AND SPECIFICALLY DISCLAIMING THE IMPLIED WARRANTIES OF MERCHANTABILITY,
  * FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT.
  * See the License for the specific language governing permissions and
  * limitations under the License.
  *
******************************************************************************/

/*
 *      PROJECT:   ST25R391x firmware
 *      Revision: 
 *      LANGUAGE:  ISO C99
 */

/*! \file rfal_analogConfig.h
 *
 *  \author bkam
 *
 *  \brief ST25R3916 Analog Configuration Settings
 *  
 */

#ifndef ST25R3916_ANALOGCONFIG_H
#define ST25R3916_ANALOGCONFIG_H

/*
 ******************************************************************************
 * INCLUDES
 ******************************************************************************
 */
#include "rfal_analogConfig.h"
#include "st25r3916_com.h"


/*
 ******************************************************************************
 * DEFINES
 ******************************************************************************
 */

/*
 ******************************************************************************
 * GLOBAL MACROS
 ******************************************************************************
 */

/*! Macro for Configuration Setting with only one register-mask-value set: 
 *  - Configuration ID[2], Number of Register sets to follow[1], Register[2], Mask[1], Value[1] */
#define MODE_ENTRY_1_REG(MODE, R0, M0, V0)              \
    (uint8_t)((uint16_t)(MODE) >> 8U), (uint8_t)((MODE) & 0xFFU), 1, (uint8_t)((uint16_t)(R0) >> 8U), (uint8_t)((R0) & 0xFFU), (uint8_t)(M0), (uint8_t)(V0)

/*! Macro for Configuration Setting with only two register-mask-value sets: 
 *  - Configuration ID[2], Number of Register sets to follow[1], Register[2], Mask[1], Value[1], Register[2], Mask[1], Value[1] */
#define MODE_ENTRY_2_REG(MODE, R0, M0, V0, R1, M1, V1)  \
    (uint8_t)((uint16_t)(MODE) >> 8U), (uint8_t)((MODE) & 0xFFU), 2, (uint8_t)((uint16_t)(R0) >> 8U), (uint8_t)((R0) & 0xFFU), (uint8_t)(M0), (uint8_t)(V0) \
                                 , (uint8_t)((uint16_t)(R1) >> 8U), (uint8_t)((R1) & 0xFFU), (uint8_t)(M1), (uint8_t)(V1)

/*! Macro for Configuration Setting with only three register-mask-value sets: 
 *  - Configuration ID[2], Number of Register sets to follow[1], Register[2], Mask[1], Value[1], Register[2], Mask[1], Value[1], Register[2]... */
#define MODE_ENTRY_3_REG(MODE, R0, M0, V0, R1, M1, V1, R2, M2, V2)  \
    (uint8_t)((uint16_t)(MODE) >> 8U), (uint8_t)((MODE) & 0xFFU), 3, (uint8_t)((uint16_t)(R0) >> 8U), (uint8_t)((R0) & 0xFFU), (uint8_t)(M0), (uint8_t)(V0) \
                                 , (uint8_t)((uint16_t)(R1) >> 8U), (uint8_t)((R1) & 0xFFU), (uint8_t)(M1), (uint8_t)(V1) \
                                 , (uint8_t)((uint16_t)(R2) >> 8U), (uint8_t)((R2) & 0xFFU), (uint8_t)(M2), (uint8_t)(V2)

/*! Macro for Configuration Setting with only four register-mask-value sets: 
 *  - Configuration ID[2], Number of Register sets to follow[1], Register[2], Mask[1], Value[1], Register[2], Mask[1], Value[1], Register[2]... */
#define MODE_ENTRY_4_REG(MODE, R0, M0, V0, R1, M1, V1, R2, M2, V2, R3, M3, V3)  \
    (uint8_t)((uint16_t)(MODE) >> 8U), (uint8_t)((MODE) & 0xFFU), 4, (uint8_t)((uint16_t)(R0) >> 8U), (uint8_t)((R0) & 0xFFU), (uint8_t)(M0), (uint8_t)(V0) \
                                 , (uint8_t)((uint16_t)(R1) >> 8U), (uint8_t)((R1) & 0xFFU), (uint8_t)(M1), (uint8_t)(V1) \
                                 , (uint8_t)((uint16_t)(R2) >> 8U), (uint8_t)((R2) & 0xFFU), (uint8_t)(M2), (uint8_t)(V2) \
                                 , (uint8_t)((uint16_t)(R3) >> 8U), (uint8_t)((R3) & 0xFFU), (uint8_t)(M3), (uint8_t)(V3)

/*! Macro for Configuration Setting with only five register-mask-value sets: 
 *  - Configuration ID[2], Number of Register sets to follow[1], Register[2], Mask[1], Value[1], Register[2], Mask[1], Value[1], Register[2]... */
#define MODE_ENTRY_5_REG(MODE, R0, M0, V0, R1, M1, V1, R2, M2, V2, R3, M3, V3, R4, M4, V4)  \
    (uint8_t)((uint16_t)(MODE) >> 8U), (uint8_t)((MODE) & 0xFFU), 5, (uint8_t)((uint16_t)(R0) >> 8U), (uint8_t)((R0) & 0xFFU), (uint8_t)(M0), (uint8_t)(V0) \
                                 , (uint8_t)((uint16_t)(R1) >> 8U), (uint8_t)((R1) & 0xFFU), (uint8_t)(M1), (uint8_t)(V1) \
                                 , (uint8_t)((uint16_t)(R2) >> 8U), (uint8_t)((R2) & 0xFFU), (uint8_t)(M2), (uint8_t)(V2) \
                                 , (uint8_t)((uint16_t)(R3) >> 8U), (uint8_t)((R3) & 0xFFU), (uint8_t)(M3), (uint8_t)(V3) \
                                 , (uint8_t)((uint16_t)(R4) >> 8U), (uint8_t)((R4) & 0xFFU), (uint8_t)(M4), (uint8_t)(V4)

/*! Macro for Configuration Setting with only six register-mask-value sets: 
 *  - Configuration ID[2], Number of Register sets to follow[1], Register[2], Mask[1], Value[1], Register[2], Mask[1], Value[1], Register[2]... */
#define MODE_ENTRY_6_REG(MODE, R0, M0, V0, R1, M1, V1, R2, M2, V2, R3, M3, V3, R4, M4, V4, R5, M5, V5)  \
    (uint8_t)((uint16_t)(MODE) >> 8U), (uint8_t)((MODE) & 0xFFU), 6, (uint8_t)((uint16_t)(R0) >> 8U), (uint8_t)((R0) & 0xFFU), (uint8_t)(M0), (uint8_t)(V0) \
                                 , (uint8_t)((uint16_t)(R1) >> 8U), (uint8_t)((R1) & 0xFFU), (uint8_t)(M1), (uint8_t)(V1) \
                                 , (uint8_t)((uint16_t)(R2) >> 8U), (uint8_t)((R2) & 0xFFU), (uint8_t)(M2), (uint8_t)(V2) \
                                 , (uint8_t)((uint16_t)(R3) >> 8U), (uint8_t)((R3) & 0xFFU), (uint8_t)(M3), (uint8_t)(V3) \
                                 , (uint8_t)((uint16_t)(R4) >> 8U), (uint8_t)((R4) & 0xFFU), (uint8_t)(M4), (uint8_t)(V4) \
                                 , (uint8_t)((uint16_t)(R5) >> 8U), (uint8_t)((R5) & 0xFFU), (uint8_t)(M5), (uint8_t)(V5)
                                 
/*! Macro for Configuration Setting with only seven register-mask-value sets: 
 *  - Configuration ID[2], Number of Register sets to follow[1], Register[2], Mask[1], Value[1], Register[2], Mask[1], Value[1], Register[2]... */
#define MODE_ENTRY_7_REG(MODE, R0, M0, V0, R1, M1, V1, R2, M2, V2, R3, M3, V3, R4, M4, V4, R5, M5, V5, R6, M6, V6)  \
    (uint8_t)((uint16_t)(MODE) >> 8U), (uint8_t)((MODE) & 0xFFU), 7, (uint8_t)((uint16_t)(R0) >> 8U), (uint8_t)((R0) & 0xFFU), (uint8_t)(M0), (uint8_t)(V0) \
                                 , (uint8_t)((uint16_t)(R1) >> 8U), (uint8_t)((R1) & 0xFFU), (uint8_t)(M1), (uint8_t)(V1) \
                                 , (uint8_t)((uint16_t)(R2) >> 8U), (uint8_t)((R2) & 0xFFU), (uint8_t)(M2), (uint8_t)(V2) \
                                 , (uint8_t)((uint16_t)(R3) >> 8U), (uint8_t)((R3) & 0xFFU), (uint8_t)(M3), (uint8_t)(V3) \
                                 , (uint8_t)((uint16_t)(R4) >> 8U), (uint8_t)((R4) & 0xFFU), (uint8_t)(M4), (uint8_t)(V4) \
                                 , (uint8_t)((uint16_t)(R5) >> 8U), (uint8_t)((R5) & 0xFFU), (uint8_t)(M5), (uint8_t)(V5) \
                                 , (uint8_t)((uint16_t)(R6) >> 8U), (uint8_t)((R6) & 0xFFU), (uint8_t)(M6), (uint8_t)(V6)

/*! Macro for Configuration Setting with only eight register-mask-value sets: 
 *  - Configuration ID[2], Number of Register sets to follow[1], Register[2], Mask[1], Value[1], Register[2], Mask[1], Value[1], Register[2]... */
#define MODE_ENTRY_8_REG(MODE, R0, M0, V0, R1, M1, V1, R2, M2, V2, R3, M3, V3, R4, M4, V4, R5, M5, V5, R6, M6, V6, R7, M7, V7)  \
    (uint8_t)((uint16_t)(MODE) >> 8U), (uint8_t)((MODE) & 0xFFU), 8, (uint8_t)((uint16_t)(R0) >> 8U), (uint8_t)((R0) & 0xFFU), (uint8_t)(M0), (uint8_t)(V0) \
                                 , (uint8_t)((uint16_t)(R1) >> 8U), (uint8_t)((R1) & 0xFFU), (uint8_t)(M1), (uint8_t)(V1) \
                                 , (uint8_t)((uint16_t)(R2) >> 8U), (uint8_t)((R2) & 0xFFU), (uint8_t)(M2), (uint8_t)(V2) \
                                 , (uint8_t)((uint16_t)(R3) >> 8U), (uint8_t)((R3) & 0xFFU), (uint8_t)(M3), (uint8_t)(V3) \
                                 , (uint8_t)((uint16_t)(R4) >> 8U), (uint8_t)((R4) & 0xFFU), (uint8_t)(M4), (uint8_t)(V4) \
                                 , (uint8_t)((uint16_t)(R5) >> 8U), (uint8_t)((R5) & 0xFFU), (uint8_t)(M5), (uint8_t)(V5) \
                                 , (uint8_t)((uint16_t)(R6) >> 8U), (uint8_t)((R6) & 0xFFU), (uint8_t)(M6), (uint8_t)(V6) \
                                 , (uint8_t)((uint16_t)(R7) >> 8U), (uint8_t)((R7) & 0xFFU), (uint8_t)(M7), (uint8_t)(V7)

/*! Macro for Configuration Setting with only nine register-mask-value sets: 
 *  - Configuration ID[2], Number of Register sets to follow[1], Register[2], Mask[1], Value[1], Register[2], Mask[1], Value[1], Register[2]... */
#define MODE_ENTRY_9_REG(MODE, R0, M0, V0, R1, M1, V1, R2, M2, V2, R3, M3, V3, R4, M4, V4, R5, M5, V5, R6, M6, V6, R7, M7, V7, R8, M8, V8)  \
    (uint8_t)((uint16_t)(MODE) >> 8U), (uint8_t)((MODE) & 0xFFU), 9, (uint8_t)((uint16_t)(R0) >> 8U), (uint8_t)((R0) & 0xFFU), (uint8_t)(M0), (uint8_t)(V0) \
                                 , (uint8_t)((uint16_t)(R1) >> 8U), (uint8_t)((R1) & 0xFFU), (uint8_t)(M1), (uint8_t)(V1) \
                                 , (uint8_t)((uint16_t)(R2) >> 8U), (uint8_t)((R2) & 0xFFU), (uint8_t)(M2), (uint8_t)(V2) \
                                 , (uint8_t)((uint16_t)(R3) >> 8U), (uint8_t)((R3) & 0xFFU), (uint8_t)(M3), (uint8_t)(V3) \
                                 , (uint8_t)((uint16_t)(R4) >> 8U), (uint8_t)((R4) & 0xFFU), (uint8_t)(M4), (uint8_t)(V4) \
                                 , (uint8_t)((uint16_t)(R5) >> 8U), (uint8_t)((R5) & 0xFFU), (uint8_t)(M5), (uint8_t)(V5) \
                                 , (uint8_t)((uint16_t)(R6) >> 8U), (uint8_t)((R6) & 0xFFU), (uint8_t)(M6), (uint8_t)(V6) \
                                 , (uint8_t)((uint16_t)(R7) >> 8U), (uint8_t)((R7) & 0xFFU), (uint8_t)(M7), (uint8_t)(V7) \
                                 , (uint8_t)((uint16_t)(R8) >> 8U), (uint8_t)((R8) & 0xFFU), (uint8_t)(M8), (uint8_t)(V8)

/*! Macro for Configuration Setting with only ten register-mask-value sets: 
 *  - Configuration ID[2], Number of Register sets to follow[1], Register[2], Mask[1], Value[1], Register[2], Mask[1], Value[1], Register[2]... */
#define MODE_ENTRY_10_REG(MODE, R0, M0, V0, R1, M1, V1, R2, M2, V2, R3, M3, V3, R4, M4, V4, R5, M5, V5, R6, M6, V6, R7, M7, V7, R8, M8, V8, R9, M9, V9)  \
    (uint8_t)((uint16_t)(MODE) >> 8U), (uint8_t)((MODE) & 0xFFU),10, (uint8_t)((uint16_t)(R0) >> 8U), (uint8_t)((R0) & 0xFFU), (uint8_t)(M0), (uint8_t)(V0) \
                                 , (uint8_t)((uint16_t)(R1) >> 8U), (uint8_t)((R1) & 0xFFU), (uint8_t)(M1), (uint8_t)(V1) \
                                 , (uint8_t)((uint16_t)(R2) >> 8U), (uint8_t)((R2) & 0xFFU), (uint8_t)(M2), (uint8_t)(V2) \
                                 , (uint8_t)((uint16_t)(R3) >> 8U), (uint8_t)((R3) & 0xFFU), (uint8_t)(M3), (uint8_t)(V3) \
                                 , (uint8_t)((uint16_t)(R4) >> 8U), (uint8_t)((R4) & 0xFFU), (uint8_t)(M4), (uint8_t)(V4) \
                                 , (uint8_t)((uint16_t)(R5) >> 8U), (uint8_t)((R5) & 0xFFU), (uint8_t)(M5), (uint8_t)(V5) \
                                 , (uint8_t)((uint16_t)(R6) >> 8U), (uint8_t)((R6) & 0xFFU), (uint8_t)(M6), (uint8_t)(V6) \
                                 , (uint8_t)((uint16_t)(R7) >> 8U), (uint8_t)((R7) & 0xFFU), (uint8_t)(M7), (uint8_t)(V7) \
                                 , (uint8_t)((uint16_t)(R8) >> 8U), (uint8_t)((R8) & 0xFFU), (uint8_t)(M8), (uint8_t)(V8) \
                                 , (uint8_t)((uint16_t)(R9) >> 8U), (uint8_t)((R9) & 0xFFU), (uint8_t)(M9), (uint8_t)(V9)

/*! Macro for Configuration Setting with eleven register-mask-value sets: 
 *  - Configuration ID[2], Number of Register sets to follow[1], Register[2], Mask[1], Value[1], Register[2], Mask[1], Value[1], Register[2]... */
#define MODE_ENTRY_11_REG(MODE, R0, M0, V0, R1, M1, V1, R2, M2, V2, R3, M3, V3, R4, M4, V4, R5, M5, V5, R6, M6, V6, R7, M7, V7, R8, M8, V8, R9, M9, V9, R10, M10, V10)  \
    (uint8_t)((uint16_t)(MODE) >> 8U), (uint8_t)((MODE) & 0xFFU),11, (uint8_t)((uint16_t)(R0) >> 8U), (uint8_t)((R0) & 0xFFU), (uint8_t)(M0), (uint8_t)(V0) \
                                 , (uint8_t)((uint16_t)(R1) >> 8U), (uint8_t)((R1) & 0xFFU), (uint8_t)(M1), (uint8_t)(V1) \
                                 , (uint8_t)((uint16_t)(R2) >> 8U), (uint8_t)((R2) & 0xFFU), (uint8_t)(M2), (uint8_t)(V2) \
                                 , (uint8_t)((uint16_t)(R3) >> 8U), (uint8_t)((R3) & 0xFFU), (uint8_t)(M3), (uint8_t)(V3) \
                                 , (uint8_t)((uint16_t)(R4) >> 8U), (uint8_t)((R4) & 0xFFU), (uint8_t)(M4), (uint8_t)(V4) \
                                 , (uint8_t)((uint16_t)(R5) >> 8U), (uint8_t)((R5) & 0xFFU), (uint8_t)(M5), (uint8_t)(V5) \
                                 , (uint8_t)((uint16_t)(R6) >> 8U), (uint8_t)((R6) & 0xFFU), (uint8_t)(M6), (uint8_t)(V6) \
                                 , (uint8_t)((uint16_t)(R7) >> 8U), (uint8_t)((R7) & 0xFFU), (uint8_t)(M7), (uint8_t)(V7) \
                                 , (uint8_t)((uint16_t)(R8) >> 8U), (uint8_t)((R8) & 0xFFU), (uint8_t)(M8), (uint8_t)(V8) \
                                 , (uint8_t)((uint16_t)(R9) >> 8U), (uint8_t)((R9) & 0xFFU), (uint8_t)(M9), (uint8_t)(V9) \
                                 , (uint8_t)((uint16_t)(R10) >> 8U), (uint8_t)((R10) & 0xFFU), (uint8_t)(M10), (uint8_t)(V10)

/*! Macro for Configuration Setting with twelve register-mask-value sets: 
 *  - Configuration ID[2], Number of Register sets to follow[1], Register[2], Mask[1], Value[1], Register[2], Mask[1], Value[1], Register[2]... */
#define MODE_ENTRY_12_REG(MODE, R0, M0, V0, R1, M1, V1, R2, M2, V2, R3, M3, V3, R4, M4, V4, R5, M5, V5, R6, M6, V6, R7, M7, V7, R8, M8, V8, R9, M9, V9, R10, M10, V10, R11, M11, V11)  \
    (uint8_t)((uint16_t)(MODE) >> 8U), (uint8_t)((MODE) & 0xFFU),12, (uint8_t)((uint16_t)(R0) >> 8U), (uint8_t)((R0) & 0xFFU), (uint8_t)(M0), (uint8_t)(V0) \
                                 , (uint8_t)((uint16_t)(R1) >> 8U), (uint8_t)((R1) & 0xFFU), (uint8_t)(M1), (uint8_t)(V1) \
                                 , (uint8_t)((uint16_t)(R2) >> 8U), (uint8_t)((R2) & 0xFFU), (uint8_t)(M2), (uint8_t)(V2) \
                                 , (uint8_t)((uint16_t)(R3) >> 8U), (uint8_t)((R3) & 0xFFU), (uint8_t)(M3), (uint8_t)(V3) \
                                 , (uint8_t)((uint16_t)(R4) >> 8U), (uint8_t)((R4) & 0xFFU), (uint8_t)(M4), (uint8_t)(V4) \
                                 , (uint8_t)((uint16_t)(R5) >> 8U), (uint8_t)((R5) & 0xFFU), (uint8_t)(M5), (uint8_t)(V5) \
                                 , (uint8_t)((uint16_t)(R6) >> 8U), (uint8_t)((R6) & 0xFFU), (uint8_t)(M6), (uint8_t)(V6) \
                                 , (uint8_t)((uint16_t)(R7) >> 8U), (uint8_t)((R7) & 0xFFU), (uint8_t)(M7), (uint8_t)(V7) \
                                 , (uint8_t)((uint16_t)(R8) >> 8U), (uint8_t)((R8) & 0xFFU), (uint8_t)(M8), (uint8_t)(V8) \
                                 , (uint8_t)((uint16_t)(R9) >> 8U), (uint8_t)((R9) & 0xFFU), (uint8_t)(M9), (uint8_t)(V9) \
                                 , (uint8_t)((uint16_t)(R10) >> 8U), (uint8_t)((R10) & 0xFFU), (uint8_t)(M10), (uint8_t)(V10) \
                                 , (uint8_t)((uint16_t)(R11) >> 8U), (uint8_t)((R11) & 0xFFU), (uint8_t)(M11), (uint8_t)(V11)

/*! Macro for Configuration Setting with thirteen register-mask-value sets: 
 *  - Configuration ID[2], Number of Register sets to follow[1], Register[2], Mask[1], Value[1], Register[2], Mask[1], Value[1], Register[2]... */
#define MODE_ENTRY_13_REG(MODE, R0, M0, V0, R1, M1, V1, R2, M2, V2, R3, M3, V3, R4, M4, V4, R5, M5, V5, R6, M6, V6, R7, M7, V7, R8, M8, V8, R9, M9, V9, R10, M10, V10, R11, M11, V11, R12, M12, V12)  \
    (uint8_t)((uint16_t)(MODE) >> 8U), (uint8_t)((MODE) & 0xFFU),13, (uint8_t)((uint16_t)(R0) >> 8U), (uint8_t)((R0) & 0xFFU), (uint8_t)(M0), (uint8_t)(V0) \
                                 , (uint8_t)((uint16_t)(R1) >> 8U), (uint8_t)((R1) & 0xFFU), (uint8_t)(M1), (uint8_t)(V1) \
                                 , (uint8_t)((uint16_t)(R2) >> 8U), (uint8_t)((R2) & 0xFFU), (uint8_t)(M2), (uint8_t)(V2) \
                                 , (uint8_t)((uint16_t)(R3) >> 8U), (uint8_t)((R3) & 0xFFU), (uint8_t)(M3), (uint8_t)(V3) \
                                 , (uint8_t)((uint16_t)(R4) >> 8U), (uint8_t)((R4) & 0xFFU), (uint8_t)(M4), (uint8_t)(V4) \
                                 , (uint8_t)((uint16_t)(R5) >> 8U), (uint8_t)((R5) & 0xFFU), (uint8_t)(M5), (uint8_t)(V5) \
                                 , (uint8_t)((uint16_t)(R6) >> 8U), (uint8_t)((R6) & 0xFFU), (uint8_t)(M6), (uint8_t)(V6) \
                                 , (uint8_t)((uint16_t)(R7) >> 8U), (uint8_t)((R7) & 0xFFU), (uint8_t)(M7), (uint8_t)(V7) \
                                 , (uint8_t)((uint16_t)(R8) >> 8U), (uint8_t)((R8) & 0xFFU), (uint8_t)(M8), (uint8_t)(V8) \
                                 , (uint8_t)((uint16_t)(R9) >> 8U), (uint8_t)((R9) & 0xFFU), (uint8_t)(M9), (uint8_t)(V9) \
                                 , (uint8_t)((uint16_t)(R10) >> 8U), (uint8_t)((R10) & 0xFFU), (uint8_t)(M10), (uint8_t)(V10) \
                                 , (uint8_t)((uint16_t)(R11) >> 8U), (uint8_t)((R11) & 0xFFU), (uint8_t)(M11), (uint8_t)(V11) \
                                 , (uint8_t)((uint16_t)(R12) >> 8U), (uint8_t)((R12) & 0xFFU), (uint8_t)(M12), (uint8_t)(V12)

/*! Macro for Configuration Setting with fourteen register-mask-value sets:
 *  - Configuration ID[2], Number of Register sets to follow[1], Register[2], Mask[1], Value[1], Register[2], Mask[1], Value[1], Register[2]... */
#define MODE_ENTRY_14_REG(MODE, R0, M0, V0, R1, M1, V1, R2, M2, V2, R3, M3, V3, R4, M4, V4, R5, M5, V5, R6, M6, V6, R7, M7, V7, R8, M8, V8, R9, M9, V9, R10, M10, V10, R11, M11, V11, R12, M12, V12, R13, M13, V13, R14, M14, V14, R15, M15, V15)  \
    (uint8_t)((uint16_t)(MODE) >> 8), (uint8_t)((MODE) & 0xFFU),14, (uint8_t)((uint16_t)(R0) >> 8), (uint8_t)((R0) & 0xFFU), (uint8_t)(M0), (uint8_t)(V0) \
                                 , (uint8_t)((uint16_t)(R1) >> 8), (uint8_t)((R1) & 0xFFU), (uint8_t)(M1), (uint8_t)(V1) \
                                 , (uint8_t)((uint16_t)(R2) >> 8), (uint8_t)((R2) & 0xFFU), (uint8_t)(M2), (uint8_t)(V2) \
                                 , (uint8_t)((uint16_t)(R3) >> 8), (uint8_t)((R3) & 0xFFU), (uint8_t)(M3), (uint8_t)(V3) \
                                 , (uint8_t)((uint16_t)(R4) >> 8), (uint8_t)((R4) & 0xFFU), (uint8_t)(M4), (uint8_t)(V4) \
                                 , (uint8_t)((uint16_t)(R5) >> 8), (uint8_t)((R5) & 0xFFU), (uint8_t)(M5), (uint8_t)(V5) \
                                 , (uint8_t)((uint16_t)(R6) >> 8), (uint8_t)((R6) & 0xFFU), (uint8_t)(M6), (uint8_t)(V6) \
                                 , (uint8_t)((uint16_t)(R7) >> 8), (uint8_t)((R7) & 0xFFU), (uint8_t)(M7), (uint8_t)(V7) \
                                 , (uint8_t)((uint16_t)(R8) >> 8), (uint8_t)((R8) & 0xFFU), (uint8_t)(M8), (uint8_t)(V8) \
                                 , (uint8_t)((uint16_t)(R9) >> 8), (uint8_t)((R9) & 0xFFU), (uint8_t)(M9), (uint8_t)(V9) \
                                 , (uint8_t)((uint16_t)(R10) >> 8), (uint8_t)((R10) & 0xFFU), (uint8_t)(M10), (uint8_t)(V10) \
                                 , (uint8_t)((uint16_t)(R11) >> 8), (uint8_t)((R11) & 0xFFU), (uint8_t)(M11), (uint8_t)(V11) \
                                 , (uint8_t)((uint16_t)(R12) >> 8), (uint8_t)((R12) & 0xFFU), (uint8_t)(M12), (uint8_t)(V12) \
                                 , (uint8_t)((uint16_t)(R13) >> 8), (uint8_t)((R13) & 0xFFU), (uint8_t)(M13), (uint8_t)(V13)
                                 
/*! Macro for Configuration Setting with fifteen register-mask-value sets:
 *  - Configuration ID[2], Number of Register sets to follow[1], Register[2], Mask[1], Value[1], Register[2], Mask[1], Value[1], Register[2]... */
#define MODE_ENTRY_15_REG(MODE, R0, M0, V0, R1, M1, V1, R2, M2, V2, R3, M3, V3, R4, M4, V4, R5, M5, V5, R6, M6, V6, R7, M7, V7, R8, M8, V8, R9, M9, V9, R10, M10, V10, R11, M11, V11, R12, M12, V12, R13, M13, V13, R14, M14, V14, R15, M15, V15)  \
    (uint8_t)((uint16_t)(MODE) >> 8), (uint8_t)((MODE) & 0xFFU),15, (uint8_t)((uint16_t)(R0) >> 8), (uint8_t)((R0) & 0xFFU), (uint8_t)(M0), (uint8_t)(V0) \
                                 , (uint8_t)((uint16_t)(R1) >> 8), (uint8_t)((R1) & 0xFFU), (uint8_t)(M1), (uint8_t)(V1) \
                                 , (uint8_t)((uint16_t)(R2) >> 8), (uint8_t)((R2) & 0xFFU), (uint8_t)(M2), (uint8_t)(V2) \
                                 , (uint8_t)((uint16_t)(R3) >> 8), (uint8_t)((R3) & 0xFFU), (uint8_t)(M3), (uint8_t)(V3) \
                                 , (uint8_t)((uint16_t)(R4) >> 8), (uint8_t)((R4) & 0xFFU), (uint8_t)(M4), (uint8_t)(V4) \
                                 , (uint8_t)((uint16_t)(R5) >> 8), (uint8_t)((R5) & 0xFFU), (uint8_t)(M5), (uint8_t)(V5) \
                                 , (uint8_t)((uint16_t)(R6) >> 8), (uint8_t)((R6) & 0xFFU), (uint8_t)(M6), (uint8_t)(V6) \
                                 , (uint8_t)((uint16_t)(R7) >> 8), (uint8_t)((R7) & 0xFFU), (uint8_t)(M7), (uint8_t)(V7) \
                                 , (uint8_t)((uint16_t)(R8) >> 8), (uint8_t)((R8) & 0xFFU), (uint8_t)(M8), (uint8_t)(V8) \
                                 , (uint8_t)((uint16_t)(R9) >> 8), (uint8_t)((R9) & 0xFFU), (uint8_t)(M9), (uint8_t)(V9) \
                                 , (uint8_t)((uint16_t)(R10) >> 8), (uint8_t)((R10) & 0xFFU), (uint8_t)(M10), (uint8_t)(V10) \
                                 , (uint8_t)((uint16_t)(R11) >> 8), (uint8_t)((R11) & 0xFFU), (uint8_t)(M11), (uint8_t)(V11) \
                                 , (uint8_t)((uint16_t)(R12) >> 8), (uint8_t)((R12) & 0xFFU), (uint8_t)(M12), (uint8_t)(V12) \
                                 , (uint8_t)((uint16_t)(R13) >> 8), (uint8_t)((R13) & 0xFFU), (uint8_t)(M13), (uint8_t)(V13) \
                                 , (uint8_t)((uint16_t)(R14) >> 8), (uint8_t)((R14) & 0xFFU), (uint8_t)(M14), (uint8_t)(V14)

/*! Macro for Configuration Setting with sixteen register-mask-value sets:
 *  - Configuration ID[2], Number of Register sets to follow[1], Register[2], Mask[1], Value[1], Register[2], Mask[1], Value[1], Register[2]... */
#define MODE_ENTRY_16_REG(MODE, R0, M0, V0, R1, M1, V1, R2, M2, V2, R3, M3, V3, R4, M4, V4, R5, M5, V5, R6, M6, V6, R7, M7, V7, R8, M8, V8, R9, M9, V9, R10, M10, V10, R11, M11, V11, R12, M12, V12, R13, M13, V13, R14, M14, V14, R15, M15, V15)  \
    (uint8_t)((uint16_t)(MODE) >> 8), (uint8_t)((MODE) & 0xFFU),16, (uint8_t)((uint16_t)(R0) >> 8), (uint8_t)((R0) & 0xFFU), (uint8_t)(M0), (uint8_t)(V0) \
                                 , (uint8_t)((uint16_t)(R1) >> 8), (uint8_t)((R1) & 0xFFU), (uint8_t)(M1), (uint8_t)(V1) \
                                 , (uint8_t)((uint16_t)(R2) >> 8), (uint8_t)((R2) & 0xFFU), (uint8_t)(M2), (uint8_t)(V2) \
                                 , (uint8_t)((uint16_t)(R3) >> 8), (uint8_t)((R3) & 0xFFU), (uint8_t)(M3), (uint8_t)(V3) \
                                 , (uint8_t)((uint16_t)(R4) >> 8), (uint8_t)((R4) & 0xFFU), (uint8_t)(M4), (uint8_t)(V4) \
                                 , (uint8_t)((uint16_t)(R5) >> 8), (uint8_t)((R5) & 0xFFU), (uint8_t)(M5), (uint8_t)(V5) \
                                 , (uint8_t)((uint16_t)(R6) >> 8), (uint8_t)((R6) & 0xFFU), (uint8_t)(M6), (uint8_t)(V6) \
                                 , (uint8_t)((uint16_t)(R7) >> 8), (uint8_t)((R7) & 0xFFU), (uint8_t)(M7), (uint8_t)(V7) \
                                 , (uint8_t)((uint16_t)(R8) >> 8), (uint8_t)((R8) & 0xFFU), (uint8_t)(M8), (uint8_t)(V8) \
                                 , (uint8_t)((uint16_t)(R9) >> 8), (uint8_t)((R9) & 0xFFU), (uint8_t)(M9), (uint8_t)(V9) \
                                 , (uint8_t)((uint16_t)(R10) >> 8), (uint8_t)((R10) & 0xFFU), (uint8_t)(M10), (uint8_t)(V10) \
                                 , (uint8_t)((uint16_t)(R11) >> 8), (uint8_t)((R11) & 0xFFU), (uint8_t)(M11), (uint8_t)(V11) \
                                 , (uint8_t)((uint16_t)(R12) >> 8), (uint8_t)((R12) & 0xFFU), (uint8_t)(M12), (uint8_t)(V12) \
                                 , (uint8_t)((uint16_t)(R13) >> 8), (uint8_t)((R13) & 0xFFU), (uint8_t)(M13), (uint8_t)(V13) \
                                 , (uint8_t)((uint16_t)(R14) >> 8), (uint8_t)((R14) & 0xFFU), (uint8_t)(M14), (uint8_t)(V14) \
                                 , (uint8_t)((uint16_t)(R15) >> 8), (uint8_t)((R15) & 0xFFU), (uint8_t)(M15), (uint8_t)(V15)

/*! Macro for Configuration Setting with seventeen register-mask-value sets:
 *  - Configuration ID[2], Number of Register sets to follow[1], Register[2], Mask[1], Value[1], Register[2], Mask[1], Value[1], Register[2]... */
#define MODE_ENTRY_17_REG(MODE, R0, M0, V0, R1, M1, V1, R2, M2, V2, R3, M3, V3, R4, M4, V4, R5, M5, V5, R6, M6, V6, R7, M7, V7, R8, M8, V8, R9, M9, V9, R10, M10, V10, R11, M11, V11, R12, M12, V12, R13, M13, V13, R14, M14, V14, R15, M15, V15, R16, M16, V16)  \
    (uint8_t)((uint16_t)(MODE) >> 8), (uint8_t)((MODE) & 0xFFU),17, (uint8_t)((uint16_t)(R0) >> 8), (uint8_t)((R0) & 0xFFU), (uint8_t)(M0), (uint8_t)(V0) \
                                 , (uint8_t)((uint16_t)(R1) >> 8), (uint8_t)((R1) & 0xFFU), (uint8_t)(M1), (uint8_t)(V1) \
                                 , (uint8_t)((uint16_t)(R2) >> 8), (uint8_t)((R2) & 0xFFU), (uint8_t)(M2), (uint8_t)(V2) \
                                 , (uint8_t)((uint16_t)(R3) >> 8), (uint8_t)((R3) & 0xFFU), (uint8_t)(M3), (uint8_t)(V3) \
                                 , (uint8_t)((uint16_t)(R4) >> 8), (uint8_t)((R4) & 0xFFU), (uint8_t)(M4), (uint8_t)(V4) \
                                 , (uint8_t)((uint16_t)(R5) >> 8), (uint8_t)((R5) & 0xFFU), (uint8_t)(M5), (uint8_t)(V5) \
                                 , (uint8_t)((uint16_t)(R6) >> 8), (uint8_t)((R6) & 0xFFU), (uint8_t)(M6), (uint8_t)(V6) \
                                 , (uint8_t)((uint16_t)(R7) >> 8), (uint8_t)((R7) & 0xFFU), (uint8_t)(M7), (uint8_t)(V7) \
                                 , (uint8_t)((uint16_t)(R8) >> 8), (uint8_t)((R8) & 0xFFU), (uint8_t)(M8), (uint8_t)(V8) \
                                 , (uint8_t)((uint16_t)(R9) >> 8), (uint8_t)((R9) & 0xFFU), (uint8_t)(M9), (uint8_t)(V9) \
                                 , (uint8_t)((uint16_t)(R10) >> 8), (uint8_t)((R10) & 0xFFU), (uint8_t)(M10), (uint8_t)(V10) \
                                 , (uint8_t)((uint16_t)(R11) >> 8), (uint8_t)((R11) & 0xFFU), (uint8_t)(M11), (uint8_t)(V11) \
                                 , (uint8_t)((uint16_t)(R12) >> 8), (uint8_t)((R12) & 0xFFU), (uint8_t)(M12), (uint8_t)(V12) \
                                 , (uint8_t)((uint16_t)(R13) >> 8), (uint8_t)((R13) & 0xFFU), (uint8_t)(M13), (uint8_t)(V13) \
                                 , (uint8_t)((uint16_t)(R14) >> 8), (uint8_t)((R14) & 0xFFU), (uint8_t)(M14), (uint8_t)(V14) \
                                 , (uint8_t)((uint16_t)(R15) >> 8), (uint8_t)((R15) & 0xFFU), (uint8_t)(M15), (uint8_t)(V15) \
                                 , (uint8_t)((uint16_t)(R16) >> 8), (uint8_t)((R16) & 0xFFU), (uint8_t)(M16), (uint8_t)(V16)
/*
 ******************************************************************************
 * GLOBAL DATA TYPES
 ******************************************************************************
 */
/*  PRQA S 3406 1 # MISRA 8.6 - Externally generated table included by the library */   /*  PRQA S 1514 1 # MISRA 8.9 - Externally generated table included by the library */
const uint8_t rfalAnalogConfigDefaultSettings[] = {
    
    /****** Default Analog Configuration for Chip-Specific Reset ******/
    MODE_ENTRY_17_REG( (RFAL_ANALOG_CONFIG_TECH_CHIP | RFAL_ANALOG_CONFIG_CHIP_INIT)
                        , ST25R3916_REG_IO_CONF1, (ST25R3916_REG_IO_CONF1_out_cl_mask | ST25R3916_REG_IO_CONF1_lf_clk_off), 0x07                               /* Disable MCU_CLK */
                        , ST25R3916_REG_IO_CONF2, (ST25R3916_REG_IO_CONF2_miso_pd1 | ST25R3916_REG_IO_CONF2_miso_pd2 ), 0x18                                   /* SPI Pull downs */
                        , ST25R3916_REG_IO_CONF2,  ST25R3916_REG_IO_CONF2_aat_en, ST25R3916_REG_IO_CONF2_aat_en                                                /* Enable AAT */
                        , ST25R3916_REG_TX_DRIVER, ST25R3916_REG_TX_DRIVER_d_res_mask, 0x00                                                                    /* Set RFO resistance Active Tx */
                        , ST25R3916_REG_RES_AM_MOD, 0xFF, 0x80                                                                                                 /* Use minimum non-overlap */
                        , ST25R3916_REG_FIELD_THRESHOLD_ACTV,   ST25R3916_REG_FIELD_THRESHOLD_ACTV_trg_mask, ST25R3916_REG_FIELD_THRESHOLD_ACTV_trg_105mV      /* Lower activation threshold (higher than deactivation)*/
                        , ST25R3916_REG_FIELD_THRESHOLD_ACTV,   ST25R3916_REG_FIELD_THRESHOLD_ACTV_rfe_mask, ST25R3916_REG_FIELD_THRESHOLD_ACTV_rfe_105mV      /* Lower activation threshold (higher than deactivation)*/
                        , ST25R3916_REG_FIELD_THRESHOLD_DEACTV, ST25R3916_REG_FIELD_THRESHOLD_DEACTV_trg_mask, ST25R3916_REG_FIELD_THRESHOLD_DEACTV_trg_75mV   /* Lower deactivation threshold */
                        , ST25R3916_REG_FIELD_THRESHOLD_DEACTV, ST25R3916_REG_FIELD_THRESHOLD_DEACTV_rfe_mask, ST25R3916_REG_FIELD_THRESHOLD_DEACTV_rfe_75mV   /* Lower deactivation threshold */
                        , ST25R3916_REG_AUX_MOD, ST25R3916_REG_AUX_MOD_lm_ext, 0x00                                                                            /* Disable External Load Modulation */
                        , ST25R3916_REG_AUX_MOD, ST25R3916_REG_AUX_MOD_lm_dri, ST25R3916_REG_AUX_MOD_lm_dri                                                    /* Use internal Load Modulation */
                        , ST25R3916_REG_PASSIVE_TARGET, ST25R3916_REG_PASSIVE_TARGET_fdel_mask, (5U<<ST25R3916_REG_PASSIVE_TARGET_fdel_shift)                  /* Adjust the FDT to be aligned with the bitgrid  */
                        , ST25R3916_REG_PT_MOD, (ST25R3916_REG_PT_MOD_ptm_res_mask | ST25R3916_REG_PT_MOD_pt_res_mask), 0x5f                                   /* Reduce RFO resistance in Modulated state */
                        , ST25R3916_REG_EMD_SUP_CONF, ST25R3916_REG_EMD_SUP_CONF_rx_start_emv, ST25R3916_REG_EMD_SUP_CONF_rx_start_emv_on                      /* Enable start on first 4 bits */
                        , ST25R3916_REG_ANT_TUNE_A, 0xFF, 0x82                                                                                                 /* Set Antenna Tuning (Poller): ANTL */
                        , ST25R3916_REG_ANT_TUNE_B, 0xFF, 0x82                                                                                                 /* Set Antenna Tuning (Poller): ANTL */
                        , 0x84U, 0x10, 0x10                                                                                                                     /* Avoid chip internal overheat protection */
                        )
    
    /****** Default Analog Configuration for Chip-Specific Poll Common ******/
    , MODE_ENTRY_9_REG( (RFAL_ANALOG_CONFIG_TECH_CHIP | RFAL_ANALOG_CONFIG_CHIP_POLL_COMMON)
                        , ST25R3916_REG_MODE, ST25R3916_REG_MODE_tr_am  , ST25R3916_REG_MODE_tr_am_am                                           /* Use AM modulation */      
                        , ST25R3916_REG_TX_DRIVER, ST25R3916_REG_TX_DRIVER_am_mod_mask, ST25R3916_REG_TX_DRIVER_am_mod_12percent                /* Set Modulation index */
                        , ST25R3916_REG_AUX_MOD, (ST25R3916_REG_AUX_MOD_dis_reg_am | ST25R3916_REG_AUX_MOD_res_am), 0x00                           /* Use AM via regulator */
                        , ST25R3916_REG_ANT_TUNE_A, 0xFF, 0x82                                                                                  /* Set Antenna Tuning (Poller): ANTL */
                        , ST25R3916_REG_ANT_TUNE_B, 0xFF, 0x82                                                                                  /* Set Antenna Tuning (Poller): ANTL */
                        , ST25R3916_REG_OVERSHOOT_CONF1,  0xFF, 0x00                                                                            /* Disable Overshoot Protection  */
                        , ST25R3916_REG_OVERSHOOT_CONF2,  0xFF, 0x00                                                                            /* Disable Overshoot Protection  */
                        , ST25R3916_REG_UNDERSHOOT_CONF1, 0xFF, 0x00                                                                            /* Disable Undershoot Protection */
                        , ST25R3916_REG_UNDERSHOOT_CONF2, 0xFF, 0x00                                                                            /* Disable Undershoot Protection */
                        )

                      
    /****** Default Analog Configuration for Poll NFC-A Rx Common ******/
    , MODE_ENTRY_1_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCA | RFAL_ANALOG_CONFIG_BITRATE_COMMON | RFAL_ANALOG_CONFIG_RX)
                      , ST25R3916_REG_AUX,  ST25R3916_REG_AUX_dis_corr, ST25R3916_REG_AUX_dis_corr_correlator                                   /* Use Correlator Receiver */
                      )
                      
    /****** Default Analog Configuration for Poll NFC-A Tx 106 ******/
    , MODE_ENTRY_5_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCA | RFAL_ANALOG_CONFIG_BITRATE_106 | RFAL_ANALOG_CONFIG_TX)
                      , ST25R3916_REG_MODE, ST25R3916_REG_MODE_tr_am, ST25R3916_REG_MODE_tr_am_ook                                              /* Use OOK */
                      , ST25R3916_REG_OVERSHOOT_CONF1,  0xFF, 0x40                                                                              /* Set default Overshoot Protection */
                      , ST25R3916_REG_OVERSHOOT_CONF2,  0xFF, 0x03                                                                              /* Set default Overshoot Protection */
                      , ST25R3916_REG_UNDERSHOOT_CONF1, 0xFF, 0x40                                                                              /* Set default Undershoot Protection */
                      , ST25R3916_REG_UNDERSHOOT_CONF2, 0xFF, 0x03                                                                              /* Set default Undershoot Protection */
                      )
                      
    /****** Default Analog Configuration for Poll NFC-A Rx 106 ******/
    , MODE_ENTRY_6_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCA | RFAL_ANALOG_CONFIG_BITRATE_106 | RFAL_ANALOG_CONFIG_RX)
                      , ST25R3916_REG_RX_CONF1,   0xFF, 0x08
                      , ST25R3916_REG_RX_CONF2,   0xFF, 0x2D
                      , ST25R3916_REG_RX_CONF3,   0xFF, 0x00
                      , ST25R3916_REG_RX_CONF4,   0xFF, 0x00
                      , ST25R3916_REG_CORR_CONF1, 0xFF, 0x51
                      , ST25R3916_REG_CORR_CONF2, 0xFF, 0x00
                      )

    /****** Default Analog Configuration for Poll NFC-A Tx 212 ******/
    , MODE_ENTRY_7_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCA | RFAL_ANALOG_CONFIG_BITRATE_212 | RFAL_ANALOG_CONFIG_TX)
                      , ST25R3916_REG_MODE, ST25R3916_REG_MODE_tr_am  , ST25R3916_REG_MODE_tr_am_am                                             /* Use AM modulation */
                      , ST25R3916_REG_AUX_MOD, (ST25R3916_REG_AUX_MOD_dis_reg_am | ST25R3916_REG_AUX_MOD_res_am), 0x88                             /* Use Resistive AM */
                      , ST25R3916_REG_RES_AM_MOD, ST25R3916_REG_RES_AM_MOD_md_res_mask, 0x7F                                      /* Set Resistive modulation */
                      , ST25R3916_REG_OVERSHOOT_CONF1,  0xFF, 0x40                                                                              /* Set default Overshoot Protection  */
                      , ST25R3916_REG_OVERSHOOT_CONF2,  0xFF, 0x03                                                                              /* Set default Overshoot Protection  */
                      , ST25R3916_REG_UNDERSHOOT_CONF1, 0xFF, 0x40                                                                              /* Set default Undershoot Protection */
                      , ST25R3916_REG_UNDERSHOOT_CONF2, 0xFF, 0x03                                                                              /* Set default Undershoot Protection */
                      )
                      
    /****** Default Analog Configuration for Poll NFC-A Rx 212 ******/
    , MODE_ENTRY_6_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCA | RFAL_ANALOG_CONFIG_BITRATE_212 | RFAL_ANALOG_CONFIG_RX)
                      , ST25R3916_REG_RX_CONF1,   0xFF, 0x02
                      , ST25R3916_REG_RX_CONF2,   0xFF, 0x3D
                      , ST25R3916_REG_RX_CONF3,   0xFF, 0x00
                      , ST25R3916_REG_RX_CONF4,   0xFF, 0x00
                      , ST25R3916_REG_CORR_CONF1, 0xFF, 0x14
                      , ST25R3916_REG_CORR_CONF2, 0xFF, 0x00
                      )
                      
    /****** Default Analog Configuration for Poll NFC-A Tx 424 ******/                      
    , MODE_ENTRY_7_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCA | RFAL_ANALOG_CONFIG_BITRATE_424 | RFAL_ANALOG_CONFIG_TX)
                      , ST25R3916_REG_MODE, ST25R3916_REG_MODE_tr_am  , ST25R3916_REG_MODE_tr_am_am                                             /* Use AM modulation */
                      , ST25R3916_REG_AUX_MOD, (ST25R3916_REG_AUX_MOD_dis_reg_am | ST25R3916_REG_AUX_MOD_res_am), 0x88                             /* Use Resistive AM */
                      , ST25R3916_REG_RES_AM_MOD, ST25R3916_REG_RES_AM_MOD_md_res_mask, 0x7F                                                    /* Set Resistive modulation */
                      , ST25R3916_REG_OVERSHOOT_CONF1,  0xFF, 0x40                                                                              /* Set default Overshoot Protection  */
                      , ST25R3916_REG_OVERSHOOT_CONF2,  0xFF, 0x03                                                                              /* Set default Overshoot Protection  */
                      , ST25R3916_REG_UNDERSHOOT_CONF1, 0xFF, 0x40                                                                              /* Set default Undershoot Protection */
                      , ST25R3916_REG_UNDERSHOOT_CONF2, 0xFF, 0x03                                                                              /* Set default Undershoot Protection */
                      )

    /****** Default Analog Configuration for Poll NFC-A Rx 424 ******/
    , MODE_ENTRY_6_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCA | RFAL_ANALOG_CONFIG_BITRATE_424 | RFAL_ANALOG_CONFIG_RX)
                      , ST25R3916_REG_RX_CONF1,   0xFF, 0x42
                      , ST25R3916_REG_RX_CONF2,   0xFF, 0x3D
                      , ST25R3916_REG_RX_CONF3,   0xFF, 0x00
                      , ST25R3916_REG_RX_CONF4,   0xFF, 0x00
                      , ST25R3916_REG_CORR_CONF1, 0xFF, 0x54
                      , ST25R3916_REG_CORR_CONF2, 0xFF, 0x00
                      )

    /****** Default Analog Configuration for Poll NFC-A Tx 848 ******/
    , MODE_ENTRY_7_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCA | RFAL_ANALOG_CONFIG_BITRATE_848 | RFAL_ANALOG_CONFIG_TX)
                      , ST25R3916_REG_MODE, ST25R3916_REG_MODE_tr_am  , ST25R3916_REG_MODE_tr_am_am                                             /* Use AM modulation */
                      , ST25R3916_REG_TX_DRIVER, ST25R3916_REG_TX_DRIVER_am_mod_mask, ST25R3916_REG_TX_DRIVER_am_mod_40percent                  /* Set Modulation index */
                      , ST25R3916_REG_AUX_MOD, (ST25R3916_REG_AUX_MOD_dis_reg_am | ST25R3916_REG_AUX_MOD_res_am), 0x00                             /* Use AM via regulator */
                      , ST25R3916_REG_OVERSHOOT_CONF1,  0xFF, 0x00                                                                              /* Disable Overshoot Protection  */
                      , ST25R3916_REG_OVERSHOOT_CONF2,  0xFF, 0x00                                                                              /* Disable Overshoot Protection  */
                      , ST25R3916_REG_UNDERSHOOT_CONF1, 0xFF, 0x00                                                                              /* Disable Undershoot Protection */
                      , ST25R3916_REG_UNDERSHOOT_CONF2, 0xFF, 0x00                                                                              /* Disable Undershoot Protection */
                      )

    /****** Default Analog Configuration for Poll NFC-A Rx 848 ******/
    , MODE_ENTRY_6_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCA | RFAL_ANALOG_CONFIG_BITRATE_848 | RFAL_ANALOG_CONFIG_RX)
                      , ST25R3916_REG_RX_CONF1,   0xFF, 0x42
                      , ST25R3916_REG_RX_CONF2,   0xFF, 0x3D
                      , ST25R3916_REG_RX_CONF3,   0xFF, 0x00
                      , ST25R3916_REG_RX_CONF4,   0xFF, 0x00
                      , ST25R3916_REG_CORR_CONF1, 0xFF, 0x44
                      , ST25R3916_REG_CORR_CONF2, 0xFF, 0x00
                      )
                      
    /****** Default Analog Configuration for Poll NFC-A Anticolision setting ******/
    , MODE_ENTRY_1_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCA | RFAL_ANALOG_CONFIG_BITRATE_COMMON | RFAL_ANALOG_CONFIG_ANTICOL)
                      , ST25R3916_REG_CORR_CONF1, ST25R3916_REG_CORR_CONF1_corr_s6, 0x00                                                            /* Set collision detection level different from data */
                      )

#ifdef RFAL_USE_COHE
    /****** Default Analog Configuration for Poll NFC-B Rx Common ******/
    , MODE_ENTRY_1_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCB | RFAL_ANALOG_CONFIG_BITRATE_COMMON | RFAL_ANALOG_CONFIG_RX)
                      , ST25R3916_REG_AUX,  ST25R3916_REG_AUX_dis_corr, ST25R3916_REG_AUX_dis_corr_coherent                                     /* Use Coherent Receiver */
                      )
#else
    /****** Default Analog Configuration for Poll NFC-B Rx Common ******/
    , MODE_ENTRY_1_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCB | RFAL_ANALOG_CONFIG_BITRATE_COMMON | RFAL_ANALOG_CONFIG_RX)
                        , ST25R3916_REG_AUX,  ST25R3916_REG_AUX_dis_corr, ST25R3916_REG_AUX_dis_corr_correlator                                 /* Use Correlator Receiver */
                        )
#endif /*RFAL_USE_COHE*/

      /****** Default Analog Configuration for Poll NFC-B Rx 106 ******/
    , MODE_ENTRY_6_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCB | RFAL_ANALOG_CONFIG_BITRATE_106 | RFAL_ANALOG_CONFIG_RX)
                      , ST25R3916_REG_RX_CONF1,   0xFF, 0x04
                      , ST25R3916_REG_RX_CONF2,   0xFF, 0x3D
                      , ST25R3916_REG_RX_CONF3,   0xFF, 0x00
                      , ST25R3916_REG_RX_CONF4,   0xFF, 0x00
                      , ST25R3916_REG_CORR_CONF1, 0xFF, 0x1B
                      , ST25R3916_REG_CORR_CONF2, 0xFF, 0x00
                      )

    /****** Default Analog Configuration for Poll NFC-B Rx 212 ******/
    , MODE_ENTRY_6_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCB | RFAL_ANALOG_CONFIG_BITRATE_212 | RFAL_ANALOG_CONFIG_RX)
                      , ST25R3916_REG_RX_CONF1,   0xFF, 0x02
                      , ST25R3916_REG_RX_CONF2,   0xFF, 0x3D
                      , ST25R3916_REG_RX_CONF3,   0xFF, 0x00
                      , ST25R3916_REG_RX_CONF4,   0xFF, 0x00
                      , ST25R3916_REG_CORR_CONF1, 0xFF, 0x14
                      , ST25R3916_REG_CORR_CONF2, 0xFF, 0x00
                      )

    /****** Default Analog Configuration for Poll NFC-B Rx 424 ******/
    , MODE_ENTRY_6_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCB | RFAL_ANALOG_CONFIG_BITRATE_424 | RFAL_ANALOG_CONFIG_RX)
                      , ST25R3916_REG_RX_CONF1, 0xFF, 0x42
                      , ST25R3916_REG_RX_CONF2, 0xFF, 0x3D
                      , ST25R3916_REG_RX_CONF3, 0xFF, 0x00
                      , ST25R3916_REG_RX_CONF4, 0xFF, 0x00
                      , ST25R3916_REG_CORR_CONF1, 0xFF, 0x54
                      , ST25R3916_REG_CORR_CONF2, 0xFF, 0x00
                      )

    /****** Default Analog Configuration for Poll NFC-B Rx 848 ******/
    , MODE_ENTRY_6_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCB | RFAL_ANALOG_CONFIG_BITRATE_848 | RFAL_ANALOG_CONFIG_RX)
                      , ST25R3916_REG_RX_CONF1,   0xFF, 0x42
                      , ST25R3916_REG_RX_CONF2,   0xFF, 0x3D
                      , ST25R3916_REG_RX_CONF3,   0xFF, 0x00
                      , ST25R3916_REG_RX_CONF4,   0xFF, 0x00
                      , ST25R3916_REG_CORR_CONF1, 0xFF, 0x44
                      , ST25R3916_REG_CORR_CONF2, 0xFF, 0x00
                      )    
#ifdef RFAL_USE_COHE

    /****** Default Analog Configuration for Poll NFC-F Rx Common ******/
    , MODE_ENTRY_7_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCF | RFAL_ANALOG_CONFIG_BITRATE_COMMON | RFAL_ANALOG_CONFIG_RX)
                      , ST25R3916_REG_AUX,  ST25R3916_REG_AUX_dis_corr, ST25R3916_REG_AUX_dis_corr_coherent      /* Use Pulse Receiver */
                      , ST25R3916_REG_RX_CONF1, 0xFF, 0x13
                      , ST25R3916_REG_RX_CONF2, 0xFF, 0x3D
                      , ST25R3916_REG_RX_CONF3, 0xFF, 0x00
                      , ST25R3916_REG_RX_CONF4, 0xFF, 0x00
                      , ST25R3916_REG_CORR_CONF1, 0xFF, 0x54
                      , ST25R3916_REG_CORR_CONF2, 0xFF, 0x00
                      )
#else
    /****** Default Analog Configuration for Poll NFC-F Rx Common ******/
    , MODE_ENTRY_7_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCF | RFAL_ANALOG_CONFIG_BITRATE_COMMON | RFAL_ANALOG_CONFIG_RX)
                      , ST25R3916_REG_AUX,  ST25R3916_REG_AUX_dis_corr, ST25R3916_REG_AUX_dis_corr_correlator                                   /* Use Correlator Receiver */
                      , ST25R3916_REG_RX_CONF1,   0xFF, 0x13
                      , ST25R3916_REG_RX_CONF2,   0xFF, 0x3D
                      , ST25R3916_REG_RX_CONF3,   0xFF, 0x00
                      , ST25R3916_REG_RX_CONF4,   0xFF, 0x00
                      , ST25R3916_REG_CORR_CONF1, 0xFF, 0x54
                      , ST25R3916_REG_CORR_CONF2, 0xFF, 0x00
                      )
#endif /*RFAL_USE_COHE*/


    , MODE_ENTRY_1_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCV | RFAL_ANALOG_CONFIG_BITRATE_1OF4 | RFAL_ANALOG_CONFIG_TX)
                      , ST25R3916_REG_MODE, ST25R3916_REG_MODE_tr_am, ST25R3916_REG_MODE_tr_am_ook                                              /* Use OOK */
                      )


#ifdef RFAL_USE_COHE
    /****** Default Analog Configuration for Poll NFC-V Rx Common ******/
    , MODE_ENTRY_7_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCV | RFAL_ANALOG_CONFIG_BITRATE_COMMON | RFAL_ANALOG_CONFIG_RX)
                      , ST25R3916_REG_AUX,  ST25R3916_REG_AUX_dis_corr, ST25R3916_REG_AUX_dis_corr_coherent                                     /* Use Pulse Receiver */
                      , ST25R3916_REG_RX_CONF1,   0xFF, 0x13
                      , ST25R3916_REG_RX_CONF2,   0xFF, 0x2D
                      , ST25R3916_REG_RX_CONF3,   0xFF, 0x00
                      , ST25R3916_REG_RX_CONF4,   0xFF, 0x00
                      , ST25R3916_REG_CORR_CONF1, 0xFF, 0x13
                      , ST25R3916_REG_CORR_CONF2, 0xFF, 0x01
                      )
#else
    /****** Default Analog Configuration for Poll NFC-V Rx Common ******/
    , MODE_ENTRY_7_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_NFCV | RFAL_ANALOG_CONFIG_BITRATE_COMMON | RFAL_ANALOG_CONFIG_RX)
                      , ST25R3916_REG_AUX,  ST25R3916_REG_AUX_dis_corr, ST25R3916_REG_AUX_dis_corr_correlator                                   /* Use Correlator Receiver */
                      , ST25R3916_REG_RX_CONF1,   0xFF, 0x13
                      , ST25R3916_REG_RX_CONF2,   0xFF, 0x2D
                      , ST25R3916_REG_RX_CONF3,   0xFF, 0x00
                      , ST25R3916_REG_RX_CONF4,   0xFF, 0x00
                      , ST25R3916_REG_CORR_CONF1, 0xFF, 0x13
                      , ST25R3916_REG_CORR_CONF2, 0xFF, 0x01
                      )
#endif /*RFAL_USE_COHE*/

                      
    /****** Default Analog Configuration for Poll AP2P Tx 106 ******/
    , MODE_ENTRY_5_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_AP2P | RFAL_ANALOG_CONFIG_BITRATE_106 | RFAL_ANALOG_CONFIG_TX)
                      , ST25R3916_REG_MODE, ST25R3916_REG_MODE_tr_am , ST25R3916_REG_MODE_tr_am_ook                                             /* Use OOK modulation */
                      , ST25R3916_REG_OVERSHOOT_CONF1,  0xFF, 0x40                                                                              /* Set default Overshoot Protection  */
                      , ST25R3916_REG_OVERSHOOT_CONF2,  0xFF, 0x03                                                                              /* Set default Overshoot Protection  */
                      , ST25R3916_REG_UNDERSHOOT_CONF1, 0xFF, 0x40                                                                              /* Set default Undershoot Protection */
                      , ST25R3916_REG_UNDERSHOOT_CONF2, 0xFF, 0x03                                                                              /* Set default Undershoot Protection */
                      )

    /****** Default Analog Configuration for Poll AP2P Tx 212 ******/    
    , MODE_ENTRY_1_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_AP2P | RFAL_ANALOG_CONFIG_BITRATE_212 | RFAL_ANALOG_CONFIG_TX)
                      , ST25R3916_REG_MODE, ST25R3916_REG_MODE_tr_am , ST25R3916_REG_MODE_tr_am_am                                              /* Use AM modulation */
                      )
                                                                                                                                                
    /****** Default Analog Configuration for Poll AP2P Tx 424 ******/                                                                           
    , MODE_ENTRY_1_REG( (RFAL_ANALOG_CONFIG_POLL | RFAL_ANALOG_CONFIG_TECH_AP2P | RFAL_ANALOG_CONFIG_BITRATE_424 | RFAL_ANALOG_CONFIG_TX)       
                      , ST25R3916_REG_MODE, ST25R3916_REG_MODE_tr_am , ST25R3916_REG_MODE_tr_am_am                                              /* Use AM modulation */
                      )
                                                                                                                                                
                                                                                                                                                
    /****** Default Analog Configuration for Chip-Specific Listen On ******/
    , MODE_ENTRY_6_REG( (RFAL_ANALOG_CONFIG_TECH_CHIP | RFAL_ANALOG_CONFIG_CHIP_LISTEN_ON)
                      , ST25R3916_REG_ANT_TUNE_A, 0xFF, 0x00                                                                                    /* Set Antenna Tuning (Listener): ANTL */
                      , ST25R3916_REG_ANT_TUNE_B, 0xFF, 0xff                                                                                    /* Set Antenna Tuning (Listener): ANTL */
                      , ST25R3916_REG_OVERSHOOT_CONF1,  0xFF, 0x00                                                                              /* Disable Overshoot Protection  */
                      , ST25R3916_REG_OVERSHOOT_CONF2,  0xFF, 0x00                                                                              /* Disable Overshoot Protection  */
                      , ST25R3916_REG_UNDERSHOOT_CONF1, 0xFF, 0x00                                                                              /* Disable Undershoot Protection */
                      , ST25R3916_REG_UNDERSHOOT_CONF2, 0xFF, 0x00                                                                              /* Disable Undershoot Protection */
                      )
                                                                                                                                                
                                                                                                                                                
    /****** Default Analog Configuration for Listen AP2P Tx Common ******/
    , MODE_ENTRY_7_REG( (RFAL_ANALOG_CONFIG_LISTEN | RFAL_ANALOG_CONFIG_TECH_AP2P | RFAL_ANALOG_CONFIG_BITRATE_COMMON | RFAL_ANALOG_CONFIG_TX)
                      , ST25R3916_REG_ANT_TUNE_A, 0xFF, 0x82                                                                                    /* Set Antenna Tuning (Poller): ANTL */
                      , ST25R3916_REG_ANT_TUNE_B, 0xFF, 0x82                                                                                    /* Set Antenna Tuning (Poller): ANTL */
                      , ST25R3916_REG_TX_DRIVER, ST25R3916_REG_TX_DRIVER_am_mod_mask, ST25R3916_REG_TX_DRIVER_am_mod_12percent                  /* Set Modulation index */
                      , ST25R3916_REG_OVERSHOOT_CONF1,  0xFF, 0x00                                                                              /* Disable Overshoot Protection  */
                      , ST25R3916_REG_OVERSHOOT_CONF2,  0xFF, 0x00                                                                              /* Disable Overshoot Protection  */
                      , ST25R3916_REG_UNDERSHOOT_CONF1, 0xFF, 0x00                                                                              /* Disable Undershoot Protection */
                      , ST25R3916_REG_UNDERSHOOT_CONF2, 0xFF, 0x00                                                                              /* Disable Undershoot Protection */
                      )
                                                                                                                                                
                                                                                                                                                
    /****** Default Analog Configuration for Listen AP2P Rx Common ******/
    , MODE_ENTRY_3_REG( (RFAL_ANALOG_CONFIG_LISTEN | RFAL_ANALOG_CONFIG_TECH_AP2P | RFAL_ANALOG_CONFIG_BITRATE_COMMON | RFAL_ANALOG_CONFIG_RX)
                      , ST25R3916_REG_RX_CONF1, ST25R3916_REG_RX_CONF1_lp_mask, ST25R3916_REG_RX_CONF1_lp_1200khz                               /* Set Rx filter configuration */
                      , ST25R3916_REG_RX_CONF1, ST25R3916_REG_RX_CONF1_hz_mask, ST25R3916_REG_RX_CONF1_hz_12_200khz                             /* Set Rx filter configuration */
                      , ST25R3916_REG_RX_CONF2, ST25R3916_REG_RX_CONF2_amd_sel, ST25R3916_REG_RX_CONF2_amd_sel_mixer                            /* AM demodulator: mixer */
                      )
                                                                                                                                                
    /****** Default Analog Configuration for Listen AP2P Tx 106 ******/
    , MODE_ENTRY_5_REG( (RFAL_ANALOG_CONFIG_LISTEN | RFAL_ANALOG_CONFIG_TECH_AP2P | RFAL_ANALOG_CONFIG_BITRATE_106 | RFAL_ANALOG_CONFIG_TX)
                      , ST25R3916_REG_MODE, ST25R3916_REG_MODE_tr_am , ST25R3916_REG_MODE_tr_am_ook                                             /* Use OOK modulation */
                      , ST25R3916_REG_OVERSHOOT_CONF1,  0xFF, 0x40                                                                              /* Set default Overshoot Protection  */
                      , ST25R3916_REG_OVERSHOOT_CONF2,  0xFF, 0x03                                                                              /* Set default Overshoot Protection  */
                      , ST25R3916_REG_UNDERSHOOT_CONF1, 0xFF, 0x40                                                                              /* Set default Undershoot Protection */
                      , ST25R3916_REG_UNDERSHOOT_CONF2, 0xFF, 0x03                                                                              /* Set default Undershoot Protection */
                      )
                                                                                                                                                
    /****** Default Analog Configuration for Listen AP2P Tx 212 ******/
    , MODE_ENTRY_1_REG( (RFAL_ANALOG_CONFIG_LISTEN | RFAL_ANALOG_CONFIG_TECH_AP2P | RFAL_ANALOG_CONFIG_BITRATE_212 | RFAL_ANALOG_CONFIG_TX)
                     , ST25R3916_REG_MODE, ST25R3916_REG_MODE_tr_am , ST25R3916_REG_MODE_tr_am_am                                               /* Use AM modulation */
                     )
                                                                                                                                                
    /****** Default Analog Configuration for Listen AP2P Tx 424 ******/
    , MODE_ENTRY_1_REG( (RFAL_ANALOG_CONFIG_LISTEN | RFAL_ANALOG_CONFIG_TECH_AP2P | RFAL_ANALOG_CONFIG_BITRATE_424 | RFAL_ANALOG_CONFIG_TX)
                     , ST25R3916_REG_MODE, ST25R3916_REG_MODE_tr_am , ST25R3916_REG_MODE_tr_am_am                                               /* Use AM modulation */
                     )

};

#endif /* ST25R3916_ANALOGCONFIG_H */